Extraction and preconcentration of organophosphorus pesticides from water samples and fruit juices utilizing hydroxyapatite/Fe3O4 nanocomposite

Dispersive solid-phase microextraction of Cd(II) using CaFe layer double hydroxide with g-C₃N₄ nanocomposite from food and environmental samples

A green and novel composite material integrating graphitic carbon nitride (g-C₃N₄) with layer double hydroxide CaFe-LDH has been developed for detecting Cd(II) ions in food and environmental samples using dispersive solid-phase microextraction (DSPME) method by flame atomic absorption spectroscopy. CaFe-LDH@g-C₃N₄ was synthesized via hydrothermal co-precipitation. The nanocomposite was characterized using various analytical techniques including FTIR, FESEM, XRD and EDX. Optimal conditions were set as pH 8, 15 mg adsorbent, 60 s adsorption time, 30 s desorption time, sample volume 25 mL and eluent volume 2 mL using 0.5 M HNO₃. The method shows low limit of detection (0.04 μg/L), limit of quantification (0.13 μg/L), and preconcentration and enrichment factor 12.5 and 12.32, respectively. It asserts high precision with a relative standard deviation under 10 % and an extraction efficiency of 101.4 %. The accuracy was validated using certified reference materials (CRMs), demonstrating the composite material effectiveness in quantifying Cd(II) concentrations across different matrices.

Fast and efficient extraction and determination of nonsteroidal anti-inflammatory drugs using poly(8-hydroxyquinoline)-coated magnetic graphene oxide nanocomposite prior to capillary electrophoresis analysis in wastewater, breast milk, and urine samples

In this study, magnetic graphene oxide coated with poly(8-hydroxyquinoline) was successfully synthesized, characterized, and utilized as a novel sorbent for the ultrasonic-assisted dispersive magnetic solid-phase extraction of naproxen and ibuprofen. These analytes served as representative analytes for two nonsteroidal anti-inflammatory drugs in various real samples. Characterization techniques, such as IR, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray-mapping, and Brunauer-Emmett-Teller (BET), were used to confirm the correctness synthesis and preparation of the nanocomposites. Effective parameters on the extraction efficiency were investigated to maximize the analytical performance of the developed method. The dynamic range (1-1000 µg L-1), coefficients of determination (R2 ≥ 0.997), the limits of detection (0.3-1.0 µg L-1), and limit of quantification (1.0-3.0 µg L-1), intra-day and inter-day precisions (3.5%-7.2%) were achieved. The method validation results showed extraction recovery ranging from 80.4% to 96.0% and preconcentration factors ranging from 137 to 140.

NiFe-LDH/nylon 6 composite electrospun on polypropylene membrane: A new extractive device development for porous membrane protected micro-solid-phase extraction of organophosphate pesticides from fresh fruit juice samples coupled with liquid chromatography tandem mass analysis

A unique strategy for developing porous membrane protected micro-solid phase extraction has been provided. An electrospun composite was fabricated on the sheet of membrane. To this end, NiFe-layered double hydroxide/Nylon 6 composite nanofibers were coated on a polypropylene membrane sheet followed by folding into a pocket shape, which were then utilized as a novel extractive device to extract of organophosphorus pesticides from fresh fruit juice samples prior to liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The fabricated hybrid composites were successfully characterized. The effective parameters on extraction performance were investigated. LODs were 0.020-0.065 ng mL-1. Excellent linearity (R2≥0.996) was observed between 0.05 and 100.0 ng mL-1. RSDs% were in the range of 3.1-5.8% (intra-day, n = 3) and 2.6-5.5% (inter-day, n = 3×3). Satisfactory related recovery values within the acceptable range of 90.7-111.2% with RSDs% below 6.7% were achieved for the analysis of real samples.

Ultrasonic-induced grafted lanthanum sulfide decorated multi-walled carbon nanotube onto bacterial cellulose applied for adsorption of pesticides in environmental waters

A new biosorbent was fabricated by modification of bacterial cellulose biopolymer grafted with lanthanum sulfide decorated carboxylated multiwall carbon nanotube (La2S3@MWCNT@BC). The sorbent was employed in a green alternative dispersive-solid phase extraction of a variety of 14 pesticides in environmental water samples. The analyses were performed using GC-µECD. The properties and structure of La2S3@MWCNT@BC nanocomposite were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and adsorption-desorption isotherms. The composition of the sorbent was also investigated to evaluate the adsorptive properties of its constituents. The impact of various parameters influencing extraction efficacies such as sorbent dose, adsorption time, sample pH, ionic strength, and desorption conditions was investigated. The method was validated by specificity, matrix effect % (-0.4 to -7.4), enrichment factor (4-10), limits of quantification (0.007-0.31 μg L-1), matrix-matched calibration linearity (0.01-200 µg L-1), determination coefficients (r2=0.9921-0.9998), and precision. The optimized method was applied for the analysis of multiclass pesticides in seven environmental and drinking waters and the recoveries were obtained in the 81-108 % range with RSDs of 2.5-4.7 %. This paper is the first report on the synthesis and use of La2S3@MWCNT@BC nanocomposite to extract pesticides from different water samples. The greenness of the procedure was evaluated by the AGREE protocols.

Green magnetic snail shell hydroxyapatite sorbent for reliable solid-phase extraction of pesticides from water samples

To address sustainability issues, the green synthesis of nanomaterials has recently received considerable attention. This article addresses a novel and cost-effective adsorbent for the extraction of eight phenyl-N-methylcarbamate insecticides from water samples. We first synthesized a magnetite/hydroxyapatite nanocomposite using snail shell powder via an environmental friendly approach. The morphology and physicochemical properties of magnetic hydroxyapatite were characterized by Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. Magnetic extraction parameters were optimized using a Doehlert matrix. Under optimum conditions, the magnetic extraction coupled with a LC-MS method shows good linearity with R2 ≥ 0.9982, suitable intra- and interday precision, and limits of detection and quantification in the range of 0.052-0.093 μg/L and 0.11-0.31 μg/L, respectively. Satisfactory relative recoveries of all carbamates were achieved from fortified water samples in the range of 93.89-101.01%.

Introduction of a new and safe synthesis procedure for Ni-MOF-I in aqueous solution and its application for the extraction of some pesticides from different beverages

For the first time, this research introduces an analytical application of Ni-MOF-I, which was used as an adsorbent in a dispersive micro solid phase extraction procedure followed by dispersive liquid-liquid microextraction for the extraction and preconcentration of seven pesticides from different fruit juices. Also, Ni-MOF-I was synthesized by a new and green method with many advantages over the previously published synthesis procedures. For example, effortless and green synthesis, no need for autoclaves and ovens, and elimination of organic solvent usage are the main highlights. The synthesized Ni-MOF-I was characterized by applying nitrogen adsorption/desorption, energy-dispersive X-ray, scanning electron microscopy, Fourier transform infrared spectrophotometry, and X-ray diffraction analyses. The studied pesticides were extracted and preconcentrated by the proposed method. Then, the extracted analytes in the sedimented organic phase were injected into a gas chromatography-flame ionization detector. Acceptable analytical results such as low limits of detection (0.15-0.60 μg L-1) and quantification (0.50-2.0 μg L-1), reasonable extraction recoveries (51-80%), high enrichment factors (255-400), satisfactory relative standard deviation values of 4.8-7.2% (intra-day precision, n = 6) and 5.3-7.5% (inter-day precision, n = 4), and wide linear ranges were obtained. The proposed method can be introduced as an effective analytical technique based on Ni-MOF-I for the analysis of different pesticides in fruit beverages.

Highly defective copper-based metal-organic frameworks for the efficient adsorption and detection of organophosphorus pesticides: An experimental and computational investigation

Organophosphorus pesticide (OP) residues pose a serious threat to human health, motivating the search for novel adsorbents and detection methods. Herein, defective copper-based metal organic frameworks (Cu-MOFs) were synthesized by the reaction of Cu²⁺ ions and 1,3,5-benzenetricarboxylate linkers in the presence of acetic acid. As the amount of acetic acid increased, the crystallization kinetics and morphology of the Cu-MOFs changed, leading to mesoporous Cu-MOFs with many large surface pores (defects). Adsorption studies of OPs revealed the defective Cu-MOFs showed faster pesticide adsorption kinetics and higher pesticide adsorption capacities. Density functional theory calculations showed that pesticide adsorption in the Cu-MOFs was mainly electrostatic. A dispersive solid phase extraction method was developed based on a defective Cu-MOF-6 for rapidly extracting pesticides from food samples. The method allowed pesticide detection over a wide linear concentration range, low limits of detection (0.0067-0.0164 µg L^-1) and good recoveries in pesticide-spiked samples (81.03-109.55%).

Head-Space SPME for the Analysis of Organophosphorus Insecticides by Novel Silica IL-Based Fibers in Real Samples

This work demonstrates the suitability of a newly developed ionic liquid (IL)-based silica SPME fiber for the determination of seven organophosphorus insecticides in cucumber and grapefruit samples by headspace solid-phase microextraction (HS-SPME) with a gas chromatography−flame ionization detector (FID). The sol-gel method released four different sorbent coatings, which were obtained based on a silica matrix containing ILs immobilized inside its pores. In order to obtain ionogel fibers, the following ionic liquids were utilized: 1-Butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide; Butyltriethyl ammonium bis(trifluoromethylsulfonyl)imide; 1-(2-Methoxyethyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and 1-Benzyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. The developed fibers were applied for the extraction of seven different insecticides from liquid samples. The most important extraction parameters of HS-SPME coupled with the GC-FID method were optimized with a central composite design. The new SPME fiber demonstrated higher selectivity for extracting the analyzed insecticides compared with commercially available fibers. The limit of detection was in the range of 0.01−0.93 μg L−1, the coefficients of determination were >0.9830, and 4.8−10.1% repeatability of the method was found. Finally, the obtained ionogel fibers were utilized to determine insecticides in fresh cucumber and grapefruit juices.

Monodispersed CaCO3@hydroxyapatite/magnetite microspheres for efficient and selective extraction of benzoylurea insecticides in tea beverages samples

A novel monodispersed CaCO₃@hydroxyapatite/magnetite microsphere (CaCO₃ @HAP/Fe₃O₄) was prepared via an in-situ growth strategy, and applied as an adsorbent for efficient and selective adsorption of benzoylurea insecticides (BUs) in various tea beverages samples. The sorbent exhibited uniformity in particle size, good mono-dispersibility and excellent solvent stability. The adsorption equilibrium of BUs (100 ng/mL) in 10 mL of tea beverages samples was achieved on 20 mg of CaCO₃ @HAP/Fe₃O₄ within 10 min. The adsorption followed pseudo-second-order kinetics and Langmuir models and the maximum adsorption capacities of 131.9-161.3 mg/g were accomplished via hydrophobic interactions, hydrogen bonding, and the affinity of F atom and Ca²⁺. Coupled with high performance liquid chromatography, the method offered wide linear ranges of 0.8-1000 ng/mL with correlation coefficients (r) ≥ 0.9995, low limits of detection of 0.2-0.3 ng/mL and large enrichment factors of 75.7-102. The recoveries ranged from 75.7%- 102% with intra- and inter-day precisions of 1.9%- 9.3% and 1.6%- 11.8%, respectively. In addition, CaCO₃ @HAP/Fe₃O₄ could be easily regenerated and reused at least 10 times with no significant loss of recovery. These results revealed an alternative strategy for fast and convenient determination of BUs in tea beverages samples and proved the great feasibility of CaCO₃ @HAP/Fe₃O₄ in the application for the selective adsorption of BUs.

Pesticides in surface freshwater: a critical review

The objective of this study was to critically review studies published up to November 2021 that investigated the presence of pesticides in surface freshwater to answer three questions: (1) in which countries were the studies conducted? (2) which pesticides are most evaluated and detected? and (3) which pesticides have the highest concentrations? Using the Prisma protocol, 146 articles published from 1976 to November 2021 were included in this analysis: 127 studies used grab sampling, 10 used passive sampling, and 9 used both sampling techniques. In the 45-year historical series, the USA, China, and Spain were the countries that conducted the highest number of studies. Atrazine was the most evaluated pesticide (56% of the studies), detected in 43% of the studies using grab sampling, and the most detected in passive sampling studies (68%). The compounds with the highest maximum and mean concentrations in the grab sampling were molinate (211.38 µg/L) and bentazone (53 µg/L), respectively, and in passive sampling, they were oxyfluorfen (16.8 µg/L) and atrazine (4.8 μg/L), respectively. The levels found for atrazine, p,p'-DDD, and heptachlor in Brazil were higher than the regulatory levels for superficial water in the country. The concentrations exceeded the toxicological endpoint for at least 11 pesticides, including atrazine (Daphnia LC₅₀ and fish NOAEC), cypermethrin (algae EC50, Daphnia and fish LC₅₀; fish NOAEC), and chlorpyrifos (Daphnia and fish LC₅₀; fish NOAEC). These results can be used for planning pesticide monitoring programs in surface freshwater, at regional and global levels, and for establishing or updating water quality regulations.

Ionic-liquid-based effervescence-enhanced magnetic solid-phase extraction for organophosphorus pesticide detection in water samples

Herein, an ionic-liquid-based effervescence-enhanced magnetic solid-phase extraction (ILE-MSPE) approach for the extraction/concentration of organophosphorus pesticides in waters is reported with high stability and portability for rapid sample pretreatment in the field. The ionic-liquid-based magnetic effervescent tablet, composed of magnetic nanoparticles (Fe₃O₄), sodium carbonate (Na₂CO₃) as an alkaline source, and an ionic liquid ([C₆MIM][PF₆]), played triple functions: extractant, dispersant, and retrieving agent. Based on the one-factor-at-a-time method, the important variables for the ILE-MSPE approach were optimized as follows: as an extractant, 70 μL of [C₆MIM][PF₆]; molar ratio of alkaline to acidic sources (Na₂CO₃ : H₂C₄H₄O₆) as 1 : 1; and mass of magnetic nanoparticles (MNPs) of 30 mg. By integrating HPLC-DAD detection, the ILE-MSPE approach offered the limits of detection of 0.14-0.22 μg L^-1 and fortified recoveries of 81.4-97.6% for three representative species (methamidophos, phoxim, and parathion) in water samples. The relative standard deviations were lower than 4.9% for both the intra-day and inter-day precision. Overall, the newly developed method is environmentally benign, time-saving, and feasible for outdoor application.

Use of corn straw-derived biochar for magnetic solid-phase microextraction of organophosphorus pesticides from environmental samples

In this study, the potentials of utilizing corn straw-derived biochar in environmental sample pretreatment were examined. An one-step magnetization and carbonization process was developed to prepare magnetic biochar by mixing corn straw powder with Fe²⁺/Fe³⁺ and then pyrolyzed at different temperatures (400-800 °C). The obtained magnetic biochars were characterized by using scanning electron microscopy, Brunauer-Emmett-Teller isotherms, X-ray diffraction and Fourier transform infrared spectroscopy. Various extraction affecting parameters, such as Fe²⁺/Fe³⁺content, pyrolytic temperature, species of desorption solvent, extraction and desorption time, respectively, were studied and optimized. Results showed that the magnetic biochar pyrolyzed at 700 °C exhibited the best extraction performance, with enrichment factors ranging from 52 to 210, presumably due to H-bonding and π-π interactions between biochar and organophosphorus, as well as to the high surface area and pore volume of biochar. The magnetic biochar-based extraction was further combined with gas chromatography-mass spectrometry (GC/MS) to analyze trace organophosphorus pesticides from environmental samples. The method demonstrated good linearity (0.1-50 µg·L^-1), low limits of detection (0.02-0.11 µg·L^-1), and high recoveries (72.4-96.8%) from spiked water and soil samples. The results of this study suggested the promising potentials of utilizing corn straw-derived biochar for efficiently enriching trace organophosphorus pesticides from complex environmental samples.

Magnetic solid-phase extraction of high molecular weight peptides using stearic acid-functionalized magnetic hydroxyapatite nanocomposite: determination of some hypothalamic agents in biological samples

Therapeutic peptides have an important effect on physiological function and human health, so it is momentous to quantify and detect low levels of these biomolecules in biological samples for treatment and diagnostic purposes. In the present study, an efficient magnetic solid-phase extraction (MSPE) method was developed based on stearic acid-functionalized magnetic hydroxyapatite nanocomposite (MHAP/SA) as a novel and cost-effective adsorbent for extraction of five hypothalamic-related peptides (goserelin, octreotide, triptorelin, somatostatin, and cetrorelix) from biological samples. To characterize the morphology and physicochemical properties of MHAP/SA, Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDS), field emission scanning microscopy (FE-SEM), CHNS elemental analysis, Brunauer-Emmett-Teller (BET), and vibrating sample magnetometry (VSM) were applied. Under optimum conditions, the proposed method (MSPE-HPLC-UV) represented favorable linearity with R² ≥ 0.9987, suitable intra- and inter-day precisions (RSD ≤ 6.9% and RSD ≤ 8.1%, respectively, n = 3), and limits of detection and quantification in the range of 0.75-1.12 ng mL^-1 and 2.50-3.75 ng mL^-1, respectively. Eventually, the proposed method was used for the extraction and quantification of target therapeutic peptides in plasma and urine samples, and satisfactory relative recoveries were achieved in the range of 90.6-110.3%.

In situ growth of copper-based metal-organic framework on a helical shape copper wire as a sorbent in stir-bar sorptive extraction of fenthion followed by corona discharge ion mobility spectrometry

In this paper, a helical copper wire, coated with copper-benzene-1,4-dicarboxylic acid metal-organic framework (Cu-BDC) was used as a sorbent for stir-bar sorptive extraction of fenthion from water and fruit samples. The homogenous coating was fabricated through two simple and fast steps. The chemical conversion of copper substrate to copper hydroxide nanotubes (Cu(OH)₂ NTs) was performed in an alkaline solution and then Cu-BDC was formed through a neutralization reaction. Corona discharge ion mobility spectrometry in positive mode was applied for the detection of fenthion. To improve the sensitivity of the method, some synthesis and extraction parameters affecting the extraction efficiency such as benzene-1,4-dicarboxylic acid concentration, ionic strength, sample pH, stirring rate, extraction temperature, and extraction time were investigated. The linear dynamic range between 0.5 and 80 μg L^-1 and detection limit of 0.1 μg L^-1 were obtained under optimal conditions. The intra- and inter-day relative standard deviations were less than 6.4 and 8.6%, respectively. The applicability of the method was examined for the analysis of different samples (i.e., well water, agricultural wastewater, and orange). The recovery for the determination of fenthion in spiked samples varied from 88 to 111%.

Organophosphorus pesticides extraction with polyvinyl alcohol coated magnetic graphene oxide particles and analysis by gas chromatography-mass spectrometry: Application to apple juice and environmental water

In this study, we synthesized, characterized the magnetic graphene oxide coated with polyvinyl alcohol (PVA@MGO), and used it as an adsorbent for the magnetic solid-phase extraction (MSPE) of organophosphorus pesticides (OPPs) residue in the apple juice and environmental water samples followed by gas chromatography-mass spectrometry (GC-MS) analysis. Effective factors on the extraction efficiency, including the adsorbent dosage, desorption conditions, sample pH, extraction and desorption time, and ionic strength were optimized. The dynamic range of the MSPE-GC-MS method was obtained in the concentration range of 0.07-500 ng mL^-1 OPPs with the limits of detection (LODs) in the range of 20-80 pg mL^-1. Also, the intra- and inter-day precisions were determined to be in the range of 3.3-5.7% and 5.9-8.2%. The relative recoveries of pesticides for spiked real water samples and apple juice were in the range of 94.5 and 107.1%, with relative standard deviations between 2.6 and 6.5%. These results propose that the PVA@MGO is appropriate for simultaneous determination and high throughput analysis of OPPs residues.

Polyvinylidene difluoride film with embedded poly(amidoamine) modified graphene oxide for extraction of chlorpyrifos and diazinon

An effective, sensitive, relatively fast, and cost-effective method was developed to determine two types of selected organophosphorus pesticides (OPPs) including diazinon and chlorpyrifos in apple, peach, and four different water samples (river, sea, well, and agriculture wastewater samples) through applying poly(amidoamine)@graphene oxide-reinforced polyvinylidene difluoride thin-film microextraction (PAMAM@GO-PVDF-TFME). The extracted analytes were desorbed via organic solvent and determined using high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The strong interactions between the sorbent and selected analytes (coordination bonds, intermolecular hydrogen bonding, π-π interactions, and hydrophobic effects) made this TFME capable of high extraction performance and capacity. Several factors involved in the PAMAM@GO-PVDF-TFME experiments such as desorption volume, desorption time, sample pH, extraction time, and stirring rate were screened via Plackett-Burman design and then optimized through Box-Behnken design with the purpose of reaching the highest extraction efficiency. The above method showed a good linear range (0.5-500 μg L^-1 and 1-500 μg L^-1) with the coefficient of determination better 0.9944, low limits of determination (0.12 and 0.20 μg L^-1), good enrichment factors (99 and 98), acceptable extraction recoveries (99 and 98%), and good spiking recoveries (90-98%) under the optimized condition at three different spike levels for chlorpyrifos and diazinon, respectively. The results confirmed that the presented method would be promising for the determination of various types of these pesticides in environmental and beverage samples.

Customized dispersive micro-solid-phase extraction device combined with micro-desorption for the simultaneous determination of 39 multiclass pesticides in environmental water samples

A dispersive micro-solid phase extraction (d-µ-SPE) procedure was developed for the simultaneous extraction of 39 multiclass pesticides, containing a variety of chemical groups (organophosphate, organochlorine, pyrethroid, strobilurin, thiocarbamate, triazole, imidazole, and triazine), from water samples. A customized d-µ-SPE glass device was combined with a multi-tube platform vortex and a micro-desorption unit (Whatman Mini-UniPrep G2 syringeless filter), which allowed the unique simultaneous desorption, extract filtration, and injection. A simplex-centroid mixture design and Doehlert design were employed to optimize the extraction conditions. The optimized extraction conditions consisted of an extraction time of 30 min, an addition of 6.74 % of NaCl into 100 mL of water sample, and a desorption time of 24 min with 500 µL of EtAc. The procedure provided a low limit of detection (LOD), ranging from 0.51 ng L^-1 (4,4-DDE) to 22.4 ng L^-1 (dimethoate), and an enrichment factor ranging from 72.5 (dimethoate) to 200 (tebuconazole). The relative recoveries of the pesticides from spiked freshwater and seawater ranged from 74.2 % (endrin) to 123 % (molinate). The proposed procedure was applied to detect the presence of multiclass pesticides in environmental water samples. Three pesticides commonly applied in Brazil, namely, malathion, dimethoate, and lambda-cyhalothrin, were detected in concentrations ranging from <LOD to 120 ng L^-1 (dimethoate).