Membrane cleaning strategy via in situ oscillation driven by piezoelectricity

Application of catalytic technology based on the piezoelectric effect in wastewater purification

The demands of human life and industrial activities result in a significant influx of toxic contaminants into aquatic ecosystems. In particular, organic pollutants such as antibiotics and dye molecules, bacteria, and heavy metal ions are represented, posing a severe risk to the health and continued existence of living organisms. The method of removing pollutants from water bodies by utilizing the principle of the piezoelectric effect in combination with chemical catalytic processes is superior to other wastewater purification technologies because it can collect water energy, mechanical energy, etc. to achieve cleanliness and high removal efficiency. Herein, we briefly introduced the piezoelectric mechanisms and then reviewed the latest advances in the design and synthesis of piezoelectric materials, followed by a summary of applications based on the principle of piezoelectric effect to degrade pollutants in water for wastewater purification. Moreover, water purification technologies incorporating the piezoelectric effect, including piezoelectric effect-assisted membrane filtration, activation of persulfate, and battery electrocatalysis are elaborated. Finally, future challenges and research directions for the piezoelectric effect are proposed.

Piezoceramic membrane with built-in ultrasound for reactive oxygen species generation and synergistic vibration anti-fouling

Piezoceramic membranes have emerged as a prominent solution for membrane fouling control. However, the prevalent use of toxic lead and limitations of vibration-based anti-fouling mechanism impede their wider adoption in water treatment. This study introduces a Mn/BaTiO3 piezoceramic membrane, demonstrating a promising in-situ anti-fouling efficacy and mechanism insights. When applied to an Alternating Current at a resonant frequency of 20 V, 265 kHz, the membrane achieves optimal vibration, effectively mitigating various foulants such as high-concentration oil (2500 ppm, including real industrial oil wastewater), bacteria and different charged inorganic colloidal particles, showing advantages over other reported piezoceramic membranes. Importantly, our findings suggest that the built-in ultrasonic vibration of piezoceramic membranes can generate reactive oxygen species. This offers profound insights into the distinct anti-fouling processes for organic and inorganic wastewater, supplementing and unifying the traditional singular vibrational anti-fouling mechanism of piezoceramic membranes, and potentially propelling the development of piezoelectric catalytic membranes.

Membrane processes enhanced by various forms of physical energy: A systematic review on mechanisms, implementation, application and energy efficiency

Membrane technologies in water and wastewater treatment have been eagerly pursued over the past decades, yet membrane fouling remains the major bottleneck to overcome. Membrane fouling control methods which couple membrane processes with online in situ application of external physical energy input (EPEI) are getting closer and closer to reality, thanks to recent advances in novel materials and energy deliverance methods. In this review, we summarized recent studies on membrane fouling control techniques that depend on (i) electric field, (ii) acoustic field, (iii) magnetic field, and (iv) photo-irradiation (mostly ultraviolet or visible light). Mechanisms of each energy input were first reported, which defines the applicability of these methods to certain wastewater matrices. Then, means of implementation were discussed to evaluate the compatibility of these fouling control methods with established membrane techniques. After that, preferred applications of each energy input to different foulant types and membrane processes in the experiment reports were summarized, along with a discussion on the trends and knowledge gaps of such fouling control research. Next, specific energy consumption in membrane fouling control and flux enhancement was estimated and compared, based on the experimental results reported in the literature. Lastly, strength and weakness of these methods and future perspectives were presented as open questions.

Piezoelectric Polyvinylidene Fluoride Membranes with Self-Powered and Electrified Antifouling Performance in Pressure-Driven Ultrafiltration Processes

Electroactive membranes have the potential to address membrane fouling via electrokinetic phenomena. However, additional energy consumption and complex material design represent chief barriers to achieving sustainable and economically viable antifouling performance. Herein, we present a novel strategy for fabricating a piezoelectric antifouling polyvinylidene fluoride (PVDF) membrane (Pi-UFM) by integrating the ion-dipole interactions (NaCl coagulation bath) and mild poling (in situ electric field) into a one-step phase separation process. This Pi-UFM with an intact porous structure could be self-powered in a typical ultrafiltration (UF) process via the responsivity to pressure stimuli, where the dominant β-PVDF phase and the out-of-plane aligned dipoles were demonstrated to be critical to obtain piezoelectricity. By challenging with different feed solutions, the Pi-UFM achieved enhanced antifouling capacity for organic foulants even with high ionic strength, suggesting that electrostatic repulsion and hydration repulsion were behind the antifouling mechanism. Furthermore, the TMP-dependent output performance of the Pi-UFM in both air and water confirmed its ability for converting ambient mechanical energy to in situ surface potential (ζ), demonstrating that this antifouling performance was a result of the membrane electromechanical transducer actions. Therefore, this study provides useful insight and strategy to enable piezoelectric materials for membrane filtration applications with energy efficiency and extend functionalities.

Antifouling BaTiO3/PVDF piezoelectric membrane for ultrafiltration of oily bilge water

Barium titanate/polyvinylidene fluoride (BaTiO₃/PVDF) piezoelectric membrane was successfully prepared and generated in-situ vibrations to reduce membrane fouling by applying alternating current (AC) signal for oily bilge water ultrafiltration. The effect of in-situ vibration on membrane fouling was investigated through changing in the excitation alternating voltage and its frequency, pH, crossflow rate. The results indicated that the piezoelectric membrane by applying AC signal remarkably alleviated the membrane fouling for bilge water ultrafiltration. The membrane fouling decreased with increasing the AC signal voltage. The final steady-state permeate flux from the piezoelectric membrane for bilge water ultrafiltration increased with the AC signal voltage, raising it by up to 63.4% at AC signal voltage of 20 V compared to that of the membrane without applying AC voltage. The high permeate flux was obtained at the resonant frequency of 220 kHz. During the 50-h ultrafiltration of bilge water with the piezoelectric membrane excited at 220 kHz and 15 V, the permeate flux from the membrane was stable. The oil concentration in outflow from the piezoelectric membrane was below 14 ppm, which met the discharged level required by IMO convention. The total organic carbon removal rate in bilge water was over 94%.

Antifouling performance of in situ synthesized chitosan-zinc oxide hydrogel film against alga M. aeruginosa

The undesirable settlement and growth of microalgae on submerged installations is a universal problem in water environment. Soft hydrogels are promising fouling-resistant materials due to the inherent surface properties. Herein, a kind of chitosan hydrogels with increasing zinc oxide (ZnO) mineral phase content were prepared by in situ sol-gel and solvent casting method, to prevent growth of algae Microcystis. aeruginosa. Incorporation with ZnO mineral phase improved mechanical property, water absorption, and stability of the obtained chitosan-zinc oxide (CS@ZnO) hydrogel films in Zn dose-dependent manner. The highest strength and growth inhibition (63.45 ± 8.93%) were observed by CS@ZnO-1.5 hydrogel films with the concentrations of 1.5% precursor in comparison with other hydrogel films. During this process, algal cell membrane was slightly damaged (24.5 ± 1.57%) and accompanied by significantly synthesis inhibition such as chlorophyll a (55.22 ± 2.72%) and total soluble protein (42.97 ± 1.66%). To sum up, synthesis inhibition of algal cell is the main mechanism of CS@ZnO hydrogel films inhibiting algal growth, which has the potential in antibiofouling application.