Synthesis and characterization of PAMAM/SiO2 nanohybrid as a new promising adsorbent for pharmaceuticals

Pharmaceutically active compounds in aqueous environment: recent developments in their fate, occurrence and elimination for efficient water purification

The existence of pharmaceutically active compounds (PhACs) in the water is a major concern for environmentalists due to their deleterious effects on living organisms even at minuscule concentrations. This review focuses on PhACs such as analgesics and anti-inflammatory compounds, which are massively excreted in urine and account for the majority of pharmaceutical pollution. Furthermore, other PhACs such as anti-epileptics, beta-blockers and antibiotics are discussed because they also contribute significantly to pharmaceutical pollution in the aquatic environment. This review is divided into two parts. In the first part, different classes of PhACs and their fate in the wastewater environment are presented. In the second part, recent advances in the removal of PhACs by conventional wastewater treatment plants, including membrane bioreactors (MBRs), activated carbon adsorption and bench-scale studies concerning a broad range of advanced oxidation processes (AOPs) that render practical and appropriate strategies for the complete mineralization and degradation of pharmaceutical drugs, are reviewed. This review indicates that drugs like diclofenac, naproxen, paracetamol and aspirin are removed efficiently by conventional systems. Activated carbon adsorption is suitable for the removal of diclofenac and carbamazepine, whereas AOPs are leading water treatment strategies for the effective removal of reviewed PhACs.

Flexible fabrication chitosan-polyamidoamine aerogels by one-step method for efficient adsorption and separation of anionic dyes

Chitosan in situ grown polyamidoamine (CTS-Gx PAMAM (x = 0, 1, 2, 3)) aerogels were fabricated by a facile one-step freeze-drying method, with glutaraldehyde serving as a crosslinker. The three-dimensional skeletal structure of aerogel provided numerous adsorption sites and accelerated the effective mass transfer of pollutants. The adsorption kinetics and isotherm studies of the two anionic dyes were consistent with the pseudo-second-order and Langmuir models, indicating that the removal of rose bengal (RB) and sunset yellow (SY) was a monolayer chemisorption process. The maximum adsorption capacity of RB and SY reached 370.28 mg/g and 343.31 mg/g, respectively. After five adsorption-desorption cycles, the adsorption capacities of the two anionic dyes reached 81.10% and 84.06% of the initial adsorption capacities, respectively. The major mechanism between the aerogels and dyes was systematically investigated based on using Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy analyses, confirming that electrostatic interaction, hydrogen bonding and van der Waals interactions were the main driving forces for the superior adsorption performance. Furthermore, the CTS-G2 PAMAM aerogel exhibited good filtration and separation performance. Overall, the novel aerogel adsorbent possesses excellent theoretical guidance and practical application potential for the purification of anionic dyes.

Amine-Functionalized Natural Rubber/Mesostructured Silica Nanocomposites for Adsorptive Removal of Clofibric Acid in Aqueous Phase

This study is the first report on the synthesis, characterization and application of amine-functionalized mesoporous nanocomposites based on natural rubber (NR) and wormhole-like mesostructured silica (WMS). In comparison with amine-functionalized WMS (WMS-NH₂), a series of NR/WMS-NH₂ composites were synthesized via an in situ sol-gel method in which the organo-amine group was grafted onto the nanocomposite surface via co-condensation with 3-aminopropyltrimethoxysilane (APS) as the amine-functional group precursor. The NR/WMS-NH₂ materials had a high specific surface area (115-492 m² g^-1) and total pore volume (0.14-1.34 cm³ g^-1) with uniform wormhole-like mesoporous frameworks. The amine concentration of NR/WMS-NH₂ (0.43-1.84 mmol g^-1) was increased with an increase in the APS concentration, corresponding to high levels of functionalization with the amine groups of 53-84%. The H₂O adsorption-desorption measurement revealed that NR/WMS-NH₂ possessed higher hydrophobicity than WMS-NH₂. The removal of clofibric acid (CFA), a xenobiotic metabolite of the lipid-lowering drug clofibrate, from the aqueous solution using WMS-NH₂ and NR/WMS-NH₂ materials was investigated using a batch adsorption experiment. The adsorption was a chemical process in which the pseudo-second order kinetic model expressed the sorption kinetic data better than the pseudo first-order and Ritchie-second kinetic order model. In addition, the CFA adsorption sorption equilibrium data of the NR/WMS-NH₂ materials were fitted to the Langmuir isotherm model. The NR/WMS-NH₂ with 5% amine loading had the highest CFA adsorption capacity (6.29 mg g^-1).

Dendrimer-based magneto-plasmonic nanosorbents for water quality monitoring using surface-enhanced Raman spectroscopy

In this work, we report the synthesis of magneto-plasmonic dendrimer-based nanosorbents containing Au nanostars and we demonstrate that they can be used as versatile optical sensors for the detection of pesticides in spiked water samples. The magnetic hybrid nanoparticles were obtained by conjugating silica-functionalized G5-NH₂ PAMAM dendrimers to silica-coated magnetite cores. The resulting magnetic-PAMAM conjugates were then used to reduce and sequester Au seeds for the subsequent in situ growth of Au nanostars. The dendrimer-based magneto-plasmonic substrates containing the Au anisotropic nanophases were then investigated regarding their ability to monitor water quality through surface-enhanced Raman scattering (SERS) spectroscopy. As a proof-of-concept, the ensuing multifunctional materials were investigated as SERS probing systems to detect dithiocarbamate pesticides (ziram and thiram) dissolved in water samples. It was observed that the magneto-plasmonic hybrid materials enhance the Raman signal of these pesticides under variable operational conditions, suggesting the versatility of these systems for water quality monitoring. Moreover, a detailed analysis of the SERS data was accomplished to predict the adsorption profile of the dithiocarbamate pesticides to the Au surface.

An overview of poly (amide-amine) dendrimers functionalized chromatographic separation materials

Chromatography is one of the most important separation techniques in analytical chemistry. In which, the separation materials are the core for good separation results. Poly (amide-amine) dendrimers with regular three-dimensional structure, abundant terminal groups, controllable molecule chains, and unique cavities appear to have a positive impact on chromatographic separation materials. In the past decades, poly (amide-amine) grafted adsorbents and stationary phases have presented high grafting efficiency, controllable surface structure, good dispersion, and wide practical applications. In this review, the prepared poly (amide-amine) functionalized separation materials and their applications are systematically summarized. Functions, significance, structure-actvity relationships and benefits of poly (amide-amine) dendrimers in the proposed separation materials are discussed in detail. And we hope to provide a useful reference for the future development of chromatographic separation materials and inspire new discoveries in the study of poly (amide-amine) functionalized materials.

A new alternative of a green polymeric matrix chitosan/alginate-polyethyleniminemethylene phosphonic acid for pharmaceutical residues adsorption

A new generation of a green polymeric matrix, chitosan/alginate-polyethyleniminemethylene phosphonic acid (CHIT/ALG-PEIMPA) was examined in comparative study of adsorption and preconcentration of non-steroidal anti-inflammatory drugs (NSAIDs), diclofenac and ibuprofen. The influences of experimental parameters like pH, time reaction, initial concentration, ionic strength were investigated. The scanning electron microscopy (SEM) images showed heterogeneous morphology with different particle sizes of agglomerates from few micrometers to a hundred micrometers and irregular particles shape, before pharmaceuticals products adsorption. However, after adsorption, SEM micrograph reveals a smooth surface structure of agglomerate, and even in this smaller magnification, it was possible to observe the formation of homogenous and regular surface of CHIT/ALG-PEIMPA. Elementary analysis (EDX) reveals that the phosphonic acid (PEIMPA) was successfully cross-linked onto chitosan/alginate. The maximal adsorption capacity was found to be 222 mg.g^-1, and 122 mg.g^-1 under optimum conditions for diclofenac and ibuprofen respectively. The kinetic modeling followed the pseudo-second-order rate expression for both pharmaceutical drugs. Thermodynamics data leads to an exothermic and spontaneous adsorption processes (∆H = -34.32 KJ mol^-1; ∆H =-21.59 KJ mol^-1), respectively for diclofenac and ibuprofen.

Optimization of ketoprofen adsorption from aqueous solutions and simulated effluents using H2SO4 activated Campomanesia guazumifolia bark

This study used the bark of the forest species Campomanesia guazumifolia modified with H₂SO₄ to absorb the anti-inflammatory ketoprofen from aqueous solutions. FTIR spectra confirmed that the main bands remained after the chemical treatment, with the appearance of two new bands related to the elongation of the carbonyl group present in hemicellulose. Micrographs confirmed that the surface started to contain a new textural shape after acid activation, having new pores and cavities. The drug adsorption's optimum conditions were obtained by response surface methodology (RSM). The adsorption was favored at acidic pH (2). The dosage of 1 g L^-1 was considered ideal, obtaining good indications of removal and capacity. The Elovich model very well represented the kinetic curves. The isotherm studies indicated that the increase in temperature negatively affected the adsorption of ketoprofen. A maximum adsorption capacity of 158.3 mg g^-1 was obtained at the lower temperature of 298 K. Langmuir was the best-fit isotherm. Thermodynamic parameters confirmed the exothermic nature of the system (ΔH⁰ = -8.78 kJ mol^-1). In treating a simulated effluent containing different drugs and salts, the removal values were 35, 50, and 80% at 15, 30, and 180 min, respectively. Therefore, the development of adsorbent from the bark of Campomanesia guazumifolia treated with H₂SO₄ represents a remarkable alternative for use in effluent treatment containing ketoprofen.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

Design of PAMAM grafted chitosan dendrimers biosorbent for removal of anionic dyes: Adsorption isotherms, kinetics and thermodynamics studies

PAMAM grafted chitosan as biocompatible adsorbent was synthesized through Michael addition of methyl acrylate followed by amidation of ethylenediamine on the chitosan backbone. Then, the adsorption capacity of bioadsorbents were assessed by employing two anionic dyes. The adsorption experiments were carried out using a batch adsorption system. The influence of various operational variables such as different PAMAM generations, pH, adsorbent dosage, contact time, initial dye concentration and temperature on the maximum adsorption capacity (q_m) were investigated. The adsorbent consists of second generation of PAMAM (CS-PAMAM G2) demonstrated high removal efficiency for both dyes. The maximum adsorption capacity of CS-PAMAM G2 for Congo Red at certain operational conditions was 559.3 mg/g; while the maximum adsorption capacity for Amido Black 10B at certain operational conditions was 489.8 mg/g; which revealed endothermic and exothermic nature of adsorption process for Congo Red and Amido Black 10B, respectively. These results were then well confirmed by thermodynamics studies. Also, kinetic studies showed that the dye adsorption process followed a pseudo-second-order kinetic model. Moreover, among various applied isotherms, the experimental data were well-fitted by Sips model. Consequently, CS-PAMAM G2 showed superior potential for the removal of dyes from aqueous phase.

Dendrimer-Functionalized Hybrid Materials Based on Silica as Novel Carriers of Bioactive Acids

One of the major goals in the materials science is the design and development of non-toxic, versatile, and efficient drug delivery systems. The study reported in this paper concerns the syntheses of poly(amidoamine) (PAMAM) dendrimers with tris(2-aminoethyl)amine as an amine core and different terminal amines, and their attachment to silica matrix. The obtained ethylenediamine (EDA), triethylenetetramine (TETA), tris(2-aminoethyl)amine (TREN) and 4,7,10-trioxa-1,13-tridecanediamine (TRI-OXA) dendrimers were introduced to the support surface via an epoxy linker, leading to a loading efficiency in the range of 0.054–0.113 mmol g⁻¹, determined using elemental and thermogravimetric analyses. The materials exhibited high adsorption capacities towards the chosen model drugs: folic, salicylic and nicotinic acid. The investigated adsorption processes were found to follow the Freundlich isotherm model, with indication of the drugs’ structure influence on the binding efficiency. Drug-loaded hybrid materials were also described for in vitro drug release in three pH-different paraphysiological media. The highest percentage release was obtained in the tests performed at pH 2.0, ranging between 35.42 and 99.83%. Satisfactory results and the versatility of PAMAM dendrimers may lead to the application of such materials not only as drug carriers dedicated to a wide range of pharmaceutics, but also as analytical tools for pre-concentration and/or the determination of biocompound contamination in samples.