Multisyringe flow injection analysis system for automation of standard addition calibration method

Simple multi-signal calibrations exploiting flow analysis systems

Multi-signal calibrations have been recently exploited in molecular spectrochemical analysis alternatively to traditional calibration methods, improving analytical frequency and accuracy. The application of these strategies is simple and minimizes efficiently matrix effects by analyzing two calibration solutions comprising sample plus standard (S1), and sample plus blank (S2). The plot of the signals obtained with S1 and S2 at multiple settings (e.g. different wavelengths) yield a slope that can be related to the analyte concentration in the sample. Similarly, transient signals could also be related to the analyte concentration exploiting a similar strategy. Thus, in this work, two multi-signal approaches developed in flow-based systems are proposed, based on the responses at multiple wavelengths (online multi-energy calibration, OMEC), and on the dispersion profile of the samples, herein denominated multi-dispersion calibration (MDC). The calibrations were carried out with sample solutions after 2-fold dilution with a standard solution and with water. The feasibility of OMEC and MDC were demonstrated using KMnO4 solutions (without chemical reactions) under continuous and pulsed flow regimes. The applicability of this strategy was also demonstrated by the spectrophotometric determination of urea in milk and pet potty spray in a multi-pumping flow system, based on the color change of bromothymol blue after catalyzed hydrolysis by urease from jack beans (Canavalia ensiformis). MDC and OMEC were compared with external calibrations (EC) and classical standard addition. The limits of detection for urea were estimated at 13 mg L-1, 16 mg L-1, and 10 mg L-1 using MDC, MEC and EC, respectively. Recoveries from 93 to 101%, and the agreement of sample analyzes with the reference procedure demonstrated the good accuracy achieved by the proposed methods. Therefore, it was demonstrated the feasibility of MDC and OMEC for analytical purposes in a simple and efficient way with the advantages of flow-based manifolds.

Iodine speciation in coastal and inland bathing waters and seaweeds extracts using a sequential injection standard addition flow-batch method

The present work describes the development of a sequential injection standard addition method for iodine speciation in bathing waters and seaweeds extracts without prior sample treatment. Iodine speciation was obtained by assessing the iodide and iodate content, the two inorganic forms of iodine in waters. For the determination of iodide, an iodide ion selective electrode (ISE) was used. The indirect determination of iodate was based on the spectrophotometric determination of nitrite (Griess reaction). For the iodate measurement, a mixing chamber was employed (flow batch approach) to explore the inherent efficient mixing, essential for the indirect determination of iodate. The application of the standard addition method enabled detection limits of 0.14 µM for iodide and 0.02 µM for iodate, together with the direct introduction of the target water samples, coastal and inland bathing waters. The results obtained were in agreement with those obtained by ICP-MS and a colorimetric reference procedure. Recovery tests also confirmed the accuracy of the developed method which was effectively applied to bathing waters and seaweed extracts.