Quartz Crystal Microbalance monitoring the real-time binding of lectin with carbohydrate with high and low molecular mass

Evidence for Conformational Mechanism on the Binding of TgMIC4 with β-Galactose-Containing Carbohydrate Ligand

A deeper understanding of the role of sialic/desialylated groups during TgMIC4-glycoproteins interactions has importance to better clarify the odd process of host cell invasion by members of the apicomplexan phylum. Within this context, we evaluated the interaction established by recombinant TgMIC4 (the whole molecule) with sialylated (bovine fetuin) and desialylated (asialofetuin) glycoproteins by using functionalized quartz crystal microbalance with dissipation monitoring (QCM-D). A suitable receptive surface containing recombinant TgMIC4 for monitoring β-galactose-containing carbohydrate ligand (limit of quantification ∼ 40 μM) was designed and used as biomolecular recognition platform to study the binding and conformational mechanisms of TgMIC4 during the interaction with glycoprotein containing (fetuin), or not, terminal sialic group (asialofetuin). It was inferred that the binding/interaction monitoring depends on the presence/absence of sialic groups in target protein and is possible to be differentiated through a slower binding kinetic step using QCM-D approach (which we are inferring to be thus associated with β-galactose ligand). This slower binding/interaction step is likely supposed (from mechanical energetic analysis obtained in QCM-D measurements) to be involved with Toxoplasma gondii (the causative agent of toxoplasmosis) parasitic invasion accompanied by ligand (galactose) induced binding conformational change (i.e., cell internalization process can be additionally dependent on structural conformational changes, controlled by the absence of sialic groups and to the specific binding with galactose), in addition to TgMIC4-glycoprotein solely recognition binding process.

Biosensor based on lectin and lipid membranes for detection of serum glycoproteins in infected patients with dengue

In this work, we developed a biosystem based on Concanavalin A (ConA) and lipid membranes to recognize glycoproteins from the serum of patients contaminated with dengue serotypes 1, 2 and 3 (DENV1, DENV2 and DENV3). The modified gold electrode was characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and atomic force microscopy. Morphological analyses of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), DPPC-ConA, DPPC-ConA-DENV1, DPPC-ConA-DENV2 and DPPC-ConA-DENV3 revealed the existence of a non-uniform covering and large globules. EIS and CV measurements have shown that redox probe reactions on the modified gold electrodes were partially blocked due to the adsorption of lipid-ConA system and reveal the interaction response of the immobilized ConA to the presence of glycoproteins of dengue serum. The biosystem exhibited a wide linear response to different concentrations of sera of dengue serotypes 1, 2 and 3. A higher impedimetric response to glycoproteins present in dengue serotype 3 was observed. Our results demonstrate the applicability of lectin and lipid membranes to the development of biosensors for dengue infections.

Label-free detection of glycoproteins by the lectin biosensor down to attomolar level using gold nanoparticles

We present here an ultrasensitive electrochemical biosensor based on a lectin biorecognition capable to detect concentrations of glycoproteins down to attomolar (aM) level by investigation of changes in the charge transfer resistance (Rct) using electrochemical impedance spectroscopy (EIS). On polycrystalline gold modified by an aminoalkanethiol linker layer, gold nanoparticles were attached. A Sambucus nigra agglutinin was covalently immobilised on a mixed self-assembled monolayer formed on gold nanoparticles and finally, the biosensor surface was blocked by poly(vinyl alcohol). The lectin biosensor was applied for detection of sialic acid containing glycoproteins fetuin and asialofetuin. Building of a biosensing interface was carefully characterised by a broad range of techniques such as electrochemistry, EIS, atomic force microscopy, scanning electron microscopy and surface plasmon resonance with the best performance of the biosensor achieved by application of HS-(CH2)11-NH2 linker and gold nanoparticles with a diameter of 20 nm. The lectin biosensor responded to an addition of fetuin (8.7% of sialic acid) with sensitivity of (338 ± 11) Ω decade(-1) and to asialofetuin (≤ 0.5% of sialic acid) with sensitivity of (109 ± 10) Ω decade(-1) with a blank experiment with oxidised asialofetuin (without recognisable sialic acid) revealing sensitivity of detection of (79 ± 13) Ω decade(-1). These results suggest the lectin biosensor responded to changes in the glycan amount in a quantitative way with a successful validation by a lectin microarray. Such a biosensor device has a great potential to be employed in early biomedical diagnostics of diseases such as arthritis or cancer, which are connected to aberrant glycosylation of protein biomarkers in biological fluids.

Nanoengineered glycan sensors enabling native glycoprofiling for medicinal applications: towards profiling glycoproteins without labeling or liberation steps

Nanoengineered glycan sensors may help realize the long-held goal of accurate and rapid glycoprotein profiling without labeling or glycan liberation steps. Current methods of profiling oligosaccharides displayed on protein surfaces, such as liquid chromatography, mass spectrometry, capillary electrophoresis, and microarray methods, are limited by sample pretreatment and quantitative accuracy. Microarrayed platforms can be improved with methods that better estimate kinetic parameters rather than simply reporting relative binding information. These quantitative glycan sensors are enabled by an emerging class of nanoengineered materials that differ in their mode of signal transduction from traditional methods. Platforms that respond to mass changes include a quartz crystal microbalance and cantilever sensors. Electronic response can be detected from electrochemical, field effect transistor, and pore impedance sensors. Optical methods include fluorescent frontal affinity chromatography, surface plasmon resonance methods, and fluorescent carbon nanotubes. After a very brief primer on glycobiology and its connection to medicine, these emerging systems are critically reviewed for their potential use as core sensors in future glycoprofiling tools.

Synthesis of poly(lactide-co-glycolide-co-ε-caprolactone)-graft-mannosylated poly(ethylene oxide) copolymers by combination of "clip" and "click" chemistries

Poly(lactide-co-glycolide) (PLGA) is extensively used in pharmaceutical applications, for example, in targeted drug delivery, because of biocompatibility and degradation rate, which is easily tuned by the copolymer composition. Nevertheless, synthesis of sugar-labeled amphiphilic copolymers with a PLGA backbone is quite a challenge because of high sensitivity to hydrolytic degradation. This Article reports on the synthesis of a new amphiphilic copolymer of PLGA grafted by mannosylated poly(ethylene oxide) (PEO). A novel building block, that is, α-methoxy-ω-alkyne PEO-clip-N-hydroxysuccinimide (NHS) ester, was prepared on purpose by photoreaction of a diazirine containing molecular clip. This PEO block was mannosylated by reaction of the NHS ester groups with an aminated sugar, that is, 2-aminoethyl-α-d-mannopyroside. Then, the alkyne ω-end-group of PEO was involved in a copper alkyne- azide coupling (CuAAC) with the pendent azides of the aliphatic copolyester. The targeted mannose-labeled poly(lactide-co-glycolide-co-ε-caprolactone)-graft-poly(ethylene oxide) copolymer was accordingly formed. Copolymerization of d,l-lactide and glycolide with α-chloro-ε-caprolactone, followed by substitution of chlorides by azides provided the azido-functional PLGA backbone. Finally, micelles of the amphiphilic mannosylated graft copolymer were prepared in water, and their interaction with Concanavalin A (ConA), a glyco-receptor protein, was studied by quartz crystal microbalance. This study concluded to the prospect of using this novel bioconjugate in targeted drug delivery.

Jacalin interaction with human immunoglobulin A1 and bovine immunoglobulin G1: affinity constant determined by piezoelectric biosensoring

The affinity of the D-galactose-binding lectin from Artocarpus heterophyllus lectin, known as jacalin, with immonuglobulins (Igs) was determined by biofunctionalization of a piezoelectric transducer. This piezoelectric biofunctionalized transducer was used as a mass-sensitive analytical tool, allowing the real-time binding analysis of jacalin-human immunoglobulin A1 (IgA(1)) and jacalin-bovine IgG(1) interactions from which the apparent affinity constant was calculated. The strategy was centered in immobilizing jacalin on the gold electrode's surface of the piezoelectric crystal resonator using appropriate procedures based on self-assembling of 11-mercaptoundecanoic acid and 2-mercaptoethanol thiol's mixture, a particular immobilization strategy by which it was possible to avoid cross-interaction between the proteins over electrode's surface. The apparent affinity constants obtained between jacalin-human IgA(1) and jacalin-bovine IgG(1) differed by 1 order of magnitude [(8.0 ± 0.9) 10(5) vs (8.3 ± 0.1) 10(6) L mol(-1)]. On the other hand, the difference found between human IgA(1) and human IgA(2) interaction with jacalin, eight times higher for IgA(1), was attributed to the presence of O-linked glycans in the IgA(1) hinge region, which is absent in IgA(2). Specific interaction of jacalin with O-glycans, proved to be present in the human IgA(1) and hypothetically present in bovine IgG(1) structures, is discussed as responsible for the obtained affinity values.

A functional carbohydrate chip platform for analysis of carbohydrate-protein interaction

A carbohydrate chip based on glass or other transparent surfaces has been suggested as a potential tool for high-throughput analysis of carbohydrate-protein interactions. Here we proposed a facile, efficient, and cost-effective method whereby diverse carbohydrate types are modified in a single step and directly immobilized onto a glass surface, with retention of functional orientation. We modified various types of carbohydrates by reductive amination, in which reducing sugar groups were coupled with 4-(2-aminoethyl)aniline, which has di-amine groups at both ends. The modified carbohydrates were covalently attached to an amino-reactive NHS-activated glass surface by formation of stable amide bonds. This proposed method was applied for efficient construction of a carbohydrate microarray to analyze carbohydrate-protein interactions. The carbohydrate chip prepared using our method can be successfully used in diverse biomimetic studies of carbohydrates, including carbohydrate-biomolecule interactions, and carbohydrate sensor chip or microarray development for diagnosis and screening.

Carbohydrate recognition by boronolectins, small molecules, and lectins

Carbohydrates are known to mediate a large number of biological and pathological events. Small and macromolecules capable of carbohydrate recognition have great potentials as research tools, diagnostics, vectors for targeted delivery of therapeutic and imaging agents, and therapeutic agents. However, this potential is far from being realized. One key issue is the difficulty in the development of "binders" capable of specific recognition of carbohydrates of biological relevance. This review discusses systematically the general approaches that are available in developing carbohydrate sensors and "binders/receptors," and their applications. The focus is on discoveries during the last 5 years.