Choline based ionic liquids and their applications in organic transformation

Self-Assembly, Antimicrobial Properties and Biodegradability of Ester-Functionalized Choline-Based Surface-Active Ionic Liquids

Choline-based ionic liquids (ILs) have gained attention as antimicrobial and antibiofilm agents due to their biocompatibility and tuneable antimicrobial properties. However, a significant drawback of amphiphilic choline-based ILs is their decreasing biodegradability as the alkyl chain length increases. To address this issue and enhance the ecotoxicological profile of these compounds, a labile ester functionality was incorporated into the alkyl side chain. This strategic modification aims to improve biodegradation rates while maintaining the desirable antimicrobial properties of the ILs. A series of ester-functionalized choline-based ionic liquids (CnECholBr) with alkyl chains containing from 10 to 14 carbon atoms were synthesized, and their self-aggregation behaviour in aqueous solutions was studied. Their antimicrobial properties were then tested against clinically significant bacteria and yeasts, as well as their effectiveness in eliminating MRSA and C. albicans biofilms. Furthermore, the ecotoxicological properties of these compounds were investigated by assessing their aerobic biodegradability and aquatic toxicity using luminescent bacteria. The results indicated that CnECholBr exhibit higher surface activity and biodegradation rates than non-functionalized choline-based ILs. Conversely, their antimicrobial and antibiofilm activity was found to be lower to that of non-functionalized choline-based ILs. Among the compounds evaluated, the C12ECholBr was identified as the most effective antimicrobial and antibiofilm agent.

Extraction of Curcuminoids and Carvacrol with Biobased Ionic Liquids-Evaluation of Anti-Cancer Properties of Curcuminoid Extracts

Six biobased ionic liquids were prepared from saturated fatty acids (octanoic, decanoic and dodecanoic acids) and choline with yields up to 90% following procedures respecting green chemistry principles. These ionic liquids were fully characterized (NMR, IR, elemental analysis, viscosimetry and TGA) and used as extraction solvents for bioactive compounds (curcuminoids and carvacrol) using classical conditions, and the ionic liquids were able to be recovered after five runs without loss of activity. The ionic liquid containing a C12 carbon chain was the best extracting solvent, extracting 95% of the total curcuminoids contained in turmeric and 69% of the total carvacrol contained in oregano, which are higher yields compared to the extraction procedures described in the literature. As C12 ionic liquids were more cytotoxic than C8 ones, the biological activity of the curcuminoids extracted with C8 ionic liquids was evaluated on a MIAPaCa-2, a pancreatic adenocarcinoma cell line for which antitumor activity of curcuminoids had previously been reported. Compared to the cytotoxicity of the commercially available extract, the cytotoxic activity of the extracts was slightly weaker.

Trimetallic ferrite functionalized by guaninium tartrate ionic liquid (Co0.2Zn0.6Cu0.2Fe2O4-SiO2@[GuaH]+[Tar]2‒[GuaH]+) as a novel inorganic-bioorganic nanostructure to promote aqua-mediated synthesis of polyhydroxy-substituted pyridine-dipyrimidine fused heterocycles

In this work, a Cobalt-Zinc-Copper ferrite (Co0.2Zn0.6Cu0.2Fe2O4, CZCF) was synthesized and functionalized with silica and guaninium tartrate ionic liquid (Co0.2Zn0.6Cu0.2Fe2O4-SiO2@[GuaH]+[Tar]2‒[GuaH]+). The novel bio-nanostructure was characterized by various techniques such as fourier transform infrared spectroscopy (FT-IR), energy dispersive X-ray analysis (EDAX), EDAX mapping, field emission scanning electron microscopy (FESEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), thermogravimetric/differential thermal gravimetric analysis (TGA/DTG), vibrating sample magnetometry (VSM), high resolution transmission electron microscopy (HRTEM), and zeta potential analysis. The synthesized bio-nanocomposite exhibited high catalytic activity for the aqua-mediated synthesis of polyhydroxy-substituted pyridine-dipyrimidine fused heterocycles through the one-pot pseudo four-component reaction of carbohydrates (sugars), barbituric acid, and amines under refluxing conditions. The recyclability and reusability of the bio-nanocatalyst were successfully investigated for up to three runs. Moreover, the features of the recovered Co0.2Zn0.6Cu0.2Fe2O4-SiO2@[GuaH]+[Tar]2‒[GuaH]+ were examined via the EDAX analysis and FESEM images. In the theoretical section, the interaction sites between L-tartaric acid and guanine in an aqueous medium were investigated at the B3LYP/6-311++G(d,p) computational level. Additionally, the formation of more stable configurations of dimers and trimers in IL was studied from a thermodynamic point of view.

Ion pairing in aqueous tetramethylammonium-acetate solutions by neutron scattering and molecular dynamics simulations

Tetramethylammonium (TMA) is a ubiquitous cationic motif in biochemistry, found in the charged choline headgroup of membrane phospholipids and in tri-methylated lysine residues, which modulates histone-DNA interactions and impacts epigenetic mechanisms. TMA interactions with anionic species, particularly carboxylate groups of amino acid residues and extracellular sugars, are of substantial biological relevance, as these interactions mediate a wide range of cellular processes. This study investigates the molecular interactions between TMA and acetate, representing carboxylate-containing groups, using neutron scattering experiments complemented by force fields and ab initio molecular dynamics (MD) simulations. Neutron diffraction with isotopic substitution reveals specific ion pairing signatures between TMA and acetate, with simulations providing a detailed interpretation of the ion pairing structures. Force fields, notably CHARMM36 with the electronic continuum correction (ECC) (by a factor of 0.85) and AMBER99SB, capture essential pairing characteristics, but only revPBE-based ab initio MD simulations accurately model specific experimental features such as the low Q peak intensity in reciprocal space. Our study delivers a refined molecular model of TMA-carboxylate interactions, guiding the selection of force fields for complex biological systems where such interactions are of significant importance.

Effect of ionic liquid as a surfactant in hydroxyapatite coatings for improvement corrosion resistance of Ti-6Al-4V substrates for implant applications

Research on hydroxyapatite (HAP) coatings for bone tissue applications has been investigated for decades due to their significant osteoconductive and bioactivity properties. HAP closely resembles the mineral component of human bone, making it ideal for biomedical applications such as implants. This study investigates the synthesis of hydroxyapatite nanoparticles (HAP-NPs) via the microemulsion method, which is essential for creating HAP coatings on the Ti-6Al-4V substrate. A variety of surfactants, including ionic liquid (IL; 2-hydroxyethyl ammonium octanoate ([HEA]OC)) and sodium lauryl sulfate (SLS), were employed to control the nucleation and crystal growth of HAP-NPs. The synthesized nanoparticles were dispersed in isopropanol and applied to the Ti-6Al-4V using the spin coating technique for creating HAP coatings. The samples were characterized using techniques such as FTIR, HNMR, XRD, FESEM, EDS, and AFM. Tafel and Electrochemical impedance spectroscopy (EIS) analyses were used to evaluate the corrosion resistance of the coatings in a simulated body fluid (SBF). The use of IL as a surfactant led to a significant reduction in nanoparticle size from 37.32 nm to 24.80 nm, which is critical for enhancing the coating's properties. Surface roughness decreased dramatically from 84.28 nm to 12.48 nm, indicating a smoother coating that can improve the adhesion strength of coatings. Electrochemical tests demonstrated improved corrosion resistance of coatings, with the charge transfer resistance (Rct) for the HAP-0.4 IL coating reaching 7.84 MΩ × cm2, compared to 0.11 MΩ × cm2 for the bare Ti-6Al-4V. [HEA]OC as a surfactant improved the protective quality and uniformity of the HAP-IL coatings and reduced the surface roughness. These results indicate that modifying the surface of Ti-6Al-4V with HAP-IL coatings is a promising approach for enhancing its performance in biomedical applications.

Cellulose processing using ionic liquids: An analysis of patents and technological trends

The production of cellulose derivatives using ionic liquid (IL) as solvents and catalysts has become prominent over the last few years, since the process eliminates the use of toxic substances. This study aimed to map and understand the trends in cellulose processing using ILs by a patent analytic approach and technology life cycle modeling. The documents were searched on the Espacenet® and Orbit® platforms.The majority of innovations have come from companies based in developed countries. The data fitted to the sigmoid BiDoseResp model and the life cycle S-curve showed a market in an early stage of maturity. This mapping brings information that subsidizes decision-making regarding investments, research, and innovations aimed at IL-mediated cellulose treatment. Potential markets mostly use ILs of the imidazolium family in polymer chemistry, machinery, and biotechnology technologies. However, medical and pharmaceutical technologies and microstructure and nanostructure applications are still emerging, fostering perspectives for innovation.

Exploring the reclamation pathway science of Beachwood powder for pharmaceutical acetaminophen drug effluent management

High effective low-cost substance derived from agriculture-based waste towards a circular economy concept showed a significant green approach for pharmaceuticals uptake in aqueous solution. Beachwood sawdust was used as the source of cellulose based adsorbents. Cellulose is isolated from the waste and in parallel magnetite nanoparticles are prepared by the simple co-precipitation technique and the two substances are mixed in various proportions to be acetaminophen adsorbent. Characteristics of the prepared magnetite (M)/sawdust (SD) composite in various proportions (M:SD (1:1), M:SD (1:2), M:SD (1:3), M:SD (1:5) and M:SD (2:1) were assessed using scanning electron microscope (SEM) transmission electron microscope (TEM) and X-ray diffractometer (XRD) which revealed the presence magnetite and cellulose. Also, for the object of recoverable adsorbent, vibrating sample magnetometer (VSM) of the adsorbent is investigated to evaluate its sustainability. The highest removal rate was associated with M:SD (1:2) compared to the other composites and the pristine magnetite or sawdust materials within 2 hours of isotherm time. The adsorption parameters are optimized and the maximal yield is attained at pH (7.0), adsorbent dose of 2.0 g/L at room temperature. The adsorption matrix is following Langmuir model and fitted to the second-order kinetic model. The process is exothermic in nature and highlighted physisorption tendency. The highest monolayer adsorption uptake was investigated at 7.0 mg/g which corresponds to the M:SD (1:2) adsorbent.

Scattering approaches to unravel protein solution behaviors in ionic liquids and deep eutectic solvents: From basic principles to recent developments

Proteins in ionic liquids (ILs) and deep eutectic solvents (DESs) have gained significant attention due to their potential applications in various fields, including biocatalysis, bioseparation, biomolecular delivery, and structural biology. Scattering approaches including dynamic light scattering (DLS) and small-angle X-ray and neutron scattering (SAXS and SANS) have been used to understand the solution behavior of proteins at the nanoscale and microscale. This review provides a thorough exploration of the application of these scattering techniques to elucidate protein properties in ILs and DESs. Specifically, the review begins with the theoretical foundations of the relevant scattering approaches and describes the essential solvent properties of ILs and DESs linked to scattering such as refractive index, scattering length density, ion-pairs, liquid nanostructure, solvent aggregation, and specific ion effects. Next, a detailed introduction is provided on protein properties such as type, concentration, size, flexibility and structure as observed through scattering methodologies. This is followed by a review of the literature on the use of scattering for proteins in ILs and DESs. It is highlighted that enhanced data analysis and modeling tools are necessary for assessing protein flexibility and structure, and for understanding protein hydration, aggregation and specific ion effects. It is also noted that complementary approaches are recommended for comprehensively understanding the behavior of proteins in solution due to the complex interplay of factors, including ion-binding, dynamic hydration, intermolecular interactions, and specific ion effects. Finally, the challenges and potential research directions for this field are proposed, including experimental design, data analysis approaches, and supporting methods to obtain fundamental understandings of complex protein behavior and protein systems in solution. We envisage that this review will support further studies of protein interface science, and in particular studies on solvent and ion effects on proteins.

Enhancing Bioactivity of N,N,N-Chelating Rhodium(III) Complexes with Ionic Liquids: Toward Targeted Cancer Therapy

This study investigates the potential of using ionic liquids as cosolvents to enhance the solubility and activity of poorly soluble rhodium(III) complexes, particularly those with diene, pyridine derivatives, and camphor-derived bis-pyrazolylpyridine ligands, in relation to 5'-GMP, CT-DNA, and HSA as well as their biological activity. Findings indicate that ionic liquids significantly increase the substitution activity of these complexes toward 5'-GMP while only marginally affecting DNA/HSA binding affinities with molecular docking, further confirming the experimental results. Lipophilicity assessments indicated good lipophilicity. Notably, cytotoxicity studies show that Rh2 is selectively effective against HeLa cancer cells, with IL1 and IL10 modulating the cytotoxic effects. Redox evaluations indicate that rhodium complexes induce oxidative stress in cancerous cells while maintaining redox balance in noncancerous cells. By elucidating the role of ionic liquids in modulating these effects, the study proposes a promising avenue for augmenting the efficacy and selectivity of cancer treatments, thus opening new horizons in cancer therapeutics.

Binary mixture of ionic liquid and span 80 for oil spill remediation: Synthesis and performance evaluation

The synthesis of new surfactants helps to mitigate the environmental and financial effects of oil spills by providing efficient cleanup options. Herein, this study provides the development of a binary mixture of Span 80 and Choline myristate [Cho][Mys], a surface-active ionic liquid (SAIL) as green dispersant for oil spill remediation. The synergistic interaction at a 60:40 (w/w) ratio significantly lowered the critical micelle concentration (cmc) to 0.029 mM. Dispersion efficiency tests with Arab crude oil showed optimal performance at a 60:40 ratio of Span 80 and [Cho][Mys] (1:25 dispersant to oil ratio, v/v), achieving 81.16 % dispersion effectiveness in the baffled flask test. The binary mixture demonstrated superior emulsion stability (6 h) and the lowest interfacial tension (1.12 mN/m). Acute toxicity experiments revealed the dispersant's practical non-toxicity with an LC50 value of 600 mg/L. Overall, this environmentally benign surfactant combination shows promise as a safe and effective oil spill dispersant.

Biorefinery of brewery spent grain to obtain bioproducts with high value-added in the market

The brewery industry is under economic and environmental pressure to minimize residual management costs, particularly brewery spent grain (BSG), which accounts for 80-85% (w/w) of the total by-products generated. BSG is a lignocellulosic material primarily composed of carbohydrates, proteins and lipids. Developing a biorefinery model for conversion of BSG into value-added products is a plausible idea. Previous work optimized the pretreatment of BSG with the ionic liquid [N1112OH][Gly] and further release of fermentable sugar-containing solutions by enzymatic hydrolysis, using an enzymatic cocktail obtained by solid-state fermentation of BSG with Aspergillus brasiliensis CECT 2700 and Trichoderma reesei CECT 2414. The current work ends the biorefinery process, studying the fermentation of these culture media with two LAB strains, Lactobacillus pentosus CECT 4023 and Lactobacillus plantarum CECT 221, from which the production of organic acids, bacteriocins, and microbial biosurfactants (mBS) was obtained. In addition to the bacteriocin activity observed, a mass balance of the whole biorefinery process quantified the production of 106.4 g lactic acid and 6.76 g mBS with L. plantarum and 116.1 g lactic acid and 4.65 g mBS with L. pentosus from 1 kg of dry BSG. Thus, BSG shows a great potential for waste valorization, playing a major role in the implementation of biomass biorefineries in circular bioeconomy.

Ligand-Independent Activation of Aryl Hydrocarbon Receptor and Attenuation of Glutamine Levels by Natural Deep Eutectic Solvent

Natural deep eutectic solvents (NADESs) are emerging sustainable alternatives to conventional organic solvents. Beyond their role as laboratory solvents, NADESs are increasingly explored in drug delivery and as therapeutics. Their increasing applications notwithstanding, our understanding of how they interact with biomolecules at multiple levels - metabolome, proteome, and transcriptome - within human cell remain poor. Here, we deploy integrated metabolomics, proteomics, and transcriptomics to probe how NADESs perturb the molecular landscape of human cells. In a human cell line model, we found that an archetypal NADES derived from choline and geranic acid (CAGE) significantly altered the metabolome, proteome, and transcriptome. CAGE upregulated indole-3-lactic acid and 4-hydroxyphenyllactic acid levels, resulting in ligand-independent activation of aryl hydrocarbon receptor to signal the transcription of genes with implications for inflammation, immunomodulation, cell development, and chemical detoxification. Further, treating the cell line with CAGE downregulated glutamine biosynthesis, a nutrient rapidly proliferating cancer cells require. CAGE's ability to attenuate glutamine levels is potentially relevant for cancer treatment. These findings suggest that NADESs, even when derived from natural components like choline, can indirectly modulate cell biology at multiple levels, expanding their applications beyond chemistry to biomedicine and biotechnology.

Enhanced activity of Candida antarctica lipase B in cholinium aminoate ionic liquids: a combined experimental and computational analysis

As a class of ionic liquids with higher biocompatibility, cholinium aminoates ([Cho][AA]) hold potential as solvation media for enzymatic bioprocessing. Herein, solvation effect of [Cho][AA] on structural stability and enzymatic activity of Candida antarctica lipase B (CALB) was evaluated using experimental and computational approaches. Influence of [Cho][AA] on CALB stability was investigated using amino acid anions ([AA]-) with varying hydrophobicity levels. Choline phenylalaninate ([Cho][Phe]) resulted in 109.1% and 110.4% of relative CALB activity to buffer medium at 25 °C and 50 °C, respectively. Simulation results revealed the improvement of CALB's enzymatic activities by [AA]- with a strong hydrophobic character. Shielding of CALB from water molecules by [AA]- was observed. The level of CALB activity was governed by accumulation level of [AA]- at CALB's first hydration layer. The stronger interaction between His224 and Asp187 was postulated to be driven by [Cho][AA], resulting in the activity enhancement of CALB. The slight improvement of CALB activity in 0.05 M [Cho][Phe] at 50 °C could be due to the larger size of entrance to the catalytic site and the stronger interaction between the catalytic residues. The promising effect of [Cho][Phe] on CALB activation may stimulate research efforts in designing a 'fully green' bioreaction for various industrial applications.Communicated by Ramaswamy H. Sarma.

Emerging developments in dye-sensitized metal oxide photocatalysis: exploring the design, mechanisms, and organic synthesis applications

In the present day, the incorporation of environmentally conscious practices in the realm of photocatalysis holds a prominent position within the domain of organic synthesis. The imperative to tackle environmental issues linked to catalysts that cannot be recycled, generation of waste, byproducts, and challenges in achieving reaction selectivity during organic synthesis are more crucial than ever. One potential solution involves the integration of recyclable nanomaterials with light as a catalyst, offering the possibility of achieving sustainable and atom-efficient transformations in organic synthesis. Metal oxide nanoparticles exhibit activation capabilities under UV light, constituting a small percentage (4-8%) of sunlight. However, this method lacks sufficient environmental friendliness, and the issue of electron-hole recombination poses a significant hurdle. To tackle these challenges, multiple approaches have been proposed. This comprehensive review article focuses on the efficacy of dyes in enhancing the capabilities of heterogeneous photocatalysts, offering a promising avenue to overcome the constraints associated with metal oxides in their role as photocatalysts. The article delves into the intricate design aspects of dye-sensitized photocatalysts and sheds light on their mechanisms in facilitating organic transformations.

2,4-D versus 2,4-D based ionic liquids: Effect of cation on herbicide biodegradation, tfdA genes abundance and microbiome changes during soil bioaugmentation

The commercial formulations of herbicides rely on surfactants which increase the efficiency of active substance. Herbicidal ionic liquids (ILs), in which cationic surfactants are combined with herbicidal anions, allow for additives' reduction and ensure very good herbicide performance with lower doses. We aimed to test the impact of synthetic and natural cations on biological degradation of 2,4-dichlorophenoxyacetic acid (2,4-D). Although primary biodegradation was high, the mineralization in agricultural soil indicated incomplete conversion of ILs to CO₂. Even the introduction of naturally-derived cations resulted in an increase in the herbicide's half-lives - from 32 days for [Na][2,4-D] to 120 days for [Chol][2,4-D] and 300 days for the synthetic tetramethylammonium derivative [TMA][2,4-D]. Bioaugmentation with 2,4-D-degrading strains improves the herbicides' degradation, which was reflected by higher abundance of tfdA genes. Microbial community analysis confirmed that hydrophobic cationic surfactants, even those based on natural compounds, played a negative role on microbial biodiversity. Our study provides a valuable indication for further research related to the production of a new generation of environmentally friendly compounds. Moreover, the results shed a new light on the ionic liquids as independent mixtures of ions in the environment, as opposed to treating them as new type of environmental pollutants.

Advances in green solvents for production of polysaccharide-based packaging films: Insights of ionic liquids and deep eutectic solvents

The problems with plastic materials and the good film-forming properties of polysaccharides motivated research in the development of polysaccharide-based films. In the last 5 years, there has been an explosion of publications on using green solvents, including ionic liquids (ILs), and deep eutectic solvents (DESs) as candidates to substitute the conventional solvents/plasticizers for preparations of desired polysaccharide-based films. This review summarizes related properties and recovery of ILs and DESs, a series of green preparation strategies (including pretreatment solvents/reaction media, ILs/DESs as components, extraction solvents of bioactive compounds added into films), and inherent properties of polysaccharide-based films with/without ILs and DESs. Major reported advantages of these new solvents are high dissolving capacity of certain ILs/DESs for polysaccharides (i.e., up to 30 wt% for cellulose) and better plasticizing ability than traditional plasticizers. In addition, they frequently display intrinsic antioxidant and antibacterial activities that facilitate ILs/DESs applications in the processing of polysaccharide-based films (especially active food packaging films). ILs/DESs in the film could also be further recycled by water or ethanol/methanol treatment followed by drying/evaporation. One particularly promising approach is to use bioactive cholinium-based ILs and DESs with good safety and plasticizing ability to improve the functional properties of prepared films. Whole extracts by ILs/DESs from various byproducts can also be directly used in films without separation/polishing of compounds from the extracting agents. Scaling-up, including costs and environmental footprint, as well as the safety and applications in real foods of polysaccharide-based film with ILs/DESs (extracts) deserves more studies.

Glyphosate versus glyphosate based ionic liquids: Effect of cation on glyphosate biodegradation, soxA and phnJ genes abundance and microbial populations changes during soil bioaugmentation

The applicability of herbicidal ionic liquids (HILs) as an alternative form of herbicides is currently evaluated. Yet, the available research is lacking information on the behaviour of herbicidal ionic liquids upon addition to the environment, i.e., if cations and anions act as separate moieties or remain an ionic salt. Hence, we tested degradation of five HILs with the glyphosate anion, their bioavailability in soil, toxicity towards microorganisms, impact on the biodiversity and the abundance of phnJ and soxA genes. The cations were proven to be slightly or moderately toxic. The properties of cations determined the properties of the whole formulation, which might suggest that cations and anion act as the independent mixture of ions. The mineralisation efficiencies were in the range of 15-53%; however, in the case of cations (except non-toxic choline), only 13-20% were bioavailable for degradation. The hydrophobic cations were proven to be highly sorbed, while the anion was readily available for microbial degradation regardless of its counterion. The approach to enrich test samples with isolated microorganisms specialised in glyphosate degradation resulted in higher degradation efficiencies, yet not high enough to mitigate the negative impact of cations. In addition, increased activity of enzymes participating in glyphosate degradation was observed. In the view of obtained results, the use of cationic surfactants in HILs structure is not recommended, as sorption was shown to be determining factor in HILs degradation efficiency. Moreover, obtained results indicate that corresponding ions in HILs might act as separate moieties in the environment.

Ionic Liquid-Based Strategy for Predicting Protein Aggregation Propensity and Thermodynamic Stability

Novel drug candidates are continuously being developed to combat the most life-threatening diseases; however, many promising protein therapeutics are dropped from the pipeline. During biological and industrial processes, protein therapeutics are exposed to various stresses such as fluctuations in temperature, solvent pH, and ionic strength. These can lead to enhanced protein aggregation propensity, one of the greatest challenges in drug development. Recently, ionic liquids (ILs), in particular, biocompatible choline chloride ([Cho]Cl)-based ILs, have been used to hinder stress-induced protein conformational changes. Herein, we develop an IL-based strategy to predict protein aggregation propensity and thermodynamic stability. We examine three key variables influencing protein misfolding: pH, ionic strength, and temperature. Using dynamic light scattering, zeta potential, and variable temperature circular dichroism measurements, we systematically evaluate the structural, thermal, and thermodynamic stability of fresh immunoglobin G4 (IgG4) antibody in water and 10, 30, and 50 wt % [Cho]Cl. Additionally, we conduct molecular dynamics simulations to examine IgG4 aggregation propensity in each system and the relative favorability of different [Cho]Cl-IgG4 packing interactions. We re-evaluate each system following 365 days of storage at 4 °C and demonstrate how to predict the thermodynamic properties and protein aggregation propensity over extended storage, even under stress conditions. We find that increasing [Cho]Cl concentration reduced IgG4 aggregation propensity both fresh and following 365 days of storage and demonstrate the potential of using our predictive IL-based strategy and formulations to radically increase protein stability and storage.

Enabling Sustainable Chemistry with Ionic Liquids and Deep Eutectic Solvents: A Fad or the Future?

Ionic liquids (ILs) and deep eutectic solvents (DESs) debuted with a promise of a superior sustainability footprint due to their low vapor pressure. However, their toxicity and high cost compromise this footprint, impeding their real-world applications. Fortunately, their property tunability through a rational selection of precursors, including bioderived ones, provides a strategy to ameliorate toxicity, lower cost, and endow new functions. This Review discusses whether ILs and DESs are sustainable solvents and how they contribute to sustainable chemical processes.

Electrospun Magnetic Ionic Liquid Based Electroactive Materials for Tissue Engineering Applications

Functional electrospun fibers incorporating ionic liquids (ILs) present a novel approach in the development of active microenviroments due to their ability to respond to external magnetic fields without the addition of magnetic particles. In this context, this work reports on the development of magnetically responsive magneto-ionic fibers based on the electroactive polymer poly(vinylidene fluoride) and the magnetic IL (MIL), bis(1-butyl-3-methylimidazolium) tetrathiocyanatocobaltate ([Bmim]₂[(SCN)₄Co]). The PVDF/MIL electrospun fibers were prepared incorporating 5, 10 and 15 wt.% of the MIL, showing that the inclusion of the MIL increases the polar β-phase content of the polymer from 79% to 94% and decreases the crystallinity of the fibers from 47% to 36%. Furthermore, the thermal stability of the fibers decreases with the incorporation of the MIL. The magnetization of the PVDF/MIL composite fibers is proportional to the MIL content and decreases with temperature. Finally, cytotoxicity assays show a decrease in cell viability with increasing the MIL content.

Ionic liquid-based electroactive materials: a novel approach for cardiac tissue engineering strategies

Cardiac tissue regeneration strategies are increasingly taking advantage of electroactive scaffolds to actively recreate the tissue microenvironment. In this context, this work reports on advanced materials based on two different ionic liquids (ILs), 2-hydroxyethyl-trimethylammonium dihydrogen phosphate ([Ch][DHP]) and choline bis(trifluoromethylsulfonyl)imide ([Ch][TFSI]), combined with poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) for the development of ionic electroactive IL/polymer hybrid materials for cardiac tissue engineering (TE). The morphological, physico-chemical, thermal and electrical properties of the hybrid materials, as well as their potential use as scaffolds for cardiac TE applications, were evaluated. Besides inducing changes in surface topography, roughness and wettability of the composites, the incorporation of [Ch][DHP] and [Ch][TFSI] leads to the increase in surface (σ_surface) and volume (σ_volume) electrical conductivities. Furthermore, washing the hybrid samples with phosphate-buffered saline solution strongly decreases the σ_surface, whereas σ_surface and σ_volume of the composites remain almost unaltered after exposure to ultraviolet sterilization treatment. Additionally, it is verified that the incorporation of IL influences the P(VDF-TrFE) microstructure and crystallization process, acting as a defect during its crystallization. Cytotoxicity assays revealed that hybrid films based on [Ch][DHP] alone are not cytotoxic. These films also support H9c2 myoblast cell adhesion and proliferation, demonstrating their suitability for cardiac TE strategies based on electroactive microenvironments.

Ionic Liquids Assisted Topical Drug Delivery for Permeation Enhancement: Formulation Strategies, Biomedical Applications, and Toxicological Perspective

Topical drug delivery provides several benefits over other conventional routes by providing localizing therapeutic effects and also avoids the gastrointestinal tract circumventing the first-pass metabolism and enzymatic drug degradation. Being painless, the topical route also prevents the difficulties linked with the parenteral route. However, there are limitations to the current topical systems which necessitate the need for further research to find functional excipients to overcome these limitations. This review deals in depth with the ionic liquids concerning their physicochemical properties and applicability as well as their role in the arena of topical drug delivery in permeation enhancement, bioavailability enhancement of the drugs by solvation, and drug moiety modification. The review gives a detailed insight into the recent literature on ionic liquid-based topical formulations like ionic liquid-based emulsions, active pharmaceutical ingredient-ionic liquids, ionic liquid-based bacterial cellulose membranes, topical small interfering RNA (siRNA) delivery, and ionogels as a possible solutions for overcoming the challenges associated with the topical route. This review also takes into account the toxicological aspects and biomedical applications of ionic liquids.

Nitrogen Metabolism in Pseudomonas putida: Functional Analysis Using Random Barcode Transposon Sequencing

Pseudomonas putida KT2440 has long been studied for its diverse and robust metabolisms, yet many genes and proteins imparting these growth capacities remain uncharacterized. Using pooled mutant fitness assays, we identified genes and proteins involved in the assimilation of 52 different nitrogen containing compounds. To assay amino acid biosynthesis, 19 amino acid drop-out conditions were also tested. From these 71 conditions, significant fitness phenotypes were elicited in 672 different genes including 100 transcriptional regulators and 112 transport-related proteins. We divide these conditions into 6 classes, and propose assimilatory pathways for the compounds based on this wealth of genetic data. To complement these data, we characterize the substrate range of three promiscuous aminotransferases relevant to metabolic engineering efforts in vitro. Furthermore, we examine the specificity of five transcriptional regulators, explaining some fitness data results and exploring their potential to be developed into useful synthetic biology tools. In addition, we use manifold learning to create an interactive visualization tool for interpreting our BarSeq data, which will improve the accessibility and utility of this work to other researchers. IMPORTANCE Understanding the genetic basis of P. putida's diverse metabolism is imperative for us to reach its full potential as a host for metabolic engineering. Many target molecules of the bioeconomy and their precursors contain nitrogen. This study provides functional evidence linking hundreds of genes to their roles in the metabolism of nitrogenous compounds, and provides an interactive tool for visualizing these data. We further characterize several aminotransferases, lactamases, and regulators, which are of particular interest for metabolic engineering.

Ionic liquids enable the preparation of a copper-loaded gel with transdermal delivery function for wound dressings

Antibacterial hydrogel dressings play an important role in wound healing and infection treatment. The majority of hydrogels are obtained through chemical cross-linking and complex synthesis or processing. Copper ions (Cu²⁺) have been involved in sterilization; however, their direct use may lead to high local concentrations and heavy metal toxic side effects. Herein, dopamine (DA) was polymerized in situ along a polyvinyl alcohol (PVA) chain and chelated copper ions (Cu²⁺) to form a mixture. Ionic liquid (IL) choline-glycolate (CGLY) was added to the mixture to form an ionic gel. CGLY promotes gel formation through intermolecular hydrogen bonds with the polymer chains and avoids the use of toxic chemical crosslinking agents. Meanwhile, CGLY can also promote the release of Cu²⁺ and generate hydrogel free radicals (˙OH) in the wound through chemodynamic therapy to kill drug-resistant bacteria. In addition, the excellent transdermal property of CGLY enables the released Cu²⁺ to stimulate cell migration and accelerate wound healing. The gel exhibits favorable biocompatibility and its use has been demonstrated in skin infection therapy of mice.

Ionic Liquids: Environment-Friendly Greener Solvents for Organic Synthesis

Constituted by ions, ionic liquids (ILs) are evolving as greener solvents for many organic syntheses. Due to their high solvent power and low volatility, ionic liquids are serving as an environment-friendly substitute to conventional volatile organic solvents. The present review introduces ionic liquids as an insight into the diverse recent applications of ILs in organic synthesis.

Solvation and Ion-Pairing Effects of Choline Acetate Electrolyte in Protic and Aprotic Solvents Studied by NMR Titrations

Choline-based electrolytes have been proposed as environmentally friendly and low-cost alternatives for secondary zinc air batteries. Choline acetate [Ch]+ [OAc]- in protic (D2 O) and aprotic (DMSO-d6 ) solvents has been studied by means of concentration-dependent 1 H NMR, viscosity, and density measurements. The viscosities have been calculated on the basis of the Jones-Dole equation and showed that the dominant contribution originates from short-range ion-solvent interactions. Site-specific association affinities were assigned from NMR chemical shift titrations. In DMSO-d6 , the hydroxyl group of choline was found to have the smallest dissociation constant followed by the methyl group of acetate. The corresponding Gibbs energies at low concentration were found to be in agreement with a solvent-separated ion pair (2SIP) configuration, whereas at concentrations above 300 mM, a solvent-shared ion pair (SIP) configuration was assigned. For [Ch]+ [OAc]- in D2 O, association effects were found to be weaker, attributed to the high dielectric constant of the solvent. On time scales on the order of 100 ms, NMR linewidth perturbations indicated a change in the local rotational dynamics of the ions, attributed to short-range cation-solvent interactions and not to solvent viscosity. At 184 mM, ∼ 40 % of the cations in DMSO-d6 and ∼ 10 % in D2 O were found to exhibit short-range interactions, as indicated by the linewidth perturbations. It was found that at about 300 mM, the ions in DMSO-d6 exhibit a transition from free to collective translational dynamics on time scales on the order of 400 ms. In DMSO-d6 , both ions were found to be almost equally solvated, whereas in D2 O solvation of acetate was stronger, as indicated by the obtained effective hydrodynamic radii. For [Ch]+ [OAc]- in DMSO-d6 , the results suggest a solvent-shared ion association with weak H-bonding interactions for concentrations between 0.3-1 M. Overall, the extent of ion association in solvents such as DMSO is not expected to significantly limit charge transport and hinder the performance of choline-based electrolytes.

Effect of hydrogen bond donor molecules ethylene glycerol and lactic acid on electrochemical interfaces in choline chloride based-deep eutectic solvents

Choline chloride (ChCl)-based-deep eutectic solvents (DESs) are widely used in electrochemical fields. In this work, the effect of two types of hydrogen bond donor (HBD) molecules, ethylene glycerol and lactic acid (LA), on electrochemical interfaces between the Au electrode and DESs has been investigated by employing voltammetry and electrochemical impedance spectroscopy. The anodic dissolution and passivation behaviors of the Au electrode are revealed in both ethaline and ChCl:LA. In ChCl:LA, the anodic dissolution of Au is slowed down, and the passivation film is relatively dense and stable due to the existence of the carboxyl group in HBD molecule LA. In the double layer region, the lifting and formation of Au(111) surface reconstruction and a disorder-order phase transition of the chloride ion adlayer were observed in the two DESs. Moreover, compared with ethaline, an extra pair of current peaks appears in ChCl-LA possibly due to the adsorption and desorption of LA on the Au(111) surface, which might imply the stronger interaction of LA with the Au electrode in ChCl:LA. HBD LA could even have marked an impact on the disorder-order phase transition of the chloride ion adlayer. The above results provide new insight into the significant effect of HBD molecules on the anodic dissolution and the passivation of the Au electrode and the electrochemical behaviors in the double layer region.