Bisphenol A migration to alcoholic and non-alcoholic beverages – An improved molecular imprinted solid phase extraction method prior to detection with HPLC-DAD

Molecularly imprinted photopolymers combined with smartphone-based optical sensing for selective detection of bisphenol A in foods

Bisphenol A (BPA), known for its endocrine-disrupting properties and potential to leach into food products, has led to significant food safety concerns. Therefore, the development of sensitive and selective BPA rapid detection methods is crucial. In this study, molecularly imprinted solid-phase extraction coupled to a colorimetric method was adopted for the smartphone-based determination of BPA. The molecularly imprinted polymer (MIP) was prepared via photopolymerization and used as a selective adsorbent material for SPE columns. The solid-phase extraction (SPE) columns with multiple cycles significantly reduced the extraction time to only 30 min. The developed method demonstrates useful sensitivity for BPA (LOD = 30 ppb). Furthermore, BPA migration from plastic packaging was evaluated under different storage conditions, revealing that microwave treatment for 5 min led to BPA release from polycarbonate packaging in juice and basic solutions. The MIP selective extraction/clean-up and smartphone-based optical sensor were successfully applied to BPA standard solutions and complex food samples (e.g., juice and tap water), resulting in reproducible and selective BPA determination (RSD ≤ 6%, n = 3). This rapid and cost-effective method of producing MIPs for BPA offers a promising solution for fast and low-cost sensing for on-site fresh food analysis.

Highly efficient nanocomposites based on molecularly imprinted magnetic covalent organic frameworks for selective extraction of bisphenol A from liquid matrices

Highly efficient nanocomposites, hydrophobic molecularly imprinted magnetic covalent organic frameworks (MI-MCOF), have been farbricated by a facile Schiff-base reaction. The MI-MCOF was based on terephthalaldehyde (TPA) and 1,3,5-tris(4-aminophenyl) benzene (TAPB) as functional monomer and crosslinker, anhydrous acetic acid as catalyst, bisphenol AF as dummy template, and NiFe₂O₄ as magnetic core. This organic framework significantly reduced the time consumption of conventional imprinted polymerization and avoided the use of traditional initiator and cross-linking agents. The synthesized MI-MCOF exhibited superior magnetic responsivity and affinity, as well as high selectivity and kinetics for bisphenol A (BPA) in water and urine samples. The equilibrium adsorption capacity (Q_e) of BPA on the MI-MCOF was 50.65 mg g^-1, which was 3-7-fold higher than of its three structural analogues. The imprinting factor of BPA reached up to 3.17, and the selective coefficients of three analogues were all > 2.0, evidencing the excellent selectivity of fabricated nanocomposites to BPA. Based on the MI-MCOF nanocomposites, the magnetic solid-phase extraction (MSPE), combined with HPLC and fluorescence detection (HPLC-FLD), offered superior analytical performance: wide linear range of 0.1-100 μg L^-1, high correlation coefficient of 0.9996, low limit of detection of 0.020 μg L^-1, good recoveries of 83.5-110%, and relative standard deviations (RSDs) of 0.5-5.7% in environmental water, beverage, and human urine samples. Consequently, the MI-MCOF-MSPE/HPLC-FLD method provides a good prospect in selective extraction of BPA from complex matrices while replacing traditional magnetic separation and adsorption materials.

Preparation of Molecularly Imprinted Polymer Microspheres for Selective Solid-Phase Extraction of Capecitabine in Urine Samples

Molecularly imprinted solid-phase extraction to treat biological samples has attracted considerable attention. Herein, molecularly imprinted polymer (MIP) microspheres with porous structures were prepared by a combined suspension-iniferter polymerization method using capecitabine (CAP) as a template molecule. This material was subsequently used as a solid-phase extraction agent to separate and enrich drug molecules in urine samples. UV analysis revealed that methacrylate (MAA) was an ideal functional monomer, and 1H Nuclear Magnetic Resonance (1H NMR), Ultraviolet (UV), and Fourier transform-infrared (FT-IR) spectroscopic analyses were used to study the interaction forces between MAA and CAP, demonstrating that hydrogen bonding was the primary interaction force. MIPs with outstanding selectivity were successfully prepared, and the analysis of their surface morphology and chemical structure revealed a spherical morphology with small holes distributed across a rough surface. This surface morphology significantly reduced the mass transfer resistance of template molecules, providing an ideal template recognition effect. Using the molecularly imprinted solid-phase extraction method, CAP and the structural analog cytidine (CYT) were pretreated in urine samples and quantified by HPLC. The results showed that CAP and CYT recoveries reached 97.2% and 39.8%, respectively, with a limit of detection of 10.0–50.0 µg·mL−1. This study provides a novel approach to drug molecule pretreatment that can be applied in drug separation and functional materials science fields.

Ultrasensitive electrochemical sensor for detection of rutin antioxidant by layered Ti3Al0.5Cu0.5C2 MAX phase

MAX phases have attracted great attention due to unique features such as thermal and electrical conductivity, easy fabrication, heat resistant, and lightweight. In this study, an easy and green method was employed to successfully develop a Ti₃Al_0.5Cu_0.5C₂ MAX phase structure, and a Ti₃Al_0.5Cu_0.5C₂ based glassy carbon electrode (GCE) was applied for the electrochemical determination of rutin antioxidants in mandarin and kiwi samples. The developed Ti₃Al_0.5Cu_0.5C₂ MAX phase was characterized by different techniques such as X-ray photoelectron spectroscopy (XPS), thermogravimetry and differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), diffuse reflectance spectroscopy (DRS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) to obtain information on the structural and morphological properties. Electrochemical methods such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were employed for the determination of rutin using Ti₃Al_0.5Cu_0.5C₂/GCE. The GCE modified with Ti₃Al_0.5Cu_0.5C₂ demonstrated amplified electrochemical response (ca. 4.25 times) in comparison to the bare GCE towards rutin, and exhibited ultra-sensitivity and selectivity in the presence of other interfering antioxidants. Under the optimum conditions, good linearity in the range of 0.02-50.00 μmol L^-1 was obtained for rutin analysis by the Ti₃Al_0.5Cu_0.5C₂-based sensor with a limit of detection (LOD, 3σ/K) as low as 0.015 μmol L^-1. The fabricated Ti₃Al_0.5Cu_0.5C₂ MAX phase was applied to determine trace levels of rutin in mandarin and kiwi samples with validation by high-performance liquid chromatography (HPLC), thus highlighting its potential for the electrochemical determination of small molecules in the agricultural field.