Synthesis and gas separation performances of intrinsically microporous polyimides based on 4-methylcatechol-derived monomers

Intrinsically Microporous Polyimides Derived from 2,2'-Dibromo-4,4',5,5'-bipohenyltetracarboxylic Dianhydride for Gas Separation Membranes

This work aims to expand the structure-property relationships of bromo-containing polyimides and the influence of bromine atoms on the gas separation properties of such materials. A series of intrinsically microporous polyimides were synthesized from 2,2'-dibromo-4,4',5,5'-bipohenyltetracarboxylic dianhydride (Br-BPDA) and five bulky diamines, (7,7'-(mesitylmethylene)bis(8-methyldibenzo[b,e][1,4]dioxin-2-amine) (MMBMA), 7,7'-(Mesitylmethylene)bis(1,8-dimethyldibenzo[b,e][1,4] dioxin-2-amine) (MMBDA), 4,10-dimethyl-6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diamine (TBDA1), 4,10-dimethyl-6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-3,9-diamine (TBDA2), and (9R,10R)-9,10-dihydro-9,10-[1,2]benzenoanthracene-2,6-diamine (DAT). The Br-BPDA-derived polyimides exhibited excellent solubility, high thermal stability, and good mechanical properties, with their tensile strength and modulus being 59.2-109.3 MPa and 1.8-2.2 GPa, respectively. The fractional free volumes (FFVs) and surface areas (SBET) of the Br-BPDA-derived polyimides were in the range of 0.169-0.216 and 211-342 m2 g-1, following the order of MMBDA > MMBMA > TBDA2 > DAT > TBDA1, wherein the Br-BPDA-MMBDA exhibited the highest SBET and FFV and thus highest CO2 permeability of 724.5 Barrer. Moreover, Br-BPDA-DAT displayed the best gas separation performance, with CO2, H2, O2, N2, and CH4 permeabilities of 349.8, 384.4, 69.8, 16.3, and 19.7 Barrer, and H2/N2 selectivity of 21.4. This can be ascribed to the ultra-micropores (<0.7 nm) caused by the high rigidity of Br-BPDA-DAT. In addition, all the bromo-containing polymers of intrinsic microporosity membranes exhibited excellent resistance to physical ageing.

A Rigid and Planar Aza-Based Ternary Anhydride for the Preparation of Cross-Linked Polyimide Membrane Displaying High CO2/CH4 Separation Performance

In this study, based on the preparation of hexaazatriphenylene-ternary-anhydride (HAT-T), polyimide membranes were prepared by reaction of 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA), 4,4′-diaminodiphenyl sulfide (SDA), 2,2′-bis (trifluoromethyl)diaminobiphenyl (TFDB) and 5-amino-2-(4-aminophenyl) benzimidazole (PABZ). Polyimide films with a hexazobenzo structure have good film-forming properties, high molecular weight (Mn = 0.79–11.79 × 106, Mw = 1.03–16.60 × 106) and narrow molecular weight distribution (polymer dispersity index = 1.17–1.54). With the introduction of rigid HAT-T, the tensile strength and elongation at break of polyimide films are 195.63–510.37 MPa and 4.00–9.70%, respectively, with excellent mechanical properties. The gas separation performance test shows that hexaazatriphenylene-containing polyimide films have good gas selectivity for CO2/CH4. In particular, the separation performance of PIc-t (6FDA/PABZ/HAT-T) surpasses the “2008 Robeson Upper Bound”. The selectivity of 188.43 for CO2/CH4 gas reveals its potential value in the separation and purification of methane gas.

Synthesis, microstructures, and gas separation performance of norbornyl bis-benzocyclobutene-Tröger’s base polymers derived from pure regioisomers

Chain configuration significantly influences the microstructures and gas separation performance of polymers of intrinsic microporosity. Herein, pure regioisomers of norbornyl bis-benzocyclobutene-containing (N2BC) diamines, i.e. anti-CANAL-4-MeNH2, syn-CANAL-4-MeNH2, anti-CANAL-2-Me2NH2, and syn-CANAL-2-Me2NH2, were...

Probing the performance of imide linked micro-porous polymers for enhanced CO2 gas adsorption applications

Microporous polyimides were synthesized and utilized for CO2 gas adsorption.