A pH cooperative strategy for enhanced colorimetric sensing of Cr(III) ions using biocompatible L-glutamic acid stabilized gold nanoparticles

Picomolar level sensorial dual colorimetric gold nanoparticle sensor for Zn2+ and Hg2+ ions synthesized from bark extract of Lannea Grandis Coromandelica and its wide range applications in real sample analysis

In this work a facile, rapid, reproducible and non-toxic approach has been demonstrated for synthesis of most stable AuNPs from bark extract of Lannea Grandis Coromandelica. UV-Visible spectroscopy, FTIR, TEM, SAED, EDX, XRD, DLS, Zeta Potential, FE-SEM, AFM and XPS techniques were employed for the characterization of synthesized LGC-AuNPs. The UV-Vis spectra of LGC-AuNPs gave SPR peak at 536 nm while the TEM analysis revealed LGC-AuNPs have 20.75 nm size with spherical in shape. DLS study showed the AuNPs have average diameter 50.18 nm. The synthesized AuNPs exhibited very high selectivity, rapid response in recognition towards Zn2+ and Hg2+ ions by changing its color within 20 sec. This proposed sensor can detect very low picomolar level of Zn2+ and Hg2+ ions (LOD value for Zn2+ and Hg2+ were found 1.36 pM and 24.60 pM respectively). Here we also studied effect of several factors such as variation of conc of gold, temperature, incubation time, pH, salt, solvent (polar protic and polar aprotic) to know in which condition AuNPs have high stability and sensitivity. The data revealed that synthesized AuNPs was stable up to two years at pH 6.5 at room temperature in water media and under this condition, it shows maximum sensitivity and reactivity. Moreover, here interference study was carried out to identify high selectivity of synthesized LGC-AuNPs probe in presence of different metal ions. The real sample analyses also revealed the great applicability of this probe. Therefore, this simple, rapid, low-cost, sensing activity appeared to hold great sensibleness for detection of heavy metal ions in real sample.

Synthesis of multicolor silver nanostructures for colorimetric sensing of metal ions (Cr3+, Hg2+ and K+) in industrial water and urine samples with different spectral characteristics

In this work, we have synthesized four different color (yellow, orange, green, and blue (multicolor)) silver nanostructures (AgNSs) by chemical reduction method where silver nitrate, sodium borohydride and hydrogen peroxide were used as reagents. The as-synthesized multicolor AgNSs were successfully functionalized with bovine serum albumin (BSA) and applied as a colorimetric sensor for the assaying of metal cations (Cr³⁺, Hg²⁺, and K⁺). The addition of metal ions (Cr³⁺, Hg²⁺, and K⁺) into BSA functionalized AgNSs (BSA-AgNSs) causes the aggregation of BSA-AgNSs, and are accompanied by visual color changes with red or blue shift in the surface plasmon resonance (SPR) band of BSA-AgNSs. The BSA-AgNSs show different SPR characteristic for each metal ions (Cr³⁺, Hg²⁺, and K⁺) with exhibiting different spectral shift and color change. The yellow color BSA-AgNSs (Y-BSA-AgNSs) act as a probe for sensing Cr³⁺, orange color BSA-AgNSs (O-BSA-AgNSs) act as probe for Hg²⁺ ion assay, green color BSA-AgNSs (G-BSA-AgNSs) act as a probe for the assaying of both K⁺ and Hg²⁺, and blue color BSA-AgNSs (B-BSA-AgNSs) act as a sensor for colorimetric detection of K⁺ ion. The detection limits were found to be 0.26 μM for Cr³⁺ (Y-BSA-AgNSs), 0.14 μM for Hg²⁺ (O-BSA-AgNSs), 0.05 μM for K⁺ (G-BSA-AgNSs), 0.17 μM for Hg²⁺ (G-BSA-AgNSs), and 0.08 μM for K⁺ (B-BSA-AgNSs), respectively. Furthermore, multicolor BSA-AgNSs were also applied for assaying of Cr³⁺, and Hg²⁺ in industrial water samples and K⁺ in urine sample.

Review on Carbon Dot-Based Fluorescent Detection of Biothiols

Biothiols, such as cysteine (Cys), homocysteine (Hcy), and glutathione (GSH), play a vital role in gene expression, maintaining redox homeostasis, reducing damages caused by free radicals/toxins, etc. Likewise, abnormal levels of biothiols can lead to severe diseases, such as Alzheimer's disease (AD), neurotoxicity, hair depigmentation, liver/skin damage, etc. To quantify the biothiols in a biological system, numerous low-toxic probes, such as fluorescent quantum dots, emissive organic probes, composited nanomaterials, etc., have been reported with real-time applications. Among these fluorescent probes, carbon-dots (CDs) have become attractive for biothiols quantification because of advantages of easy synthesis, nano-size, crystalline properties, low-toxicity, and real-time applicability. A CDs-based biothiols assay can be achieved by fluorescent "Turn-On" and "Turn-Off" responses via direct binding, metal complex-mediated detection, composite enhanced interaction, reaction-based reports, and so forth. To date, the availability of a review focused on fluorescent CDs-based biothiols detection with information on recent trends, mechanistic aspects, linear ranges, LODs, and real applications is lacking, which allows us to deliver this comprehensive review. This review delivers valuable information on reported carbon-dots-based biothiols assays, the underlying mechanism, their applications, probe/CDs selection, sensory requirement, merits, limitations, and future scopes.

Conjugation of cysteamine functionalized nanodiamond to gold nanoparticles for pH enhanced colorimetric detection of Cr3+ ions demonstrated by real water sample analysis

A cysteamine functionalized nanodiamond (NDC) was conjugated to gold nanoparticles (AuNPs) to deliver NDC@AuNPs and utilized in enhanced colorimetric detection of Cr³⁺ at pH 6 environment. The conjugation was validated using FTIR, TEM, PXRD, DLS, and zeta potential investigations. At pH 6, superior sensory response of NDC@AuNPs to Cr³⁺ than that of other ions was validated by UV-vis spectroscopy and colorimetric photographs. Results from UV-vis titrations displayed a linear regression from 0.01 to 0.4 µM with a LOD of 0.236 ± 0.005 nM. The particle aggregation, size variations, potential changes, and binding modes are investigated using TEM, DLS, and FTIR techniques to explore the underlying mechanisms. By adding the EDTA, sensory response is reversible up to 4 cycles. Finally, spiked real water experiments show improved sensing of Cr³⁺ at pH 6 via the observed recovery between 96 and 110 %, which is in good agreement with the ICP-mass data.

Gold Nanoparticles-Based Colorimetric Assays for Environmental Monitoring and Food Safety Evaluation

Recent years have witnessed an exponential increase in the research on gold nanoparticles (AuNPs)-based colorimetric sensors to revolutionize point-of-use sensing devices. Hence, this review is compiled focused on current progress in the design and performance parameters of AuNPs-based sensors. The review begins with the characteristics of AuNPs, followed by a brief explanation of synthesis and functionalization methods. Then, the mechanisms of AuNPs-based sensors are comprehensively explained in two broad categories based on the surface plasmon resonance (SPR) characteristics of AuNPs and their peroxidase-like catalytic properties (nanozyme). SPR-based colorimetric sensors further categorize into aggregation, anti-aggregation, etching, growth-mediated, and accumulation-based methods depending on their sensing mechanisms. On the other hand, peroxidase activity-based colorimetric sensors are divided into two methods based on the expression or inhibition of peroxidase-like activity. Next, the analytes in environmental and food samples are classified as inorganic, organic, and biological pollutants, and recent progress in detection of these analytes are reviewed in detail. Finally, conclusions are provided, and future directions are highlighted. Improving the sensitivity, reproducibility, multiplexing capabilities, and cost-effectiveness for colorimetric detection of various analytes in environment and food matrices will have significant impact on fast testing of hazardous substances, hence reducing the pollution load in environment as well as rendering food contamination to ensure food safety.

Novel insight on chemo-specific detection of toxic environmental chromium residues existing as recalcitrant Cr(III)-carboxyl complexes using plasmonic silver nanoplatform bi-functionalized with citrate and PVP

Chromium (Cr) is a toxic environmental pollutant that majorly exists in trivalent and hexavalent forms. Though Cr(VI) is more dangerous than Cr(III), the trivalent Cr forms complexes with environmentally-available organic molecules. This makes them potentially harmful and difficult to detect. In this study, we have designed an ultrasensitive plasmonic nanosensor using citrate and PVP functionalized Ag nanoparticles (Ag-citrate-PVPNPs) for the detection of trivalent chromium organic complexes such as Cr(III)-EDTA (Cr-E), Cr(III)-acetate (Cr-A), Cr(III)-citrate (Cr-C) and Cr(III)-tartrate (Cr-T). The nanoparticles (NPs) were structurally characterized by XRD, SEM, HRTEM, SAED, EDX and elemental mapping. The citrate and PVP molecules played a vital role in the detection mechanism and stability of the sensor. Upon detection, the yellow-colored Ag-citrate-PVP NPs turned into different shades of brown depending on the type of the Cr complex and concentration. It was accompanied by diminishing and/or shifting UV-Visible absorbance peaks due to the aggregation of Ag-citrate-PVP NPs. Further, a linear relationship was observed between absorbance reduction and analyte concentration. The selectivity tests showed that the sensor was non-functional to other metal ions and inorganic anions. The sensor was optimized using pH and temperature studies. The mechanism of detection was elucidated with the help of characterization techniques such as Raman spectroscopy, FTIR, XPS and UV-visible spectrophotometer. The limit of detection (LOD) was found to be 3.29, 4.87, 1.76 and 1.79 nM for Cr-E, Cr-A, Cr-C and Cr-T complexes respectively. This study provides a rapid and sensitive approach for the detection of multiple Cr(III)-organic complexes present in an aqueous solution.

A controllable staining colorimetric method based on carboxylated cellulose membranes for early-warning and semi-quantitative detection of aflatoxins in water

A controllable staining colorimetric method was proposed for antibody-free detection of AFs by exploiting controllable electrostatic-staining of CCMs with Hg2+-capped AuNPs.

Diamond-Based Electrodes for Detection of Metal Ions and Anions

Diamond electrodes have long been a well-known candidate in electrochemical analyte detection. Nano- and micro-level modifications on the diamond electrodes can lead to diverse analytical applications. Doping of crystalline diamond allows the fabrication of suitable electrodes towards specific analyte monitoring. In particular, boron-doped diamond (BDD) electrodes have been reported for metal ions, anions, biomolecules, drugs, beverage hazards, pesticides, organic molecules, dyes, growth stimulant, etc., with exceptional performance in discriminations. Therefore, numerous reviews on the diamond electrode-based sensory utilities towards the specified analyte quantifications were published by many researchers. However, reviews on the nanodiamond-based electrodes for metal ions and anions are still not readily available nowadays. To advance the development of diamond electrodes towards the detection of diverse metal ions and anions, it is essential to provide clear and focused information on the diamond electrode synthesis, structure, and electrical properties. This review provides indispensable information on the diamond-based electrodes towards the determination of metal ions and anions.

3-Aminophenylboronic acid-mediated aggregation of gold nanoparticles for colorimetric sensing of iohexol in environmental and biological samples

Iohexol (IHO), as one of iodinated X-ray contrast, is often used as not only a chemical marker for tracking wastewater contamination in aquatic environment, but also an ideal glomerular filtration rate marker for explorating kidney disease. To these aims, it is important to establish reliable, fast, and cheap methods to detect IHO in environmental and biological samples. This work describes for the first time the development of a selective, sensitive and reliable colorimetric sensing assay for the fast determination of IHO in environmental and biological samples based on 3-aminophenylboronic acid (3-APBA) mediated aggregation of gold nanoparticles (AuNPs). In this approach, 3-APBA can assemble on the AuNPs surface through electrostatic interaction between its amino groups with the negatively charged citrate stabilizer of AuNPs to form AuNP@3-APBA. Subsequently, the aggregation and visual color change of the assembled AuNP@3-APBA are induced by the covalent reaction between boronic acid ligands of 3-APBA and cis-diols of IHO. The developed assay presented a very simple operating procedure and a rapid analysis time of around 10 min. The developed assay also exhibited good selectivity and a low limit of detection (LOD) of 0.005 mM for detecting IHO. Moreover, the developed assay showed comparable accuracy and precision to the high-performance liquid chromatography-diode array detector (HPLC-DAD) method when used for the rapid determination of IHO in river water and human urine samples. The recoveries of IHO at three spiking levels were in the range of 91.5-106.3% with relative standard deviation (RSD) values below 6.39%.

Progress in Metal-Organic Frameworks Facilitated Mercury Detection and Removal

Metal Organic Frameworks (MOFs) are noted as exceptional candidates towards the detection and removal of specific analytes. MOFs were reported in particular for the detection/removal of environmental contaminants, such as heavy metal ions, toxic anions, hazardous gases, explosives, etc. Among heavy metal ions, mercury has been noted as a global hazard because of its high toxicity in the elemental (Hg0), divalent cationic (Hg2+), and methyl mercury (CH3Hg+) forms. To secure the environment and living organisms, many countries have imposed stringent regulations to monitor mercury at all costs. Regarding the detection/removal requirements of mercury, researchers have proposed and reported all kinds of MOFs-based luminescent/non-luminescent probes towards mercury. This review provides valuable information about the MOFs which have been engaged in detection and removal of elemental mercury and Hg2+ ions. Moreover, the involved mechanisms or adsorption isotherms related to sensors or removal studies are clarified for the readers. Finally, advantages and limitations of MOFs in mercury detection/removal are described together with future scopes.

The effect of pH and transition metal ions on cysteine-assisted gold aggregation for a distinct colorimetric response

Colorimetric detection is a promising sensing strategy that is applicable to qualitative and quantitative determination of an analyte by monitoring visually detectable color changes with the naked eye. This study explored the cysteine (Cys)-induced aggregation of gold nanoparticles (AuNPs) in order to develop a sensitive colorimetric detection method for Cys. For this purpose, we systematically investigated the colorimetric response of AuNPs to Cys with varying particle sizes and concentrations. The AuNPs with various diameters ranging from 26.5 nm to 58.2 nm were synthesized by the citrate reduction method. When dispersed in water to have the same surface area per unit volume, the smaller AuNPs (26.5 nm) exhibited a more sensitive response to Cys compared to a larger counterpart (46.3 nm). We also examined the effect of divalent first-row transition metal ions (Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) on the Cys-induced aggregation of AuNPs. Among the tested metal ions, the addition of Cu²⁺ provided the highest enhancement in sensitivity to Cys regardless of pH between 3.5 and 7. The significant increase in the sensitivity caused by Cu²⁺ could be attributed to the capability of Cu²⁺ to form a highly stable chelate complex with surface-immobilized Cys, facilitating the aggregation of AuNPs. For the AuNPs–Cu²⁺ system at pH 7, the detection limit for Cys was determined to be 5 nM using UV-vis spectroscopy. The reported strategy showed the potential to be used for a rapid and sensitive detection of Cys and also metal ions that can facilitate Cys-mediated aggregation of AuNPs.

Divalent transition metal ions facilitated the aggregation of gold nanoparticles: Fe²⁺ < Ni²⁺ < Zn²⁺ < Co²⁺ ≪ Mn²⁺ < Cu²⁺ at pH 7. The optimized AuNPs-Cu²⁺ system produced the progressive color change upon the addition of cysteine (0.2–2.0 μM).