Magnetic solid phase extraction of erythrosine (E127) in pharmaceutical samples with Fe3O4/C-nanodots hybrid material prior to spectrophotometric analysis

Green and efficient magnetic micro-solid phase extraction utilizing tea waste impregnated with magnetic nanoparticles for the analysis of ibuprofen in water samples by using UV-vis spectrophotometry

A green method based on magnetic micro-solid phase extraction (MNP-TW-μ-SPE) of tea waste impregnated with magnetic nanoparticles (MNP-TW) was developed for the extraction of ibuprofen (IBP) in water samples prior to UV-Vis spectrophotometric analysis. Experimenting parameters that affect the extraction efficiency of IBP, such as pH of the sample solution, sorbent dosage, extraction time, ionic strength, volume of the sample, type of desorption solvent, desorption time, and desorption volume, were studied and optimized in detail. The characterization studies for the MNP-TW were carried out by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectrometry (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis, a vibrating sample magnetometer (VSM), and thermogravimetric analysis (TGA). Under the optimum conditions, the linearity ranges from 30 to 700 μg L-1 for IBP, with determination coefficients (R2) of 0.9983. The limit of detection (LOD) and limit of quantification (LOQ) were 9.40 μg L-1 and 28.50 μg L-1, respectively. The method also demonstrated good precision in reproducibility (RSD ≤ 1.53%), repeatability (RSD ≤ 1.48%), and recovery (86-115%). This method represents the advantages of low solvent consumption, flexibility, and better sensitivity compared to other studies employing spectrophotometric analysis. The usage of tea waste in the extraction process presents many advantages, as it is biodegradable, versatile, and contributes to an intelligent and sustainable economic strategy projected toward a circular economy approach.

Rational Integration of ZIF-8 and BiPO4 for Energy Storage and Environmental Applications

Environmental pollution and energy storage are among the most pivotal challenges of today's world. The development of multifunctional materials is required to address these challenges. Our study presents the rational design and synthesis of a hybrid material (ZIF-8@BiPO₄) with dual functionality: an outstanding supercapacitor electrode and an excellent photocatalyst. The ZIF-8@BiPO₄ hybrid structure was obtained by conjoining zinc ions and 2-methylimidazole ligands toward BiPO₄ by a one-pot stirring route at room temperature. The ZIF-8@BiPO₄ resulted in considerably higher specific capacitance (Cs) (489 F g^-1 at a scan rate of 5 mV s^-1; 497 F g^-1 at a current density of 1 A g^-1) than that of pure BiPO₄ (358; 443 F g^-1) and ZIF-8 (185; 178 F g^-1) under the same conditions in a three-electrode cell using the 2 M KOH aqueous electrolyte. Afterward, an asymmetric supercapacitor (ASC) device was fabricated with BiPO₄ as the anode and ZIF-8@BiPO₄ as the cathodes, acquiring an outstanding Cs of 255 F g^-1 at a current density of 0.5 A g^-1 with significant cycling stability (81% over 10,000 cycles). Moreover, the ASC has an energy density of 17.5 Wh kg^-1and a power density of 13,695 W kg^-1, which can be considered to be at the borderline between batteries and supercapacitors. The photocatalytic activity of ZIF-8@BiPO₄ was further studied using a methylene blue (MB) dye and sildenafil citrate (SC) drug-active molecules. The degradation of MB was approximately 78% through the photocatalytic reduction after 180 min of UV irradiation. The outstanding characteristics together with the ecofriendly and low-cost preparation make ZIF-8@BiPO₄ appealing for a broad range of applications.