Present and emerging trends in using pharmaceutically active compounds as aqueous phase corrosion inhibitors

Effects of Vitamins as Green Inhibitors on the Surface of Steel Bars in Chloride-Polluted Simulated Concrete Pore Solution: Experimental, Characteristic Analysis, and Theoretical Calculation

This study evaluates the effects of vitamins B1 (VB1), B6 (VB6), B3 (VB3), and C (VC) as green corrosion inhibitors for steel bars in a chloride-polluted simulated concrete pore (SCP) solution. Electrochemical tests demonstrated that VB6 achieves the highest corrosion inhibition efficiency (IE%) of 92.86%, and the IE% of VB1 and VC are 91.96 and 91.51%, respectively, while VB3 shows the least effectiveness of 83.49% at their respective optimum concentrations. Scanning electron microscopy revealed that vitamin treatment significantly improves the surface morphology, enhancing smoothness. Energy dispersive X-ray spectroscopy confirmed the presence of protective molecular layers and precipitated calcium (Ca) on the steel surface, indicating effective adsorption. X-ray photoelectron spectroscopy revealed that vitamin interacts with iron (Fe) through chemisorption and physisorption, contributing to the formation of protective FeOOH compounds. Moreover, it also suggests that the main component of precipitated Ca is protective calcium carbonate (CaCO3). Density functional theory calculations showed that vitamins adhere to the surface of γ-FeOOH through hydrogen bonds. These findings underscore the potential of vitamins as effective green inhibitors in corrosion prevention applications.

In-Depth Insight into Corrosion Inhibition Performance of Sweet Potato Leaf Extract as a Green and Efficient Inhibitor for 6N01 Al Alloy in the Seawater: Experimental and Theoretical Perspectives

Corrosion protection of metal has become an important and urgent topic, which requires the development of an inexpensive, environmentally friendly, and highly efficient corrosion inhibitor. Herein, a sweet potato leaf extract (SPL) was obtained by a simple water-based extraction method and then as a green corrosion inhibitor for 6N01 Al alloy in the seawater was well investigated by the weight loss method and various electrochemical tests. Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-vis) spectroscopies were carried out to investigate the compositions of SPL. The findings from the potentiodynamic polarization (PDP) curves suggest that SPL functions as a typical mixed-type corrosion inhibitor. Notably, the maximum corrosion inhibition efficiency reaches 94.6% following a 36 h immersion period at 25 °C. The adsorption behavior of SPL on the Al alloy surface belongs to the Langmuir adsorption isotherm. The Gibbs free energy value illustrates that the adsorption of SPL contains both physisorption and chemisorption. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) indicate that SPL is firmly attached to the Al alloy surface by making a protective layer, which can effectively inhibit the corrosion of the Al alloy in the seawater. Furthermore, quantum chemical calculations were applied to validate the chemical adsorption and elucidate the relationship between the electronic structure of the active components in SPL and their effectiveness in corrosion inhibition.

Density functional theory study of the corrosion inhibition performance of 6-mercaptopurine and 6-thioguanine expired drugs toward the aluminium (111) surface

The potentiality of the 6-mercaptopurine (MP) and 6-thioguanine (TG) expired drugs toward the corrosion inhibition of the aluminium (Al) (111) surface was widely investigated using a series of density functional theory (DFT) calculations. A competition between the anti-corrosive features of the studied drugs in the gas and aqueous phases was conducted on both neutral and protonated forms by means of quantum mechanical descriptors. The results of the electrostatic potential analysis demonstrated the prominent nucleophilic nature of the sulfur and nitrogen atoms over the structures of the examined drugs. The frontier molecular orbital theory findings outlined the higher preferability of TG over MP as a corrosion inhibitor. Upon determining the most beneficial configurations of the MP/TG⋯Al (111) complexes, first-principles molecular dynamics simulations were executed. Interestingly, the competence of the TG drug in the corrosion inhibition process of Al (111) was more extensive than that of the MP one, which was confirmed by the interaction energy values of -1.79 and -1.64 eV, respectively. Upon obtaining the relaxed complexes, the effect of the presence of water solvent on the adsorption process was studied. These findings provide a foundation for developing green anti-corrosive inhibitors for the aluminium surface.

Efficiency of Expired Drugs Used as Corrosion Inhibitors: A Review

Corrosion inhibitors represent one of the most commonly used methods for significantly reducing the corrosion rate of metals and alloys. Adsorption inhibitors have a wide range of applications in cooling water systems, deicing solutions for aircrafts, airports and ways, etching and degreasing solutions, oil pipelines, paints and coatings and metal processing solutions. Adsorption corrosion inhibitors of metals and alloys are generally organic compounds that contain structures with heteroatoms (N, P, S, As, O) in their molecules, having lone pair electrons or π electrons in aromatic rings or multiple bonds. They enable relatively strong interactions between the metal atoms and organic molecules, resulting in a protective layer of organic molecules adsorbed at the metal-corrosive solution interface. Most molecules of active substances from drugs contain similar structures, which is why many drugs have been already tested as corrosion inhibitors. One of the major disadvantages of using drugs for this purpose is their particularly high price. To overcome this impediment, the possibility of using expired drugs as corrosion inhibitors has been investigated since 2009. The present paper is an exhaustive compilation of the scientific published papers devoted to the use of expired drugs as corrosion inhibitors in various aggressive solutions. The inhibitory efficiencies of expired drugs are presented as a function of the studied metal or alloy and the nature of the aggressive solution, as well as the concentration of the inhibitor in such a solution. Research has especially been focused on mild and carbon steel and less on stainless steel, as well as on some metals such as copper, zinc, nickel, tin and aluminum and its alloys. The experimental methods used to assess the inhibitory efficiencies of expired drugs are briefly discussed. Also, the available information on the stability of the active substances in the drugs is presented, although most authors were not concerned with this aspect. Finally, several actions are revealed that must be undertaken by researchers so that the results obtained in the study of the anticorrosive action of expired drugs can be applied at the industrial level and not remain only an academic concern.