Simultaneous removal of natural organic matters and copper (II) with ultrafiltration for drinking water treatment

Regeneratable bioinspired nanochannels for highly sensitive electrochemical detection of glycated albumin

Glycated albumin (GA) has been proposed as a reliable diabetes mellitus marker particularly useful in assessing intermediate glycemic control. Herein, we designed a bioinspired nanochannels for biochemical detection based on the host-guest interaction between β-cyclodextrin and azobenzene. Cyclodextrin was grafted on the inner surface of nanochannels of a nanoporous membrane and azobenzene was tagged to the terminal of GA aptamer, thereby facilitating the orientation of GA aptamer in the nanochannels. The presence of GA was monitored by recording the voltammetric signal of ferricyanide that transported across the nanochannel array. The peak current exhibited a linearity relationship with the GA concentration across a broad range of 1.0 ng mL-1 to 100 μg mL-1, along with a detection limit of 0.18 ng mL-1. Notably, the aptamer could be offloaded under ultraviolet light, regenerating the cyclodextrin functionalized nanochannels for subsequent re-immobilization of the fresh aptamer. The relative standard deviation for seven cycles of regeneration treatment was no more than 1.8 %. The remarkable reusability of the nanochannels offered a cost-effective, sensitive and reproducible aptasensing platform.

Enhanced removal of fluoride ions using lanthanum-doped coconut shell biochar in PVDF ultrafiltration membranes

Fluoride contamination in surface and ground water poses significant health risks, necessitating a low-energy, cost-effective removal method. Herein, an ultrafiltration (UF) adsorptive membrane doped with lanthanum (La)-based coconut shell biochar was synthesized to effectively remove fluoride ions. Based on the results of adsorption and membrane separation performance, it was found that La-based biochar showed a significantly higher adsorption capacity (126.7 mg F/g) compared to bare biochar (27.41 mg F/g), due to the oxygen-containing functional groups from La2O2CO3 that enhance binding sites and electrostatic attraction for fluoride ions. Furthermore, the addition of La-modified adsorbent to the polyvinylidene fluoride (PVDF) UF membrane markedly altered its structure and surface properties, changing the pore structure to porous, narrowing pore size, increasing active adsorption sites, and improving hydrophilicity. These changes boosted fluoride ion rejection from 9.53 % to 62.07 % with tiny effect on membrane permeability. More important, this UF adsorptive membrane exhibited excellent antifouling ability with the lowest flux decline (J/J0 =0.450) compared to pristine PVDF membrane (J/J0 =0.142), which was owing to the better improved surface properties. In all, this study provides a novel strategy for efficient, economic and selective separation of fluoride ions and further extends the application of UF to the field of ion removal.

Magnetic nanoparticle loading and application of weak magnetic field to reconstruct the cake layer of coagulation-ultrafiltration process to achieve efficient antifouling: Performance and mechanism analysis

Abandoning the costly development of new membrane materials and instead directly remodeling the naturally occurring cake layer constitutes a dynamic, low-cost, long-lasting, and proactive strategy to "fight fouling with fouling". Several optimization strategies, including coagulation/modified magnetic seed loading and applying a weak magnetic force (0.01T) at the ultrafiltration end, improved the anti-fouling, retention, and sieving performances of conventional ultrafiltration process during the treatment of source water having complex natural organic matter (NOMs) and small molecule micropollutants. Two modified magnetic seeds we prepared were composite nano-seed particles (Fe3O4@SiO2-NH2 (FS) and Fe3O4@SiO2@PAMAM-NH2 (FSP)). Aim of the study was to regulate the formation of cake layer via comprehensive testing of the antifouling properties of optimized processes and related mechanistic studies. It was found to be essential to enhance the interception of xanthate and tryptophan proteins in the cake layer for improving the anti-fouling performance based on the correlation and redundancy analyses, while the use of modified magnetic seeds and magnetic field showed a significant positive impact on water production. Blockage modeling demonstrated the ability to form a mature cake layer during the initial filtration stage swiftly. This mitigated the risk of irreversible fouling caused by pore blockage during the early stage of coagulation-ultrafiltration. Morphologically, the reconstructed cake layer exhibited elevated surface porosity, an internal cavity channel structure, and enhanced roughness that can promote increased water flux and retention of water impurities. These optimized the maturity of the cake layer in both time and space. Density Functional Theory (DFT), Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, and Modified Extended Derjaguin-Landau-Verwey-Overbeek (MDLVO) calculations indicated aggregation behavior of matter on the cake layer to be enhanced effectively due to magnetic seed loading. This is mainly due to the strengthening of polar interactions, including hydrogen bonding, π-π* conjugation, etc., which can happen between the cake layer loaded with FSP and the organic matter. Under the influence of a magnetic field, magnetic force energy (VMF) significantly impacts the system by eliminating energy barriers. This research will provide innovative strategies for effectively purifying intricate source water through ultrafiltration while controlling membrane fouling.

Fabrication and characterization of microporous soft templated photoactive 3D materials for water disinfection in batch and continuous flow

Water cleaning can be provided in batch mode or in continuous flow. For the latter, some kind of framework must withhold the cleaning agents from washout. Porous structures provide an ideal ratio of surface to volume for optimal access of the water to active sites and are able to facilitate rapid and efficient fluid transport to maintain a constant flow. When functionalized with suitable photoactive agents, they could be used in solar photocatalytic disinfection. In this study, we have used the sugar cube method to fabricate PDMS-based materials that contain three different classes of photosensitizers that differ in absorption wavelength and intensity, charge as well as in ability to generate singlet oxygen. The obtained sponges are characterized by scanning electron microscopy and digital microscopy. Archimede's method was used to measure porosity and density. We show that the materials can absorb visible light and generate Reactive Oxygen Species (ROS) that are required to kill bacteria. The disinfection ability was tested by examining how irradiation time and operation mode (batch vs. flow) contribute to the performance of the material. The current strategy is highly adaptable to other (medium) pressure-driven flow systems and holds promising potential for various applications, including continuous flow photoreactions.

Efficient removal of heavy metals in water utilizing facile cross-link conjugated linoleic acid micelles

Micellar-enhanced ultrafiltration (MEUF) technology is an effective method to treat low-concentration heavy metal wastewater. However, the leakage of surfactants in the ultrafiltration (UF) process will inevitably cause secondary pollution. In this study, a biosurfactant of conjugated linoleic acid (CLA) with conjugated double bonds was selected to bind its micelles by simple thermal crosslinking to obtain morphologically stable stearic acid (SA) nanoparticles. The pure SA nanoparticles were obtained by repeated dialysis. The stability of the SA nanoparticles was verified by comparing the particle size distribution and solubility of the materials before and after crosslinking at different pH levels. The effectiveness of SA nanoparticle-enhanced UF in removing heavy metals was verified by exploring the adsorption performance of SA nanoparticles. The dialysis device was used to simplify the UF device, wherein SA nanoparticles were assessed as adsorbents for the elimination of Cu2+, Pb2+, and Cd2+ ions from aqueous solutions under diverse process parameters, including pH, contact time, metal ion concentration, and coexisting ions. The findings indicate that the SA nanoparticles have no evidence of secondary contamination in UF and exhibit compatibility with a broad pH range and coexisting ions. The maximum adsorption capacities for Cu2+, Pb2+, and Cd2+ were determined to be 152.77, 403.56, and 271.46 mg/g, respectively.

Recent advances in cellulose- and alginate-based hydrogels for water and wastewater treatment: A review

From the environmental perspective, it is essential to develop cheap, eco-friendly, and highly efficient materials for water and wastewater treatment. In this regard, hydrogels and hydrogel-based composites have been widely employed to mitigate global water pollution as this methodology is simple and free from harmful by-products. Notably, alginate and cellulose, which are natural carbohydrate polymers, have gained great attention for their availability, price competitiveness, excellent biodegradability, biocompatibility, hydrophilicity, and superior physicochemical performance in water treatment. This review outlined the recent progress in developing and applying alginate- and cellulose-based hydrogels to remove various pollutants such as dyes, heavy metals, oils, pharmaceutical contaminants, and pesticides from wastewater streams. This review also highlighted the effects of various physical or chemical methods, such as crosslinking, grafting, the addition of fillers, nanoparticle incorporation, and polymer blending, on the physiochemical and adsorption properties of hydrogels. In addition, this review covered the alginate- and cellulose-based hydrogels' current limitations such as low mechanical performance and poor stability, while presenting strategies to improve the drawbacks of the hydrogels. Lastly, we discussed the prospects and future directions of alginate- and cellulose-based hydrogels. We hope this review provides valuable insights into the efficient preparations and applications of hydrogels.