Biomedical and photocatalytic applications of biosynthesized silver nanoparticles: Ecotoxicology study of brilliant green dye and its mechanistic degradation pathways

Carboxylated xylan nanoparticles prepared by sequential periodate-chlorite oxidation and their application as a highly effective bio-based adsorbent

Xylan is one of the main biomass components and is considered to have the potential for environmental remediation due to its renewability, biodegradability, and biocompatibility. In this study, xylan extracted from esparto pulp was prepared as xylan nanoparticles (XNPs), which were subsequently modified to carboxylated xylan nanoparticles (CXNPs) through sequential periodate-chlorite oxidation. Characterization of CXNPs demonstrated that the modified CXNPs possessed a core-shell structure, with dicarboxylic acid xylan as the shell and xylan hydrate crystals as the core. The adsorption study revealed the CXNPs with carboxyl groups on the surface exhibited a high adsorption capacity to methylene blue (MB) at 919.6 mg/g. The adsorption mechanism analysis indicated that the adsorption process was controlled by electrostatic interactionsThese results provide a promising modification approach for the development of xylan-based adsorbent materials that can assist in environmental remediation.

Nanotechnology in the manufacturing of sustainable food packaging: a review

At present, there is an escalating concern among consumers regarding the spoilage and safety of food items. Furthermore, the packaging materials used within the packaging industry are typically unsustainable food packaging. To confront this significant challenge, nanotechnology may offer a feasible alternative to standard packaging practices. Several naturally derived polymers are capable of substituting petrochemical-based polymers. The application of biopolymers has demonstrated an ability to prolong the shelf life of food items. However, these materials frequently exhibit limited functionality. The incorporation of nanomaterials can significantly enhance the capabilities of these films. Furthermore, the fields of nanotechnology and food packaging are trending areas of research that hold promise for addressing various challenges within the packaging sector. Integrating nanomaterials into food packaging materials yields significant advantages relative to traditional packaging approaches. It contributes to enhanced food quality and safety, provides consumers with insights into their dietary practices, enables the repair of packaging tears, and increases the longevity of food storage. Incorporating various nanomaterials into biobased films has gained prominence in sustainable food packaging. This review explores the general overview of the historical perspective of nanotechnology. In addition, we addressed the various kinds of nanomaterials involved in food packaging. The functions of nanomaterials in food packaging applications are briefly reviewed. The compilation and discussion highlight the nanotechnology for safe, sustainable, and satisfiable food packaging. Finally, the toxicity, safety, and future trends of the nanomaterials in sustainable food packaging were briefly summarized. This review underscores the necessity of nanotechnology in sustainable food packaging.

Spectroscopic approach to optimize the biogenic silver nanoparticles for photocatalytic removal of ternary dye mixture and ecotoxicological impact of treated wastewater

The fabricating of extremely effective, economical, ecologically safe, and reusable nanoparticle (NP) catalysts for the removal of water pollution is urgently needed. This study, spectroscopically optimizes the process parameters for the biogenic synthesis of AgNP catalysts using Cledrdendrum infortunatum leaf extract. The optimization of several synthesis parameters was systematically studied using UV-Vis spectroscopy to identify the ideal conditions for AgNPs formation. The AgNPs are spherical with a size of ~ 20 nm, pure and stable. Mechanistic insights into the biogenic synthesis process were explored. The photocatalytic performance of biogenic AgNPs was evaluated for the degradation of three common (crystal violet, thioflavin T, and methylene blue) dyes as models in ternary mixtures under the influence of sunlight. AgNPs show excellent photocatalytic efficiency in terms of degradation percentage (82.89-96.96% within 110 min), kinetics (0.0247-0.0331 min-1), half-life (20.96-28.11 min), and T80 (48.67-65.28 min) and also easily recovered and reused. Ecological safety assessment of the treated wastewater was assessed on the growths of rice, mustard, and lentil plants, and preliminary findings demonstrated that seedling growths for treated wastewater were nearly similar to the control sample but retarded in dye-contaminated wastewater suggesting potential use of treated wastewater for sustainable agriculture without compromising ecological balance. So, this study explores biogenic AgNPs as cost-effective, safe, and sustainable photocatalytic agents for the remediation of hazardous mix dyes and real-life applications of treated water for agricultural purposes.

Therapeutic Potential of Green Synthesized Silver Nanoparticles for Promoting Wound-Healing Process in Diabetic Mice

Diabetes is a serious metabolic disorder characterized by abnormal glucose levels in the body. Delayed wound healing is a severe diabetes complication. Nanotechnology represents the latest advancement in treating diabetic wounds through nanoparticles (NPs). In this study, silver nanoparticles (AgNPs) were synthesized using a green method involving cucumber pulp extract. The synthesis was confirmed using techniques including ultraviolet-visible spectrophotometry (UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX). To evaluate wound-healing properties, mouse models were utilized with wounds induced by excision on the dorsal surface. An ointment containing silver nanoparticles was applied to assess its healing potential. Additionally, antibacterial and antioxidant activities were examined using agar well diffusion and DPPH scavenging methods, respectively. The results demonstrated that the ointment prepared with green synthesized AgNPs effectively healed the wounds within 15 days, while also exhibiting antibacterial and antioxidant properties. Therefore, it can be concluded that due to its efficacy in biological activities, silver nanoparticles can be employed in the treatment of diabetic wounds.

Bio‐Fabricated Silver Nanoparticles for Catalytic Degradation of Toxic Dyes and Colorimetric Sensing of Hg2+

In the present study, silver nanoparticles were synthesized via green synthesis using fenugreek (Trigonella foenum‐graecum L.) seeds of variety HM 425. The AgNPs were characterized by using UV‐Visible spectroscopy, Particle size analyzer, Field emission scanning electron microscopy coupled to Energy dispersive X‐ray spectroscopy, XRD, High resolution transmission electron microscopy and Fourier Transform Infrared Spectroscopy. The AgNPs were spherical and had an average particle size of 28 nm. The reduction of cationic dyes Methylene blue, Rhodamine B, and an anionic azo dye Methyl Orange by Sodium borohydride was used as a model reaction to investigate the catalytic ability of AgNPs. The results demonstrated an efficient catalytic dye degradation of methylene blue (95.81 %, 25 min, 0.1737±0.01 min−1), Rhodamine B (90.23 %, 15 min, 0.1388±0.01 min−1) and methyl orange (83.63 %, 39 min, 0.0412±0.002 min−1). The synthesized AgNPs had an excellent detection limit of 12.50 μM for Hg2+, making them excellent solid bio‐based sensors for mercury sensing.

Biodegradation and detoxification study of triphenylmethane dye (Brilliant green) in a recirculating packed-bed bioreactor by bacterial consortium

In the last few decades, Brilliant green (BG) dye is widely employed to colour the fabric materials in various industries (e.g. textile, pulp and paper, etc.). The wastewater containing BG dye emerges as a major challenge among the researchers due to its toxic, mutagenic, and carcinogenic effects on human beings and marine life. In this context, the present study is mainly focused on the biodegradation of BG dye present in wastewater. The biodegradation of BG dye was performed in an indigenously designed recirculating packed bed bioreactor (RPBBR). Modified Polypropylene-Polyurethane foam (PP-PUF), a support packing material, was immobilised with a newly isolated bacterial consortium of Enterobacter asburiae strain SG43 (BGT1) and Alcaligenes sp. SY1 (BGT2). The bioreactor was operated under various organic loading rates (OLRs) of 2.7, 1.27, 0.93, 0.71, and 0.53 kg COD/m3.d-1 with a hydraulic retention time (HRT) of 4 days. The bioreactor exhibited the maximum BG dye removal efficiency of 91%. Proton Nuclear Magnetic Resonance (1H NMR), UV-Vis spectroscopy, Gas chromatography-mass spectrometry (GC-MS), and Fourier Transform Infrared Spectroscopy (FTIR) depicted the biodegradation of BG dye. Phaseolus mungo seeds germinated in BG dye biodegraded wastewater was significantly high (83.56%) than the untreated wastewater (32.4%), which was reasonably subjected to the detoxification of treated wastewater.

Phytogenic nanoparticles: synthesis, characterization, and their roles in physiology and biochemistry of plants

Researchers are swarming to nanotechnology because of its potentially game-changing applications in medicine, pharmaceuticals, and agriculture. This fast-growing, cutting-edge technology is trying different approaches for synthesizing nanoparticles of specific sizes and shapes. Nanoparticles (NPs) have been successfully synthesized using physical and chemical processes; there is an urgent demand to establish environmentally acceptable and sustainable ways for their synthesis. The green approach of nanoparticle synthesis has emerged as a simple, economical, sustainable, and eco-friendly method. In particular, phytoassisted plant extract synthesis is easy, reliable, and expeditious. Diverse phytochemicals present in the extract of various plant organs such as root, leaf, and flower are used as a source of reducing as well as stabilizing agents during production. Green synthesis is based on principles like prevention/minimization of waste, reduction of derivatives/pollution, and the use of safer (or non-toxic) solvent/auxiliaries as well as renewable feedstock. Being free of harsh operating conditions (high temperature and pressure), hazardous chemicals and the addition of external stabilizing or capping agents makes the nanoparticles produced using green synthesis methods particularly desirable. Different metallic nanomaterials are produced using phytoassisted synthesis methods, such as silver, zinc, gold, copper, titanium, magnesium, and silicon. Due to significant differences in physical and chemical properties between nanoparticles and their micro/macro counterparts, their characterization becomes essential. Various microscopic and spectroscopic techniques have been employed for conformational details of nanoparticles, like shape, size, dispersity, homogeneity, surface structure, and inter-particle interactions. UV-visible spectroscopy is used to examine the optical properties of NPs in solution. XRD analysis confirms the purity and phase of NPs and provides information about crystal size and symmetry. AFM, SEM, and TEM are employed for analyzing the morphological structure and particle size of NPs. The nature and kind of functional groups or bioactive compounds that might account for the reduction and stabilization of NPs are detected by FTIR analysis. The elemental composition of synthesized NPs is determined using EDS analysis. Nanoparticles synthesized by green methods have broad applications and serve as antibacterial and antifungal agents. Various metal and metal oxide NPs such as Silver (Ag), copper (Cu), gold (Au), silicon dioxide (SiO2), zinc oxide (ZnO), titanium dioxide (TiO2), copper oxide (CuO), etc. have been proven to have a positive effect on plant growth and development. They play a potentially important role in the germination of seeds, plant growth, flowering, photosynthesis, and plant yield. The present review highlights the pathways of phytosynthesis of nanoparticles, various techniques used for their characterization, and their possible roles in the physiology of plants.

Sustainable fabrication of hybrid silver-copper nanocomposites (Ag-CuO NCs) using Ocimum americanum L. as an effective regime against antibacterial, anticancer, photocatalytic dye degradation and microalgae toxicity

In this study, a sustainable fabrication of hybrid silver-copper oxide nanocomposites (Ag-CuO NCs) was accomplished utilizing Ocimum americanum L. by one pot green chemistry method. The multifarious biological and environmental applications of the green fabricated Ag-CuO NCs were evaluated through their antibacterial, anticancer, dye degradation, and microalgae growth inhibition activities. The morphological features of the surface functionalized hybrid Ag-CuO NCs were confirmed by FE-SEM and HR-TEM techniques. The surface plasmon resonance λ_max peak appeared at 441.56 nm. The average hydrodynamic size distribution of synthesized nanocomposite was 69.80 nm. Zeta potential analysis of Ag-CuO NCs confirmed its remarkable stability at -21.5 mV. XRD and XPS techniques validated the crystalline structure and electron binding affinity of NCs, respectively. The Ag-CuO NCs demonstrated excellent inhibitory activity against Vibrio cholerae (19.93 ± 0.29 mm) at 100 μg/mL. Anticancer efficacy of Ag-CuO NCs was investigated against the A549 lung cancer cell line, and Ag-CuO NCs exhibited outstanding antiproliferative activity with a low IC₅₀ of 2.8 ± 0.05 μg/mL. Furthermore, staining and comet assays substantiated that the Ag-CuO NCs hindered the progression of the A549 cells and induced apoptosis as a result of cell cycle arrest at the G₀/G₁ phase. Concerning the environmental applications, the Ag-CuO NCs displayed efficient photocatalytic activity against eosin yellow degradation up to 80.94% under sunlight irradiation. Microalgae can be used as an early bio-indicator/prediction of environmental contaminants and toxic substances. The treatment of the Ag-CuO NCs on the growth of marine microalgae Tetraselmis suecica demonstrated the dose and time-dependent growth reduction and variations in the chlorophyll content. Therefore, the efficient multifunctional properties of hybrid Ag-CuO NCs could be exploited as a regime against infective diseases and cancer. Further, the findings of our investigation witness the remarkable scope and potency of Ag-CuO NCs for environmental applications.

Multipollutant Abatement through Visible Photocatalytic System

Water pollution damages the aquatic environment due to the presence of organic contaminants, which in turn is distressing to the ecosystem. Photocatalytic activity is a greener and promising method to degrade these organic contaminants. In this research, we present the degradation of diverse water pollutants through zinc/iron oxide nanoparticles serving as photocatalysts. The photocatalyst was studied for its efficiency to photodegrade congo red, brilliant green and para nitro phenol. Moreover, it also presented an antibacterial activity against the bacterium E. coli. Photocatalyst was characterized via X-ray diffraction, scanning electron microscopy-energy dispersive X-ray spectroscopy, and fourier-transform infrared spectroscopy. Tauc plot was used to measure the optical band gap (1.84 eV). The effect of various parameters such as catalyst dose, contact time, dye dose/concentration and pH were also investigated to determine the optimum point of maximum degradation through response surface methodology. A face-centered composite design was used, and a quadratic model was followed by congo red, brilliant green dyes and para nitrophenol. The maximum photodegradation efficiencies were 99%, 94.3%, and 78.5% for congo red, brilliant green and phenol, respectively. Quantum yield for congo red, brilliant green and para-nitrophenol were 9.62 × 10−8, 1.17 × 10−7 and 4.11 × 10−7 molecules/photons, while the reaction rates were 27.1 µmolg−1h−1, 29.61 µmolg−1h−1 and 231 µmolg−1h−1, respectively.

Decolorization of Rhodamine B by silver nanoparticle-loaded magnetic sporopollenin: characterization and process optimization

Silver nanoparticles (Ag NPs) were reduced on the surface of magnetic sporopollenin (Fe₃O₄@SP) modified with poly-dopamine to enhance the degradation capability for Rhodamine B (RhB). The polydopamine-coated Fe₃O₄@SP (PDA@ Fe₃O₄@SP) acts as a self-reducing agent for Ag⁺ ions to Ag⁰. The structural properties of the synthesized nanocomposite were determined using Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), and vibrating sample magnetometer (VSM). The systematic study of the degradation process was performed using Response Surface Methodology (RSM) to determine the relationship between the four process variables, namely, initial RhB concentration, NaBH₄ amount, catalyst amount, and time. Optimum points were determined for these four parameters using both matrix and numerical optimization methods. Under optimum conditions, RhB was decolorized with a yield of 98.11%. The apparent activation energy (E_a) and rate constant (k) for the degradation were 24.13 kJ/mol and 0.77 min^-1, respectively. The reusability studies of the Ag@PDA@Fe₃O₄@SP exhibited more than 85% degradation ability of the dye even after five cycles. As a result, Ag@PDA@Fe₃O₄@SP possessed high catalytic activity, fast reduction rate, good reusability, easy separation, and simple preparation, endowing this catalyst to be used as a promising catalyst for the decolorization of dyes in aqueous solutions.

Biosynthesis, Characterization, Evaluation, and Shelf-Life Study of Silver Nanoparticles against Cotton Bollworm, Helicoverpa armigera (Hubner) (Noctuidae: Lepidoptera)

Nanoparticles provide a promising and alternative platform of eco-friendly technologies that encompasses better cost-resilient remedies against one of the most economically harnessing insect pests of cotton. The main goal of this research was to provide a better management strategy through biologically synthesizing (sunlight exposure method) green nanoparticles from leaf extracts of Azadirachta indica and Pongamia pinnata and proving their bioefficacy on H. armigera (2nd instar). Characterization of bio-synthesized silver nanoparticles was carried out using UV-Visible spectroscopy for confirming the formation of nanoparticles, a Particle Size Analyzer (PSA) for determining the size/distribution of particles, and a Scanning Electron Microscope (SEM) for analyzing the surface topology of nanoparticles. The results obtained from PSA analysis showed that A. indica and P. pinnata-based silver nanoparticles had an average diameter of 61.70 nm and 68.80, respectively. Topographical images obtained from SEM proved that most of the green synthesized silver nanoparticles were spherical in shape. A. indica-based silver nanoparticles were found to be comparatively more efficient and have higher insecticidal activity compared to P. pinnata-based nanoparticles. A. indica-based AgNPs recorded larval mortality of 60.00 to 93.33 percent at the concentrations of 500 to 2000 ppm, followed by P. pinnata-based nanoparticles, with 60.00 to 90.00 percent larval mortality. Shelf-life studies revealed that A. indica-based AgNPs had the maximum negative zeta potential of -58.96 mV and could be stored for three months without losing bioefficacy and up to six months with negligible reduction in bioefficacy. Symptoms caused by silver nanoparticles were leakage of body fluids, sluggishness, inactiveness, brittleness, etc.

Leucophyllum frutescens mediated synthesis of silver and gold nanoparticles for catalytic dye degradation

The application of nanotechnology is gaining worldwide attention due to attractive physico-chemical and opto-electronic properties of nanoparticles that can be also employed for catalytic dye degradation. This study reports a phytogenic approach for fabrication of silver (AgNPs) and gold nanoparticles (AuNPs) using Leucophyllum frutescens (Berl.) I. M. Johnst (Scrophulariaceae) leaf extract (LFLE). Development of intense dark brown and purple color indicated the synthesis of AgNPs and AuNPs, respectively. Further characterization using UV-visible spectroscopy revealed sharp peak at 460 nm and 540 nm for AgNPs and AuNPs, respectively that were associated to their surface plasmon resonance. High resolution transmission electron microscope (HRTEM) revealed the spherical shape of the AgNPs, whereas anisotropic AuNPs were spherical, triangular and blunt ended hexagons. The majority of the spherical AgNPs and AuNPs were ∼50 ± 15 nm and ∼22 ± 20 nm, respectively. Various reaction parameters such as, metal salt concentration, temperature and concentration of the leaf extract were optimized. Maximum synthesis of AgNPs was obtained when 5 mM for AgNO₃ reacted with 10% LFLE for 48 h at 50°C. Likewise, AuNPs synthesis was highest when 2 mM HAuCl₄ reacted with 10% LFLE for 5 h at 30°C. Energy dispersive spectroscopy (EDS) showed phase purity of both the nanoparticles and confirmed elemental silver and gold in AgNPs and AuNPs, respectively. The average hydrodynamic particles size of AgNPs was 34.8 nm while AuNPs was 140.8 nm as revealed using dynamic light scattering (DLS) that might be due to agglomeration of smaller nanoparticles into larger clusters. ZETA potential of AgNPs and AuNPs were 0.67 mV and 5.70 mV, respectively. X-ray diffraction (XRD) analysis confirmed the crystallinity of the nanoparticles. Fourier transform infrared spectroscopy (FTIR) confirmed that various functional groups from the phytochemicals present in LFLE played a significant role in reduction and stabilization during the biogenic synthesis of the nanoparticles. The bioreduced AgNPs and AuNPs catalytically degraded Rhodamine B dye (RhB) in presence of UV-light with degradation rate constants of 0.0231 s⁻¹ and 0.00831 s⁻¹, respectively. RhB degradation followed a first order rate kinetics with 23.1 % and 31.7% degradation by AgNPs and AuNPs, respectively.

Phyto-fabrication of silver nanoparticles and their catalytic dye degradation and antifungal efficacy

The biogenic synthesis of silver nanoparticles (AgNPs) and their potent application against dye degradation and phytopathogens are attracting many scientists to nanotechnology. An attempt was made to synthesize silver nanoparticles using Plantago ovata leaf extract and test their effectiveness in removing organic dyes and antifungal activity. In the present study, stable AgNPs were synthesized from 0.1 mM AgNO₃ and authenticated by observing the color change from yellow to red-brown, which was confirmed with wavelength UV-Vis spectrophotometer detection. The crystalline nature of the particles was characterized by x-ray diffraction (XRD) patterns. Furthermore, the AgNPs were characterized by high-resolution transmission electron microscope and scanning electron microscope investigations. Atomic force microscopy (AFM) and Raman spectra were also used to confirm the size and structure of the synthesized AgNPs. The elemental analysis and functional groups responsible for the reduction of AgNPs were analyzed by electron dispersive spectroscopy and fourier transform infra-red spectroscopy Fourier transforms infrared, respectively. A new biological approach was taken by breaking down organic dyes such as methylene blue and congo red. The AgNPs effectively inhibit the fungal growth of Alternaria alternata. This could be a significant achievement in the fight against many dynamic pathogens and reduce dye contamination from waste water.

Photocatalytic response in water pollutants with addition of biomedical and anti-leishmanial study of iron oxide nanoparticles

Public health is a major concern globally, owing to the presence of industrial dyes in the effluent. Nanoparticles with green synthesis are an enthralling research field with various applications. This study deals with investigating the photocatalytic potential of Fe-oxide nanoparticles (FeO-NPs) for the degradation of methylene blue dye and their potential biomedical investigations. Biosynthesis using Anthemis tomentosa flower extract showed to be an effective method for the synthesis of FeO-NPs. The freshly prepared FeO-NPs were characterized through UV/Vis spectroscopy showing clear peak at 318 nm. The prepared FeO-NPs were of smaller size and spherical shape having large surface area and porosity with no aggregations. The FeO-NPs were characterized using XRD, FTIR, HRTEM, SEM and EDX. The HRTEM results showed that the particle size of FeO-NPs was 60-90 nm. The antimicrobial properties of FeO-NPs were investigated against two bacterial Staphylococcus aureus 13 (±0.8) and Klebsiella pneumoniae 6(±0.6) and three fungal species Aspergillus Niger, Aspergillus flavus, and Aspergillus fumigatus exhibiting a maximum reduction of 57% 47% and 50%, respectively. Moreover, FeO-NPs exhibited high antioxidant properties evaluated against ascorbic acid. Overall, this study showed high photocatalytic, antimicrobial, and antioxidant properties of FeO-NPs owing to their small size and large surface area. However, the ecotoxicity study of methylene blue degradation products showed potential toxicity to aquatic organisms.

Recent advances on botanical biosynthesis of nanoparticles for catalytic, water treatment and agricultural applications: A review

Green synthesis of nanoparticles using plant extracts minimizes the usage of toxic chemicals or energy. Here, we concentrate on the green synthesis of nanoparticles using natural compounds from plant extracts and their applications in catalysis, water treatment and agriculture. Polyphenols, flavonoid, rutin, quercetin, myricetin, kaempferol, coumarin, and gallic acid in the plant extracts engage in the reduction and stabilization of green nanoparticles. Ten types of nanoparticles involving Ag, Au, Cu, Pt, CuO, ZnO, MgO, TiO₂, Fe₃O₄, and ZrO₂ with emphasis on their formation mechanism are illuminated. We find that green nanoparticles serve as excellent, and recyclable catalysts for reduction of nitrophenols and synthesis of organic compounds with high yields of 83-100% and at least 5 recycles. Many emerging pollutants such as synthetic dyes, antibiotics, heavy metal and oils are effectively mitigated (90-100%) using green nanoparticles. In agriculture, green nanoparticles efficiently immobilize toxic compounds in soil. They are also sufficient nanopesticides to kill harmful larvae, and nanoinsecticides against dangerous vectors of pathogens. As potential nanofertilizers and nanoagrochemicals, green nanoparticles will open a revolution in green agriculture for sustainable development.

Microwave-assisted continuous flow phytosynthesis of silver nanoparticle/reduced graphene oxide composites and related visible light catalytic performance

The creation of an environmentally friendly synthesis method for silver nanomaterials (AgNPs) is an urgent concern for sustainable nanotechnology development. In the present study, a novel straightforward and green method for the preparation of silver nanoparticle/reduced graphene oxide (AgNP/rGO) composites was successfully developed through the combination of phytosynthesis, continuous flow synthesis and microwave-assistance. Oriental persimmon (Diospyros kaki Thunb.) extracts were used as both plant reducing and capping agents for fast online synthesis of AgNP/rGO composites. The experimental parameters were optimized and the morphologies of the prepared materials were investigated. The characterization results reveal that spherical AgNPs were quickly synthesized and uniformly dispersed on rGO sheets using the proposed online system. Fourier transform infrared spectroscopy analysis confirmed that phenols, flavonoids, and other substances in the plant extracts played a decisive role in the synthesis of AgNP/rGO composites. Using sodium borohydride (NaBH₄) degradation of p-nitrophenol (4-NP) as a model, the catalytic activity of the prepared AgNP/rGO materials was evaluated. The complete degradation of 4-NP was achieved within 12 min through the use of AgNP/rGO materials, and the composite had a much better catalytic activity than the bare AgNPs and rGO had. Compared with the conventional chemical method, our online method is facile, fast, cost-efficient, and environmentally friendly.

Zn-MOF decorated bio activated carbon for photocatalytic degradation, oxygen evolution and reduction catalysis

An emerging global necessity for alternative resources combined with maximum catalytic efficiency, low cost, and eco-friendly composite remains a hotspot in the scientific society. Hereby, a novel protocol is approached to design a heterostructure of Zinc MOF decorated on the surface of 2D activated carbon (AC) through a simplistic approach. To begin with, analytical, morphological and spectroscopical studies were performed to identify the functional moieties, cruciate-flower like morphology and oxidative state of atoms present in the composite Zn-MOF @AC. The photocatalytic material aids in degrading both cationic and anionic dye in a UV (254 nm) irradiated environment at a rate of 86.4% and 77.5% within 90 mins. Subsequently, the hybrid materials are coated on the carbon substrate to evaluate the catalytic activity using oxygen evolution and reduction reaction process. The mechanical insight for the catalytic activity relies on the electronic transitions of atoms on the edges of the sheets ascribing to d-d energy levels between the interfacial electron movement. Our composite exhibits an overpotential of 0.7 V and a Tafel slope of 70 mV/dec for the oxygen reduction reaction. This study proposes an alternate approach for developing MOF decorated carbon-based composites for photocatalytic degradability and energy necessity.

Opposite effects of gold and silver nanoparticle decoration of graphenic surfaces on bacterial attachment

The interaction between bacteria and nanoparticles is currently a central topic in bionanotechnology.

Antibacterial and antibiofilm efficacy of Ag NPs, Ni NPs and Al2O3 NPs singly and in combination against multidrug-resistant Klebsiella pneumoniae isolates

BACKGROUND

Although traditional antibiotic therapy provided an effective approach to combat pathogenic bacteria, the long-term and widespread use of antibiotic results in the evolution of multidrug-resistant bacteria. Recent progress in nanotechnology offers an alternative opportunity to discover and develop novel antibacterial agents.

METHODS

A total of 51 K. pneumoniae strains were collected from several specimens of hospitalized patients and identified by two parallel methods (biochemical tests and Vitek-2 system). The antibiotic sensitivity of isolates was evaluated by disk diffusion antibiogram and Vitek-2 system. The biofilms formation ability of antibiotic-resistant strains was examined by microtiter plate and tube methods based on crystal violet staining. The molecular technique was used to determine key genes responsible for biofilms formation of clinical isolates. The antibacterial and antibiofilm activities of Ag NPs, Ni NPs, Al₂O₃ NPs singly (NPs) and in combination (cNPs) were investigated against selected strains using standard methods. Moreover, the cytotoxicity of NPs was evaluated on mouse neural crest-derived (Neuro-2A) cell line.

RESULTS

The results of bacterial studies revealed that more than 80 % of the isolates were resistant to commonly used antibiotics and about 95 % of them were able to form biofilms. Moreover, the presence of fimA and mrkA genes were determined in all biofilm-producing strains. The results of antibacterial and antibiofilm activities of NPs and cNPs demonstrated the lower MIC and MBEC values for Al₂O₃ NPs singly as well as for Ag/Ni cNPs and Ag/Al₂O₃ cNPs in combination, respectively. Overall, the inhibitory effects of cNPs were superior to NPs against all strains. Furthermore, the results of the checkerboard assays showed that Ag NPs act synergistically with two other NPs against multidrug-resistant Klebsiella pneumoniae (MDR-K. pneumoniae) isolates. The in vitro cytotoxicity assay revealed no significant toxicity of NPs against Neuro-2A cells.

CONCLUSION

In the present study, the combination of Ag NPs, Ni NPs, and Al₂O₃ NPs were used against MDR-K. pneumoniae strains and antibacterial and antibiofilm activities were observed for Ag/Ni cNPs and Ag/Al₂O₃ cNPs.

Mechanistically understanding adsorption of methyl orange, indigo carmine, and methylene blue onto ionic/nonionic polystyrene adsorbents

The involved interaction information concerning adsorbate-adsorbate and adsorbate-adsorbent is indispensable for developing and optimizing adsorption treatment of dye wastewater. Single and bi-solute adsorption of methyl orange (MO), indigo carmine (IC), and methylene blue (MB) on polystyrene anion exchanger (PsAX), defunctionalized version of PsAX (DF-PsAX), and hyper-cross-linked polystyrene adsorbent (MN200) were investigated to obtain a mechanistic understanding. Under acidic condition, higher adsorption efficiencies of PsAX due to extra intermolecular interactions of MO between the protonated tertiary amine group and the sulfate groups were observed, while strong alkaline condition is favorable for the adsorption of IC and MB by PsAX. MN200 exhibited much larger adsorption capacity toward MB than that toward MO or IC, because the fused-rings structure of MB is more polarizable and can form stronger nonionic intermolecular attractions with the matrix structure of polystyrene adsorbents. Bi-solute adsorption reveals that MO has obvious competitive effect toward IC adsorption at low concentrations, but it is not the case for the adsorption at high concentrations, where IC molecules can form intermolecular H-bonding interactions to defend the competition. the thermodynamic parameters confirm the endothermic and spontaneous nature of MO adsorption by PsAX, and ≈ 48 KJ mol^-1 of the enthalpy change (∆H) imply the adsorption is not just physical absorption. Additionally, water/ethanol mixture solution of NaCl can almost thoroughly regenerate the exhausted PsAX, whereas only aqueous solution without ethanol is invalid.

Preparation and characterization of activated carbon from hydrochar by hydrothermal carbonization of chickpea stem: an application in methylene blue removal by RSM optimization

Herein, mesoporous activated carbon (AC) was prepared through potassium hydroxide (KOH) activation of hydrochar derived from the hydrothermal carbonization (HTC) of chickpea stem (CS), and successfully applied to remove methylene blue (MB) dye from aqueous solutions in a batch system. The HTC-CSAC was prepared depending on different impregnation ratios (hydrochar:KOH, 50-150%), impregnation times (12-48 h), activation temperatures (400-600°C) and activation times (30-60 min). To define HTC-CSAC, various analytical techniques such as iodine adsorption number (IAN), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) were used. In the removal process of MB by the best HTC-CSAC with a high IAN of 887 mg g^-1 obtained under conditions including impregnation ratio of 70%, activation time of 45 min, activation temperature of 600°C and impregnation time of 24 h, the effects of adsorption parameters such as pH factor (2-10), adsorbent dosage (50-100 mg), initial MB concentration (40-80 mg/L) and contact time (90-180 min) were studied. Besides, a detailed evaluation of the adsorption mechanism for the removal of MB by HTC-CSAC was performed. The Langmuir model indicated the best isotherm data correlation, with a maximum monolayer adsorption capacity (Q_max) of 96.15 mg g^-1. The adsorption isotherm findings demonstrated that the MB removal process is feasible, and that this process takes place through the physical interaction mechanism. Additionally, the HTC-CSAC adsorbent exhibited a high regeneration and reuse performance in MB removal. After five consecutive adsorption-desorption cycles, HTC-CSAC maintained the reuse efficiency of 77.86%. As a result, the prepared HTC-CSAC with a high BET surface area of 455 m² g^-1 and an average pore diameter of 105 Å could be recommended as a promising and reusable adsorbent in the treatment of synthetic dyes in wastewaters.

Fabrication of Zn-based magnetic zeolitic imidazolate framework bionanocomposite using basil seed mucilage for removal of azo cationic and anionic dyes from aqueous solution

The Basil seeds mucilaginous polysaccharide exhibits remarkable physical and chemical properties like high water-absorbing capacity, emulsifying, and stabilizing properties. The metal-organic frameworks are one of the most promising precursors made of metal clusters and organic connectors for the fabrication of advanced adsorbents due to their unique properties. In this study, the bionanocomposite of magnetic zeolitic imidazolate framework-8 was successfully synthesized and applied to adsorb azo cationic and anionic dyes. The synthesized magnetite nanoparticles were pretreated with mucilage extracted from basil seeds to acquire negatively charged magnetite surface, followed by nucleation through attracting zinc cation, and then the growth of metal-organic frameworks which yields high-quality ZIF-8 crystals. The samples were characterized by Field Scanning Electron Microscopy, X-ray Diffraction, Fourier Transform Infrared Spectrometry, vibrating sample magnetometer, and Brunauer-Emmett-Teller surface area analysis. In the process of adsorption, influencing factors and recycling regeneration were discussed, and the adsorption mechanisms such as kinetics, isotherm, and thermodynamics were explored. The results of the adsorption process showed that maximum adsorption capacities were 9.09 and 13.21 mg/g for Methylene blue and Eriochrome Black T, respectively. The excellent reusability combined with its magnetic separation property makes the nanocomposite a promising adsorbent for the removal of cationic and anionic dyes.