Short-range ordering induced serrated flow in a carbon contained FeCoCrNiMn high entropy alloy

Tensile creep behavior and mechanism of CoCrFeMnNi high entropy alloy

As a potential novel superalloy, the study on the creep of high entropy alloys is of great significance. Equiatomic ratio CoCrFeMnNi with a mass of 6.7 kg was fabricated by vacuum induction levitation melting. Dendrite structure is obtained for as-cast alloy while a homogeneous equiaxed grain structure can be formed after annealing at 1273 K for 6 h. The tensile creep behavior of as-annealed alloy at 773-973 K and 50-340 MPa is systematically studied. Apparent dynamic recovery and recrystallization occur for creep at 973 K while high dislocation density can be observed for creep at 923 K and lower temperatures. Results of EDS analyses on fractured surface, stress exponent and activation energy for steady state creep rate suggest that the creep mechanism should be the dislocation viscous glide dragged by solute Mn at low stresses and low temperatures and be the dislocation climb associated with Mn diffusion at high stresses and high temperatures.

A Review of the Serrated-Flow Phenomenon and Its Role in the Deformation Behavior of High-Entropy Alloys

High-entropy alloys (HEAs) are a novel class of alloys that have many desirable properties. The serrated flow that occurs in high-entropy alloys during mechanical deformation is an important phenomenon since it can lead to significant changes in the microstructure of the alloy. In this article, we review the recent findings on the serration behavior in a variety of high-entropy alloys. Relationships among the serrated flow behavior, composition, microstructure, and testing condition are explored. Importantly, the mechanical-testing type (compression/tension), testing temperature, applied strain rate, and serration type for certain high-entropy alloys are summarized. The literature reveals that the serrated flow can be affected by experimental conditions such as the strain rate and test temperature. Furthermore, this type of phenomenon has been successfully modeled and analyzed, using several different types of analytical methods, including the mean-field theory formalism and the complexity-analysis technique. Importantly, the results of the analyses show that the serrated flow in HEAs consists of complex dynamical behavior. It is anticipated that this review will provide some useful and clarifying information regarding the serrated-flow mechanisms in this material system. Finally, suggestions for future research directions in this field are proposed, such as the effects of irradiation, additives (such as C and Al), the presence of nanoparticles, and twinning on the serrated flow behavior in HEAs.