Solvent effects on diffusion channel construction of organosilica membrane with excellent CO2 separation properties

Rational synthesis of methylsilsesquioxane aerogels addressing thermal load and compression recovery issues in Li-ion batteries

Li-ion batteries suffer from two key safety issues: thermal overload and compression recovery, which may lead to flammability and mechanical failure. Silica aerogels are promising solutions to both these issues owing to their excellent thermal stability and tailored mechanical properties. However, finding the optimum sol composition in sol-gel-based aerogel synthesis is needed to address these issues at industry-relevant scales. Here, we propose an innovative approach to determine the optimum sol composition for methylsilsesquioxane (MSQ) aerogel sheets, which is based on the mechanisms of the effects of molar ratios of hydrolysis water and isopropyl alcohol (IPA) to methyltrimethoxysilane (MTMS) on the physical properties of MSQ aerogel sheets and according to the ternary contour distribution of their properties. The synthesized MSQ aerogels exhibited a soft, light, and powderless texture and featured superhydrophobic properties (150.2°), low thermal conductivity of 33.6 mW/(m·K), high thermal stability temperature in nitrogen atmosphere at 479.3 °C and moderate short-term (<6 h) service temperature of 120.0 °C. Significantly, the structural stability and elasticity of the aerogels surpassed the current state-of-the-art, showing recovery to 81.3 % of the original thickness and 85.2 % of the original stress after being subjected to 400 cycles of high-speed and high-strain consecutive compression, respectively. These excellent properties make the MSQ aerogel sheets promising for applications in thermal load and compression recovery management of diverse energy storage devices, including batteries for next-generation electric vehicles.

CuO Modified by 7,7,8,8-Tetracyanoquinodimethane and Its Application to CO2 Separation

7,7,8,8-Tetracyanoquinomethane (TCNQ) was added to polyvinylpyrrolidone (PVP)/CuO composites to modify and prevent agglomeration of the particles, and thus the CuO particles were well dispersed to a small size, thereby increasing CO₂ solubility and separation performance. When the separation performance of the PVP/CuO/TCNQ composite membrane was measured for CO₂/N₂ gases, a CO₂ separation of about 174 was measured. This improvement in performance was attributed to the fact that TCNQ was applied to PVP and CuO to prevent agglomeration between particles with surface modification. Due to TCNQ, CuO could be dispersed to a small size in PVP; the bonds between chains in PVP weakened; the interaction between molecules weakened; and the free volume increased, as confirmed by FT-IR, TGA, and UV-Vis spectroscopy.

Network Structure Engineering of Organosilica Membranes for Enhanced CO2 Capture Performance

The membrane separation process for targeted CO2 capture application has attracted much attention due to the significant advantages of saving energy and reducing consumption. High-performance separation membranes are a key factor in the membrane separation system. In the present study, we conducted a detailed examination of the effect of calcination temperatures on the network structures of organosilica membranes. Bis(triethoxysilyl)acetylene (BTESA) was selected as a precursor for membrane fabrication via the sol-gel strategy. Calcination temperatures affected the silanol density and the membrane pore size, which was evidenced by the characterization of FT-IR, TG, N2 sorption, and molecular size dependent gas permeance. BTESA membrane fabricated at 500 °C showed a loose structure attributed to the decomposed acetylene bridges and featured an ultrahigh CO2 permeance around 15,531 GPU, but low CO2/N2 selectivity of 3.8. BTESA membrane calcined at 100 °C exhibited satisfactory CO2 permeance of 3434 GPU and the CO2/N2 selectivity of 22, displaying great potential for practical CO2 capture application.

Effect of process parameters over carbon-based ZIF-62 nano-rooted membrane for environmental pollutants separation

The paper evaluates the routes towards the evaluation of membranes using ZIF-62 metal organic framework (MOF) nano-hybrid dots for environmental remediation. Optimization of interaction of operating parameters over the rooted membrane is challenging issue. Subsequently, the interaction of operating parameters including temperature, pressure and CO₂ gas concentration over the resultant rooted membranes are evaluated and optimized using response surface methodology for environmental remediation. In addition, the stability and effect of hydrocarbons on the performance of the resulting membrane during the gas mixture separation are evaluated at optimum conditions to meet the industrial requirements. The characterization results verified the fabrication of the ZIF-62 MOF rooted composite membrane. The permeation results demonstrated that the CO₂ permeability and CO₂/CH₄ selectivity of the composite membrane was increased from 15.8 to 84.8 Barrer and 12.2 to 35.3 upon integration of ZIF-62 nano-glass into cellulose acetate (CA) polymer. Subsequently, the optimum conditions have been found at a temperature of 30 °C, the pressure of 12.6 bar and CO₂ feed concentration of 53.3 vol%. These optimum conditions revealed the highest CO₂ permeability, CH₄ permeability and CO₂/CH₄ separation factor of 47.9 Barrer, 0.2 Barrer and 26.8. The presence of hydrocarbons in gas mixture dropped the CO₂ permeability of 56.5% and separation factor of 46.4% during 206 h of testing. The separation performance of the composite membrane remained stable without the presence of hydrocarbons for 206 h.