Thoughts about next-generation (S)TEM instruments in science

Perspective and prospects of in situ transmission/scanning transmission electron microscopy

In situ transmission/scanning transmission electron microscopy (TEM/STEM) measurements have taken a central stage for establishing structure-chemistry-property relationship over the past couple of decades. The challenges for realizing 'a lab-in-gap', i.e. gap between the objective lens pole pieces, or 'a lab-on-chip', to be used to carry out experiments are being met through continuous instrumental developments. Commercially available TEM columns and sample holder, that have been modified for in situ experimentation, have contributed to uncover structural and chemical changes occurring in the sample when subjected to external stimulus such as temperature, pressure, radiation (photon, ions and electrons), environment (gas, liquid and magnetic or electrical field) or a combination thereof. Whereas atomic resolution images and spectroscopy data are being collected routinely using TEM/STEM, temporal resolution is limited to millisecond. On the other hand, better than femtosecond temporal resolution can be achieved using an ultrafast electron microscopy or dynamic TEM, but the spatial resolution is limited to sub-nanometers. In either case, in situ experiments generate large datasets that need to be transferred, stored and analyzed. The advent of artificial intelligence, especially machine learning platforms, is proving crucial to deal with this big data problem. Further developments are still needed in order to fully exploit our capability to understand, measure and control chemical and/or physical processes. We present the current state of instrumental and computational capabilities and discuss future possibilities.

Determining E1 and E2 values for yttrium aluminum garnet ceramics using the Duane-Hunt limit

A major challenge when performing scanning electron microscopy and X-ray analysis on many ceramic materials is their electrical insulation properties, which leads to buildup of the surface charge and reduced contrast in the secondary electron image. A new procedure was established to quantitatively determine the neutral state values, E₁ and E₂ , of yttrium aluminum garnet (YAG) ceramics using the Duane-Hunt limit (E_DHL ) of Bremsstrahlung, in order to eliminate this charge effect. Thirty-eight E_DHL values were linearly fitted with the last portion of X-ray spectra acquired under the incident energy, E₀ , from 0.35 to 5.0 kV. According to the distribution of E_DHL , two piecewise linear fitting was first employed with a breakpoint of 1.0 kV. Consequently, two intersection points of 0.54 and 2.48 kV, which correspond to E₁ and E₂ for YAG ceramics, were directly determined using a theoretical curve (E_DHL  = E₀ ). As a result, the high-resolution images of the YAG ceramic grain structure were successfully obtained using the calculated E₁ and E₂ values.

A literature review of in situ transmission electron microscopy technique in corrosion studies

One of the biggest challenges in corrosion investigation is foreseeing precisely how and where materials will degenerate in a designated condition owing to scarceness of accurate corrosion mechanisms. Recent fast development of in situ transmission electron microscopy (TEM) technique makes it achievable to better understand the corrosion mechanism and physicochemical processes at the interfaces between samples and gases or electrolytes by dynamical capture the microstructural and chemical changes with high resolution within a realistic or near-realistic environment. However, a detailed and in-depth account summing up the development and latest achievements of in situ TEM techniques, especially the application of emerging liquid and electrochemical cells in the community of corrosion study in the last several years is lacking and is urgently needed for its heathy development. To fill this gap, this critical review summarizes firstly the key scientific issues in corrosion research, followed by introducing the configurations of several typical closed-type cells. Then, the achievements of in situ TEM using open-type or closed-type cells in corrosion study are presented in detail. The study directions in the future are commented finally in terms of spatial and temporal resolution, electron radiation, and linkage between microstructure and electrochemical performance in corrosion community.