Preparation of cationic poly(ionic liquids) functionalization of silica nanoparticles via multicomponent condensation reaction with significant enhancement of adsorption capacity

Preparation of Anisotropic Trimeric Poly(Ionic Liquid) Microspheres via Microwave-Assisted Dual-Crosslinked Seed Emulsion Polymerization

A microwave-assisted dual-crosslinked seed emulsion polymerization method is reported to prepare anisotropic trimeric poly(ionic liquid) (PIL) microspheres. First, ethylene glycol dimethacrylate (EGDMA)-crosslinked PIL (CPIL) seed microspheres are prepared. Then, the CPIL microspheres are swollen with ionic liquid (IL) emulsion containing divinylbenzene (DVB) and polymerized to form dual-crosslinked PIL (D-CPIL) microspheres under microwave irradiation. Finally, the D-CPIL microspheres are swollen with IL monomer emulsion to form trimeric morphology and polymerized to obtain trimeric PIL microspheres under microwave irradiation. The formation process of trimeric PIL microspheres is tracked using an optical microscope and their morphology is observed using scanning electron microscopy. Different from the repeat-swelling seed emulsion polymerization that needs dumbbell-like seed microspheres having gradient crosslinking or gradient surface wettability, this method depends on multiple local contraction forces in D-CPIL microspheres containing lowly crosslinked core and highlycrosslinked shell during swelling to form trimeric PIL microspheres. It is found that microwave polymerization is important because it can well retain trimeric morphology compared to conventional heating polymerization in oil or water baths. The morphology of trimeric PIL microspheres can be adjusted by changing the type and amount of crosslinkers, monomer/seed microsphere ratio, initiator dosage, temperature, etc.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Ionic liquid based composites: A versatile materials for remediation of aqueous environmental contaminants

Water pollution is one of the most aggravated problems threatening the sustainability of human race and other life forms due to the rapid pace of civilization and industrialization. A long history exists of release of hazardous pollutants into the water bodies due to selfish human activities since the Industrial Revolution, but no effort has been completely successful in curbing the activities that result in the degradation of our environment. These pollutants are harmful, carcinogenic and have adverse health effects to all forms of life. Thus, remarkable efforts have been geared up to obtain clean water by exploiting science and technology. The application of Ionic liquids (ILs) as sustainable materials have received widespread attention since the last decade. Their interesting properties, simplicity in operation and satisfactory binding capacities in elimination of the contaminants makes them a valuable prospect to be utilized in wastewater treatment. Immobilizing and grafting the solid supports with ILs have fetched efficient results to exploit their potential in the adsorptive removal processes. This review provides an understanding of the recent developments and outlines the possible utility of IL based nano adsorbents in the removal of organic compounds, dyes and heavy metal ions from aqueous medium. Effect of several parameters such as sorbent dosage, pH and temperature on the removal efficiency has also been discussed. Moreover, the adsorption isotherms, thermodynamics and mechanism are comprehensively studied. It is envisioned that the literature gathered in this article will guide the budding scientists to put their interest in this area of research in the days to come.

Formulation and Biological Evaluation of Mesoporous Silica Nanoparticles Loaded with Combinations of Sortase A Inhibitors and Antimicrobial Peptides

This study aimed to develop synergistic therapies to treat superbug infections through the encapsulation of sortase A inhibitors (SrtAIs; trans-chalcone (TC), curcumin (CUR), quercetin (QC), or berberine chloride (BR)) into MCM-41 mesoporous silica nanoparticles (MSNs) or a phosphonate-modified analogue (MCM-41-PO₃⁻) to overcome their poor aqueous solubility. A resazurin-modified minimum inhibitory concentration (MIC) and checkerboard assays, to measure SrtAI synergy in combination with leading antimicrobial peptides (AMPs; pexiganan (PEX), indolicidin (INDO), and [I5, R8] mastoparan (MASTO)), were determined against methicillin-sensitive (MSSA) and methicillin-resistant (MRSA) Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The results demonstrated that the MCM-41 and MCM-41-PO₃⁻ formulations significantly improved the aqueous solubility of each SrtAI. The MICs for SrtAI/MCM-41-PO₃⁻ formulations were lower compared to the SrtAI/MCM-41 formulations against tested bacterial strains, except for the cases of BR/MCM-41 and QC/MCM-41 against P. aeruginosa. Furthermore, the following combinations demonstrated synergy: PEX with TC/MCM-41 (against all strains) or TC/MCM-41-PO₃⁻ (against all strains except P. aeruginosa); PEX with BR/MCM-41 or BR/MCM-41-PO₃⁻ (against MSSA and MRSA); INDO with QC/MCM-41 or QC/MCM-41-PO₃⁻ (against MRSA); and MASTO with CUR/MCM-41 (against E. coli). These combinations also reduced each components’ toxicity against human embryonic kidney cells. In conclusion, MCM-41 MSNs provide a platform to enhance SrtAI solubility and demonstrated antimicrobial synergy with AMPs and reduced toxicity, providing novel superbug treatment opportunities.

Construction of ionic liquid functionalized MXene with extremely high adsorption capacity towards iodine via the combination of mussel-inspired chemistry and Michael addition reaction

In this work, a highly efficient adsorbent based on ionic liquid functionalized MXene has been fabricated through the combination of mussel-inspired chemistry and Michael addition reaction. The surface of MXene was first coated with polydopamine (PDA) through self-polymerization of dopamine and the amino groups were introduced on the surface of MXene simultaneously. After that, the ene bond-containing ionic liquid was further immobilized on the surface of MXene-PDA to obtain MXene-PDA-IL. As a concept, the adsorptive removal of iodine using MXene-PDA-IL was conducted and the effects of various factors on the adsorption behavior were examined. The experimental data were analyzed by intermittent adsorption experiments, the adsorption kinetics, adsorption isotherm, adsorption thermodynamics, and cyclic adsorption experiments. We found that the adsorption procedure could reach equilibrium within 10 min after mixing adsorbent and iodine. The maximum adsorption capacity of MXene-PDA-IL towards iodine was as high as 695.4 mg g^-1, which is greater than most of reported adsorbents. Considered the advantages of mussel-inspired chemistry for surface functionalization and the adsorption capacity of ionic liquids, the method could be used for construct a number of composites with potential for adsorption applications.

Recent Advances on Fabrication of Polymeric Composites Based on Multicomponent Reactions for Bioimaging and Environmental Pollutant Removal

As the core of polymer chemistry, manufacture of functional polymers is one of research hotspots over the past several decades. Various polymers are developed for diverse applications due to their tunable structures and unique properties. However, traditional step-by-step preparation strategies inevitably involve some problems, such as separation, purification, and time-consuming. The multicomponent reactions (MCRs) are emerging as environmentally benign synthetic strategies to construct multifunctional polymers or composites with pendant groups and designed structures because of their features, such as efficient, fast, green, and atom economy. This mini review summarizes the latest advances about fabrication of multifunctional fluorescent polymers or adsorptive polymeric composites through different MCRs, including Kabachnik-Fields reaction, Biginelli reaction, mercaptoacetic acid locking imine reaction, Debus-Radziszewski reaction, and Mannich reaction. The potential applications of these polymeric composites in biomedical and environmental remediation are also highlighted. It is expected that this mini-review will promote the development preparation and applications of functional polymers through MCRs.

The influence of the polymerization approach on the catalytic performance of novel porous poly (ionic liquid)s for green synthesis of pharmaceutical spiro-4-thiazolidinones

Although poly (ionic liquids) (PILs) have attracted great research interest owing to their various applications, the performance of nanoporous PILs has been rarely developed in the catalysis field. To this end, a micro–mesoporous PIL with acid–base bifunctional active sites was designed and fabricated by two different polymerization protocols including hydrothermal and classical precipitation polymerization in this paper. Based on our observations, hydrothermal conditions (high temperature and pressure) enabled the proposed sonocatalyst to possess a great porous structure with a high specific surface area (S_BET: 315 m² g⁻¹) and thermal stability (around 450 °C for 45% weight loss) through strengthening cross-linking. In a comparative study, the preferred nanoporous PIL was selected and utilized as the sonocatalyst in a multicomponent reaction of isatins, primary amines, and thioglycolic acid. In the following, a variety of new and known pharmaceutical spiro-4-thiazolidinone derivatives were synthesized at room temperature and obtained excellent yields (>90%) within short reaction times (4–12 min) owing to the substantial synergistic effect between ultrasound irradiation and magnetically separable catalyst.

Sustainable synthesize of a new mesoporous poly (ionic liquid) as acid–base bifunctional catalyst for environmental being preparation of monospiro derivatives has been developed.