Molecular cloning and biochemical characterization of a novel cold-adapted alpha-amylase with multiple extremozyme characteristics

Computational Insights into the Selecting Mechanism of α-Amylase Immobilized on Cellulose Nanocrystals: Unveiling the Potential of α-Amylases Immobilized for Efficient Poultry Feed Hydrolysis

The selection of an appropriate amylase for hydrolysis poultry feed is crucial for achieving improved digestibility and high-quality feed. Cellulose nanocrystals (CNCs), which are known for their high surface area, provide an excellent platform for enzyme immobilization. Immobilization greatly enhances the operational stability of α-amylases and the efficiency of starch bioconversion in poultry feeds. In this study, we immobilized two metagenome-derived α-amylases, PersiAmy2 and PersiAmy3, on CNCs and employed computational methods to characterize and compare the degradation efficiencies of these enzymes for poultry feed hydrolysis. Experimental in vitro bioconversion assessments were performed to validate the computational outcomes. Molecular docking studies revealed the superior hydrolysis performance of PersiAmy3, which displayed stronger electrostatic interactions with CNCs. Experimental characterization demonstrated the improved performance of both α-amylases after immobilization at high temperatures (80 °C). A similar trend was observed under alkaline conditions, with α-amylase activity reaching 88% within a pH range of 8.0 to 9.0. Both immobilized α-amylases exhibited halotolerance at NaCl concentrations up to 3 M and retained over 50% of their initial activity after 13 use cycles. Notably, PersiAmy3 displayed more remarkable improvements than PersiAmy2 following immobilization, including a significant increase in activity from 65 to 80.73% at 80 °C, an increase in activity to 156.48% at a high salinity of 3 M NaCl, and a longer half-life, indicating greater thermal stability within the range of 60 to 80 °C. These findings were substantiated by the in vitro hydrolysis of poultry feed, where PersiAmy3 generated 53.53 g/L reducing sugars. This comprehensive comparison underscores the utility of computational methods as a faster and more efficient approach for selecting optimal enzymes for poultry feed hydrolysis, thereby providing valuable insights into enhancing feed digestibility and quality.

High-solids enzymatic saccharification of starch-rich raw herbal biomass residues for producing high titers of glucose

The bioresource utilization of herbal biomass residues (HBRs) has been receiving more attention. Herein, three different HBRs from Isatidis Radix (IR) and Sophorae Flavescentis Radix (SFR) and Ginseng Radix (GR) were subjected to batch and fed-batch enzymatic hydrolysis to produce high-concentration glucose. Compositional analysis showed the three HBRs had substantial starch content (26.36-63.29%) and relatively low cellulose contents (7.85-21.02%). Due to their high starch content, the combined action of cellulolytic and amylolytic enzymes resulted in greater release of glucose from the raw HBRs compared to using the individual enzyme alone. Batch enzymatic hydrolysis of 10% (w/v) raw HBRs with low loadings of cellulase (≤ 10 FPU/g substrate) and amylolytic enzymes (≤ 5.0 mg/g substrate) led to a high glucan conversion of ≥ 70%. The addition of PEG 6000 and Tween 20 did not contribute to glucose production. Furthermore, to achieve higher glucose concentrations, fed-batch enzymatic hydrolysis was conducted using a total solid loading of 30% (w/v). After 48-h of hydrolysis, glucose concentrations of 125 g/L and 92 g/L were obtained for IR and SFR residues, respectively. GR residue yielded an 83 g/L glucose concentration after 96 h of digestion. The high glucose concentrations produced from these raw HBRs indicate their potential as ideal substrate for a profitable biorefinery. Notably, the obvious advantage of using these HBRs is the elimination of the pretreatment step, which is typically required for agricultural and woody biomass in similar studies.

Biotechnological potential of psychrophilic microorganisms as the source of cold-active enzymes in food processing applications

Microorganisms striving in extreme environments and exhibiting optimal growth and reproduction at low temperatures, otherwise known as psychrophilic microorganisms, are potential sources of cold-active enzymes. Owing to higher stability and cold activity, these enzymes are gaining enormous attention in numerous industrial bioprocesses. Applications of several cold-active enzymes have been established in the food industry, e.g., β-galactosidase, pectinase, proteases, amylases, xylanases, pullulanases, lipases, and β-mannanases. The enzyme engineering approaches and the accumulating knowledge of protein structure and function have made it possible to improve the catalytic properties of interest and express the candidate enzyme in a heterologous host for a higher level of enzyme production. This review compiles the relevant and recent information on the potential uses of different cold-active enzymes in the food industry.

Highly Efficient Computationally Derived Novel Metagenome α-Amylase With Robust Stability Under Extreme Denaturing Conditions

α-Amylases are among the very critical enzymes used for different industrial purposes. Most α-amylases cannot accomplish the requirement of industrial conditions and easily lose their activity in harsh environments. In this study, a novel α-amylase named PersiAmy1 has been identified through the multistage in silico screening pipeline from the rumen metagenomic data. The long-term storage of PersiAmy1 in low and high temperatures demonstrated 82.13 and 71.01% activities after 36 days of incubation at 4 and 50°C, respectively. The stable α-amylase retained 61.09% of its activity after 180 min of incubation at 90°C and was highly stable in a broad pH range, showing 60.48 and 86.05% activities at pH 4.0 and pH 9.0 after 180 min of incubation, respectively. Also, the enzyme could resist the high-salinity condition and demonstrated 88.81% activity in the presence of 5 M NaCl. PersiAmy1 showed more than 74% activity in the presence of various metal ions. The addition of the detergents, surfactants, and organic solvents did not affect the α-amylase activity considerably. Substrate spectrum analysis showed that PersiAmy1 could act on a wide array of substrates. PersiAmy1 showed high stability in inhibitors and superb activity in downstream conditions, thus useful in detergent and baking industries. Investigating the applicability in detergent formulation, PersiAmy1 showed more than 69% activity after incubation with commercial detergents at different temperatures (30–50°C) and retained more than 56% activity after incubation with commercial detergents for 3 h at 10°C. Furthermore, the results of the wash performance analysis exhibited a good stain removal at 10°C. The power of PersiAmy1 in the bread industry revealed soft, chewable crumbs with improved volume and porosity compared with control. This study highlights the intense power of robust novel PersiAmy1 as a functional bio-additive in many industrial applications.

Purification and characterization of a novel wild-type α-amylase from Antarctic sea ice bacterium Pseudoalteromonas sp. M175

A novel wild-type α-amylase named wtAmy175 from Pseudoalteromonas sp. M175 strain was purified through ammonium sulphate precipitation, DEAE cellulose, and Sephadex G-75 sequentially (25.83-fold, 7.67%-yield) for biochemical characterization. SDS-PAGE and zymographic activity staining of purified enzyme showed a single band with a predicted molecular mass of about 61 kDa. The optimum temperature and pH for enzyme activity were 30 °C and 7.5, respectively. Additionally, the enzyme exhibited high activity and remarkable stability in 0-10 mM SDS. The values of K_m and V_max for soluble starch as substrate were 2.47 mg/ml and 0.103 mg/ml/min, respectively. Analysis of hydrolysis products of soluble starch and maltooligosaccharides showed that wtAmy175 cleaved the interior and the terminal α-1,4-glycosidic linkage in starch, and had transglycosylation activity. The result of fluorescence spectroscopy showed that wtAmy175 had strong binding affinity with soluble starch. In brief, this study discovered the first wild-type α-amylase so far with several distinctive properties of cold activity, SDS-resistance, and the mixed activity of α-amylase and α-glucosidase, suggesting that wtAmy175 possess high adaptive capability to endure harsh industrial conditions and would be an excellent candidate in detergent and textile industries.

AmyZ1: a novel α-amylase from marine bacterium Pontibacillus sp. ZY with high activity toward raw starches

BACKGROUND

Starch is an inexpensive and renewable raw material for numerous industrial applications. However, most starch-based products are not cost-efficient due to high-energy input needed in traditional enzymatic starch conversion processes. Therefore, α-amylase with high efficiency to directly hydrolyze high concentration raw starches at a relatively lower temperature will have a profound impact on the efficient application of starch.

RESULTS

A novel raw starch digesting α-amylase (named AmyZ1) was screened and cloned from a deep-sea bacterium Pontibacillus sp. ZY. Phylogenetic analysis showed that AmyZ1 was a member of subfamily 5 of glycoside hydrolase family 13. When expressed in Escherichia coli, the recombinant AmyZ1 showed high activity at pH 6.0-7.5 and 25-50 °C. Its optimal pH and temperature were 7.0 and 35 °C, respectively. Similar to most α-amylases, AmyZ1 activity was enhanced (2.4-fold) by 1.0 mM Ca²⁺. Its half-life time at 35 °C was also extended from about 10 min to 100 min. In comparison, AmyZ1 showed a broad substrate specificity toward raw starches, including those derived from rice, corn, and wheat. The specific activity of AmyZ1 towards raw rice starch was 12,621 ± 196 U/mg, much higher than other reported raw starch hydrolases. When used in raw starch hydrolyzing process, AmyZ1 hydrolyzed 52%, 47% and 38% of 30% (w/v) rice, corn, and wheat starch after 4 h incubation. It can also hydrolyze marine raw starch derived from Chlorella pyrenoidosa, resulting in 50.9 mg/g DW (dry weight of the biomass) of reducing sugars after 4 h incubation at 35 °C. Furthermore, when hydrolyzing raw corn starch using the combination of AmyZ1 and commercial glucoamylase, the hydrolysis rate reached 75% after 4.5 h reaction, notably higher than that obtained in existing starch-processing industries.

CONCLUSIONS

As a novel raw starch-digesting α-amylase with high specific activity, AmyZ1 efficiently hydrolyzed raw starches derived from both terrestrial and marine environments at near ambient temperature, suggesting its application potential in starch-based industrial processes.

Cold survival strategies for bacteria, recent advancement and potential industrial applications

Microorganisms have evolved themselves to thrive under various extreme environmental conditions such as extremely high or low temperature, alkalinity, and salinity. These microorganisms adapted several metabolic processes to survive and reproduce efficiently under such extreme environments. As the major proportion of earth is covered with the cold environment and is exploited by human beings, these sites are not pristine anymore. Human interventions are a great reason for disturbing the natural biogeochemical cycles in these regions. The survival strategies of these organisms have shown great potential for helping us to restore these pristine sites and the use of isolated cold-adapted enzymes from these organisms has also revolutionized various industrial products. This review gives you the insight of psychrophilic enzyme adaptations and their industrial applications.

Molecular Cloning and Characterization of a Novel α-Amylase from Antarctic Sea Ice Bacterium Pseudoalteromonas sp. M175 and Its Primary Application in Detergent

A novel cold-adapted and salt-tolerant α-amylase gene (amy175) from Antarctic sea ice bacterium Pseudoalteromonas sp. M175 was successfully cloned and expressed. The open reading frame (ORF) of amy175 had 1722 bp encoding a protein of 573 amino acids residues. Multiple alignments indicated Amy175 had seven highly conserved sequences and the putative catalytic triad (Asp²⁴⁴, Glu²⁸⁶, and Asp³⁷²). It was the first identified member of GH13_36 subfamily which contained QPDLN in the CSR V. The recombinant enzyme (Amy175) was purified to homogeneity with a molecular mass of about 62 kDa on SDS-PAGE. It had a mixed enzyme specificity of α-amylase and α-glucosidase. Amy175 displayed highest activity at pH 8.0 and 25°C and exhibited extreme salt-resistance with the maximum activity at 1 M NaCl. Amy175 was strongly stimulated by Mg²⁺, Ni²⁺, K⁺, 1 mM Ca²⁺, 1 mM Ba²⁺, 1 mM Pb²⁺, 1 mM sodium dodecyl sulphate (SDS), and 10% dimethyl sulfoxide (DMSO) but was significantly inhibited by Cu²⁺, Mn²⁺, Hg²⁺, 10 mM β-mercaptoethanol (β-ME), and 10% Tween 80. Amy175 demonstrated excellent resistance towards all the tested commercial detergents, and wash performance analysis displayed that the addition of Amy175 improved the stain removal efficiency. This study demonstrated that Amy175 would be proposed as a novel α-amylase source for industrial application in the future.

Molecular improvements in microbial α-amylases for enhanced stability and catalytic efficiency

α-Amylases is one of the most important industrial enzyme which contributes to 25% of the industrial enzyme market. Though it is produced by plant, animals and microbial source, those from microbial source seems to have potential applications due to their stability and economic viability. However a large number of α-amylases from different sources have been detailed in the literature, only few numbers of them could withstand the harsh industrial conditions. Thermo-stability, pH tolerance, calcium independency and oxidant stability and starch hydrolyzing efficiency are the crucial qualities for α-amylase in starch based industries. Microbes can be genetically modified and fine tuning can be done for the production of enzymes with desired characteristics for specific applications. This review focuses on the native and recombinant α-amylases from microorganisms, their heterologous production and the recent molecular strategies which help to improve the properties of this industrial enzyme.

Catalytic hydrolysis of starch for biohydrogen production by using a newly identified amylase from a marine bacterium Catenovulum sp. X3

An identified cold-adaptive, organic solvents-tolerant alkaline α-amylase (HP664) from Catenovulum sp. strain X3 was heterologously expressed and characterized in E. coli, and it was further applied to starch saccharification for biohydrogen production. The recombinant HP664 belongs to a member of glycoside hydrolase family 13 (GH13), with a molecular weight of 69.6kDa without signal peptides, and also shares a relatively low similarity (49%) to other reported amylases. Biochemical characterization demonstrated that the maximal enzymatic activity of HP664 was observed at 35°C and pH 9.0. Most metal ions inhibited its activity; however, low polar organic solvents (e.g., benzene and n-hexane) could enhance the activity by 35-50%. Additionally, HP664 also exhibited the catalytic capability on various polysaccharides, including potato starch, amylopectin, dextrin and agar. In order to increase the bioavailability of starch for H₂ production, HP664 was utilized to elevate fermentable oligosaccharide level, and the results revealed that the maximal hydrolytic percentage of starch was up to 44% with 12h of hydrolysis using 5.63U of HP664. Biohydrogen fermentation of the starch hydrolysate by Clostridium sp. strain G1 yielded 297.7mL of H₂ after 84h of fermentation, which is 3.73-fold higher than the control without enzymatic treatment of HP664.

Biochemical properties of Glu-SH3 as a family 13 glycoside hydrolase with remarkable substrate specificity for trehalose: Implications to sequence-based classification of CAZymes

A novel glycoside hydrolase from Exiguobacterium sp. SH3 was characterized. The enzyme, designated as Glu-SH3, was predicted by in silico analysis to have structural similarity with members of oligo-1,6-glucosidase and trehalose-6-phosphate hydrolase subfamilies in the GH-13 family of glycoside hydrolases. The gene was expressed in Escherichia coli and the recombinant enzyme was purified as a His-tagged protein of about 60 kDa. The enzyme was shown to have remarkable substrate specificity for trehalose. The characteristic ability of Glu-SH3 to hydrolyze trehalose was ascertained by zymography, thin layer chromatography, and NMR spectroscopy. The maximum activity of Glu-SH3 was obtained at 35 °C and pH 7, but it was able to exhibit more than 90% of the activity within the pH range of 5-8. The Vmax and Km values were estimated to be 170 U and 4.5 mg ml(-1), respectively. By comparison with trehalases, Glu-SH3 with Kcat and Kcat/Km values of 1552 s(-1) and 119.4 mM(-1) s(-1) can be recognized as a very efficient trehalose-hydrolyzing glycosidase. Given the phylogeny and the substrate specificity of Glu-SH3, it may be assumed that the enzyme shares a common ancestor with oligo-1,6-glucosidases but have evolved distinctly to serve a physiological function in trehalose metabolism.

Bacterial and Archaeal α-Amylases: Diversity and Amelioration of the Desirable Characteristics for Industrial Applications

Industrial enzyme market has been projected to reach US$ 6.2 billion by 2020. Major reasons for continuous rise in the global sales of microbial enzymes are because of increase in the demand for consumer goods and biofuels. Among major industrial enzymes that find applications in baking, alcohol, detergent, and textile industries are α-amylases. These are produced by a variety of microbes, which randomly cleave α-1,4-glycosidic linkages in starch leading to the formation of limit dextrins. α-Amylases from different microbial sources vary in their properties, thus, suit specific applications. This review focuses on the native and recombinant α-amylases from bacteria and archaea, their production and the advancements in the molecular biology, protein engineering and structural studies, which aid in ameliorating their properties to suit the targeted industrial applications.