Isopentyltriphenylphosphonium bromideionic liquid as a newly effective corrosion inhibitor on metal-electrolyte interface in acidic medium: Experimental, surface morphological (SEM-EDX & AFM) and computational analysis

Surface adsorption and corrosion resistance performance of modified chitosan: Gravimetric, electrochemical, and computational studies

Two novel chitosan derivatives (water soluble and acid soluble) modified with thiocarbohydrazide were produced by a quick and easy technique using formaldehyde as links. The novel compounds were synthesized and then characterized by thermogravimetric analysis, elemental analysis, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and differential scanning calorimetry. Their surface morphologies were examined using scanning electron microscopy. These chitosan derivatives could produce pH-dependent gels. The behavior of mild steel in 5 % acetic acid, including both inhibitors at various concentrations, was investigated using gravimetric and electrochemical experiments. According to the early findings, both compounds (TCFACN and TCFWCN) functioned as mixed-type metal corrosion inhibitors. Both inhibitors showed their best corrosion inhibition efficiency at 80 mg L-1. TCFACN and TCFWCN, showed approximately 92 % and 94 % corrosion inhibition, respectively, at an optimal concentration of 80 mg L-1, according to electrochemical analysis. In the corrosion test, the water contact angle of the polished MS sample at 87.90 °C was reduced to 51 °C. The water contact angles for MS inhibited by TCFACN and TCFWCN in the same electrolyte were greater, measuring 78.10 °C and 93.10 °C, respectively. The theoretical results also support the experimental findings.

Adsorption and Inhibition Mechanisms of New Pyrazole Derivatives for Carbon Steel Corrosion in Hydrochloric Acid Solutions Based on Experimental, Computational, and Theoretical Calculations

The study aims to synthesize two green pyrazole compounds, N-((1H-pyrazol-1-yl)methyl)-4-nitroaniline (L4) and ethyl 5-methyl-1-(((4-nitrophenyl)amino)methyl)-1H-pyrazole-3-carboxylate (L6), and test their action as corrosion inhibitors for carbon steel (CS) in a 1 M HCl solution. Both chemical and electrochemical methods, namely, gravimetric measurements (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS), were used to assess the efficiency of the investigated molecules. DFT calculations at B3LYP/6-31++G (d, p) and molecular dynamics simulation were used to carry out quantum chemical calculations in order to link their electronic characteristics with the findings of experiments. The organic products exhibited good anticorrosion ability, with maximum inhibition efficiencies (IE %) of 91.8 and 90.8% for 10-3 M L6 and L4, respectively. In accordance with PDP outcomes, L6 and L4 inhibitors act as mixed-type inhibitors. Assessment of the temperature influence evinces that both L4 and L6 are chemisorbed on CS. The adsorption of L4 and L6 on CS appears to follow the Langmuir isotherm. Scanning electron microscopy and UV-visible disclose the constitution of a barrier layer, limiting the accessibility of corrosive species to the CS surface. Theoretical studies were performed to support the results derived from experimental techniques (WL, PDP, and EIS).

Experimental and theoretical studies of the efficiency of metal-organic frameworks (MOFs) in preventing aluminum corrosion in hydrochloric acid solution

Aluminum corrosion inhibitors "{[CuI (CN)2(phen) CuII (CN)2(phen)]5H2O},(MOF1) and {[CuI(CN)2(phen)CuII(CN)2(phen)]5H2O}@TiO2 (MOF1@TiO2) were studied in one molar HCl solution". The ML results for three different temperatures (25-45 °C) were compared with the results of PDP and EIS analyses. The adsorption of inhibitors on Al surfaces has been calculated and discussed by a Langmuir isotherm. The inhibitors that were created showed great effectiveness, with a noticeable increase in their inhibitory efficiency as the dosage was raised and the temperature was lowered. Inhibition efficiency each amounted to 88.6%, 84.5% at 400 ppm and 25 °C for MOF1@TiO2 and MOF1, respectively. Analyzing the polarization curves of synthesized inhibitors revealed that they were mixed-type inhibitors. Al was found to be surface inhibited when coated with a thin film of inhibitors, and "Al's surface morphology was assessed by different techniques such as scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and atomic force microscope (AFM)". "Theoretical models like quantum chemical and molecular dynamics simulation authenticated the experimental observation". The MOFs exhibit exceptional corrosion resistance against Al when exposed to acidic environments, according to several tests.

Natural chitosan-based carbon dots as an eco-friendly and effective corrosion inhibitor for mild steel in HCl solution

Polysaccharide chitosan and L-histidine were applied to synthesize chitosan-based carbon dots (CA-CDs) by a simple laser ablation method. After characterization of the CA-CDs by FT-IR, UV-vis, Raman, XRD, TEM, and XPS, the CA-CDs were introduced as an eco-friendly and high-performance corrosion inhibitor for mild steel (MS) in 1.0 M HCl solution. The inhibition action and mechanism of CA-CDs were determined by weight loss and electrochemical measurements, in combination with SEM, AFM, and XPS. The results show that CA-CDs as mixed-type inhibitors could effectively weaken the corrosion of MS in 1.0 M HCl solution, and their maximum inhibition efficiency reaches 97.4 % at 40 mg L-1. The adsorption behavior of CA-CDs well obeys the Langmuir adsorption isotherm containing both chemisorption and physisorption. The chemisorption mainly results from the multiple adsorption sites in the CA-CDs, and the physical adsorption is due to the blocking and barrier effect of CA-CD nanoparticles. Both adsorption behaviors were proposed to elucidate the corrosion inhibition mechanism of CA-CDs.

Novel synthesized triazole derivatives as effective corrosion inhibitors for carbon steel in 1M HCl solution: experimental and computational studies

This article outlines the synthesis of two derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol for the prevention of carbon steel corrosion in 1M HCl solution. These derivatives are (Z)-3-(1-(2-(4-amino-5-mercapto-4H-1,2,4-triazol-3-yl)hydrazono)ethyl)-2H-chromen-2-one (TZ1) and 5-(2-(9H-fluoren-9-ylidene)hydrazineyl)-4-amino-4H-1,2,4-triazole-3-thiol (TZ2). Weight loss, electrochemical experiments, surface examinations, and theoretical computation are used to evaluate the effectiveness of the two compounds to be used as corrosion inhibitors. Weight loss and electrochemical studies demonstrate that these derivatives reduce the corrosion rate of carbon steel. To examine the morphology and constitution of the carbon steel surface submerged in HCl solution as well as after adding inhibitors, surface examination tests are performed. Analysis of the test solution via UV-visible spectroscopy is employed to check the possibility of complex formation between inhibitor molecules and Fe2+ ions released during the corrosion process. In order to explore their biological activity, the antibacterial activity was investigated against (E. coli and Bacillus subtilis). Finally, theoretical confirmation of the experimental findings is provided by quantum chemical (DFT) and Monte Carlo (MC) simulation studies. More adsorption sites are present in the derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol, which offer a novel perspective for developing new classes of corrosion inhibitors with substantial protective efficacy, especially at high temperatures.

Assessment of New Imidazol Derivatives and Investigation of Their Corrosion-Reducing Characteristics for Carbon Steel in HCl Acid Solution

This study assessed the corrosion inhibitory and adsorption properties of two imidazol derivatives, namely 5-((2,4,5-triphenyl-1H-imidazol-1-yl)methyl)quinolin-8-ol (TIMQ) and 5-((2-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-1-yl)methyl)quinolin-8-ol (CDIQ), on carbon steel (CS) in 1 M of HCl using electrochemical methods, including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization measurements (PDP), UV–visible spectroscopy (UV–v), scanning electron microscopy (SEM), and molecular modeling. The findings showed that TIMQ and CDIQ were potent inhibitors with inhibition efficiencies of 94.8% and 95.8%, respectively. The potentiodynamic polarization experiments showed that the inhibitors worked as mixed-type inhibitors, and the impedance investigations supported the improvement of a protective layer for the inhibitor on the metal surface. Each inhibitor was adsorbed onto the carbon steel surfaces, according to the Langmuir adsorption method. The steel was shielded from acidic ions by an adsorbed coating of the inhibitor molecules, according to SEM. Density functional theory (DFT) calculations and molecular dynamics (MD) simulations were used to inspect the results, and a good correlation was found between these results and those of the study. This information can be applied to determine the effectiveness of inhibitors in a HCl acid solution.

Dopamine modified natural glucomannan as a highly efficient inhibitor for mild steel: Experimental and theoretical methods

In this work, Glucomannan was modified with dopamine to synthesize a new polysaccharide Schiff base (GAD). After confirmation of GAD by NMR and FT-IR spectroscopic methods, it was introduced as a sustainable corrosion inhibitor with excellent anti-corrosion action for mild steel in 0.5 M hydrochloric acid (HCl) solution. Employing electrochemical test, morphology measurement, and theoretical analysis, the anticorrosion performance of GAD on mild steel in 0.5 M HCl solution is determined. Maximum efficiency of GAD for suppressing the corrosion rate of mild steel at 0.12 g L^-1 reaches 99.0 %. After immersion in HCl solution for 24 h, the results from scanning electron microscopy indicate that GAD is firmly attached to the mild steel surface by making a protective layer. According to the X-ray photoelectron spectroscopy (XPS), FeN bonds existed on the steel surface indicate the presence of chemisorption between GAD and Fe to form stable complexes attracted to the active position on the mild steel. The effects of Schiff base groups on the corrosion inhibition efficiencies were also investigated. Moreover, the inhibition mechanism of GAD was further illustrated by the free Gibbs energy, quantum chemical calculation and molecular dynamics simulation.

Synthesis and Corrosion Inhibition Potential of Cerium/Tetraethylenepentamine Dithiocarbamate Complex on AA2024-T3 in 3.5% NaCl

In this work, a cerium/tetraethylenepentamine dithiocarbamate complex was synthesized and evaluated for the corrosion inhibition capability on an AA2024-T3 Al alloy in a 3.5% NaCl medium. The synthesized compounds were characterized via spectroscopic techniques. The corrosion inhibition behaviour of the complex was elucidated by electrochemical measurements and surface analysis techniques. Based on electrochemical test results, the corrosion inhibition efficiency of the complex increases with the immersion time of aluminium alloy in the test solution. The corrosion inhibition reaches 96.80% when the aluminium is immersed in a 3.5% NaCl solution containing a corrosion inhibitor for 120 h. The potentiodynamic polarization test results show that the complex acts as a mixed-type corrosion inhibitor and the passive range is widened. The surface analysis methods reveal that the corrosion inhibition ability of the complex originated from the formation of a protective layer on the Al surface. This film is created from the physisorption and chemisorption of cerium ions and organic parts simultaneously released from the complex molecules.

Interfacial interaction study of EDTA with the defect structure of Fe3-δ O4 passive film in an aggressive alkaline medium based on the lattice theory of point defects

Despite extensive research on the matter of corrosion inhibition efficiency, the interactions between the defect structure of the passive layer and the inhibitor molecules still remain poorly understood. In this study, the corrosion inhibition mechanism of ethylenediamine-tetraacetic acid as a carboxylate-based organic inhibitor on steel specimens in simulated concrete pore solution was studied. The point defect model was used to describe the response of the passive oxide film on the steel surface to the perturbation caused by the addition of the carboxylate compound. The electrochemical behavior of the steel specimens was evaluated through open circuit potential, electrochemical impedance spectroscopy and potentiodynamic analysis. The reduction in efficiency outside the optimal concentrations was discussed from an electrochemical point of view. We suggest that the performance of the inhibitor is highly dependent on the positively charged entities on the passive layer including anion vacancies and interstitial cations. To further investigate the physicochemical behavior of the organic molecules, density functional theory and adsorption isotherms were applied. The topography and morphology of the surface were analyzed through scanning electron microscopy. To confirm the inhibitive effect of EDTA, the elements and chemical bonds present on the surface were characterized via X-ray photoelectron spectroscopy. The surface analysis confirmed that the addition of EDTA formed a network of chemical bonds, which significantly hindered the corrosion phenomenon.