Molecular arrangement between electrolyte and alcohol at the air/water interface

Quantifying the Influence of Electrolytes on the Kinetics of Spontaneous Emulsification

This study quantifies the influence of electrolytes on the kinetics of the spontaneous emulsification phenomenon (SEP) of heavy hydrocarbons in a nonionic surfactant solution. The rate of emulsifying hexadecane in Triton X-100, with the presence of sodium chloride and potassium chloride, has been measured using a technique of monitoring single oil droplet photography. The emulsion droplet size produced in the process was measured under the same conditions by using dynamic light scattering. The data obtained from the two experiments were employed to investigate the mass transfer coefficient of the surfactant molecules through the intermediate layer formed between hexadecane and the surfactant solution. It was found that the electrolytes in an aqueous solution increase the surfactant diffusion rate through the intermediate layer and reduce the emulsion droplet size. As a result, both electrolytes reduce the rate of spontaneous emulsification, with potassium chloride having a more substantial reduction. A model was developed to quantify the influence of electrolytes on the kinetics of the SEP. The data and modeling results verify the influence of ions on the kinetics of spontaneous emulsification. The results provide a significant foundation for predicting the solubilization of heavy hydrocarbons in an electrolyte solution.

Crucial roles of ion-specific effects in the flotation of water-soluble KCl and NaCl crystals with fatty acid salts

HYPOTHESIS

Flotation of water-soluble KCl and NaCl minerals in brines is significant for K-fertilizer production, but its mechanism is controversial. Dissolved salt ions are expected to change the physicochemical properties of solvents, interfaces, and collector colloids, thereby affecting flotation significantly.

EXPERIMENTS

Flotation experiments of KCl and NaCl crystals in brines were conducted using potassium and sodium laurates as collectors. Contact angle (CA) and surface tension measurements, X-ray photoelectron spectroscopy (XPS) analysis, and molecular dynamics simulations (MD) were applied to gain a molecular understanding of changing interfacial properties and crystal-collector colloid interactions in the presence of dissolved ions in terms of salt flotation.

FINDINGS

While K⁺ ions activate the NaCl crystal flotation, Na⁺ ions depress the KCl crystal flotation, in agreement with the studies of CA, XPS, and MD results with these crystals. XPS results showed no collector adsorption at crystal surfaces which is a requirement of conventional flotation and presents a new theoretical challenge. We argue the crucial role of ion specificity: Na-laurate colloids adsorb at the bubble surface as a monolayer but solvent-separated from KCl crystals, inhibiting their flotation, or in interactive contact with NaCl crystals, enhancing their flotation. Increasing K⁺ concentration weakens NaCl crystal hydration, increasing Na-laurate colloid attraction with crystals for better flotation. The Contact Interactive Collector Colloid (CICC) and Solvent-separated Interactive Collector Colloid (SICC) hydration states are critical to salt crystal flotation via collector colloid-crystal attraction by dispersion forces.

Unraveling the hydrophobic interaction mechanisms of hydrocarbon and fluorinated surfaces

HYPOTHESIS

Numerous hydrocarbon and fluorine-based hydrophobic surfaces have been widely applied in various engineering and bioengineering fields. It is hypothesized that the hydrophobic interactions of hydrocarbon and fluorinated surfaces in aqueous media would show some differences.

EXPERIMENTS

The hydrophobic interactions of hydrocarbon and fluorinated surfaces with air bubbles in aqueous solutions have been systematically and quantitatively measured using a bubble probe atomic force microscopy (AFM) technique. Ethanol was introduced to water for modulating the solution polarity. The experimental force profiles were analyzed using a theoretical model combining the Reynolds lubrication theory and augmented Young-Laplace equation by including disjoining pressure arisen from the Derjarguin-Landau-Verwey-Overbeek (DLVO) and non-DLVO interactions (i.e., hydrophobic interactions).

FINDINGS

The experiment results show that the hydrophobic interactions were firstly weakened and then strengthened by increasing ethanol content in the aqueous media, mainly due to the variation in interfacial hydrogen bonding network. The fluorinated surface exhibited less sensitivity to ethanol than hydrocarbon surface, which is attributed to the presence of ordered interfacial water layer. Our work reveals the different hydrophobic effects of hydrocarbon and fluorinated surfaces, with useful implications on modulating the interfacial interactions of relevant materials in various engineering and bioengineering applications.

Species Surface Distribution and Surface Tension of Aqueous Solutions of MIBC and NaCl Using Molecular Dynamics Simulations

Methyl isobutyl carbinol (MIBC) is a high-performance surfactant with unusual interfacial properties much appreciated in industrial applications, particularly in mineral flotation. In this study, the structure of air–liquid interfaces of aqueous solutions of MIBC-NaCl is determined by using molecular dynamics simulations employing polarizable and nonpolarizable force fields. Density profiles at the interfaces and surface tension for a wide range of MIBC concentrations reveal the key role of polarizability in determining the surface solvation of Cl⁻ ions and the expulsion of non-polarizable Na⁺ ions from the interface to the liquid bulk, in agreement with spectroscopic experiments. The orientation of MIBC molecules at the water liquid–vapor interface changes as the concentration of MIBC increases, from parallel to the interface to perpendicular, leading to a well-packed monolayer. Surface tension curves of fresh water and aqueous NaCl solutions in the presence of MIBC intersect at a reproducible surfactant concentration for a wide range of salt concentrations. The simulation results for a 1 M NaCl aqueous solution with polarizable water and ions closely capture the MIBC concentration at the intercept. The increase in surface tension of the aqueous MIBC/NaCl mixture below the concentration of MIBC at the intersection seems to originate in a disturbance of the interfacial hydrogen bonding structure of the surface liquid water caused by Na⁺ ions acting at a distance and not by its presence on the interface.

Inward Flow of Intervening Liquid Films Driven by the Marangoni Effect during Bubble-Solid Collisions in Ethyl Alcohol-NaCl Aqueous Solutions

The drainage dynamics of confined thin liquid films between an air bubble and a freshly cleaved mica surface were investigated in ethyl alcohol aqueous solutions. Focus was given to the holding stage, in which an unexpected increase in the thickness of a few hundred nanometers at the center of the film was captured by interferometry in ethyl alcohol-500 mM NaCl aqueous solutions. Such an increase in film thickness occurred when the ethyl alcohol concentration exceeded the critical value at a bubble approach velocity of 100 μm/s. For a given ethyl alcohol concentration, the increase in thickness at the center of the film did not happen when the bubble approach velocity was decreased to 10 μm/s. Compared to the cases in ethyl alcohol-500 mM NaCl solutions, no increase in thickness at the center of the film was observed in ethyl alcohol-water solutions under the same ethyl alcohol concentration and bubble approach velocity. The phenomenon of the increasing thickness at the center of the film was attributed to the net inward flow in the film, resulting from competition between the inward Marangoni flow and the outward drainage flow that was hindered by the narrow channel at the barrier rim of the film under a high electrolyte concentration. The inward Marangoni flow was achieved by a concentration gradient of ethyl alcohol between the film and the bulk solution resulting from the mobile air-liquid interface in the initial approaching period.