Reference values of methyl mercury mass fractions in new type of environmental matrix-matching materials for speciation analysis assigned by species-specific isotope dilution inductively coupled plasma mass spectrometry and high-performance liquid chromatography

A novel simultaneous isotope dilution strategy as a powerful tool in the two-track certification process of trace metal mass fractions: a case study of mercury, cadmium and lead in soil and sediment materials

An analytical methodology based on isotope dilution (ID) principles was developed to establish the reference procedure for the simultaneous assignation of aqua regia extractable and total mass fractions of Hg, Cd, and Pb in soil and sediment matrix samples. The 'twin sample-spike blends' were prepared under close to the exact matching conditions, resulting in almost identical mass ratios of the spike to the sample in the blends, which followed either the aqua regia extraction method or total digestion procedure. The isotope ratios in 'twin-blends' were measured by inductively coupled plasma mass spectrometry (ICP-MS). The two-track IDMS strategy proposed in this work was successfully applied to three certified reference materials (CRMs): ERM-CC141 loam soil, EnvCRM 03 soil, and MODAS-2 bottom sediment. This ensured an adequate method validation. For two CRMs (EnvCRM 03 and MODAS-2) it was found that the isotope ratio values in 'twin-blends' for Hg, Cd, and Pb were almost identical with a variability of less than 2.4%. This confirmed that there is no measurable difference between the aqua regia extractable and the total mass fractions within the uncertainty ranges. Therefore, aqua regia mass fractions assigned in this study were found to be equal to certified element contents. For ERM-CC141 loam soil, the Hg isotope ratio values measured in the 'twin-blends' were found to be identical within their measurement uncertainties, and thus, it was concluded that the aqua regia extractable Hg content is identical to the total Hg content. However, in the case of Cd and Pb isotope ratio values in 'twin-blends' varied around 24% or 16%, respectively and because this significant difference was noticed, for both elements it is necessary to calculate the aqua regia content and the total content separately. Because this significant difference was noticed for both elements, it is necessary to calculate the aqua regia content and the total content separately. A detailed comparison of the isotope ratio values between the 'twin-blends' provided unambiguous information about aqua regia extractability of metals and it is a strong indicator for making decisions related to the assignment of either a single mass fraction valid for both procedures or two separate element mass fraction values. To our knowledge and based on the relevant literature survey, this is a novel strategy based on IDMS, and such studies have not been undertaken and presented so far.

Assignation of inorganic mercury and methylmercury mass fractions in a soil matrix certified reference material by two analytical methodologies based on species-specific isotope dilution mass spectrometry and chromatographic separation

Assignment of inorganic mercury and methyl mercury mass fractions at an ultra-trace level in soil certified reference material EnvCRM 03 with a complex matrix composition was undertaken. Inorganic mercury and methyl mercury contents by species-specific isotope dilution inductively coupled plasma MS with on-line HPLC or with classical off-line chromatography were established. Different extraction protocols: sequential extraction ((1) H₂ SO₄ /KBr/CuSO₄ ; (2) dichloromethane; (3) Na₂ S₂ O₃ ) or one-step extraction (diluted HCl) in solid-liquid systems were verified. Sequential extraction allowed quantification and separation of inorganic mercury and methyl mercury on HPLC column in one chromatographic run and were found to be (316 ± 10) μg kg^-1 (U = 3.2%, k = 2) and (0.53 ± 0.02) μg kg^-1 (U = 3.8%, k = 2), respectively. Extraction by diluted HCl and application of classical off-line chromatography led to the separation of methyl mercury from predominant inorganic mercury form and was found to be (0.54 ± 0.03) μg kg^-1 (U = 5.4%, k = 2). To the best-obtained literature knowledge, there was no available soil material aimed for speciation analysis of inorganic mercury and methyl mercury so far. Both developed analytical methodologies were found to be equally sensitive and could be successfully applied for mercury species determination in samples with the complex matrix. This article is protected by copyright. All rights reserved.

Interference-free, green microanalytical method for total mercury and methylmercury determination in biological and environmental samples using small-sized electrothermal vaporization capacitively coupled plasma microtorch optical emission spectrometry

An analytical method for the quantification of total Hg and CH₃Hg⁺ in biological tissues (fish, mushroom) and water sediment was developed based on small-sized electrothermal vaporization capacitively coupled plasma microtorch optical emission spectrometry using a low-resolution microspectrometer as detector. Sample preparation was carried out according to the procedure recommended by JRC Technical Report of European Commission for the determination of CH₃Hg⁺ in seafood and adapted by us for lower consumption of reagents. Amounts of 0.1 - 0.5 g sample were subjected to extraction in 5 ml of 47% HBr then CH₃Hg⁺ was extracted in 2 × 1 ml toluene and back-extracted in 2 ml aqueous solution of 1% l-cysteine. Total Hg/CH₃Hg⁺ were quantified in 10 μl of acidic extract/l-cysteine solution after electrothermal vaporization and measurement of 253.652 nm Hg signal in the episodic emission spectra. Under the optimal working conditions of system (70 °C sample drying, 1300 °C sample vaporization, 10 W plasma power and 150 ml min^-1 Ar flow) the limits of detection were 7.0 μg kg^-1 total Hg and 3.5 μg kg^-1 CH₃Hg⁺. Comparison of slopes in external calibration and standard addition procedure revealed the lack of non-spectral interferences of multimineral matrix, so that the calibration against Hg²⁺ standards was adopted. Pooled recovery of total mercury/methylmercury was 101 ± 7%/100 ± 7%, while precision assessed from measurements of real samples was in the range 1.6-9.6%/2.7-12.8%. The proposed method validated according to Eurachem Guide 2014 is selective and complies with demands in European legislation (Decisions 657/2002; 333/2007; 836/2011) and Association of Official Analytical Chemists Guide in terms of performances for food control. The method displays a high degree of greenness by circumventing cold vapor generation, use of small amounts of reagents and full-miniaturized instrumentation resulting in low analytical costs without reducing results quality. Besides, the method is simple and rapid, since it uses external calibration curves prepared from Hg²⁺standard solutions both for total Hg and CH₃Hg⁺ determination.