Fabrication of oxidized graphite supported La2O3/ZrO2 nanocomposite for the photoremediation of toxic fast green dye

Green synthesis of silver nanoparticles using Adhatoda vasica leaf extract and its application in photocatalytic degradation of dyes

The paper describes biogenic synthesis of silver nanoparticles (AgNPs) using Adhatoda vasica leaf extracts at room temperature. The prepared AgNPs were characterized by UV-visible spectroscopy, Fourier-transform infrared spectroscopy, powder X-ray diffraction, Energy dispersive X-ray (EDX), High Resolution Transmission Electron Microscope, Scanning Electron Microscopy and Thermogravimetric analyser. The bio reduction method is devoid of any toxic chemicals, organic solvents, and external reducing, capping and stabilizing agent. The synthesized AgNPs had spherical shape with particle size ranging between 3.88 and 23.97 nm and had face centered cubic structure. UV-visible spectral analysis confirmed the formation of AgNPs with a characteristic surface plasmon resonance band at 419 nm. The EDX pattern revealed the presence of elemental Ag in AgNPs. The prepared AgNPs were used for degradation of Amaranth, Allura red and Fast green in aqueous medium, with ≥ 92.6% efficiency within 15 min using 5 mg of AgNPs. The optical bandgap, Eg value of 2.26 eV for AgNPs was found to be effective for rapid photocatalytic degradation of all the three dyes. The degradation process was observed to follow pseudo first order kinetics.

Development of a ZnOS+C Composite as a Potential Adsorbent for the Effective Removal of Fast Green Dye from Real Wastewater

Wastewater treatment is becoming increasingly important due to the potential shortage of pure drinking water in many parts of the world. Adsorption offers a potential technique for the uptake of contaminants and wastewater purification. In the last two decades, several efforts have been made to remove fast green (FG) dye from wastewater via different adsorbent materials. However, adsorption capacity shown by these adsorbents is low and time-consuming. Herein, we have synthesized for the first time a new powdered adsorbent ZnOS+C, modified zinc peroxide with sulfur and activated carbon to effectively remove FG dye from wastewater. Results of batch adsorption experiments have suggested that ZnOS+C has the maximum adsorption potential of 238.28 mg/g for FG dye within 120 min of adsorption equilibrium for a wide range of pH ranging from 2 to 10 pH. The adsorption process conforms to the Freundlich isotherm model, suggesting a multilayered adsorption process on the outer surface of ZnOS+C. The adsorption kinetics study indicates that the kinetics of the reaction are the intraparticle diffusion model. Briefly, this study shows proof of the application of ZnOS+C powder as a new eco-friendly adsorbent with extremely high efficiency and high surface area for removing FG dye.

Fabrication of La2O3/g-C3N4 Heterojunction with Enhanced Photocatalytic Performance of Tetracycline Hydrochloride

In this study, La2O3/g-C3N4 heterojunction photocatalysts doped with different dosages of La2O3 were constructed by a facile ultrasound-assisted calcination approach. The as-prepared photocatalysts were characterized by XRD, FTIR, FESEM, TEM, XPS, PL and DRS to verify the composite photocatalysts’ purity and to investigate their structural, morphological and elemental composition, and their energy band. According to the results, a type of pure rod–sheet-shaped, heterostructured nanoparticle was successfully obtained. Decorated with 10% La2O3, 2 g/L of the composite sample had a 93% degradation rate for 20 mg/L tetracycline hydrochloride within 2 h under visible light at a pH of 7. After four successive photocatalytic runs, satisfactory stability and reusability was exhibited, with 70% of the tetracycline hydrochloride being removed in the final experiment. Electrons (e−), photogenerated holes (h+), superoxide radical anions (·O2−) and hydroxyl radicals (·OH) were the fundamental active species during the photocatalytic process and were investigated via quenching experiments. Furthermore, possible photocatalytic mechanisms were analyzed in this work.

Advances in the Application of Nanocatalysts in Photocatalytic Processes for the Treatment of Food Dyes: A Review

The use of food additives (such as dyes, which improve the appearance of the products) has become more prominent, due to the rapid population growth and the increase in demand for beverages and processed foods. The dyes are usually found in effluents that are discharged into the environment without previous treatment; this promotes mass contamination and alters the aquatic environment. In recent years, advanced oxidation processes (AOPs) have proven to be effective technologies used for wastewater treatment through the destruction of the total organic content of toxic contaminants, including food dyes. Studies have shown that the introduction of catalysts in AOPs improve treatment efficiency (i.e., complete decomposition without secondary contamination). The present review offers a quick reference for researchers, regarding the treatment of wastewater containing food dyes and the different types of AOPs, with different catalyst and nanocatalyst materials obtained from traditional and green chemical syntheses.

Lanthanum-Zinc Binary Oxide Nanocomposite with Promising Heterogeneous Catalysis Performance for the Active Conversion of 4-Nitrophenol into 4-Aminophenol

This work intended to enhance the unique and outstanding properties of lanthanum by synthesizing its nanocomposite. A lanthanum-based nanocomposite was prepared by a simple and cost-effective “co-precipitation” method. Lanthanum nitrate (La (NO3)3) and zinc nitrate (Zn (NO3)2) were used as precursors. The lanthanum/zinc oxide nano composite formed was then calcined at 450 °C for 4 h in order to obtain a fine powder with size in the nano range of 1–100 nm. Characterization of the prepared catalyst was done by ultraviolet/visible spectroscopy, Fourier transform infrared spectroscopy, and photoluminescence. Crystallinity and morphology were found by X-ray diffraction and scanning electron microscopy. The synthesized nanocomposite material was also tested for heterogeneous catalytic applications of 4-nitrophenol (4-NP) reduction into 4-aminophenol (4-AP). It was found to be successful in complete reduction of 4-NP with enhanced catalytic performance.

Ultrasonic preparation and nanosheets supported binary metal oxide nanocomposite for the effective application towards the electrochemical sensor

Binary metal oxides (La₂O₃@SnO₂) decorated reduced graphene oxide nanocomposite was synthesized by ultrasound process in an environmentally benign solvent with a working frequency of 25 and 40 kHz (6.5 l200 H, Dakshin, India and maximum input power 210 W). Further, to enhance the electrocatalytic activity, the reduced graphene oxide (rGO) was prepared from graphene oxide by ultrasonication method. As prepared La₂O₃@SnO₂/rGO was scrutinized using XRD, TEM, EDX and quantitative test for the structural and morphology properties. As modified La₂O₃@SnO₂/rGO nanocomposite exhibits better electrochemical activity towards the oxidation of methyl nicotinate with higher anodic current compared to other modified and unmodified electrode for the detection of methyl nicotinate with larger linear range (0.035-522.9 µM) and lower limit of detection (0.0197 µM). In addition, the practical feasibility of the sensor was inspected with biological samples, reveals the acceptable recovery of the sensor in real samples.