Ultrasonic-assisted degradation of a triarylmethane dye using combined peroxydisulfate and MOF-2 catalyst: Synergistic effect and role of oxidative species

Advances and challenges in the removal of organic pollutants via sulfate radical-based advanced oxidation processes by Fe-based metal-organic frameworks: A review

Organic contaminants, notorious for their complexity and resistance to degradation, are prevalent in aquatic environments, posing severe threats to ecosystems. Sulfate radical-based advanced oxidation processes (SR-AOPs), known for their stability and high effectiveness, have become a common choice for treating organic wastewater. Metal-organic framework materials (MOFs) have garnered substantial attention due to their facile chemical manipulation, unique structural configurations, and other favorable properties. Therefore, this article critically reviews recent advances in research involving the utilization of Fe-based MOFs (Fe-MOFs) and their derivatives in SR-AOPs. Specifically, it highlights the manipulation of influencing factors within the system to enhance the degradation of organic pollutants. The mechanisms and applications underlying the degradation of organic pollutants in the SR-AOPs system are also elucidated.

Synergistic degradation of Congo Red by hybrid advanced oxidation via ultraviolet light, persulfate, and hydrodynamic cavitation

In the present study, hybrid activation of sodium peroxydisulfate (PS) by hydrodynamic cavitation and ultraviolet radiation was investigated for Congo Red (CR) degradation. Experiments were conducted using the Box-Benken design on inlet pressure (2-6 bar), PS concentration (0-50 mg. L-1) and UV radiation power (0-32 W). According to the results, at the optimum point where the pressure, PS concentration and UV radiation power were equal to 4.5 bar, 30 mg. L-1 and 16 W respectively, 92.01% of decolorization was achieved. Among the investigated processes, HC/UV/PS was the best process with the rate constant and synergetic coefficient of 38.6 × 10-3 min-1 and 2.76, respectively. At the optimum conditions, increasing the pollutant concentration from 20 mg. L-1 to 80 mg. L-1 decrease degradation rate from 92.01 to 45.21. Presence of natural organic mater (NOM) in all concentrations inhibited the CR degradation. Quenching experiments revealed that in the HC/UV/PS hybrid AOP free radicals accounted for 63.4% of the CR degradation, while the contribution of sulfate (SRs) and hydroxyl radicals (HRs) was 53.1% and 46.9%, respectively.

Sonoactivated Nanomaterials: A potent armament for wastewater treatment

The world is currently facing a critical issue of water pollution, with wastewater being a major contributor. It comes from different types of pollutants, including industrial, medical, agricultural, and domestic. Effective treatment of wastewater requires efficient degradation of pollutants and carcinogens prior to discharge. Commonly used methods for wastewater treatment include filtration, adsorption, biodegradation, advanced oxidation processes, and Fenton oxidation, among others.The sonochemical effect refers to the decomposition, oxidation, reduction, and other reactions of pollutant molecules in wastewater upon ultrasound activation, achieving pollutants removal. Furthermore, the micro-flow effect generated by ultrasonic waves creates tiny bubbles and eddies. This significantly increases the contact area and exchange speed of pollutants and dissolved oxygen, thereby accelerating pollutant degradation. Currently, ultrasonic-assisted technology has emerged as a promising approach due to its strong oxidation ability, simple and cheap equipments, and minimal secondary pollution. However, the use of ultrasound in wastewater treatment has some limitations, such as high energy consumption, lengthy treatment time, limited water treatment capacity, stringent water quality requirements, and unstable treatment effects. To address these issues, the combination of enhanced ultrasound with nanotechnology is proposed and has shown great potential in wastewater treatment. Such a combination can greatly improve the efficiency of ultrasonic oxidation, resulting in an improved performance of wastewater purification. This article presents recent progress in the development of sonoactivated nanomaterials for enhanced wastewater disposal. Such nanomaterials are systematically classified and discussed. Potential challenges and future prospects of this emerging technology are also highlighted.

Sulfate Radical-Based Degradation of Organic Pollutants: A Review on Application of Metal-Organic Frameworks as Catalysts

The degradation of organic pollutants present in domestic and industrial effluents is a matter of concern because of their high persistence and ecotoxicity. Recently, advanced oxidation processes (AOPs) are being emphasized for organic pollutant removal from effluents, as they have shown higher degradation efficiencies when compared to conventional activated sludge processes. Sulfate radical-based methods are some of the AOPs, mainly carried out using persulfate (PS) and peroxymonosulfate (PMS), which have gained attention due to the ease of sulfate radical generation and the effective degradation of organic molecules. PMS is gaining more popularity because of its high reactivity and ability to generate excess sulfate radicals. PMS has been the major focus; therefore, its mechanism has been explained, and limitations have been elaborated. The involvement of metal-organic frameworks for PMS/PS activation applied to organic pollutant removal and recent advances in the application of biochar and hydrogel-assisted metal-organic frameworks have been discussed.

Degradation of tetracyclines via calcium peroxide activation by ultrasonic: Roles of reactive species, oxidation mechanism and toxicity evaluation

Tetracyclines (TC) frequently detected in the aqueous environment pose threats to humans and ecosystems. The synergistic technology coupling ultrasound (US) and calcium peroxide (CaO₂) has a great potential to abate TC in wastewater. However, the degradation efficiency and detailed mechanism of TC removal in the US/CaO₂ system is unclear. This work was carried out to assess the performance and mechanism of TC removal in the US/CaO₂ system. The results demonstrated that 99.2% of TC was degraded by the combination of 15 mM CaO₂ with ultrasonic power of 400 W (20 kHz), but only about 30% and 4.5% of TC was removed by CaO₂ (15 mM) or US (400 W) alone process, respectively. Experiments using specific quenchers and electron paramagnetic resonance (EPR) analysis indicated that the generation of hydroxyl radicals (•OH), superoxide radicals (O₂^-•), and single oxygen (¹O₂) in the process, whereas •OH and ¹O₂ were mainly responsible for the degradation of TC. The removal of TC in the US/CaO₂ system has a close relationship with the ultrasonic power, the dosage of CaO₂ and TC, and the initial pH. The degradation pathway of TC in the US/CaO₂ process was proposed based on the detected oxidation products, and it mainly included N,N-dedimethylation, hydroxylation, and ring-opening reactions. The presence of 10 mM common inorganic anions including chloridion (Cl^-), nitrate ion (NO₃^-), sulfate ion (SO₄^2-), and bicarbonate ion (HCO₃^-) showed negligible influences on the removal of TC in the US/CaO₂ system. The US/CaO₂ process could efficiently remove TC in real wastewater. Overall, this work firstly demonstrated that •OH and ¹O₂ mainly contributed to the removal of pollutants in the US/CaO₂ system, which was remarkable for understanding the mechanisms of CaO₂-based oxidation process and its future application.

State-of-the-Art on the Sulfate Radical-Advanced Oxidation Coupled with Nanomaterials: Biological and Environmental Applications

Sulfate radicals (SO₄^-·) play important biological roles in biomedical and environmental engineering, such as antimicrobial, antitumor, and disinfection. Compared with other common free radicals, it has the advantages of a longer half-life and higher oxidation potential, which could bring unexpected effects. These properties have prompted researchers to make great contributions to biology and environmental engineering by exploiting their properties. Peroxymonosulfate (PMS) and peroxydisulfate (PDS) are the main raw materials for SO₄^-· formation. Due to the remarkable progress in nanotechnology, a large number of nanomaterials have been explored that can efficiently activate PMS/PDS, which have been used to generate SO₄^-· for biological applications. Based on the superior properties and application potential of SO₄^-·, it is of great significance to review its chemical mechanism, biological effect, and application field. Therefore, in this review, we summarize the latest design of nanomaterials that can effectually activate PMS/PDS to create SO₄^-·, including metal-based nanomaterials, metal-free nanomaterials, and nanocomposites. Furthermore, we discuss the underlying mechanism of the activation of PMS/PDS using these nanomaterials and the application of SO₄^-· in the fields of environmental remediation and biomedicine, liberating the application potential of SO₄^-·. Finally, this review provides the existing problems and prospects of nanomaterials being used to generate SO₄^-· in the future, providing new ideas and possibilities for the development of biomedicine and environmental remediation.

One-pot synthesis of graphene hydrogel/M (M: Cu, Co, Ni) nanocomposites as cathodes for electrochemical removal of rifampicin from polluted water

Nowadays, the removal of pharmaceutical contaminants from water resources and wastewater is of great importance due to environmental and health issues. Over the decades, various methods have been reported to remove pollutants from wastewater. Among the developed methods, advanced oxidation processes (AOPs) have received significant attention from researchers. In this study, we report the one-pot synthesis of graphene hydrogel-metal (GH-M, M: Co, Ni, Cu) nanocomposites via the combination of polyol and hydrothermal methods. The structure of the resulting nanocomposites was examined by transmission electron microscopy (TEM), inductively coupled plasma-mass spectroscopy (ICP-MS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and Raman spectroscopy methods. Afterward, as-prepared GH-Cu, GH-Co, and GH-Ni nanocomposites were used to prepare cathodes for the electro-Fenton (EF) process to remove rifampicin (RIF) from polluted water. The effect of operational parameters, including current density (mA/cm²), initial pH, initial RIF concentration (mg/L), and process time (min) was investigated via response surface methodology (RSM). The optimal values for current density, pH, initial RIF concentration, and process time using GH-Ni as cathode were 30 mA/cm², 5, 30 mg/L, and 90 min, respectively. The results at optimal values showed that the maximum RIF removal efficiency for GH-Cu, GH-Co, and GH-Ni cathodes was 90.47, 92.60, and 93.69%, respectively. Brunauer Emmett Teller (BET), atomic force microscopy (AFM), energy-dispersive X-ray (EDX), and cyclic voltammetry (CV) analyses were performed to investigate the performance of the cathodes for the RIF removal. Finally, total organic carbon (TOC), gas chromatography-mass spectrometry (GC-MS), and atomic absorption spectroscopy (AAS) analyses were performed for further investigation of the RIF removal from polluted water. The results claimed that one-pot synthesized GH-M cathodes can effectively remove RIF from polluted water through EF process.

Metal organic frameworks as advanced functional materials for aptasensor design

BACKGROUND

Advancement in coordination chemistry has achieved an impressive development of metal organic frameworks (MOFs) as the supramolecular hybrid materials, comprising harmonized metal nodes with organic ligands. Scope and approach: MOFs offer the unique properties of easy synthesis, nanoscale structure, adjustable size and morphology, high porosity, large surface area, supreme chemical tunability and stability, and biocompatibility. The features provide an exceptional opportunity for the widely usage of MOFs in the different scientific fields, e.g. biomedicine, electrocatalysis, food safety, energy storage, environmental surveillance, and biosensing platforms. The synergistic incorporation of the aptamer advantages and the superiorities of MOFs attains the novel MOF-based aptasensors. The excellent selectivity and sensitivity of the MOF-based aptasensors nominate them as efficient lab-on-chip tools for cost-effective, label-free, portable, and real-time monitoring of diverse targets.

KEY FINDINGS AND CONCLUSIONS

Here, we review the achievements in the sensor design by cooperation of MOF motifs and aptamers with the conspicuous potential of determining the targets. Finally, some results are expressed that provide a valuable viewpoint for developing the novel MOF-based test strips in the future.

In Situ Formation of Copper Phosphate on Hydroxyapatite for Wastewater Treatment

Here, we control the surface activity of hydroxyapatite (HAp) in wastewater treatment which undergoes peroxodisulfate (PDS) activation. Loading the catalytically active Cu species on HAp forms a copper phosphate in the outer layer of HAp. This modification turns a low active HAp into a high catalytically active catalyst in the dye degradation process. The optimal operational conditions were established to be [Cu–THAp]₀ = 1 g/L, [RhB]₀ = 20 mg/L, [PDS]₀ = 7.5 mmol/L, and pH = 3. The experiments indicate that the simultaneous presence of Cu-THAp and PDS synergistically affect the degradation process. Additionally, chemical and structural characterizations proved the stability and effectiveness of Cu-THAp. Therefore, this work introduces a simple approach to water purification through green and sustainable HAp-based materials.

Dimensional Optimization for ZnO-Based Mechano-ATRP with Extraordinary Activity

Various piezoelectric nanomaterials were utilized in ultrasound-mediated atom transfer radical polymerization (ATRP), owing to their outstanding piezoelectric effect. However, the relationship between the morphology of those piezocatalysts and polymerization has not been clearly established. Herein, we employed different piezoelectric zinc oxide (ZnO) nanomaterials to achieve novel mechano-induced ATRP (mechano-ATRP). Based on the synergistic effect of piezoelectric properties and specific surface area, the catalytic activity of 1D ZnO nanorods (1D-ZnO NRs) with increased aspect ratio outperformed that of 0D ZnO nanoparticles (0D-ZnO NPs). Compared to the conventional ATRP system, this system exhibited extraordinary activity toward the less activated monomer acrylonitrile (67% conversion after 6 h), with a narrow molecular weight distribution (polydispersity index ∼ 1.19). Furthermore, implications of ZnO loading, copper salt amount, degree of polymerization, monomer, and solvent were also studied for the highly efficient mechano-ATRP.

State of the art on the ultrasonic-assisted removal of environmental pollutants using metal-organic frameworks

The environmental and health issues of drinking water and effluents released into nature are among the major area of contention in the past few decades. With the growth of ultrasound-based approaches in water and wastewater treatment, promising materials have also been considered to employ their advantages. Metal-organic frameworks (MOFs) are among the porous materials that have received great attention from researchers in recent years. Features such as high porosity, large specific surface area, electronic properties like semi-conductivity, and the capacity to coordinate with the organic matter have resulted in a substantial increase in scientific researches. This work deals with a comprehensive review of the application of MOFs for ultrasonic-assisted pollutant removal from wastewater. In this regard, after considering features and synthesis methods of MOFs, the mechanisms of several ultrasound-based approaches including sonocatalysis, sonophotocatalysis, and sono-adsorption are well assessed for removal of different organic compounds by MOFs. These methods are compared with some other water treatment processes with the application of MOFs in the absence of ultrasound. Also, the main concern about MOFs including environmental hazards and water stability is fully discussed and some techniques are proposed to reduce hazardous effects of MOFs and improve stability in humid/aqueous environments. Economic aspects for the preparation of MOFs are evaluated and cost estimates for ultrasonic-assisted AOP approaches were provided. Finally, the future outlooks and the new frontiers of ultrasonic-assisted methods with the help of MOFs in global environmental pollutant removal are presented.

Recent advances in Ponceau dyes monitoring as food colorant substances by electrochemical sensors and developed procedures for their removal from real samples

Ponceau dyes are one of the food coloring materials that are added to various pharmaceutical, health and food products and give them an appearance. These dyes contain contaminants such as Benzidine, 4-Aminobiphenyl, and 4-Aminoazobenzene that are safe in small amounts, but they are not approved by the US Food and Drug Administration (US-FDA) for human consumption. This study comprehensively was reviewed the properties, applications, chemistry, and toxicity of Ponceau dyes as food colorant substances. Electroanalysis of Ponceau dyes was discussed in detail, and the various electrochemical sensors used to detect and monitor these dyes as food colorant were examined. The applied methods of removing and degradation of these dyes in municipal and industrial wastes were also discussed. Conclusions and future perspectives to motivate future research were also explored.

Photodegradation of Carbol Fuchsin Dye Using an Fe2−xCuxZr2−xWxO7 Photocatalyst under Visible-Light Irradiation

Fe2−xCuxZr2−xWxO7 (x: 0, 0.05, 0.015) nanoparticles were synthesized following the Pechini method and characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), and diffuse reflectance spectroscopy (DRS) measurements to be used as photocatalysts in colored water remediation. All of the prepared materials were crystallized in a cubic fluorite phase as the major phase. The band gap was reduced upon doping with W6+ and Cu2+ from 1.96 eV to 1.47 eV for Fe1.85Cu0.15Zr1.85W0.15O7. Carbol fuchsin (CF) dye was used to determine the photocatalytic degradation efficiency of the prepared catalysts. Degradation efficiency was directly proportional to the dopant’s concentration. Complete removal of 20 mg/L CF was achieved under optimal conditions (pH 9, and catalyst loading of 1.5 g/L) using Fe1.85Cu0.15Zr1.85W0.15O7. The degradation rate followed pseudo-first-order kinetics. The reusability for photocatalysts was tested five times, decreasing its efficiency by 4% after the fifth cycle, which indicates that the prepared Fe1.85Cu0.15Zr1.85W0.15O7 photocatalyst is a promising novel photocatalyst due to its superior efficiency in dye photodegradation.

Oxidative Synthesis of Acid Blue 7 Dye Catalyzed by CuO/Silicotungstic Acid in Water-Phase

A catalytic oxidation reaction for Acid Blue 7 dye synthesis was evaluated in water. Without lead oxide or manganese oxide derivatives as oxidants, polyoxometalate catalysts were investigated to reduce the usage of harmful heavy metal. A catalyst was prepared by mixing silicotungstic acid with copper oxide, and aqueous hydrogen peroxide (30%) was used as an oxidizing agent. This reaction proceeded to produce Acid Blue 7 from the corresponding leuco acid after 45 min at 95 °C and was viable for a 10 g-scale synthesis.

Application of advanced materials in sonophotocatalytic processes for the remediation of environmental pollutants

Significant advances in various industrial processes have resulted in the discharge of toxic pollutants into the environment. Consequently, it is essential to develop efficient wastewater treatment processes to reduce water contamination and increase recycling/reuse. Photocatalytic degradation is considered as an efficient method for the degradation of toxic pollutants in industrial wastewater. However, the use of photocatalytic approaches is associated with numerous limitations, such as lengthy procedures and the necessity for large amounts of catalysts. Hence, it has been proposed that photocatalysis could be combined with other techniques, including sonolysis, electrochemical, photothermal, microwave, ultrafiltration, and biological reactor. The integration of photocatalysis with sonolysis could be remarkably beneficial for environmental remediation. The combination of these processes has the advantages of using uniformly dispersed catalysts, regeneration of the catalyst surface, improved mass transfer, enhanced surface area due to smaller catalyst particles, and production of more active radicals for the degradation of organic pollutants. In this review, an overview on employing sonophotocatalysis for the removal of toxic organic contaminants from aqueous environments is provided. Additionally, the limitations of photocatalysis alone and the fundamental sonophotocatalytic mechanistic pathways are discussed. The importance of utilizing advanced two-dimensional (2D) semiconductor materials in sonophotocatalysis and the common synthetic approaches for the preparation of 2D materials are also highlighted. Lastly, the review provides comprehensive insights into different materials based on metal oxides, chalcogenides, graphene, and metal organic frameworks (MOFs), which are involved in sonophotocatalytic processes employed for the remediation of environmental pollutants.

Ultrasound-engineered synthesis of WS2@CeO2 heterostructure for sonocatalytic degradation of tylosin

The main aim of the present investigation was the intercalation of WS₂ nanosheets in the structure of ceria (CeO₂) to be used for the efficient catalytic destruction of tylosin (TYL) as a macrolide antibiotic in water. As-synthesized heterostructured catalyst was placed in a sono-reactor (40 kHz and 300 W) in order to degrade TYL through the sonocatalysis. 15 wt% WS₂/CeO₂ was chosen for performing the systematic experiments. Decreasing the concentration of TYL, along with increasing the WS₂/CeO₂ dosage led to reduced degradation efficiency. The water hardness was demonstrated to be a suppressive agent on the sonocatalysis of the target pollutant. As-generated holes, OH, and also O₂^- were responsible for the degradation of TYL. Increasing the ultrasound power and operating temperature enhanced the degradation efficiency. The degradation rate boosted up when the temperature was raised from 10 °C (0.0107 1/min) to 40 °C (0.0165 1/min). Moreover, the lowest activation energy (E_a) for sonocatalytic degradation was obtained as 10.81 kJ/mol. The sonocatalytic activity of WS₂/CeO₂ in the sono-reactor encountered insignificant change within five consecutive operational runs (~15% reduction). The mechanism and pathways of the sonocatalytic decomposition of TYL are also proposed.

Ultrasonic degradation of nitrosodipropylamine (NDPA) and nitrosodibutylamine (NDBA) in water

Nitrosodipropylamine (NDPA) and nitrosodibutylamine (NDBA), two highly toxics and carcinogenic disinfection by-products, cannot be efficiently removed by conventional water treatment processes, while the ultrasound treatment was developed as a promising alternative. In this work, nitrosodipropylamine (NDPA) and nitrosodibutylamine (NDBA) are degraded by ultrasound treatment. Greater than 99% of NDPA and NDBA mixing solution could be decomposed within 60 min at neutral pH under optimal ultrasound power and frequency settings of 100 W and 600 kHz, respectively. Free radical reactions (OH•) played a significant role and the reaction sites were predominately at the bubble interface. The degradation of both NDPA and NDBA exhibited pseudo-first-order degradation kinetics, and the rate constant k_app was influenced by a number of factors including ultrasonic frequency, power, initial concentration, initial pH, various anions and cations frequently present in drinking water, hydroxyl radical scavengers, and water matrices, especially the promoting effect of various anions and cations and water matrices. The results of this study suggest the potential for ultrasound treatment as a method for removing NAms from water.