Cerium ion(III)-triggered aggregation-induced emission of copper nanoclusters for trace-level p-nitrophenol detection in water

Ultra-small water-soluble fluorescent copper nanoclusters for p-nitrophenol detection

Due to the widespread application of p-nitrophenol (p-NP) across various industries, particularly in the pharmaceutical and chemical sectors, it has emerged as a significant environmental contaminant in both soil and water ecosystems. The development of swift and sensitive detection platforms for p-NP is therefore demanding. Herein, a fluorescence sensor based on ultra-small copper nanoclusters with exterior glutathione ligands determined by electrospray ionization mass spectrometry (ESI-MS) as [Cu14(SG)12]+ (denoted as Cu-SG NCs) has been prepared in high efficiency, and shown high selectivity for p-NP detection. The Cu-SG NCs, synthesized via a facile one-pot chemical reduction technique, exhibit emission maxima at 620 nm. Notably, the introduction of p-NP into the nanocluster system causes a significant quenching of the Cu-SG NCs fluorescence. The quenching phenomenon arises predominantly as a result of the inner filter effect (IFE), which stems from the substantial overlap between the UV-Vis absorption spectrum of p-NP and the excitation wavelength of Cu-SG NCs. The developed fluorescence sensor platform demonstrates a wide determination range for p-NP, ranging from 0.04 to 2000 µM, with a detection limit of 30 nM. Additionally, the sensor efficacy was successfully validated in the analysis of actual water samples. The ease of synthesis, excellent optical properties, and low toxicity of Cu-SG NCs represent significant advantages over the reported noble metal nanomaterials and is highly promising for future practical applications.

Ratiometric fluorescence determination of alkaline phosphatase activity based on carbon dots and Ce3+-crosslinked copper nanoclusters

A new ratiometric fluorescent probe for efficient determination of ALP was developed. The probe was constructed by combining Ce3+-crosslinked copper nanoclusters (Ce3+-CuNCs) which exhibit the aggregation-induced emission (AIE) feature with carbon dots (CDs). The introduction of phosphate (Pi) induced the generation of CePO4 precipitation, resulting in significant decrease of fluorescence emission of CuNCs at 634 nm. At the same time, the fluorescence of CDs at 455 nm was obviously enhanced, thus generating ratiometric fluorescence response. Based on the fact that the hydrolysis of pyrophosphate (PPi) by ALP can produce Pi, the CD/Ce3+-CuNCs ratiometric probe was successfully used to determine ALP. A good linear relationship between the ratiometric value of F455/F634 and ALP concentrations ranging from 0.2 to 80 U·L- 1 was obtained, with a low detection limit of 0.1 U·L- 1. The ratiometric responses of the probe resulted in the visible fluorescence color change from orange red to blue with the increase of ALP concentration. The smartphone-based RGB recognition of the fluorescent sample images was used for ALP quantitative determination. A novel ratiometric fluorescent system based on Ce3+-CuNCs with AIE feature and CDs were constructed for efficient detection of ALP.

Construction of nanohybrid Tb@CDs/GSH-CuNCs as a ratiometric probe to detect phosphate anion based on aggregation-induced emission and FRET mechanism

The simple preparation of a nanohybrid of terbium-doped carbon dots/glutathione-capped copper nanoclusters (Tb@CDs/GSH-CuNCs) was for the first time developed for ratiometric detection of phosphate anion (Pi). Blue-emission of Tb@CDs can trigger non-luminescence of GSH-CuNCs for aggregation-induced emission (AIE) performance due to the strong reserved coordination capacity of Tb3+. Thus, Tb@CDs/GSH-CuNCs rapidly generated dual-emission signals at 630 nm and 545 nm by directly mixing the two individual materials via the AIE effect, alongside fluorescence resonance energy transfer (FRET) process. However, by the introduction of Pi, both AIE and FRET processes were blocked because of the stronger binding affinity of Tb3+ and Pi than that of Tb3+ and -COOH on Tb@CDs, thus realizing successful ratiometric detection of Pi. The linear concentration range was 0-16 μM, with the limit of detection (LOD) of 0.32 μM. The proposed method provided new ideas for designing nanohybrid of CDs and nanoclusters (MNCs) as ratiometric fluorescent probes for analytical applications.

Terbium-triggered aggregation-induced emission of bimetallic nanoclusters for anticancer drugs sensing via the inner filter effect

The development of accurate and sensitive detection methods of anticancer drugs is of significant importance because they play vital roles in biological systems. In recent years, bimetallic nanoclusters (BMNCs) incorporating the advantages of two metals have gained more and more attention, and can be widely applied in sensing applications. In this work, for the first time, we designed a sensing platform based on terbium ion (Tb³⁺) triggered aggregation-induced emission (AIE) of BMNCs. Tb³⁺ hybrid glutathione (GS) protected Ag/Cu nanoclusters (Tb³⁺@GS-AgCuNCs) were facilely fabricated according to the complexation reaction between Tb³⁺ and the carboxyl group of GS. Due to the inner filter effect (IFE), the fluorescence of Tb³⁺@GS-AgCuNCs decreased significantly in the presence of anticancer drugs with 6-thioguanine and methotrexate as representatives. In addition, the sensing platform was applied to monitor 6-thioguanine and methotrexate in real serum samples, indicating that it has great potential in anticancer drugs related applications.

Fluorescent folic acid-capped copper nanoclusters for the determination of rifampicin based on inner filter effect

Development of excellent sensors to determine trace concentrations of rifampicin is of intense importance for medicine analysis and human health. Herein, a facile and green fluorescent probe was established for the determination of rifampicin by using folic acid protected copper nanoclusters (FA-Cu NCs). Many characterization methods were applied for the analysis of the as-prepared FA-Cu NCs including UV-visible absorption spectra, fluorescence spectra, Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), fluorescence lifetime and X-ray photoelectron spectroscopy (XPS). The TEM image suggested that the as-prepared FA-Cu NCs were highly dispersed. The as-synthesized FA-Cu NCs emerged blue fluorescence under UV light and demonstrated maximum emission wavelength at 446 nm under the maximum excitation wavelength of 358 nm. After the addition of rifampicin, the FL intensities of FA-Cu NCs were uncommonly quenched. The related experimental data intimated that the quenching mechanisms were assumed to the inner filter effect (IFE) and static quenching. The as-proposed probe platform displayed an obvious linear relationship with rifampicin concentrations varying from 0.5 to 100 µM, and the corresponding detection limit (LOD) was 0.073 µM (S/N = 3). Finally, the as-established detection platform was successfully employed to analyze trace concentrations of rifampicin in real samples.

Ce3+-induced Fluorescence Amplification of Copper Nanoclusters Based on Aggregation-induced Emission for Specific Sensing 2,6-pyridine Dicarboxylic Acid

A straightforward, cost-effective and biocompatible reduction approach was applied to fabricate soluble but non-luminous glutathione-stabilized copper nanocluster (GSH-CuNCs). Surprisingly, as high as 1 × 10³ times fluorescence enhancement was acquired when Ce³⁺ was injected at an extremely low concentration of only 18 µM. Ce³⁺ outperformed other rare-earth metal ions in terms of inducing fluorescence amplification of the non-luminous GSH-CuNCs. Furthermore, Ce³⁺ was employed as inducer for aggregation-induce emission (AIE) effect as well as reactant to coordinate with target of 2,6-pyridine dicarboxylic acid (DPA) due to the stronger coordination ability between Ce³⁺ and DPA than that of Ce³⁺ and GSH. As a result, the Ce³⁺/GSH-CuNCs ensemble was developed as a novel sensor to detect DPA in the "on-off" mode. When DPA was introduced into the sensor, Ce³⁺ failed to interact with GSH and detached from the surface of GSH-CuNCs, leading to fluorescence quenching. In addition, static quenching process and internal filtration effect (IFE) between Ce³⁺/GSH-CuNCs and DPA were also responsible for fluorescence quenching effect. A good linear relationship was obtained from 0.3 µM to 18 µM, with a limit of detection (LOD) of 0.19 µM. The as-proposed probe displayed high specificity to DPA and provided a simple, fast rapid and cheap method for construction this type of ensemble sensors to detect other targets.

One-step synthesis of blue emission copper nanoclusters for the detection of furaltadone and temperature

Polyvinyl pyrrolidone (PVP), playing roles as a templating agent, can be applied to prepare blue-emitting copper nanoclusters (Cu NCs@PVP) on the basis of a rapid chemical reduction synthesis method. The Cu NCs@PVP displayed a blue emission wavelength at 430 nm and the corresponding quantum yield (QY) could reach 10.4%. Subsequently, the as-synthesized Cu NCs@PVP were used for the trace analysis of furaltadone based on the inner filter effect (IFE) between Cu NCs@PVP and furaltadone, which caused the fluorescence to be effectively quenched. Additionally, this proposed determination platform based on the Cu NCs@PVP for furaltadone sensing possessed an excellent linear range from 0.5 to 100 μM with a lower detection limit of 0.045 μM (S/N = 3). Meanwhile, the Cu NCs@PVP also could be applied for the sensing of temperature. Furthermore, the practicability of the sensing platform has been successfully verified by measuring furaltadone in real samples, affirming its potential to increase fields for the determination of furaltadone.

Ce3+ and Fe2+ co-enhanced ratiometric fluorescence probe utilizing copper nanoclusters and coumarin for sensitive assay of hydrogen peroxide and glucose

A novel ratiometric fluorescent probe was constructed for sensitive assay of hydrogen peroxide (H₂O₂) and glucose, which utilized the synergistically enhanced effects of Ce³⁺ and Fe²⁺ on copper nanoclusters (CuNCs) and coumarin. In the CuNCs-Ce³⁺/Fe²⁺-coumarin system, Ce³⁺ triggered the aggregation-induced emission phenomenon of CuNCs, and Fe²⁺ catalyzed the Fenton reaction to efficiently yield hydroxyl radical (•OH). In the presence of H₂O₂, the 625-nm red fluorescence of CuNCs was sharply quenched owing to the oxidation of CuNCs to Cu(II) by •OH, but the 460-nm blue fluorescence of 7-hydroxycoumarin from the oxidation of coumarin by •OH dramatically increased. Based on the reversible changes in two fluorescence signals, a satisfactorily ratiometric probe was constructed for H₂O₂ assay with a detection limit (LOD) of 0.6 μM accompanied by a visual color variation from red to blue. For glucose assay, this ratiometric probe gave a linear range of 3.2-160 μM and LOD of 0.96 μM owing to the oxidization of glucose to yield H₂O₂ in the presence of glucose oxidase and O₂. Overall, the newly developed ratiometric probe shows a great prospect in real applications for visual assay of H₂O₂ and glucose by our naked eyes.

Synthesis of Copper Nanoclusters and Their Application for Environmental Pollutant Probes: A Review

Copper nanoclusters (CuNCs) as a new type of probe for environmental contaminants are gaining increasing attention because of its low cost, superior water dispersibility, wide availability and excellent optical properties. Compared with the other probes such as quantum dots and organic dyes, CuNCs show much more potential in practical application for their excellent photostability, large Stokes shift, low toxicity and other preponderance, especially in the fields of biosensing and environmental monitoring. Recently, the template-assisted synthesis of metal nanoclusters (MNCs) has been widely studied. A variety of templates such as proteins, small thiol molecules, polymers, and DNA with different spatial configuration have been used for the preparation of MNCs so far. This review primarily described recent advances in CuNCs in terms of the synthesis of CuNCs from different templates, the methods to improve the fluorescence (FL) properties of CuNCs, as well as the basic detection mechanisms based on the FL properties or catalytic properties. Finally, to promote the practical application of CuNCs probes, the challenges and prospects of CuNCs multifunctional probes are also discussed.

One facile fluorescence strategy for sensitive determination of baicalein using trypsin-templated copper nanoclusters

Herein, we established a fluorescent detection platform for baicalein (Bai) based on copper nanoclusters, which were prepared by using copper sulfate as the precursor, trypsin (Tryp) as the template and hydrazine hydrate as the reducing agent. The entire preparation and testing process were rapid, facile and green. Many characterization methods, such as UV-vis absorption spectroscopy, fluorescence spectroscopy, fourier transform infrared spectroscopy (FT-IR), fluorescence lifetime, transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS), were applied for the analysis of trypsin-templated copper nanoclusters (Cu NCs@Tryp). The Cu NCs@Tryp released green fluorescence at maximum emission wavelength of 457 nm under maximum excitation wavelength of 377 nm. More importantly, the fluorescence of Cu NCs@Tryp was efficiently quenched by Bai. According to this phenomenon, a facile, rapid and selective turn-off fluorescence probe for Bai sensing was developed. Under the optimized testing conditions, the ln(F₀/F) value and concentration of Bai displayed excellent linear relationship changing from 0.5 to 60 μM (R² = 0.9969), and the detection limit was 0.078 μM. Furthermore, the Cu NCs@Tryp has been successfully employed to measure the amount of Bai in bovine serum samples with satisfactory recoveries.

Cation Crosslinking-Induced Stable Copper Nanoclusters Powder as Latent Fingerprints Marker

Luminescent copper nanoclusters (Cu NCs) have shown great potential in light-emitting devices (LEDs), chemical sensing, catalysis and biological fields. However, their practical use has been restricted by poor stability, and study on the stability of Cu NCs solid powder along with the mechanism is absent. In this study, stablized Cu NCs powder was first obtained by cation crosslinking method. Compared with the powder synthesized by solvent precipitation method, the stability of Cu NCs powder crosslinked by ionic inducer Ce3+ was enhanced around 100-fold. The storage time when the fluorescence intensity decreased to 85% (T85) was improved from 2 h to 216 h, which is the longest so far. The results of characterizations indicated that the aggregation structure was formed by the binding of Ce3+ with the capping ligands of Cu NCs, which helped in obtaining Ce-Cu NCs powder from aggregate precipitation in solution. Furthermore, this compact structure could avoid the destruction of ambient moisture resulting in long-lasting fluorescence and almost unchanged physical form. This demonstrated that phosphor, with excellent characteristics of unsophisticated synthesis, easy preservation and stable fluorescence, showed great potential in light sources, display technology and especially in latent fingerprints visualization on different substrates for forensic science.