Insight of organic molecule dissolution and diffusion in cross-linked polydimethylsiloxane using molecular simulation

Sponge-Inspired Porous Sensor for Wide-Spectrum Detection of Organic Liquids, Gases, and Isomers

Currently, the identification of organics, including gases, liquids, and isomers, relies heavily on sophisticated analytical equipment or meticulously crafted yet costly materials such as COFs and MOFs. Consequently, developing a straightforward strategy to accurately identify organic gases, liquids, and isomers simultaneously presents a significant challenge. Inspired by the porous structure of the sponge that allows it to absorb multiple liquids quickly, a broad-spectrum micro-nano porous-structure sensor (BPS) is designed using polydimethylsiloxane (PDMS), highly conductive nanoparticle carbon black (CB) and micron-sized thermal expansion microspheres (EM), which utilizes the micro-nano porous structure to enhance the unique swelling interaction between PDMS and various organic compounds, to accurately identify organic gas/liquids, isomers, aqueous solutions, mixed liquids, and even perform quantitative analysis. There are no reports of sensors, such as BPS, capable of simultaneously detecting multiple types of organic matter. The BPS also demonstrates robust performance, retaining its self-cleaning property even after soaking in water, acids, and alkalis. The wide spectrum and high sensitivity of BPS in detecting and identifying volatile organic molecules make it have great potential in the chemical industry, coal, transportation, and other fields.

The swelling mechanism of ethylene-vinyl acetate polymer in different solvents via molecular dynamics and experimental studies

Ethylene-vinyl acetate (EVA) film is the predominant encapsulation material in crystalline silicon photovoltaic modules, the efficient and eco-friendly processing of which is essential for the recycling of the modules. Among the various existing techniques, the chemical approach uses solvents to induce swelling and dissolution on the EVA film to facilitate the separation of distinct layers. This method demonstrates the potential for achieving low-energy consumption and minimal-damage retrieval of the diverse materials within the components. Nonetheless, the mechanism underlying the swelling of the EVA polymer and the consequent delamination of various layers remains elusive, hindering the proper choice of solvents. In this study, the swelling behaviors of the EVA polymer in water, ethanol, and D-limonene solvents were analyzed via molecular dynamics (MD) simulations. The influence of intermolecular interactions on the swelling degree of the EVA polymers had been examined to determine the dominant factors leading to the discrepancies in the diffusion state of EVA in different solvents. The molecular electrostatic potential (MEP) maps were utilized to explain the differences in interactions from a molecular structure perspective. Furthermore, the results of MD simulations were experimentally verified by solvent-immersion experiments and testing methods. Based on the results, the swelling mechanism of the EVA polymer in the selected solvents was proposed and illustrated, providing theoretical support for chemically-driven photovoltaic module recycling processes.

Deciphering the interplay between wastewater compositions and oxytetracycline in recovered struvite: Unveiling mechanisms and introducing control strategies

Struvite recovery from wastewater offers a sustainable phosphorus and nitrogen source, yet it harbors the challenge of variable antibiotic residues, notably oxytetracycline (OTC), increasing the ecological risk during subsequent use. Despite the need, mechanisms behind these residues and regulatory solutions remain obscure. We characterized OTC in recovered struvite and showed that increased dissolved organic matter (DOM) enhanced OTC accumulation, while PO43- suppressed it. NH4+ modulated OTC levels through the saturation index (SI), with a rise in SI significantly reducing OTC content. Additionally, excess Mg2+ formed complexes with OTC and DOM (humic acid, HA), leading to increased residue levels. Complexation was stronger at higher pH, whereas electrostatic interactions dominated at lower pH. The primary binding sites for antibiotics and DOM were Mg-OH and P-OH groups in struvite. OTC's dimethylamino, amide, and phenolic diketone groups primarily bound to struvite and DOM, with the carboxyl group of DOM serving as the main binding site. Mg2+ complexation was the primary pathway for OTC transportation, whereas electrostatic attraction of PO43- dominated during growth. Controlling magnesium (Mg) dosage and adjusting pH were effective for reducing OTC in recovered products. Our findings provided insights into the intricate interactions between struvite and antibiotics, laying the groundwork for further minimizing antibiotic residues in recovered phosphorus products.

An intrinsically semi-permeable PDMS nanosheet encapsulating adipose tissue-derived stem cells for enhanced angiogenesis

Cell encapsulation devices are expected to be promising tools that can control the release of therapeutic proteins secreted from transplanted cells. The protein permeability of the device membrane is important because it allows the isolation of transplanted cells while enabling the effectiveness of the device. In this study, we investigated free-standing polymeric ultra-thin films (nanosheets) as an intrinsically semi-permeable membrane made from polydimethylsiloxane (PDMS). The PDMS nanosheet with a thickness of 600 nm showed intrinsic protein permeability, and the device fabricated with the PDMS nanosheet showed that VEGF secreted from implanted adipose tissue-derived stem cells (ASCs) could be released for at least 5 days. The ASC encapsulation device promoted angiogenesis and the development of granulation tissue 1 week after transplantation to the subcutaneous area of a mouse. This cell encapsulation device consisting of PDMS nanosheets provides a new method for pre-vascularization of the subcutaneous area in cell transplantation therapy.

Temperature and pH Stimuli-Responsive System Delivers Location-Specific Antimicrobial Activity with Natural Products

Smart materials with controlled stimuli-responsive functions are at the forefront of technological development. In this work, we present a generic strategy that combines simple components, physicochemical responses, and easy fabrication methods to achieve a dual stimuli-responsive system capable of location-specific antimicrobial cargo delivery. The encapsulated system is fabricated by combining a biocompatible inert polymeric matrix of poly(dimethylsiloxane) (PDMS) and a bioactive cargo of saturated fatty acids. We demonstrate the effectiveness of our approach to deliver antimicrobial activity for the model bacteria Escherichia coli. The system responds to two control variables, temperature and pH, delivering two levels of antimicrobial response under distinct combinations of stimuli: one response toward the planktonic media and another response directly at the surface for sessile bacteria. Spatially resolved Raman spectroscopy alongside thermal and structural material analysis reveals that the system not only exhibits ON/OFF states but can also control relocation and targeting of the active cargo toward either the surface or the liquid media, leading to different ON/OFF states for the planktonic and sessile bacteria. The approach proposed herein is technologically simple and scalable, facing low regulatory barriers within the food and healthcare sectors by using approved components and relying on fundamental chemical processes. Our results also provide a proof-of-concept platform for the design and easy fabrication of delivery systems capable of operating as Boolean logic gates, delivering different responses under different environmental conditions.

Radiolabeling of Micro-/Nanoplastics via In-Diffusion

Micro- and nanoplastics are emerging pollutants with a concerning persistence in the environment. Research into their environmental impact requires addressing challenges related to sensitively and selectively detecting them in complex ecological media. One solution with great potential for alleviating these issues is using radiolabeling strategies. Here, we report the successful introduction of a 64Cu radiotracer into common microplastics, namely polyethylene, polyethylene terephthalate, polystyrene, polyamide, and polyvinylidene dichloride, which allows the sensitive detection of mere nanograms of substance. Utilizing a Hansen Solubility Parameter screening, we developed a swelling and in-diffusion process for tetraphenylporphyrin-complexed 64Cu, which permits one-pot labeling of polymer particles.

Microbial growth and adhesion of Escherichia coli in elastomeric silicone foams with commonly used additives

Silicone is often used in environments where water repellency is an advantage. Contact with water promotes the adhesion of microorganisms and biofilm formation. Depending on the application, this may increase the possibility of food poisoning and infections, the material's degrading appearance, and the likelihood of manufacturing defects. The prevention of microbial adhesion and biofilm formation is also essential for silicone-based elastomeric foams, which are used in direct contact with human bodies but are often difficult to clean. In this study, the microbial attachment in and the retention from the pores of silicone foams of different compositions is described and compared to those of commonly used polyurethane foams. The growth of the gram-negative Escherichia coli in the pores and their leaching during wash cycles is characterised by bacterial growth/inhibition, adhesion assay, and SEM imaging. The structural and surface properties of the materials are compared. Despite using common antibacterial additives, we have found that non-soluble particles stay isolated in the silicone elastomer layer, thus affecting surface microroughness. Water-soluble tannic acid dissolves into the medium and seems to aid in inhibiting planktonic bacterial growth, with a clear indication of the availability of tannic acid on the surfaces of SIFs.

Molecular Simulation for Guiding the Design and Optimization of Mixed Matrix Membranes (MMMs) in the Pervaporation Process

Molecular simulation has been used extensively in the study of pervaporation membranes as a new economical and environmentally friendly research method. In this paper, A-SiO₂/PDMS-PTFE mixed matrix membranes (MMMs) were prepared by molecular-simulation-guided experiments to achieve the separation of dimethyl carbonate/methanol (DMC/MeOH)) azeotropes. The interaction energy, X-ray diffraction pattern mean square displacement, and density field between PDMS and inorganic particles were analyzed by molecular dynamics simulations. The dissolution and diffusion processes of the DMC/MeOH azeotropes system in the MMM were simulated, and the surface-silylated silica (A-SiO₂) with relatively better performance was screened. Based on the simulation results, A-SiO₂/PDMS-PTFE MMMs were prepared by the coblending method, and the pervaporation separation performance of MMM membranes for DMC/MeOH azeotropes with different A-SiO₂ loadings was investigated. When the A-SiO₂ loading was 15 wt %, the separation factor of DMC/MeOH azeotropes at 50 °C was 4.74 and the flux was 1178 g m^-2 h^-1, which was consistent with the expected results of the simulation. The MMMs showed good stability in pervaporation over a period of up to 120 h. This study demonstrates that molecular simulations can provide a viable means for pretest screening and validation of experimental mechanisms, and to a certain extent, guide the design and optimization of pervaporation membranes.

Highly flexible and superhydrophobic MOF nanosheet membrane for ultrafast alcohol-water separation

High-performance pervaporation membranes have potential in industrial separation applications, but overcoming the permeability-selectivity trade-off is a challenge. We report a strategy to create highly flexible metal-organic framework nanosheet (MOF-NS) membranes with a faveolate structure on polymer substrates for alcohol-water separation. The controlled growth followed by a surface-coating method effectively produced flexible and defect-free superhydrophobic MOF-NS membranes. The reversible deformation of the flexible MOF-NS and the vertical interlamellar pathways were captured with electron microscopy. Molecular simulations confirmed the structure and revealed transport mechanism. The ultrafast transport channels in MOF-NS exhibited an ultrahigh flux and a separation factor of 8.9 in the pervaporation of 5 weight % ethanol-water at 40°C, which can be used for biofuel recovery. MOF-NS and polydimethylsiloxane synergistically contribute to the separation performance.

Reactive silver inks for antiviral, repellent medical textiles with ultrasonic bleach washing durability compared to silver nanoparticles

Medical textiles are subject to particularly harsh disinfection procedures in healthcare settings where exposure risks are high. This work demonstrates a fabric treatment consisting of a reactive silver ink and low surface energy PDMS polymer that provides for superhydrophobicity and antiviral properties against enveloped herpes simplex virus stocks even after extended ultrasonic bleach washing. The antiviral properties of reactive silver ink has not been previously reported or compared with silver nanoparticles. The fabric treatment exhibits high static contact angles and low contact angle hysteresis with water, even after 300 minutes of ultrasonic bleach washing. Similarly, after this bleach washing treatment, the fabric treatment shows reductions of infectious virus quantities by about 2 logs compared to controls for enveloped viruses. The use of silver ink provides for better antiviral efficacy and durability compared to silver nanoparticles due to the use of reactive ionic silver, which demonstrates more conformal coverage of fabric microfibers and better adhesion. This study provides insights for improving the wash durability of antiviral silver fabric treatments and demonstrates a bleach wash durable, repellent antiviral treatment for reusable, functional personal protective equipment applications.