Amino acid based imidazolium zwitterions as novel and green corrosion inhibitors for mild steel: Experimental, DFT and MD studies

Zwitterions and betaines as highly soluble materials for sustainable corrosion protection: Interfacial chemistry and bonding with metal surfaces

The primary requirements for interfacial adsorption and corrosion inhibition are solubility and the existence of polar functional groups, particularly charges. Traditional organic inhibitors have a solubility issue due to the hydrophobic moieties they incorporate. Most documented organic inhibitors have aromatic rings, hydrocarbon chains, and a few functional groups. The excellent solubility and high efficacy of zwitterions and betaines make them the perfect replacements for insoluble corrosion inhibitors. Zwitterions and betaines are more easily soluble because of interactions between their positive and negative charges (-COO-, -PO3-, -NH3, -NHR2, -NH2R, -SO3- etc.) and the polar solvents. The positive and negative charges also aid these molecules' physical and chemical adsorption at the metal-electrolyte interfaces. They develop a corrosion-inhibiting layer through their adsorption. After becoming adsorbed at the metal-electrolyte interface, they act as mixed-type inhibitors, slowing both cathodic and anodic processes. They usually adsorb according to the Langmuir adsorption isotherm. In this article, the corrosion inhibition potential of zwitterions and betaines in the aqueous phase, as well as their mode of action, are reviewed. This article details the advantages and disadvantages of utilizing zwitterions and betaines for sustainable corrosion protection.

Experimental and computational approach on the development of a new Green corrosion inhibitor formulation for N80 steel in 20% formic acid

Organic acids are employed as scale dissolvers in the oil & gas industry during production to stimulate oil recovery by pumping in the formations. Corrosion of metallic surfaces in organic acid solutions poses a significant issue in the oil and gas sector. In recent years, considering the stringent environmental regulations, there has been a growing research interest in environmentally safe inhibitors. This paper explores the synthesis of 2-(3-(carboxymethyl)-1H-imidazol-3-ium-1-yl) acetate (IZ) and its first-time application for corrosion mitigation of N80 steel in 20% formic acid. A detailed experimental study involving gravimetric, electrochemical, and surface analytical techniques is reported herein. The electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP) analyses suggest a rise of impedance with IZ and a mixed-type inhibition behavior, respectively. The inhibition efficiency (IE) is 99.54% at 200 mg/L at 308 K, reaching 99.4% at 363 K with the introduction of KI as a synergistic agent. Computational studies revealed that the inhibitor IZ gets protonated in the experimental environment. The protonated form shows a tendency to receive electrons from the metal surface and shows a greater energy of adsorption compared to that of the neutral form.

Design and Synthesis of Novel Fluorescent 2-(aryloxy)-3-(4,5-diaryl)-1H-imidazol-2-yl)quinolines: Solvatochromic, DFT, TD-DFT Studies, COX-1 and COX-2 Inhibition and Antioxidant Properties

The present work focuses on the synthesis of novel heterocycles 2-(aryloxy)-3-(4,5-diaryl-1H-imidazol-2-yl)quinolines (6k-v) by an effective condensation reaction. These molecules exhibited fluorescent properties and hence for the proper understanding of their optical behavior and quantum yields, solvatochromic studies have been carried out. Further, frontier molecular orbitals, molecular electrostatic potential (MEP), and geometrical structure optimization have been investigated using the B3LYP/6-311G ++ (d, p) method. The energy gap between the HOMO, LUMO of the optical and energy band gap is determined by DFT and UV-visible spectra for TD-DFT studies are done. The screening of these compounds for in vitro COX-1 and COX-2 inhibition and DPPH free radical scavenging ability assays produced promising results. The binding interactions of these molecules against the COX-2 enzyme (PDB: 5IKR) were validated by docking studies.

Environmentally Benign Water-Soluble Sodium L-2-(1-Imidazolyl) Alkanoic Acids as New Corrosion Inhibitors for Mild Steel in Artificial Seawater

Three novel natural amino acid-derived sodium L-2-(1-imidazolyl) alkanoic acids (IZSs), namely, sodium 2-(1H-imidazol-1-yl)-4-methylpentanoate (IZS-L), sodium 2-(1H-imidazol-1-yl)-3-phenylpropanoate (IZS-P), and sodium 2-(1H-imidazol-1-yl)-4-(methylthio)butanoate (IZS-M), were investigated as corrosion inhibitors. The IZSs were synthesized following the green chemistry principles, and their structure was characterized using FTIR and NMR techniques. The corrosion study results reveal that a moderate concentration of IZSs (having low solution conductivity) showed potential corrosion inhibition for mild steel in artificial seawater. At longer immersion, IZS-P forms a uniform protective film and exhibits the potential inhibition efficiency of 82.46% at 8.4 mmol L^-1. Tafel polarization results reveal that IZS-P and IZS-M act as mixed types with an anodic predominantly corrosion inhibitor. The electrochemical impedance spectroscopy results signify that IZSs inhibit mild steel corrosion through the formation of an inhibitor film on the metal surface, which was further confirmed by the FTIR, SEM, EDX, and XPS studies. DFT result shows that in IZS-P, the benzylic group (-CH₂-Ph) has greater electron distribution compared to isobutyl (-CH₂CH(CH₃)₂) in IZS-L and methythioethyl group (-CH₂CH₂SCH₃) which supported the corrosion inhibition performance at longer immersion [IZS-P (82.46%) > IZS-M (67.19%) > IZS-L (24.77%)].

Experimental and computational approaches of methoxy naphthylbithiophene derivatives and their use as corrosion protection for carbon steel in acidic medium

The inhibition efficiency and adsorption affinity were investigated for two novel compounds, namely: 6-methoxy-2-naphthyl-[2, 2'-bithiophene]-5-carboxamidine hydrochloride salt (MA-1440) and 5'-(4-chlorophenyl)-2, 2'-bifuran-5-carboxamidine hydrochloride salt (MA-1456). The inhibition study was conducted on carbon steel surface in 1.0 M HCl with different inhibitor doses and different temperature levels, to investigate the optimum dose and preferable temperature. The performed investigation included chemical, electrochemical, instrumental, and quantum computation techniques. A chemical technique was accomplished by using weight-loss measurements. Different factors were studied using weight-loss measurements in order to reach the maximum inhibition efficiency. The adsorption study revealed that the examined inhibitors obey the Langmuir adsorption isotherm and are chemically adsorbed on the steel surface. The electrochemical measurements were accomplished through the electrochemical impedance (EIS) and potentiodynamic polarization (PDP) techniques. Based on the electrochemical measurements, the examined compounds were categorized as mixed inhibitors. The instrumental examination using different techniques namely: scanning electron microscope (SEM), energy dispersive X-ray (EDX), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) confirmed that the considered inhibitors are excellently adsorbed over the carbon steel surface. The extent of the adsorption affinity of these compounds on the carbon steel surface was studied theoretically using quantum computations and Monte Carlo simulation. The theoretical investigation results of quantum chemistry were validated with those obtained by chemical and electrochemical methodologies. All investigations prove that, the tested compounds were adsorbed chemically on the steel surface and achieved maximum inhibition efficiency of, 94.69% and 90.85% for M-1440 and MA-1456, respectively, at the optimum concentration 30 [Formula: see text] 10^-6 mol L^-1 and temperature 328 K.

Preparation of zwitterionic ionic surfactants-based sulphonyl for steel protections: Experimental and theoretical insights

Designating an organic inhibitor with a specific chemical structure that actively participates in steel protection by increasing adsorption on the steel surface. Based on that, we synthesized three zwitterionic surfactants based on azomethine with different hydrophobic chain lengths labeled ZWSO, ZWSD, and ZWSH. The presence of azomethine group, electrons, and heteroatoms in the zwitterionic surfactant’s amphipathic structure helped to improve C-steel protection. Their inhibitory activity toward steel corrosion was investigated utilizing electrochemical impedance spectroscopy (EIS), gravimetrical, and potentiodynamic polarization techniques. Importantly, the surfactant tail influenced corrosion inhibition performance; as surfactant tail length increased, so did inhibition efficiency due to increased adsorption affinity. The inhibition efficiencies of ZWSO, ZWSD, and ZWSH are 87.15, 89.82, and 91.36%, respectively. Tafel data clarified that ZWSO, ZWSD, and ZWSH inhibitors behave as mixed-type inhibitors following the modified Langmuir isotherm. The inhibitors can adsorb physiochemically on the steel surface with ∆G ads ranges from −38.48 to −44.6 kJ mol−1. The SEM confirms that the morphology of C-steel becomes smoother because of inhibitor adsorption. The DFT and MCs output data supported the experimental performance of the tested ZWSO, ZWSD, and ZWSH inhibitors and especially their dependence on surfactant tail length.

Corrosion protection of carbon steel by methoxy naphthylbithiophene derivatives in acidic medium: Electrochemical, surface characterization and computational approaches.. [DOI: 10.21203/rs.3.rs-2233861/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

The inhibition efficiency and adsorption affinity were investigated for two novel compounds, namely: 6-methoxy-2-naphthyl-[2, 2’-bithiophene]-5-carboxamidine hydrochloride salt (MA-1440) and 5'-(4-chlorophenyl)-2, 2’-bifuran-5-carboxamidine hydrochloride salt (MA-1456). The inhibition study was conducted on carbon steel surface in 1.0 M HCl with different inhibitor doses and different temperature levels, to investigate the optimum dose and preferable temperature. The performed investigation included chemical, electrochemical, instrumental, and quantum computation techniques. A chemical technique was accomplished by using weight-loss measurements. Different factors were studied using weight-loss measurements in order to reach the maximum inhibition efficiency. The adsorption study revealed that the examined inhibitors obey the Langmuir adsorption isotherm and are chemically adsorbed on the steel surface. The electrochemical measurements were accomplished through the electrochemical impedance (EIS) and potentiodynamic polarization (PDP) techniques. Based on the electrochemical measurements, the examined compounds were categorized as mixed inhibitors. The instrumental examination using different techniques namely: scanning electron microscope (SEM), energy dispersive X-ray (EDX), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) confirmed that the considered inhibitors are excellently adsorbed over the carbon steel surface. The extent of the adsorption affinity of these compounds on the carbon steel surface was studied theoretically using quantum computations and Monte Carlo simulation. The theoretical investigation results of quantum chemistry were validated with those obtained by chemical and electrochemical methodologies. All investigations prove that, the tested compounds were adsorbed chemically on the steel surface and achieved maximum inhibition efficiency of, 94.69% and 90.85% for M-1440 and MA-1456, respectively, at the optimum concentration 3010-6 mol. L-1 and temperature 328 K.

Development of Sustainable Inhibitors for Corrosion Control

Metal degradation due to corrosion is a major challenge in most industries, and its control and prevention has to maintain a balance between efficiency and cost-effectiveness. The rising concern over environmental damage has greatly influenced this domain, as corrosion prevention should comply with the waste regulations of different regions. In this respect, a fundamental question is which modern synthetic materials are more viable from the point of view of their effectiveness. Therefore, this paper is aims to provide an advanced and holistic review of corrosion prevention and control methods. Corrosion prevention techniques have become extensive; however, the literature indicates that polymer coatings, nano-composite coatings, and encapsulation techniques consistently provide the most efficient and feasible outcomes. Therefore, this review article examined the phenomenon of corrosion inhibition mainly from the perspective of these three techniques. Moreover, this research utilized secondary qualitative methods to obtain data and information on comparative techniques. It is found that due to the rapid development of novel materials, corrosion inhibition techniques need to be developed on scales that are more general, so that they could be applied to varying environments. The self-healing coatings are generally based on epoxy-resins incorporated with synthetic compounds such as inhibitor ions, amino-acids, or carboxylic acids. These coatings have become more widespread, especially due to bans on several traditional prevention materials such as compounds of chromium (VI). However, self-healing coatings are comparatively more costly than other techniques because of their method of synthesis and long-term durability. Therefore, although self-healing nanomaterial-based coatings are viable options for limited usage, their utilization in large and complex facilities is limited due to the costs involved. Amino acids and other biological macro-molecules provide another option to attain environmental sustainability and long durability, especially due to their origins being most of naturally occurring compounds such as lignin, cellulose, and proteins.

Environmental Remediation through Catalytic Inhibition of Steel Corrosion by Schiff’s Bases: Electrochemical and Biological Aspects

The environmental impact of corrosion is very dangerous and consumes much of world’s efforts and funds. This work discusses the safeguarding of the environment, metals, and metal-infra structures by efficient Schiff’s base inhibitors. The corrosion inhibitors [(1E,3E)-N1,N3-dibutyl-1-(thiophen-2-yl)butane-1,3-diimine] (GSB-I) and [(1Z,3Z)-N1,N3-bis(4-methylhexan-2-yl)-1-(thiophen-2-yl)butane-1,3-diimine] (GSB-II) were successfully synthesized and evaluated for the protection of API 5L X65 steel (CS) in 1 M HCl media using electrochemical techniques, SEM/EDS, and quantum chemical calculations. GSB-I and GSB-inhibitory I’s efficiency is proportional to the concentration of the test. In the presence of 1 mM GSB-I and GSB-II, the maximum inhibitory efficiency was determined to be 90.6 and 93.8 percent, respectively. According to potentiodynamic polarization tests, the two compounds are effective inhibitors of mixed-type corrosion. The physisorption and chemisorption of both inhibitors followed the Langmuir adsorption isotherm on CS surfaces. The biological reactivity of both GSB has been examined, and encouraging results have been obtained as antifungal, antibacterial, and biocidal agents against sulfate-reducing bacteria (SRB). In addition, using DFT calculations and molecular dynamic (MD) simulation, the effect of GSB-I and GSB-II molecular configuration on corrosion inhibition behavior in acidic environments was investigated.

Experimental and theoretical insights into copper corrosion inhibition by protonated amino-acids

The effects of cysteine (Cys) and l-methionine (l-Met) on copper corrosion inhibition were examined in 1 M HNO₃ solution for short and long exposure times. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) were used. The EIS determined the potential for zero charges of copper (PZC) in the inhibitor solution. SEM and AFM have been used to study material surfaces. Energy-dispersive X-ray spectroscopy (EDS) was used to identify surface elemental composition. DFT and molecular dynamics simulations explored the interaction between protonated amino acids and aggressive media anions on a copper (111) surface.

The effects of cysteine (Cys) and l-methionine (l-Met) on copper corrosion inhibition were examined in 1 M HNO₃ solution for short and long exposure times.

Calcite Scale Inhibition Using Environmental-Friendly Amino Acid Inhibitors: DFT Investigation

Scale prevention is a long-term challenge. It is essential for ensuring the optimum utilization of oil and gas wells and minimizing economic losses due to disruptions in the hydrocarbon flow. Among the commonly precipitated scales is calcite, especially in oilfield production facilities. Previous studies on scale inhibitors have focused on investigating the performance of several phosphonates and carboxylates. However, the increased environmental awareness has pushed toward investigating environmental-friendly inhibitors. Research studies demonstrated the potential of using amino acids as standalone inhibitors or as inhibitor-modifying reagents. In this study, 10 amino acids for calcite inhibitors have been investigated using molecular simulations. Eco-toxicity, quantum chemical calculations, binding energy, geometrical, and charge analyses were all evaluated to gain a holistic view of the behavior and interaction of these inhibitors with the calcite {1 0 4} surface. According to the DFT simulation, alanine, aspartic acid, phenylalanine, and tyrosine amino acids have the best inhibitor features. The results revealed that the binding energies were -2.16, -1.75, -2.24, and -2.66 eV for alanine, aspartic acid, phenylalanine, and tyrosine, respectively. Therefore, this study predicted an inhibition efficiency of the order tyrosine > phenylalanine > alanine > aspartic acid. The predicted inhibition efficiency order reveals agreement with the reported experimental results. Finally, the geometrical and charge analyses illustrated that the adsorption onto calcite is physisorption in the acquired adsorption energy range.

Expired Chicken Egg-White Extract’s Adsorption Behavior As a Corrosion Inhibitor for Carbon Steel in 1M HCl

The inhibitory activity of the expired egg-white carbon steel (CS) extract in HCl solution was studied in this article. The extract was examined using FT-IR, and the surface was examined using a scanning electron microscope (SEM) and energy-dispersive X-ray analysis (EDX). Weight loss techniques at various temperatures were used to examine corrosion investigations (298, 308, 318, and 328 K), concentrations (100, 200, 400, and 800 mg. L−1) of extracts, and electrochemical measurements (potentiodynamic polarization (PDP) and impedance spectroscopy (EIS) at 25°C and different concentrations. Results. Results obtained through EIS demonstrated a maximal inhibition efficiency of 90% at an inhibitor concentration of 800 mg. L−1. Moreover, the findings of the potentiodynamic polarization indicated that egg-white extract was a mixed type of inhibitor and slowed down both cathodic and anodic reactions. For weight loss analysis, an inhibitory potency (89, 83, 77, and 71%) at various temperatures (298, 308, 318, and 328 K) was demonstrated, respectively. It indicates that the temperature rise contributes to a decrease in the resistance of the carbon steel. The adsorption of the expired egg-white extract was spontaneous with physisorption and chemisorption according to the Langmuir isotherm model, according to adsorption isotherm studies.

Molecular modelling of compounds used for corrosion inhibition studies: a review

Molecular modelling of organic compounds using computational software has emerged as a powerful approach for theoretical determination of the corrosion inhibition potential of organic compounds. Some of the common techniques involved in the theoretical studies of corrosion inhibition potential and mechanisms include density functional theory (DFT), molecular dynamics (MD) and Monte Carlo (MC) simulations, and artificial neural network (ANN) and quantitative structure-activity relationship (QSAR) modeling. Using computational modelling, the chemical reactivity and corrosion inhibition activities of organic compounds can be explained. The modelling can be regarded as a time-saving and eco-friendly approach for screening organic compounds for corrosion inhibition potential before their wet laboratory synthesis would be carried out. Another advantage of computational modelling is that molecular sites responsible for interactions with metallic surfaces (active sites or adsorption sites) and the orientation of organic compounds can be easily predicted. Using different theoretical descriptors/parameters, the inhibition effectiveness and nature of the metal-inhibitor interactions can also be predicted. The present review article is a collection of major advancements in the field of computational modelling for the design and testing of the corrosion inhibition effectiveness of organic corrosion inhibitors.