Surface grafting with diverse charged chemical groups mitigates calcium phosphate scaling on reverse osmosis membranes during municipal wastewater desalination

Mixed-charge hyperbranched polymer nanoparticles with selective antibacterial action for fighting antimicrobial resistance

The escalating menace of antimicrobial resistance (AMR) presents a profound global threat to life and assets. However, the incapacity of metal ions/reactive oxygen species (ROS) or the indiscriminate intrinsic interaction of cationic groups to distinguish between bacteria and mammalian cells undermines the essential selectivity required in these nanomaterials for an ideal antimicrobial agent. Hence, we devised and synthesized a range of biocompatible mixed-charge hyperbranched polymer nanoparticles (MCHPNs) incorporating cationic, anionic, and neutral alkyl groups to effectively combat multidrug-resistant bacteria and mitigate AMR. This outcome stemmed from the structural, antibacterial activity, and biocompatibility analysis of seven MCHPNs, among which MCHPN7, with a ratio of cationic groups, anionic groups, and long alkyl chains at 27:59:14, emerged as the lead candidate. Importantly, owing to inherent differences in membrane potential among diverse species, alongside its nano-size (6-15 nm) and high hydrophilicity (Kow = 0.04), MCHPN7 exhibited exceptional selective bactericidal effects over mammalian cells (selectivity index > 564) in vitro and in vivo. By inducing physical membrane disruption, MCHPN7 effectively eradicated antibiotic-resistant bacteria and significantly delayed the emergence of bacterial resistance. Utilized as a coating, MCHPN7 endowed initially inert surfaces with the ability to impede biofilm formation and mitigate infection-related immune responses in mouse models. This research heralds the advent of biocompatible polymer nanoparticles and harbors significant implications in our ongoing combat against AMR. STATEMENT OF SIGNIFICANCE: The escalating prevalence of antimicrobial resistance (AMR) has been acknowledged as one of the most significant threats to global health. Therefore, a series of mixed-charge hyperbranched polymer nanoparticles (MCHPNs) with selective antibacterial action were designed and synthesized. Owing to inherent differences in membrane potential among diverse species and high hydrophilicity (Kow = 0.04), the optimal nanoparticles exhibited exceptional selective bactericidal effects over mammalian cells (selectivity index >564) and significantly delayed the emergence of bacterial resistance. Importantly, they endowed surfaces with the ability to impede biofilm formation and mitigate infection-related immune responses. Furthermore, the above findings focus on addressing the problem of AMR in Post-Pandemic, which will for sure attract attention from both academic and industry research.

A preliminary attempt at capacitive deionization with PVA/PSS gel coating as an alternative to ion exchange membrane

PVA/PSS composite gel membrane electrode for membrane capacitive deionization (MCDI) was fabricated and characterised in the present study. The composite electrode with ion exchange surface is prepared by coating glutaraldehyde cross-linked polyvinyl alcohol (PVA) composite hydrogel, with Poly (Sodium 4-Styrenesulfonate) (PSS) added into the network, on the surface of activated carbon (AC) electrode. The feasibility of the gel membrane is analyzed by rheological, swelling rates and ion exchange capacity tests. Then electrochemical test and desalination test are used to study the performance of the MCDI electrode. The results show that coating of composite hydrogel layer improved the hydrophilicity, specific capacitance and lower interfacial electron transfer resistance of the electrode. Finally, we assemble the asymmetrical CDI cell with PVA/PSS composite gel electrode and AC electrode. Compared with the AC electrode, the salt adsorption capacity of PVA6-PSS15 can reach 18.9 mg g-1 and stable charge efficiency at 73.0% at operating voltage of 1.2 V. The decrease in specific capacitance of PVA6-PSS15 after 50 cycles is 1.33%, indicating that the electrode has a good cycling life. The gel membrane coated electrode prepared by PSS provides a new idea for the development of MCDI.

Nitrate removal from contaminated groundwater by micellar-enhanced ultrafiltration using a polyacrylonitrile membrane with a hydrogel-stabilized ZIF-L layer

Contamination of groundwater by nitrate from intensive agriculture is a serious problem globally. Excessive fertilization has led to nitrate contamination of the Coastal Aquifer in Israel. Here we report the efficient removal of nitrate from contaminated groundwater by micellar-enhanced ultrafiltration (MEUF) using a specially tailored membrane. Graft polymerization with hydrophilic poly(methacrylate) and incorporation of porous zeolitic imidazole framework ZIF-L nanoparticles imparted antifouling properties to the membrane. The resulting modified membrane showed high water permeance (82.2 ± 1.7 L·m-2·h-1·bar-1). The efficiency of nitrate removal by MEUF was tested using cetylpyridinium chloride as a surfactant in nitrate-contaminated groundwater collected from the Coastal Aquifer of Israel. The membrane reduced nitrate levels from 40-70 to levels of 6.8-29.5 mg·L-1, depending on the groundwater composition; further reduction to 6.1-24.1 mg·L-1 with complete surfactant rejection was achieved via two-stage membrane filtration, which showed high permeate flux (between 32.1 ± 0.9 and 45.9 ± 0.6 L·m-2·h-1) at 2 bar. The membrane maintained stable separation performance during multiple cycles, and the flux recovery ratio was >93 %. Nitrate concentrations fell well below the acceptable limit for drinking water, allowing the treated water to be used without restriction. Overall, the membrane has the potential to allow efficient removal by MEUF of nitrate from contaminated groundwater.

Colloidal aspects of calcium carbonate scaling in water-in-oil emulsions: A fundamental study using droplet-based microfluidics

HYPOTHESIS

As a mainstream process in the extraction and recovery of crude oil, water is injected into reservoirs in the so-called waterflooding process to facilitate the oil displacement through the wellbore, typically generating water-in-oil (W/O) emulsions. Based on economic considerations, sea water is used in the flooding process; however, the ionic incompatibility between the injected water and the formation water inside the reservoir may precipitate sparingly-soluble inorganic salts (scale). We hypothesize that calcium carbonate (CaCO₃) scale dynamically interacts with cationic surfactants in W/O emulsions, resulting in (i) scale growth retardation and (ii) emulsion destabilization.

EXPERIMENTS

We developed stable W/O emulsions via combining droplet-based microfluidics with multifactorial optimizations to investigate the influence of emulsion properties, such as surfactant type and concentrations, temperature, and pH, as well as calcium ions on the CaCO₃ scaling kinetics and emulsion stability. The CaCO₃ scale was characterized based on particle size and charge, lattice structure, interactions with the surfactant, and time-dependent effects on emulsion stability.

FINDINGS

The interfacial interactions between the cationic surfactant (cetyltrimethylammonium bromide, CTAB) and CaCO₃ retarded scale growth rate, decreased crystal size, and destabilized emulsion within hours as a result of surfactant depletion at the water-oil interface. The surfactant did not affect the crystal structure of scale, which was formed as the most thermodynamically stable crystalline polymorph, calcite, at the ambient condition. This fundamental study may open new opportunities for engineering stable W/O emulsions, e.g., for enhanced oil recovery (EOR), and developing scale-resistant multiphase flows.

CO2 as an Alternative to Traditional Antiscalants in Pressure-Driven Membrane Processes: An Experimental Study of Lab-Scale Operation and Cleaning Strategies

Scaling, or inorganic fouling, is a major factor limiting the performance of membrane-based water treatment processes in long-term operation. Over the past few decades, extensive studies have been conducted to control the scale growth found in membrane processes and to develop sustainable and greener processes. This study details the role of CO2 in scale inhibition in membrane processes. The core concept of CO2 utilization is to reduce the influent pH and to minimize the risk of scale formation from magnesium or calcium salts. Three reverse osmosis (RO) units were operated with a control (U1), CO2 (U2), and a commercial antiscalant, MDC-220 (U3). The performances of all the units were compared in terms of change in transmembrane pressure (TMP). The overall efficiency trend was found as U1 > U3 > U2. The membrane surfaces were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) for the morphological and elemental compositions, respectively. The surface analysis signified a significant increase in surface smoothness after scale deposition. The noticeable reduction in surface roughness can be described as a result of ionic deposition in the valley region. A sludge-like scale layer was found on the surface of the control membrane (U1) which could not be removed, even after an hour of chemical cleaning. After 20−30 min of cleaning, the U2 membrane was successfully restored to its original state. In brief, this study highlights the sustainable membrane process developed via CO2 utilization for scale inhibition, and the appropriate cleaning approaches.