Dummy molecularly imprinted polymer (DMIP) as a sorbent for bisphenol S and bisphenol F extraction from food samples

Current trends of functional monomers and cross linkers used to produce molecularly imprinted polymers for food analysis

Molecularly imprinted polymers (MIPs) as artificial synthetic receptors are in high demand for food analysis due to their inherent molecular recognition abilities. It is common practice to employ functional monomers with basic or acidic groups that can interact with analyte molecules via hydrogen bonds, covalent bonds, and other interactions (π-π, dipole-ion, hydrophobic, and Van der Waals). Therefore, selecting the appropriate functional monomer and cross-linker is crucial for determining how precisely they interact with the template and developing the polymeric network's three-dimensional structure. This study summarizes the advancements made in MIP's functional monomers and cross-linkers for food analysis from 2018 to 2023. The subsequent computational design of MIP has been thoroughly explained. The discussion has concluded with a look at the difficulties and prospects for MIP in food analysis.

Large-size porous spherical 3D covalent organic framework for preconcentration of bisphenol F in water samples and orange juice

Large-size spherical sorbents with particle size of 10-50 μm are widely applied in separation fields, however it is still a great challenge to synthesize such large-size spherical covalent organic framework (COF). In this work, a type of large-size porous 3D COF was size-controablly synthesized via a two-step strategy, in which a large-size porous 3D spherical polymer was prepared first through a Pickering emulsion polymerization using nano silica as the stabilizer, and subsequently it was converted into porous spherical 3D COF by a solvothermal method. The as-prepared porous spherical COF (COF-320 as a model) showed size-controllable uniform spherical morphology within 15-45 μm, large specific surface area, fine crystalline structure, and good chemical stability. When used as the sorbent for dispersive solid-phase extraction (d-SPE) of bisphenol F (BPF), the porous spherical COF-320 (15 μm) displayed high adsorption capacity (Qmax = 335.6 mg/g), high enrichment factor (80 folds), and good reusability (at least five cycles). By coupling the d-SPE method to HPLC, a new analytical approach was developed and successfully applied to the determination of trace BPF in two water samples, an orange juice and a standard sample with recoveries of 96.0-102.2 % (RSD = 1.1-1.5 %), 95.7-97.4 % (RSD = 1.4-4.4 %) and 98.7 % (RSD = 2.3 %), respectively. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were 0.1 and 0.3 ng/mL, respectively. The new synthesis strategy opens a viable way to prepare large-size porous spherical COFs, and the developed analytical method can be potentially applied to sensitively detect the trace BPF in water samples and beverages.

Magnetic molecular imprinted covalent organic framework composite for the magnetic solid-phase extraction of bisphenol AF

A magnetic molecular imprinted covalent organic framework composite (MCOF-MIP) that possessed the 'dual-selectivity' of a covalent organic framework and molecular imprinted polymer (MIP) with rapid response performance was successfully prepared for the removal of bisphenol AF (BPAF) from real water and blood samples. First, the MCOF was separately synthesized using magnetic Fe3O4 as the magnetic core, 1,3,5-triaminobenzene and 2,5-dibromobenzene-1,4-diformaldehyde as precursors and a deep eutectic solvent (DES) as the solvent using a solvothermal synthesis method. The MCOF showed high crystallinity and good adsorption capacities for BPAF (107.4 mg g-1), bisphenol A (113.6 mg g-1), bisphenol S (120.0 mg g-1) and bisphenol F (82.1 mg g-1). To further improve the selectivity for BPAF, an MIP, which uses BPAF as a template, was introduced to form the MCOF-MIP. Due to the dual selectivity of MCOF and MIP, the MCOF-MIP exhibited relatively high selective adsorption capacity to BPAF (243.1 mg g-1) compared to that for the MCOF (107.4 mg g-1), while the adsorption capacities (149.7-109.4 mg g-1) for the other three compounds were not significantly improved. Furthermore, a magnetic solid-phase extraction (MSPE) method was established, and MSPE parameters such as adsorbent dosage, adsorption time, desorption solvent and desorption time were optimized. Combined with high-performance liquid chromatography with diode-array detection (HPLC-DAD) analysis, a rapid and sensitive method was developed to detect BPAF, which showed good linearity (r > 0.9969) ranging from 0.1 to 400 μg mL-1. Low limits of detection (0.04 μg mL-1, S/N = 3) and quantitation (0.1 μg mL-1, S/N = 10) and good precision with low relative SDs (<1.2 % for intra-day and <1.1 % for inter-day) were also obtained. Finally, MSPE coupled with HPLC-DAD was employed for the analysis of BPAF in water and blood samples, and the recoveries of BPAF were satisfactory (91.1-112.6 %).

Development of a specific and sensitive method for the detection of glyphosate pesticide and its metabolite in tea using dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography-tandem quadrupole mass spectrometry

Glyphosate, a widely used herbicide, and its primary metabolite aminomethyl phosphonic acid have been found to cause environmental and ecological issues and threaten human health. The conventional pretreatment method was insufficient for the extraction, concentration, and enrichment of trace substances, resulting in poor specificity. Thus, our objective was to develop a method for glyphosate pesticide detection using dummy molecularly imprinted solid-phase extraction (DMI-SPE) combined with liquid chromatography-tandem quadrupole mass spectrometry (DMI-SPE-LC/MS/MS). The sol-gel method was used to prepare the molecularly imprinted material, using glyphosine as the dummy template molecule, to achieve specific adsorption to glyphosate and reduce costs. The optimized polymerization conditions achieved maximum adsorption of 28.6 µg/mg glyphosate by the molecularly imprinted material. The established DMI-SPE-LC/MS/MS method was used to detect glyphosate and its metabolite (aminomethyl)phosphonic acid in tea. The concentration ranges of glyphosate and (aminomethyl)phosphonic acid (from 0.05 to 4 µg/mL) were linear with correlation coefficients of 0.999 and 0.991, respectively. The recoveries of (aminomethyl)phosphonic acid at three spiked levels ranged from 79.95% to 83.74%, with RSDs between 6.40% and 7.45%, while the recoveries of glyphosate ranged from 98.69% to 106.26%, with RSDs between 0.91% and 1.18%. Our results demonstrate that the developed DMI-SPE-LC/MS/MS method achieves high sensitivity and specific detection of glyphosate and its metabolite (aminomethyl)phosphonic acid in tea matrices.

Simultaneous Quantification of 16 Bisphenol Analogues in Food Matrices

Exposure to bisphenol analogues can occur in several ways throughout the food production chain, with their presence at higher concentrations representing a risk to human health. This study aimed to develop effective analytical methods to simultaneously quantify BPA and fifteen bisphenol analogues (i.e., bisphenol AF, bisphenol AP, bisphenol B, bisphenol BP, bisphenol C, bisphenol E, bisphenol F, bisphenol G, bisphenol M, bisphenol P, bisphenol PH, bisphenol S, bisphenol Z, bisphenol TMC, and tetramethyl bisphenol F) present in canned foods and beverages. Samples of foods and beverages available in the Swiss and EU markets (n = 22), including canned pineapples, ravioli, and beer, were prepared and analyzed using QuEChERS GC-MS. The quantification method was compared to a QuEChERS LC-MS/MS analysis. This allowed for the selective and efficient simultaneous quantitative analysis of bisphenol analogues. Quantities of these analogues were present in 20 of the 22 samples tested, with the most frequent analytes at higher concentrations: BPA and BPS were discovered in 78% and 48% of cases, respectively. The study demonstrates the robustness of QuEChERS GC-MS for determining low quantities of bisphenol analogues in canned foods. However, further studies are necessary to achieve full knowledge of the extent of bisphenol contamination in the food production chain and its associated toxicity.

Solvent-assisted dispersive micro-solid phase extraction of bisphenols using iron(III) thenoyltrifluoroacetonate complex (Fe(TTA)3) as a new nanostructured sorbent: a proof of concept

In this work, we describe for the first time the use of iron(III) thenoyltrifluoroacetonate complex (Fe(TTA)₃) as a novel sorbent for solvent-assisted dispersive micro-solid phase extraction (SA-dμSPE) of bisphenols from water samples. The extraction procedure is based on the formation of nanoparticles in situ following the rapid injection of a methanolic solution of Fe(TTA)₃ into the stirred aqueous sample. Herein, the synthesis of Fe(TTA)₃ and study of the essential parameters of the preparative procedure are described. The optimized procedure allowed for efficient enrichment of bisphenols from various water samples, chosen as model contaminants and matrix, within 2.5 min. The sorbent was collected by centrifugation, dissolved in methanol, and injected to perform HPLC with spectrophotometric detection. The limits of detection and quantification obtained ranged from 1.0-3.1 and 3.1-7.5 μg L^-1, respectively. Intraday and interday precisions of <7% relative standard deviation (RSD) and <8% RSD with analyte recoveries ranging between 70-117% (103.8% on average) were obtained for the analysis of river water, wastewater treatment plant effluent, and bottled water.

Determination of trace bisphenols in milk based on Fe3O4@NH2-MIL-88(Fe)@TpPa magnetic solid-phase extraction coupled with HPLC

Herein, a covalent organic framework (COF) was grown on a magnetic metal-organic framework (MOF) by a solvothermal method for the efficient extraction of bisphenols (BPs). The magnetic solid-phase extraction (MSPE) of four bisphenols (bisphenol A, bisphenol B, bisphenol AF and bisphenol C) was carried out without adjusting the pH and salt concentration. When 30 mg Fe₃O₄@NH₂-MIL-88(Fe)@TpPa was used to adsorb for 25 min, 6 mL methanol was used to elute for 20 min, and the extract was detected by high-performance liquid chromatography (HPLC). The proposed method has a low detection limit of 0.011-0.036 ng mL^-1, a wide linear range of 0.05-100 ng mL^-1, and a correlation coefficient (R²) of 0.9980-0.9998. The intra-day and inter-day precisions are 0.74-2.54% and 1.68-3.72%, respectively. Bisphenol A was determined by applying the proposed method to the determination of actual milk samples. The standard addition experiment showed that the relative recovery of the four bisphenols was 85.70-119.7%. Pseudosecond-order, first-order, Langmuir and Freundlich models were applied to explore the adsorption characteristics of Fe₃O₄@NH₂-MIL-88(Fe)@TpPa. In general, the established Fe₃O₄@NH₂-MIL-88(Fe)@TpPa-MSPE-HPLC-UV method exhibits attractive sensitivity, simple manipulation, and excellent reusability, and it has excellent prospects for the detection of trace BPs in complex milk matrices.

An advantageous application of molecularly imprinted polymers in food processing and quality control

In the global market era, food product control is very challenging. It is impossible to track and control all production and delivery chains not only for regular customers but also for the State Sanitary Inspections. Certified laboratories currently use accurate food safety and quality inspection methods. However, these methods are very laborious and costly. The present review highlights the need to develop fast, robust, and cost-effective analytical assays to determine food contamination. Application of the molecularly imprinted polymers (MIPs) as selective recognition units for chemosensors' fabrication was herein explored. MIPs enable fast and inexpensive electrochemical and optical transduction, significantly improving detectability, sensitivity, and selectivity. MIPs compromise durability of synthetic materials with a high affinity to target analytes and selectivity of molecular recognition. Imprinted molecular cavities, present in MIPs structure, are complementary to the target analyte molecules in terms of size, shape, and location of recognizing sites. They perfectly mimic natural molecular recognition. The present review article critically covers MIPs' applications in selective assays for a wide range of food products. Moreover, numerous potential applications of MIPs in the food industry, including sample pretreatment before analysis, removal of contaminants, or extraction of high-value ingredients, are discussed.

New Aptamer/MoS2/Ni-Fe LDH Photoelectric Sensor for Bisphenol A Determination

Here, a new type of PEC aptamer sensor for bisphenol A (BPA) detection was developed, in which visible-light active MoS₂/Ni-Fe LDH (layered double hydroxide) heterostructure and aptamer were used as photosensitive materials and biometric elements, respectively. The combination of an appropriate amount of MoS₂ and Ni-Fe LDH enhances the photocurrent response, thereby promoting the construction of the PEC sensor. Therefore, we used a simple in situ growth method to fabricate a MoS₂/Ni-Fe LDH sensor to detect the BPA content. The aptasensor based on aptamer/MoS₂/Ni-Fe LDH displayed a linear range toward a BPA of 0.05-10 to 50-40,000 ng L^-1, and it has excellent stability, selectivity and reproducibility. In addition, the proposed aptamer sensor is effective in evaluating real water samples, indicating that it has great potential for detecting BPA in real samples.

Comparison and recent progress of molecular imprinting technology and dummy template molecular imprinting technology

Molecular imprinting technology for the preparation of polymers with specific molecular recognition function had become one of the current research hotspots. It has been widely applied in chromatographic separation, antibody and receptor mimetics, solid-phase extraction, bio-sensors, and other fields in the last decades. In this study, molecular imprinting technology was summarized from the points of templates and dummy templates, and four typical target analytes were selected to compare the differences between templates and dummy templates. The current status and prospects of molecular imprinting technology were also proposed.

Membrane Emulsification Process as a Method for Obtaining Molecularly Imprinted Polymers

The membrane emulsification process (ME) using a metallic membrane was the first stage for preparing a spherical and monodisperse thermoresponsive molecularly imprinted polymer (TSMIP). In the second step of the preparation, after the ME process, the emulsion of monomers was then polymerized. Additionally, the synthesized TSMIP was fabricated using as a functional monomer N-isopropylacrylamide, which is thermosensitive. This special type of polymer was obtained for the recognition and determination of trace bisphenol A (BPA) in aqueous media. Two types of molecularly imprinted polymers (MIPs) were synthesized using amounts of BPA of 5 wt.% (MIP-2) and 7 wt.% (MIP-1) in the reaction mixtures. Additionally, a non-imprinted polymer (NIP) was also synthesized. Polymer MIP-2 showed thermocontrolled recognition for imprinted molecules and a higher binding capacity than its corresponding non-imprinted polymer and higher than other molecularly imprinted polymer (MIP-1). The best condition for the sorption process was at a temperature of 35 °C, that is, at a temperature close to the phase transition value for poly(N-isopropylacrylamide). Under these conditions, the highest levels of BPA removal from water were achieved and the highest adsorption capacity of MIP-2 was about 0.5 mmol g-1 (about 114.1 mg g-1) and was approximately 20% higher than for MIP-1 and NIP. It was also observed that during the kinetic studies, under these temperature conditions, MIP-2 sorbed BPA faster and with greater efficiency than its non-imprinted analogue.

Imprinting Technology for Effective Sorbent Fabrication: Current State-of-Art and Future Prospects

In the last 10 years, we have witnessed an extensive development of instrumental techniques in analytical methods for determination of various molecules and ions at very low concentrations. Nevertheless, the presence of interfering components of complex samples hampered the applicability of new analytical strategies. Thus, additional sample pre-treatment steps were proposed to overcome the problem. Solid sorbents were used for clean-up samples but insufficient selectivity of commercial materials limited their utility. Here, the application of molecularly imprinted polymers (MIPs) or ion-imprinted polymers (IIPs) in the separation processes have recently attracted attention due to their many advantages, such as high selectivity, robustness, and low costs of the fabrication process. Bulk or monoliths, microspheres and core-shell materials, magnetically susceptible and stir-bar imprinted materials are applicable to different modes of solid-phase extraction to determine target analytes and ions in a very complex environment such as blood, urine, soil, or food. The capability to perform a specific separation of enantiomers is a substantial advantage in clinical analysis. The ion-imprinted sorbents gained interest in trace analysis of pollutants in environmental samples. In this review, the current synthetic approaches for the preparation of MIPs and IIPs are comprehensively discussed together with a detailed characterization of respective materials. Furthermore, the use of sorbents in environmental, food, and biomedical analyses will be emphasized to point out current limits and highlight the future prospects for further development in the field.

Evaluation of sewage sludge biochar and modified derivatives as novel SPE adsorbents for monitoring of bisphenol A

Sewage sludge is abundant biomass, the sustainable management of which remains a big issue worldwide. It was demonstrated that pyrolysis of sewage sludge using simple and cost-effective apparatus can produce biochars, suitable for solid-phase extraction applications of hydrophobic analytes. Detailed characterization showed that modification lead to three more hydrophobic and one more hydrophilic sample, compared to the original biochar. All samples were evaluated in the solid-phase extraction of the emerging contaminant Bisphenol A from aqueous solutions. KOH-SSB and KOH/MeOH-SSB exhibited the most promising behavior, with the latter achieving recoveries of 88.1%, at a quantity of 0.1 g at the natural pH of the BPA solution (6.5). The effect of solution pH was insignificant in the range of 4-7, whereas the initial BPA concentration had no effect in the recovery within the range of 1-100 μg L^-1. The mechanism of interaction between the optimum sample and BPA was based on hydrogen bonding and π-π interactions, establishing earlier observations that the type (and not concentration) of individual surface groups and the total surface area play a significant role in the process.

Fabrication and Adsorption Optimization of Novel Magnetic Core-shell Chitosan/Graphene Oxide/β-cyclodextrin Composite Materials for Bisphenols in Aqueous Solutions

A novel magnetic composite material, Fe3O4@SiO2/chitosan/graphene oxide/β-cyclodextrin (MCGC), was prepared by multi-step methods. Various methods were used to systematically characterize the morphology, composition, structure, and magnetic properties of MCGC. The results obtained show that the composite material has good morphology and crystal structure and can be separated quickly by an external magnetic field. The operation is relatively easy, and the raw materials used to prepare this material are economical, easy to obtain, and environmentally friendly. The performance and adsorption mechanism for using this material as an adsorbent to remove bisphenol A (BPA) and bisphenol F (BPF) from water were studied. The adsorption parameters were optimized. Under optimal conditions, MCGC was found to remove more than 90% of BPA and BPF in a mixed solution (20 mg/L, 50 mL); the adsorption process for BPA and BPF on MCGC was found to follow a Redlich-Peterson isotherm model and Pseudo-second-order kinetic model. The adsorption mechanism for MCGC may involve a combination of various forces. Recycling experiments showed that after five uses, MCGC retained a more than 80% removal effect for BPA and BPF, and through real sample verification, MCGC can be used for wastewater treatment. Therefore, MCGC is economical, environmentally friendly, and easy to separate and collect, and has suitable stability and broad application prospects.