Ultrasound assisted-dispersive-ionic liquid-micro-solid phase extraction based on carboxyl-functionalized nanoporous graphene for speciation and determination of trace inorganic and organic mercury species in water and caprine blood samples

Ultrasound assisted magnetic dispersive solid phase microextraction for Hg determination in fuel oils using inductively coupled plasma optical emission spectroscopy

Mercury is considered a global pollutant, and its quantification in fuel oils remains a priority for public health and the ecosystem. Functionalized graphene oxide has gained popularity for heavy metal adsorption in various matrices. Herein we present a highly selective and efficient magnetic graphene oxide coated with gold (Fe3O4/GO-Au) nano adsorbent and its application to a dispersive solid-phase microextraction of mercury in fuel oils. The synthesized Fe3O4/GO-Au nanocomposite was characterized using Fourier Transform Infra-Red spectroscopy (FT-IR), powder X-ray diffraction (P-XRD), Scanning electron microscopy (SEM/EDS), Transmission electron microscopy (TEM), Thermogravimetric (TGA), Brunauer-Emmett-Teller (BET), and vibration sample magnetometer (VSM) analysis. The multivariate optimum conditions for the extraction method were 20 min, 30 mg, pH 7, and 1.75 mol/L, for adsorption time, sorbent mass, pH, and eluent concentration, respectively. Under the optimized conditions, the dynamic linear range of 0.1 to 100 µg/L (R2 = 0.999) was obtained. The limit of detection (LOD) and preconcentration factor obtained were 0.035 µg/L and 255, respectively. Intra- and inter-day precision of the method were calculated to be 3.5% and 4.0%, respectively. The newly developed method was successfully applied in real crude oil, diesel oil, gasoline, and kerosene samples. The environmental impact of the newly developed procedure was evaluated and a total score of 0.64 was obtained.

Optical Chemosensors Synthesis and Appplication for Trace Level Metal Ions Detection in Aqueous Media: A Review

In recent years, the development of optical chemosensors for the sensitive and selective detection of trace level metal ions in aqueous media has garnered significant attention within the scientific community. This review article provides a comprehensive overview of the synthesis strategies and applications of optical chemosensors dedicated to the detection of metal ions at low concentrations in water-based environments. The discussion encompasses a wide range of metal ions, including but not limited to heavy metals, transition metals, and rare earth elements, emphasizing their significance in environmental monitoring, industrial processes, and biological systems. The review explores into the synthesis methodologies employed for designing optical chemosensors, discovering diverse materials like organic dyes, nanoparticles, polymers, and hybrid materials. Special attention is given to the design principles that enable the selective recognition of specific metal ions, highlighting the role of ligand chemistry, coordination interactions, and structural modifications. Furthermore, the article thoroughly surveys the analytical performance of optical chemosensors in terms of sensitivity, selectivity, response time, and detection limits. Real-world applications, including water quality assessment, environmental monitoring, and biomedical diagnostics, are extensively covered to underscore the practical relevance of these sensing platforms. Additionally, the review sheds light on emerging trends, challenges, and future prospects in the field, providing insights into potential advancements and innovations. By synthesizing the current state of knowledge on optical chemosensors for trace level metal ions detection. The collective information presented herein not only offers a comprehensive understanding of the existing technologies but also inspires future research endeavors to address the evolving demands in the realm of trace metal ion detection.

Ultrasound-assisted dispersive solid phase extraction for promoting enrichment of ng L-1 level Hg2+ on ionic liquid coated magnetic materials

Herein, we investigated the enrichment behavior of inorganic mercury (Hg²⁺) on magnetic adsorbent with different ultrasound (US) energy field input. The enrichment rate of 0.10 μg L^-1 mercury is increased by 4.5 times after US instead of stirring as dispersion mode. The input of higher frequency and power ultrasound can accelerate the enrichment of magnetic ionic liquid adsorbent and reduce the Hg²⁺ residue, importantly, which has not been reported. The positive correlation between cavitation effect and acoustic frequency and power in imaging experiments documents that US parameters are the key factors affecting the magnetic solid phase extraction. In addition, in-situ desorption and detection of adsorbate and recovery of adsorbent can be realized by slurry vapor generation (SVG) technology. The recovery of Hg²⁺ in four cycles is more than 90%, which indicates that the structure and properties of the material are not affected by the application of US. Hence, the degradation of adsorption properties caused by agglomeration of magnetic materials can be improved by introducing dispersion methods such as US. At the same time, 95% enrichment efficiency and 0.01-1.0 μg L^-1 linear calibration range corresponding to 150 mL sample documents that magnetic ionic liquid adsorbent combined with US and sensitive spectral detector can meet the needs of ng L^-1 level Hg²⁺ analysis in natural water samples.

Sensitive Mercury Speciation Analysis in Water by High-Performance Liquid Chromatography-Atomic Fluorescence Spectrometry Coupling with Solid-Phase Extraction

An efficient method based on high-performance liquid chromatography coupled with atomic fluorescence spectrometry (HPLC-AFS) was successfully developed for the simultaneous determination of four mercury species including Hg²⁺, methylmercury (MeHg), ethylmercury (EtHg), and phenylmercury (PhHg) in water. Samples were enriched and cleaned up with a solid-phase extraction (SPE) pretreatment using a thiol cartridge. Some key parameters including the selection of a SPE cartridge, eluent type, eluent volume, and interference factors were systematically investigated. Chromatographic separation was achieved on a C₁₈ column using a mobile phase consisting of methanol and 60 mmol L^-1 ammonium acetate with 10 mmol L^-1 L-cysteine by gradient elution. Under the optimized conditions, good linearity (r ≥ 0.9991) was observed between 0.20 to 10.0 μg L^-1. The limits of detection were in the range of 0.001 - 0.002 μg L^-1. High recoveries (87.2 to 111%) and good reproducibility (1.1 - 6.5%) were obtained. Such a method is sensitive, selective and accurate, which can be applied to the quantification of mercury species in water samples.

Nanomaterials in speciation analysis of metals and metalloids

Nanomaterials have draw extensive attention from the scientists in recent years mainly due to their unique and attractive thermal, mechanical and electronic properties, as well as high surface to volume ratio and the possibility for surface functionalization. Whereas mono functional nanomaterials providing a single function, the preparation of core/shell nanoparticles allows different properties to be combined in one material. Their properties have been extensively exploited in different extraction techniques to improve the efficiency of separation and preconcentration, analytical selectivity and method reliability. The aim of this paper is to provide an updated revision of the most important features and application of nanomaterials (metallic, silica, polymeric and carbon-based) for solid phase extraction and microextraction techniques in speciation analysis of some metals and metalloids (As, Cr, Sb, Se). Emphasis will be placed on the presentation of the most representative works published in the last five years (2015-2019).

Formation of functionalized silica-based nanoparticles and their application for extraction and determination of Hg (II) ion in fish samples

An isonicotinic acid hydrazide (INAH) chemically modified fumed silica, as a novel adsorbent, was designed for the preconcentration and determination of Hg (II) ions in fish samples via the solid phase extraction followed by the hydride generation atomic absorption spectrometry (HG-AAS). In this work, the efficiency of the synthesized adsorbent was investigated to determine its ability for the extraction of the Hg (II) ions from the aqueous solutions. The extraction efficiency was investigated by optimizing of different experimental conditions, such as pH, sample volume, flow rate, adsorbent dosage, and eluent type. Under the optimal conditions, a linear calibration curve for the solid phase extraction method was obtained in the range of between 0.12 and 16.5 μg L-1. The obtained detection limit and preconcentration factor were 0.018 μg L-1 and 25, respectively (RSD > 3%). The proposed optimized method was successfully applied to fish samples.

Speciation Analysis of Trace Arsenic, Mercury, Selenium and Antimony in Environmental and Biological Samples Based on Hyphenated Techniques

In order to obtain a well understanding of the toxicity and ecological effects of trace elements in the environment, it is necessary to determine not only the total amount, but also their existing species. Speciation analysis has become increasingly important in making risk assessments of toxic elements since the toxicity and bioavailability strongly depend on their chemical forms. Effective separation of different species in combination with highly sensitive detectors to quantify these particular species is indispensable to meet this requirement. In this paper, we present the recent progresses on the speciation analysis of trace arsenic, mercury, selenium and antimony in environmental and biological samples with an emphasis on the separation and detection techniques, especially the recent applications of high performance liquid chromatography (HPLC) hyphenated to atomic spectrometry or mass spectrometry.

A Green and Efficient Method for the Preconcentration and Determination of Gallic Acid, Bergenin, Quercitrin, and Embelin from Ardisia japonica Using Nononic Surfactant Genapol X-080 as the Extraction Solvent

A simple cloud point preconcentration method was developed and validated for the determination of gallic acid, bergenin, quercitrin, and embelin in Ardisia japonica by high-performance liquid chromatography (HPLC) using ultrasonic assisted micellar extraction. Nonionic surfactant Genapol X-080 was selected as the extraction solvent. The effects of various experimental conditions such as the type and concentration of surfactant and salt, temperature, and solution pH on the extraction of these components were studied to optimize the conditions of Ardisia japonica. The solution was incubated in a thermostatic water bath at 60°C for 10 min, and 35% NaH₂PO₄ (w/v) was added to the solution to promote the phase separation and increase the preconcentration factor. The intraday and interday precision (RSD) were both below 5.0% and the limits of detection (LOD) for the analytes were between 10 and 20 ng·mL^-1. The proposed method provides a simple, efficient, and organic solvent-free method to analyze gallic acid, bergenin, quercitrin, and embelin for the quality control of Ardisia japonica.

Fabrication of magnetic Fe3O4@nSiO2@mSiO2-NH2 core-shell mesoporous nanocomposite and its application for highly efficient ultrasound assisted dispersive µSPE-spectrofluorimetric detection of ofloxacin in urine and plasma samples

In this research, a sensitive, simple and rapid ultrasound assisted dispersive micro solid-phase extraction (USAD-µSPE) was developed using a synthesized core-shell magnetic mesoporous nanocomposite (Fe₃O₄@nSiO₂@mSiO₂-NH₂) as an efficient adsorbent for the preconcentration and spectrofluorometric determination of ofloxacin (OFL) in biological samples. The synthesized adsorbent was characterized using FT-IR spectroscopy, transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), energy dispersive X-ray (EDX) spectroscopy, thermogravimetric analysis (TGA) and Brunauer-Emmett-Teller (BET) analysis. The application of this magnetic nanocomposite as a sensitive solid phase for removal, preconcentration and spectrofluorometric quantification of trace amount of OFL was developed. Influence of various variables including pH, sorbent dosage, desorption solvent properties and sonication time on present method response was studied and optimized. The results showed that using the proposed method OFL can be determined in the linear concentration range of 1.0-500.0µgL^-1 with a limit of detection as low as 0.21µgL^-1 and relative standard deviation less than 2.5 (%). The results of human urine and blood plasma analysis showed that the method is a good candidate for biological sample analysis purposes.

Speciation of mercury in water and fish samples by HPLC-ICP-MS after magnetic solid phase extraction

In this paper, Fe₃O₄@SiO₂@γ-mercaptopropyltrimethoxysilane (γ-MPTS) magnetic nanoparticles was prepared and a new method of magnetic solid phase extraction (MSPE)-high performance liquid chromatography (HPLC)-inductively coupled plasma mass spectrometry (ICP-MS) was developed for the speciation of mercury including inorganic mercury (Hg²⁺), methylmercury (MeHg⁺) and phenylmercury (PhHg⁺) in environmental water, wastewater, tap water and fish samples. A rapid separation of three target mercury species was achieved in 8min by employing relatively high ratio of methanol in HPLC mobile phase. Various parameters affecting Fe₃O₄@SiO₂@γ-MPTS-based MSPE of target mercury species have been investigated. Under the optimized conditions, the limits of detection for Hg²⁺, MeHg⁺ and PhHg⁺ were in the range of 0.49-0.74ngL^-1. The intra- and inter-day relative standard deviations (n=5) were less than 9.0% and 12%, respectively. The developed MSPE-HPLC-ICP-MS method was validated by the speciation of mercury in the Certified Reference Material of DORM-2 dogfish as well as real-world samples including environmental water, wastewater, tap water and fish samples, and it has the advantages of simple operation, rapid separation, high sensitivity, high enrichment factor and is suitable for the analysis of mercury species in samples with complex matrix.