Fabrication of hollow fiber nanofiltration separation layer with highly positively charged surface for heavy metal ion removal

Research Progress on Metal Ion Recovery Based on Membrane Technology and Adsorption Synergy

The development of modern industry will generate more and more waste containing metal ions. It is necessary to take appropriate measures to recover these ions, whether from the perspective of environmental protection or improving economic benefits. So far, scientists have studied many methods for recovering metal ions. Among these methods, adsorption and membrane separation have received widespread attention due to their own characteristics. Combining adsorption and membrane separation methods can better leverage their respective advantages to improve the ability of recovering metal ions. This review, therefore, focuses on the synergistic recovery of metal ions by adsorption and membrane separation methods. This article first briefly explains the theoretical principles of membrane separation and adsorption synergy, and then focuses on several technologies that have received attention in different chapters. In these chapters, membrane technology is briefly introduced, followed by the situation and progress of synergistic application with adsorption technology. Then, the article compares and elaborates on the advantages and disadvantages of the above technologies, and finally summarizes and looks forward to these technologies being used to solve the difficulties and challenges in industrial application.

Recent Advances in Membranes Used for Nanofiltration to Remove Heavy Metals from Wastewater: A Review

The presence of heavy metal ions in polluted wastewater represents a serious threat to human health, making proper disposal extremely important. The utilization of nanofiltration (NF) membranes has emerged as one of the most effective methods of heavy metal ion removal from wastewater due to their efficient operation, adaptable design, and affordability. NF membranes created from advanced materials are becoming increasingly popular due to their ability to depollute wastewater in a variety of circumstances. Tailoring the NF membrane's properties to efficiently remove heavy metal ions from wastewater, interfacial polymerization, and grafting techniques, along with the addition of nano-fillers, have proven to be the most effective modification methods. This paper presents a review of the modification processes and NF membrane performances for the removal of heavy metals from wastewater, as well as the application of these membranes for heavy metal ion wastewater treatment. Very high treatment efficiencies, such as 99.90%, have been achieved using membranes composed of polyvinyl amine (PVAM) and glutaraldehyde (GA) for Cr³⁺ removal from wastewater. However, nanofiltration membranes have certain drawbacks, such as fouling of the NF membrane. Repeated cleaning of the membrane influences its lifetime.

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals.•The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated.•The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low.•The performance indicator (R²) of the studied responses was higher than 0.95.