Voltammetric sensing of dinitrophenolic herbicide dinoterb on cathodically pretreated boron-doped diamond electrode in the presence of cationic surfactant

The cathodically pretreated boron-doped diamond electrode as an environmentally friendly electrochemical tool for the detection and monitoring of mesotrione in food samples

Excessive pesticide use can harm human health, making it essential to develop new techniques to monitor hazardous pesticides in food. Our study focuses on detecting mesotrione (MST) using an unmodified boron-doped diamond (BDD) electrode. This was the first application of cathodically pretreated BDD electrode for the detection of MST, based on its oxidation at a high potential value of +1.4 V. We theoretically examined the oxidation mechanism of MST trough the utilization of density functional theory (DFT) methodology. The utilized DPV method achieved a detection limit of 0.45 μM and showed satisfactory selectivity. The practical application of this method was demonstrated by examining corn-based food products. To ensure practical application of the method, MST was deliberately added to the samples to evaluate the accuracy of the proposed method. The effectiveness of the method was confirmed by using HPLC method. This environmentally-friendly approach can establish a solid foundation for future use in food analysis.

Electrocatalysis of 2,6-Dinitrophenol Based on Wet-Chemically Synthesized PbO-ZnO Microstructures

In this approach, a reliable 2,6-dinitrophenol (2,6-DNP) sensor probe was developed by applying differential pulse voltammetry (DPV) using a glassy carbon electrode (GCE) decorated with a wet-chemically prepared PbO-doped ZnO microstructures’ (MSs) electro-catalyst. The nanomaterial characterizing tools such as FESEM, XPS, XRD, UV-vis., and FTIR were used for the synthesized PbO-doped ZnO MSs to evaluate in detail of their optical, structural, morphological, functional, and elemental properties. The peak currents obtained in DPV analysis of 2,6-DNP using PbO-doped ZnO MSs/GCE were plotted against the applied potential to result the calibration of 2,6-DNP sensor expressed by ip(µA) = 1.0171C(µM) + 22.312 (R2 = 0.9951; regression co-efficient). The sensitivity of the proposed 2,6-DNP sensor probe obtained from the slope of the calibration curve as well as dynamic range for 2,6-DNP detection were found as 32.1867 µAµM−1cm−2 and 3.23~16.67 µM, respectively. Besides this, the lower limit of 2,6-DNP detection was calculated by using signal/noise (S/N = 3) ratio and found as good lowest limit (2.95 ± 0.15 µM). As known from the perspective of environment and healthcare sectors, the existence of phenol and their derivatives are significantly carcinogenic and harmful which released from various industrial sources. Therefore, it is urgently required to detect by electrochemical method with doped nanostructure materials. The reproducibility as well as stability of the working electrode duration, response-time, and the analysis of real environmental-samples by applying the recovery method were measured, and found outstanding results in this investigation. A new electrochemical research approach is familiarized to the development of chemical sensor probe by using nanostructured materials as an electron sensing substrate for the environmental safety (ecological system).

First electrochemical evaluation of favipiravir used as an antiviral option in the treatment of COVID-19: A study of its enhanced voltammetric determination in cationic surfactant media using a boron-doped diamond electrode

Favipiravir, a promising antiviral agent, is undergoing clinical trials for the potential treatment of the novel coronavirus disease 2019 (COVID-19). This is the first report for the electrochemical activity of favipiravir and its electroanalytical sensing. For this purpose, the effect of cationic surfactant, CTAB was demonstrated on the enhanced accumulation of favipiravir at the surface of cathodically pretreated boron-doped diamond (CPT-BDD) electrode. At first, the electrochemical properties of favipiravir were investigated in the surfactant-free solutions by the means of cyclic voltammetry. The compound presented a single oxidation step which is irreversible and adsorption controlled. A systematic study of various operational conditions, such as electrode pretreatment, pH of the supporting electrolyte, concentration of CTAB, accumulation variables, and instrumental parameters on the adsorptive stripping response, was examined using square-wave voltammetry. An oxidation signal at around +1.21 V in Britton-Robinson buffer at pH 8.0 containing 6 × 10^-4 M CTAB allowed to the adsorptive stripping voltammetric determination of favipiravir (after 60 s accumulation step at open-circuit condition). The process could be used in the concentration range with two linear segments of 0.01-0.1 μg mL^-1 (6.4 × 10^-8-6.4 × 10^-7 M) and 0.1-20.0 μg mL^-1 (6.4 × 10^-7-1.3 × 10^-4 M). The limit of detection values were found to be 0.0028 μg mL^-1 (1.8 × 10^-8 M), and 0.023 μg mL^-1 (1.5 × 10^-7 M) for the first and second segments of calibration graph, respectively. The feasibility of developed methodology was tested to the analysis of the commercial tablet formulations and model human urine samples.

Cloud-point extraction associated with voltammetry: preconcentration and elimination of the sample matrix for trace determination of methyl parathion in honey

This work presents the association of cloud point extraction (CPE) and electroanalysis for the selective and sensitive determination of methyl parathion (MP) in honey. The CPE step provided the pre-concentration of MP from a complex sample, in which the optimized extraction parameters (Triton X-100 concentration of 0.75% w/v, NaCl concentration of 1.0% w/v and heating time of 30 min) were investigated using a factorial design (23). The detection of MP was performed using a cathodically pre-treated boron-doped diamond (BDD) working electrode and square wave voltammetry (SWV), after a suitable dilution of the CPE extract in Britton-Robinson buffer pH 6.0 as the supporting electrolyte. MP presented three electrochemical processes over the BDD surface, but only the reduction peak at around -0.7 V was monitored for the MP determination (higher detectability). Improved reproducibility was reached by applying an in situ cleaning step (+2.0 V for 15 s) followed by a re-activation process (-2.0 V for 15 s) between measurements. Using the optimized variables, a linear range between 0.1 and 2.0 μmol L-1 was obtained for MP with a limit of detection of 0.006 μmol L-1, a 6-fold lower value when compared with the value attained without the CPE step. The experimental enrichment factor of MP was 6.1. Also, the optimized CPE allowed the determination of MP in honey samples with good accuracy (recovery between 94 and 106%), which was not possible using direct detection (without CPE) due to the matrix interference. This is the first paper that demonstrates the combination of CPE and electroanalysis for the determination of an organic compound.

A new voltammetric platform for reliable determination of the sport performance-enhancing stimulant synephrine in dietary supplements using a boron-doped diamond electrode

For the first time, we propose a new modification-free voltammetric platform for simple, fast and reliable quantification of the sport performance-enhancing stimulant synephrine (SYN) based on the usage of a commercial screen-printed boron-doped diamond (BDD) electrochemical sensor. Applying cyclic voltammetry, SYN exhibited one well-shaped, irreversible and diffusion-driven oxidation peak at a peak potential of +1.45 V (vs. the silver pseudoreference electrode) in the presence of 2 M HClO₄. Under the selected experimental conditions, the following analytical parameters for determination of SYN were obtained: linear concentration ranges from 19.6 up to 1000 μM and from 9.9 up to 1000 μM for differential pulse (DPV) and square-wave voltammetry (SWV), respectively, detection limits at micromolar concentration levels and intra-day repeatability with a relative standard deviation below 4% for both pulse techniques. The interference study revealed fair selectivity when considering the target dietary supplements. The feasibility of the developed voltammetric platform was verified in the analysis of commercially available dietary supplements and reasonable recovery values were achieved by DPV and SWV, respectively. In addition, the method can be performed directly without higher consumption of chemicals, waste generation, complex sample extraction and higher instrumentation cost. The advanced BDD electrochemical sensor has appeared to be a suitable competitor for efficient applications in food quality control analysis.