Facile and inexpensive synthesis of Ag doped ZnO/CNTs composite: Study on the efficient photocatalytic activity and photocatalytic mechanism

Morinda citrifolia fruit extract-mediated synthesis of ZnO and Ag/ZnO nanoparticles for photocatalytic degradation of tetracycline

Bio-mediated synthesis of zinc oxide (ZnO) nanoparticles using plant extracts has been paid attention but still remains several challenges, e.g., alkaline addition during biosynthesis and photocatalytic effectiveness. Here, ZnO and silver (Ag)-doped ZnO at different ratios (0.5%, 1%, 3%, 5%, and 7%) were synthesized by an alkali-free method using Morinda citrifolia fruit extract. These materials were used as efficient photocatalysts for the tetracycline hydrochloride degradation. The impact of factors such as synthesis condition, Ag doping, pH, concentration, catalyst dosage, coexisting ions, and different light sources on the photocatalytic performance of green ZnO and Ag/ZnO nanoparticles was studied. The Ag-1%/ZnO composite exhibited the highest photocatalytic activity. The chief mechanisms involved in the photocatalytic process of Ag-doped ZnO nanoparticles were insightfully clarified through electrochemical and scavenging analyses. Active species including •O2-, h+, and e- played a vital role in the tetracycline hydrochloride degradation mechanism. Moreover, Ag-1%/ZnO represented four cycles with a minor decrease in degradation efficiency from 84% to 79% from the 1st to the 4th cycle. Morinda citrifolia fruit extract-mediated Ag/ZnO nanoparticles is suggested as an effective and recyclable photocatalyst in the tetracycline antibiotic treatment.

A Multifunctional Nanoplatform Based on Carbon Nanotubes Loaded with Persistent Luminescent Nanoparticles for Photocatalysis, Photothermal Therapy, and Drug Delivery Applications

Persistent luminescent nanoparticles (PLNPs) exhibit ultralong afterglow properties due to their excellent light storage mechanism and great potential for biomedical, energy, and environmental applications. However, PLNPs have certain limitations regarding photogenerated carrier separation efficiency, light absorption range, and specific surface area, which limit their efficiency and performance in practical applications. Herein, we reported a multifunctional nanoplatform based on carbon nanotubes (CNTs) loaded with PLNPs (ZnGa1.97O4:Cr0.01, Bi0.02, ZGO). Experimental characterizations and density functional theory calculations showed that the combination of PLNPs with CNTs significantly reduced the recombination efficiency of photogenerated carriers in PLNPs, increased the specific surface area, and enhanced light absorption intensity in the near-infrared (NIR) region. By optimizing the ratio, ZGO-10CNTs not only exhibited the greatest photocatalytic activity for pollutant degradation but also showed excellent photocatalytic efficiency in generating reactive oxygen species, demonstrating their potential for photocatalytic therapy applications. In addition, ZGO-10CNTs demonstrated excellent NIR photothermal conversion and pH-responsive drug release. The integration of PLNPs with CNTs led to the development of a multifunctional nanoplatform with capabilities in photocatalytic degradation, photocatalytic therapy, photothermal therapy, and drug delivery, thus expanding the design of multifunctional nanoplatforms based on PLNPs. The construction of this multifunctional nanoplatform provides new strategies for cancer therapy and opens up new perspectives for applications in the energy and environmental fields.

Effect of crystallite size reduction and widening of optical phonon vibration due to AC variation on ZnO/Mg composites in implementation of methylene blue degradation

The fashion industry's reliance on dyes contributes significantly to environmental pollution, which disturbs the ecological balance. To address this issue, we used ZnO/Mg combined with activated carbon (AC) at various concentrations (0.1 g, 0.5 g, and 1 g), which were synthesized via sol-gel and mechanical alloying processes. The analysis of X-ray diffraction shows reduced crystallite size, with d-spacing change ( → d ← ) for ZnO/Mg/AC (0.5 g) and ( ← d → ) for ZnO/Mg/AC (1 g), respectively. The results of the IR spectrum indicated the main vibrations is MgO and Zn-O bonds at wave numbers 673 cm-1 and 467 cm-1. It was found that ZnO/Mg/AC (1 g) shows high degradation performance D % : 86.15% as a consequence of reduced crystallite size: 22.67 nm, decreased skin depth: 0.002 cm, widening of optical phonon vibration ( Δ ( LO - TO ) ): 252 cm-1 and increased E g : 4.6 eV as a function AC variation. Moreover, the finding of high photocatalytic performance ≥  80% for 0.25 mL MB dissolved in 250 mL distilled water is obtained from all composites. Based on these results, ZnO/Mg/AC shows potential as a photocatalyst to solve the MB waste problem.

Synthesis of Ag/CuS doped mineral magnetite nanocomposite with improved photocatalytic activity against tetracycline and diclofenac pollutants

The contamination of water sources by pharmaceutical pollutants presents significant environmental and health hazards, making the development of effective photocatalytic materials crucial for their removal. This research focuses on the synthesis of a novel Ag/CuS/Fe₃O₄ nanocomposite and its photocatalytic efficiency against tetracycline (TC) and diclofenac contaminants. The nanocomposite was created through a straightforward and scalable precipitation method, integrating silver nanoparticles (AgNPs) and copper sulfide (CuS) into a magnetite framework. Various analytical techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR),ultraviolet-visible spectrophotometry (UV-Vis) and energy-dispersive X-ray spectroscopy (EDS), were employed to characterize the structural and morphological properties of the synthesized material. The photocatalytic activity was tested by degrading tetracycline and diclofenac under visible light. Results indicated a marked improvement in the photocatalytic performance of the Ag/CuS/Fe₃O₄ nanocomposite (98%photodegradation of TC 60 ppm in 30 min) compared to both pure magnetite and CuS/Fe₃O₄. The enhanced photocatalytic efficiency is attributed to the synergistic interaction between AgNPs, CuS, and Fe3O4, which improves light absorption and charge separation, thereby increasing the generation of reactive oxygen species (ROS) and promoting the degradation of the pollutants. The rate constant k of photodegradation was about 0.1 min-1 for catalyst dosages 0.02 g. Also the effect of photocatalyst dose and concentration of TC and pH of solution was tested. The modified photocatalyst was also used for simultaneous photodegradation of TC and diclofenac successfully. This study highlights the potential of the Ag/CuS/Fe₃O₄ nanocomposite as an efficient and reusable photocatalyst for eliminating pharmaceutical pollutants from water.

Fabrication of a highly efficient CuO/ZnCo2O4/CNTs ternary composite for photocatalytic degradation of hazardous pollutants

In the current study, CuO, ZnCo2O4, CuO/ZnCo2O4, and CuO/ZnCo2O4/CNTs photocatalysts were prepared to remove crystal violet (CV) and colorless pollutants (diclofenac sodium and phenol) from wastewater. Herein, sol-gel and co-precipitation methods were used to synthesize CuO and ZnCo2O4, respectively. The sonication method was used to synthesize CuO/ZnCo2O4 and a CNTs-based composite (CuO/ZnCo2O4/CNTs). From the UV-Vis spectra of CuO, ZnCo2O4, CuO/ZnCo2O4, and CuO/ZnCo2O4/CNTs, the optical band gap value was calculated to be 2.11, 2.18, 1.71 and 1.63 eV respectively. The photocatalytic results revealed that CuO/ZnCo2O4/CNTs exhibited higher degradation of 87.7% against CV dye, 82% against diclofenac sodium, and 72% against phenol as compared to other prepared photocatalysts. The OH˙ radical is identified as the active species in the photocatalytic process over CuO/ZnCo2O4/CNTs. The impact of several parameters, such as pH, concentration, and catalyst dosage, has also been investigated. The better activity of the CNTs-based composite was due to the synergic effect of both CuO/ZnCo2O4 nanocomposite and carbon nanotubes. Therefore, the synthesized CuO/ZnCo2O4/CNTs photocatalyst has the potential to degrade organic wastewater effluents effectively.

Rapid photocatalytic dye degradation, enhanced antibacterial and antifungal activities of silver stacked zinc oxide garnished on carbon nanotubes

A composite of Zinc oxide loaded with 5-weight % silver decorated on carbon nanotubes (Ag-loaded ZnO: CNT) was synthesized using a simple refluxed chemical method. The influence of deviation in the weight % of carbon nanotube loading on photocatalytic dye degradation (methylene blue and rose bengal) and antibiotic (antimicrobial and antifungal) performance was investigated in this study. The light capture ability of Ag-loaded ZnO:CNT in the visible region was higher in photocatalytic activity than that of Ag-loaded ZnO and ZnO:CNT. The bandgap of the Ag-loaded ZnO: CNT was tuned owing to the surface plasmon resonance effect. The photocatalytic degradation investigations were optimized by varying the wt% in CNTs, pH of dye solution, concentration of the dye solution, and amount of catalytic dose. Around 100% photocatalytic efficiency in 2 min against MB dye was observed for Ag doped ZnO with 10 wt% CNT composite at pH 9, at a rate constant 1.48 min-1. Bipolaris sorokiniana fungus was first time tested against a composite material, which demonstrated optimum fungal inhibition efficiency of 48%. They were also tested against the bacterial strains Staphylococcus aureus, Bacillus cerius, Proteus vulgaris, and Salmonella typhimurium, which showed promising antibacterial activity compared to commercially available drugs. The composite of Ag doped ZnO with 5 wt% CNT has shown competitive zone inhibition efficacy of 21.66 ± 0.57, 15.66 ± 0.57, 13.66 ± 0.57 against bacterial strains Bacillus cerius, Proteus vulgaris, and Salmonella typhimurium which were tested for the first time against Ag-loaded ZnO:CNT.

Experimental and computational study of metal oxide nanoparticles for the photocatalytic degradation of organic pollutants: a review

Photocatalysis is a more proficient technique that involves the breakdown or decomposition of different organic contaminants, various dyes, and harmful viruses and fungi using UV or visible light solar spectrum. Metal oxides are considered promising candidate photocatalysts owing to their low cost, efficiency, simple fabricating method, sufficient availability, and environment-friendliness for photocatalytic applications. Among metal oxides, TiO2 is the most studied photocatalyst and is highly applied in wastewater treatment and hydrogen production. However, TiO2 is relatively active only under ultraviolet light due to its wide bandgap, which limits its applicability because the production of ultraviolet is expensive. At present, the discovery of a photocatalyst of suitable bandgap with visible light or modification of the existing photocatalyst is becoming very attractive for photocatalysis technology. However, the major drawbacks of photocatalysts are the high recombination rate of photogenerated electron-hole pairs, the ultraviolet light activity limitations, and low surface coverage. In this review, the most commonly used synthesis method for metal oxide nanoparticles, photocatalytic applications of metal oxides, and applications and toxicity of different dyes are comprehensively highlighted. In addition, the challenges in the photocatalytic applications of metal oxides, strategies to suppress these challenges, and metal oxide studied by density functional theory for photocatalytic applications are described in detail.

Dual function Mg-doped binary metal ferrite: Photocatalytic degradation of trichlorophenol, bactericidal activity and molecular docking analysis

A new Mg-doped Zn_0.5Ni_0.5Fe₂O₄ (Mg-FZN) photocatalyst was synthesised using a simple co-precipitation-doping technique to develop a dual-function material with the ability to degrade hazardous and refractory pollutants and inactivate bacterial strains. The characterization results revealed that Mg-FZN is an n-type semiconductor with a conduction band of -0.413 eV, an average pore width of 2.32 nm, and a crystal size of 31.45 nm. The photocatalytic activity of Mg-FZN was assessed based on the degradation of 2,4,5-trichlorophenol and achieved 83.8% degradation efficiency under optimised conditions. The radical quenching results revealed that h⁺ significantly contributed to the photodegradation process while ^•OH, and ^•O₂^- played key roles. Additionally, within 60 min, 25 mg of Mg-FZN had bactericidal effects on the bacteria E. coli and S. aureus in both the presence and absence of UV light. Mg-FZN showed H-bonding, electrostatic, and metal-contact interactions with the amino acid residues of the bacterial protein with high binding scores (-4.711 kcal/mol and -5.872 kcal/mol), according to molecular docking.

A high-performance SERS imprinted membrane based on Ag/CNTs for selective detection of spiramycin

In this test, the eggshell membrane (ESM) is selected as the support membrane for the biocompatibility and anchors CNTs on the surface to increase the mechanical properties. Then Ag NPs are decorated on CNTs-ESM substrate as SERS substrate by twice in-situ reduction. Finally, a layer of imprinted polymers is coated on the surface of the substrate to synthesize the imprinted membrane for selective detection of spiramycin. It is exhibited from the characteristic results that the CNTs significantly increase the mechanical properties and the detection sensitivity, simultaneously. When the concentration of SP changes between 10^-6 ∼ 10^-11 M, there is a linear relationship between SERS intensity and SP concentration. The detection limit is 10^-11 M, and the correlation coefficient R² is 0.9864. The SERS imprinted membrane can be applied into the detection of antibiotics in practical sample, which broadens the research field of antibiotics detection.

Development of Ag-Doped ZnO Thin Films and Thermoluminescence (TLD) Characteristics for Radiation Technology

This work examined the thermoluminescence dosimetry characteristics of Ag-doped ZnO thin films. The hydrothermal method was employed to synthesize Ag-doped ZnO thin films with variant molarity of Ag (0, 0.5, 1.0, 3.0, and 5.0 mol%). The structure, morphology, and optical characteristics were investigated using X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), photoluminescence (PL), and UV-vis spectrophotometers. The thermoluminescence characteristics were examined by exposing the samples to X-ray radiation. It was obtained that the highest TL intensity for Ag-doped ZnO thin films appeared to correspond to 0.5 mol% of Ag, when the films were exposed to X-ray radiation. The results further showed that the glow curve has a single peak at 240-325 °C, with its maximum at 270 °C, which corresponded to the heating rate of 5 °C/s. The results of the annealing procedures showed the best TL response was found at 400 °C and 30 min. The dose-response revealed a good linear up to 4 Gy. The proposed sensitivity was 1.8 times higher than the TLD 100 chips. The thermal fading was recorded at 8% for 1 Gy and 20% for 4 Gy in the first hour. After 45 days of irradiation, the signal loss was recorded at 32% and 40% for the cases of 1 Gy and 4 Gy, respectively. The obtained optical fading results confirmed that all samples' stored signals were affected by the exposure to sunlight, which decreased up to 70% after 6 h. This new dosimeter exhibits good properties for radiation measurement, given its overgrowth (in terms of the glow curve) within 30 s (similar to the TLD 100 case), simple annealing procedure, and high sensitivity (two times that of the TLD 100).

Ag/ZnO Thin Film Nanocomposite Membrane Prepared by Laser-Assisted Method for Catalytic Degradation of 4-Nitrophenol

Zinc oxide thin film (ZnO thin film) and a silver-doped zinc oxide nanocomposite thin film (Ag/ZnO thin film) were prepared by the technique of the pulsed laser deposition at 600 °C to be applicable as a portable catalytic material for the removal of 4-nitrophenol. The nanocomposite was prepared by making the deposition of the two targets (Zn and Ag), and it was analyzed by different techniques. According to the XRD pattern, the hexagonal wurtzite crystalline form of Ag-doped ZnO NPs suggested that the samples were polycrystalline. Additionally, the shifting of the diffraction peaks to the higher angles, which denotes that doping reduces the crystallite size, illustrated the typical effect of the dopant Ag nanostructure on the ZnO thin film, which has an ionic radius less than the host cation. From SEM images, Ag-doping drastically altered the morphological characteristics and reduced the aggregation. Additionally, its energy band gap decreased when Ag was incorporated. UV spectroscopy was then used to monitor the catalysis process, and Ag/ZnO thin films had a larger first-order rate constant of the catalytic reaction K than that of ZnO thin film. According to the catalytic experiment results, the Ag/ZnO thin film has remarkable potential for use in environmentally-favorable applications.

Functionalized Microbial Consortia with Silver-Doped Hydroxyapatite (Ag@HAp) Nanostructures for Removal of RO84 from Industrial Effluent

Considering that freshwater is a necessity for human life, sewage treatment has been a serious concern for an increasing number of scientists and academics in recent years. To clean industrial effluents, innovative catalysts with good adsorption, chemical stability, and physicochemical properties have been constructed. Here, a prospective microbial consortium was extracted from the wastewater and used as a low-cost catalyst that was functionalized with silver and silver-doped hydroxyapatite (Ag@HAp) nanostructures made using a sonochemical approach. The structural, optical, and crystal phases of Ag and Ag-doped hydroxyapatite (Ag@HAp) nanostructures were studied using ultraviolet-visible (UV-Vis), Fourier transfer infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM) techniques. The degradation action of functionalized microbial consortia was examined against reactive orange 84 (RO84) organic discharge. Excellent efficiency for the removal of industrial effluents was found for the Ag NPs and Ag-doped hydroxyapatite (Ag@HAp) loaded with microbial consortia. A maximum of 95% of the decolorization properties of the RO84 dye were obtained in the case of microbial consortia with Ag and Ag@HAp, which was better than the consortia alone (80.32% for 5 ppm and 69.54% for 20 ppm). The consortia/Ag showed 93.34% for 5 ppm and 85.43% for 20 ppm, while was higher for consortia/Ag@HAp (95.34 and 88.43%). The use of these surface-modified nanocatalysts for wastewater treatment and waste effluents discharged from laboratories, the chemical industry, and other sources could be expanded.

Enhanced Plasmon Based Ag and Au Nanosystems and Their Improved Biomedical Impacts

Numerous specialists and academics have backed the improved physicochemical characteristics of metal substrate (Ag, Au) based composite nanoparticles for a number of applications, including pharmaceuticals, optoelectronics, and environmental impact. Insights of Ag and Au NPs-based nanomaterials will be discussed, as well as important production, physicochemical, and biotechnological characteristics. The plasmon capacities of Ag and Au NPs, along with their customisable form, scale, and surface modification could be described by specified geometries and constituent contents. It was revealed that interaction dynamics of Ag and Au implanted nanomaterials with dopants/defects ratios seem to be more effective in stimulating pathogens by interrupting biochemical reactions. As a result, we focus on defect science in Ag and Au-based nanoscale materials, taking into account surface morphology, ionic packing, and chemical phase assessment. This chapter will cover the important optical, geometrical, and physicochemical features of Ag and Au nanomaterials, and their pharmacological significance.

2D Personality of Multifunctional Carbon Nitrides towards Enhanced Catalytic Performance in Energy Storage and Remediation

Numerous scholars in the scientific and management areas have been overly focused on contemporary breakthroughs in two-dimensional objects for multiple prospective applications. Photochemical and electrocatalytic functions of integrated circuits associated with multi-component tools have been enhanced by designing the macro- and microstructures of the building blocks. Therefore, the current research attempts to explore a larger spectrum of layered graphitic carbon nitrides (g-C3N4) and their derivatives as an efficient catalyst. By executing systematic manufacturing, optimization, and evaluation of its relevance towards astonishing energy storage devices, adsorption chemistry, and remediation, many researchers have focused on the coupling of such 2D carbon nitrides combined with suitable elementals. Hybrid carbon nitrides have been promoted as reliable 2D combinations for the enhanced electrophotocatalytic functionalities, proved by experimental observations and research outputs. By appreciating the modified structural, surface, and physicochemical characteristics of the carbon nitrides, we aim to report a systematic overview of the g-C3N4 materials for the application of energy storages and environments. It has altered energy band gap, thermal stability, remarkable dimensional texturing, and electrochemistry, and therefore detailed studies are highlighted by discussing the chemical architectures and atomic alternation of g-C3N4 (2D) structures.

Fabrication of Ag-doped ZnO/PAN composite nanofibers by electrospinning: Photocatalytic and antiviral activities

Ag-doped ZnO nanoparticles (AZNs) were directly synthesized using sol-gel method to embed into polyacrylonitrile (PAN) nanofibers by electrospinning. The synthesized AZNs were optically and structurally characterized by UV-VIS spectroscopy, photoluminescence spectroscopy, high resolution HR-TEM and XRD. The photocatalytic activity of the AZNs was examined by photocatalytic degradation of methylene blue to correlate with their antiviral efficacy in PAN nanofibers fabricated via electrospinning technique. The PAN nanofibers containing AZNs were characterized using SEM and EDS. Finally, antiviral activity of AZNs/PAN nanofibers was investigated by using virus ϕx174 under visible light irradiation. As a result, the antiviral efficacy of nanofibers increased as the concentration of Ag in AZNs increased. The results show that better antiviral efficacy was obtained in AZNs/PAN nanofibers prepared with AZNs of higher photocatalytic performance.

Ag@ZnO/MWCNT ternary nanocomposite as an active and stable catalyst for the 4-nitrophenol reduction in water

The nitroaromatic compounds, known as organic pollutants, have arising attention due to their carcinogenic character, highly dangerous to human health. In this work, the Ag@ZnO/MWCNT ternary nanocomposite synthesized via conjugation of sonochemical and solvothermal treatments manifests high performance in the reduction of 4-nitrophenol in the aqueous media (TOF value of 246 min^-1μmol metal^-1). The incorporation of MWCNT onto the nanocomposite structure favored the reusing of the catalysts even after eight consecutive catalytic runs without catalysts cleaning nor product removal. Obtained samples were characterized by XRD, TEM, UV-vis, Raman and FTIR spectroscopies. It was found that ultrasonic treatment at relatively moderate conditions leads to functionalization of MWCNT, the appearance of C=C and OH groups and change of electronic properties of Ag@ZnO/MWCNT composite which provide its stable material dispersion in aqueous solution and high catalytic performance in the 4-nitrophenol reduction. This technique may be effectively applied for the functionalization of carbon including materials for their usage in an aqueous media.