Functionalized silica nanotubes with azo-chromophore for enhanced Pd2+ and Co2+ ions monitoring in E-wastes

Fabrication of surface ion imprinting rice husk-based polymer for selective detection and efficient adsorption of Cu2+ in lake water

With the deepening of the concept of recycling economy and green chemistry, selective detection and capture of Cu²⁺ from lake water by biosorbent are of great significance. Herein, the Cu²⁺ ion-imprinted polymers (RH-CIIP) with organosilane containing hydroxyl and Schiff base groups (OHSBG) as ion-receptor, fluorescent chromophores and cross-linking agent, and Cu²⁺ as template ion, were fabricated via surface ion imprinting technology by employing mesoporous silica MCM-41 (RH@MCM-41) as supporter. The RH-CIIP could be exploited as a fluorescent sensor for Cu²⁺ with high selective compared with Cu²⁺ non-imprinted polymers (RH-CNIP). Additionally, the LOD was calculated to be 5.62 μg/L, which is far below WHO standard for Cu²⁺ in drinking water of 2 mg/L, and more lower than the reported methods. Moreover, the RH-CIIP can also be utilized as an adsorbent for the effective elimination of Cu²⁺ from lake water with the adsorption capacity of 87.8 mg/g. Besides, the kinetic features of adsorption were well defined by the pseudo-second-order model and the sorption isotherm was in agreement with the Langmuir model. Meanwhile, the interaction of RH-CIIP and Cu²⁺ was investigated using theoretical calculations and XPS. Finally, RH-CIIP was able to remove almost 99 % Cu²⁺ in lake water samples that satisfied the drink water standard.

Adsorption and Removal of Tetrabromobisphenol A by Adsorption on Functionalized Mesoporous Silica Nanotubes: Isotherms, Kinetics, Thermodynamics, and Optimization via Box-Behnken Design

In pursuit of environmental safety, a novel and efficient method-dispersive solid-phase extraction based on functionalized mesoporous silica nanotubes (FMSNT nanoadsorbent)-was developed to remove tetrabromobisphenol A (TBBPA) from water samples. Characterization and comprehensive analysis of the FMSNT nanoadsorbent, including maximum adsorption capacity of 815.85 mg g^-1 for TBBPA and its water stability, confirmed its potential. Subsequent analysis revealed the impact of multiple factors, for instance pH, concentration, dose, ionic strength, time, and temperature, on the adsorption process. The findings revealed that the adsorption of TBBPA followed the Langmuir and pseudo-second-order kinetics models while primarily driven by hydrogen bond interactions between bromine ions or hydroxyl groups of TBBPA and amino protons around the cavity. The novel FMSNT nanoadsorbent showed high stability and efficiency even after five times of recycling. Moreover, the overall process was identified as chemisorption, endothermic, and spontaneous. Finally, the Box-Behnken design was applied to optimize the results, confirming good reusability even after five cycles.

Multi-responsive paper chemosensors based on mesoporous silica nanospheres for quantitative sensing of heavy metals in water

Exposure to low concentrations of heavy metal cations seriously harms living organisms, hence they are considered environmental toxins. Portable simple detection systems are required for field monitoring of multiple metal ions. In this report, paper-based chemosensors (PBCs) were prepared by adsorbing 1-(pyridin-2-yl diazenyl) naphthalen-2-ol (chromophore), which recognizes heavy metals, onto filter papers coated with mesoporous silica nano spheres (MSNs). The high density of the chromophore probe on the surface of PBCs resulted in ultra-sensitive optical detection of heavy metal ions and short response time. The concentration of metal ions was determined using digital image-based colorimetric analysis (DICA) and compared to spectrophotometry under optimal sensing conditions. The PBCs exhibited stability and short recovery times. The detection limits determined using DICA of Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ were 0.22, 0.28, 0.44, and 0.54 μM; respectively. Additionally, the linear ranges for monitoring Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ were 0.44-4.4, 0.16-4.2, 0.8-8.5, and 0.002-5.2 μM; respectively. The developed chemosensors showed high stability, selectivity, and sensitivity for sensing of Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ in water under optimum conditions and hold potential for low cost, onsite sensing of toxic metals in water.

Enhanced Adsorption and Evaluation of Tetracycline Removal in an Aquatic System by Modified Silica Nanotubes

In the present study, a nanocomposite adsorbent based on mesoporous silica nanotubes (MSNTs) loaded with 3-aminopropyltriethoxysilane (3-APTES@MSNTs) was synthesized. The nanocomposite was employed as an effective adsorbent for the adsorption of tetracycline (TC) antibiotics from aqueous media. It has an 848.80 mg/g maximal TC adsorption capability. The structure and properties of 3-APTES@MSNT nanoadsorbent were detected by TEM, XRD, SEM, FTIR, and N₂ adsorption-desorption isotherms. The later analysis suggested that the 3-APTES@MSNT nanoadsorbent has abundant surface functional groups, effective pore size distribution, a larger pore volume, and a relatively higher surface area. Furthermore, the influence of key adsorption parameters, including ambient temperature, ionic strength, initial TC concentration, contact time, initial pH, coexisting ions, and adsorbent dosage, had also been investigated. The 3-APTES@MSNT nanoadsorbent's ability to adsorb the TC molecules was found to be more compatible with Langmuir isothermal and pseudo-second-order kinetic models. Moreover, research on temperature profiles pointed to the process' endothermic character. In combination with the characterization findings, it was logically concluded that the 3-APTES@MSNT nanoadsorbent's primary adsorption processes involved interaction, electrostatic interaction, hydrogen bonding interaction, and the pore-fling effect. The synthesized 3-APTES@MSNT nanoadsorbent has an interestingly high recyclability of >84.6 percent up to the fifth cycle. The 3-APTES@MSNT nanoadsorbent, therefore, showed promise for TC removal and environmental cleanup.

Functionalized MOF as a Sensitive Spectroscopic Probe for Hg2+, Co2+, and Al3+ Ions Detection in Aqueous Media

A modified metal-organic framework (MOF) named Al-MIL-53-N=SA-Br was synthesized via a Schiff-base reaction between the MOFs (Al-MIL-53-NH₂) and 5-bromo salicylaldehyde. The robust functionalized Al-MIL-53-N=SA-Br was used as a novel spectrophotometric sensor for detecting Hg²⁺, Co²⁺, and Al³⁺ ions. In a wide range of concentrations, the absorption spectral intensity of Al-MIL-53-N=SA-Br increased linearly upon increasing the concentration of Hg²⁺, Co²⁺, and Al³⁺ ions. The limit of detection (LOD) of the proposed Al-MIL-53-N=SA-Br sensor reached 1.52 ppm of Hg²⁺ ion (7.56 × 10^-9 M). Therefore, this study introduces a novel ratiometric Hg²⁺, Co²⁺, and Al³⁺ ions chemosensor. Simple treatment using thiourea or ethylenediaminetetraacetic acid can remove the metal ions from the used sensor and use it many times with a high efficiency. In addition, the Al-MIL-53-N=SA-Br sensor has a high adsorption capacity for these metal ions. The design of the robust Al-MIL-53-N=SA-Br sensor provided high stability, reproducibility, selectivity, high sensitivity, and a facile sensing design. Furthermore, the good absorption spectral stability of Al-MIL-53-N=SA-Br in aqueous media, the broad linear in sensing, and the low LOD of the Hg²⁺, Co²⁺, and Al³⁺ ions show its high potential in determining these ions in real water.

Monitoring of Cobalt and Cadmium in Daily Cosmetics Using Powder and Paper Optical Chemosensors

Daily used cosmetics may contain high levels of heavy metals which are added to improve the quality and shine of cosmetics but represent a threat to human health. In this report, powder- and paper-based optical nanosensors using mesoporous silica nanospheres as carriers were designed for determination of Co²⁺ and Cd²⁺ in commonly used cosmetics. Powder optical chemosensors (POCs) were prepared via direct decoration of optical probes into a porous carrier. Paper-based chemosensors (PBCs) were designed via adsorbing the organic chromophore onto filter papers treated with mesoporous silica. POCs and PBCs were constructed with thick decoration of optical probes, leading to the formation of active surface centers for monitoring of Co²⁺ and Cd²⁺ in cosmetic products. The uniform structures of POCs and PBCs have resulted in selective sensing and low detection limits up to parts per billion, wide detection range determination, and fast response (on the order of seconds). Digital image colorimetric analysis (DICA) was used to quantify the color of PBCs and deduce the corresponding concentrations of Co²⁺ and Cd²⁺ using calibration curves. DICA data correlated well with that obtained from UV-vis spectrophotometry. The developed POCs and PBCs showed wide detection ranges of metal ions and a considerably low detection limit under optimal analysis conditions. The low limit of detection of Co²⁺ and Cd²⁺ ions using POCs was 6.7 × 10^-9 and 3.5 × 10^-9 M, respectively. To the best of our knowledge, this is the first time simple PBCs have been designed for monitoring Co²⁺ and Cd²⁺ with detection limits of 2.2 × 10^-7 and 1.3 × 10^-7 M. A limited amount of manufactured POCs (about 20 mg) were used for all measurements, and commercial filter paper treated with mesoporous nanosphere silica was used for sensing Co²⁺ and Cd²⁺ ions. The developed optical chemosensors had short regeneration times and exhibited high stability and surface functionality and are capable of monitoring Co²⁺ and Cd²⁺ in various cosmetic products.

Spectrophotometric and Fluorometric Methods for the Determination of Fe(III) Ions in Water and Pharmaceutical Samples

Chemical sensors based on mesoporous silica nanotubes (MSNTs) for the quick detection of Fe(III) ions have been developed. The nanotubes' surface was chemically modified with phenolic groups by reaction of the silanol from the silica nanotubes surface with 3-aminopropyltriethoxysilane followed by reaction with 3-formylsalicylic acid (3-fsa) or 5-formylsalicylic acid (5-fsa) to produce the novel nanosensors. The color of the resultant 3-fsa-MSNT and 5-fsa-MSNT sensors changes once meeting a very low concentration of Fe(III) ions. Color changes can be seen by the naked eye and tracked with a smartphone or fluorometric or spectrophotometric techniques. Many experimental studies have been conducted to find out the optimum conditions for colorimetric and fluorometric determining of the Fe(III) ions by the two novel sensors. The response time, for the two sensors, that is necessary to achieve a steady spectroscopic signal was less than 15 s. The suggested methods were validated in terms of the lowest limit of detection (LOD), the lowest limit of quantification (LOQ), linearity, and precision according to International Conference on Harmonization (ICH) guidelines. The lowest limit of detection that was obtained from the spectrophotometric technique was 18 ppb for Fe(III) ions. In addition, the results showed that the two sensors can be used eight times after recycling using 0.1 M EDTA as eluent with high efficiency (90%). As a result, the two sensors were successfully used to determine Fe(III) in a variety of real samples (tap water, river water, seawater, and pharmaceutical samples) with great sensitivity and selectivity.

Preparation of bis-Schiff base immobilized mesoporous SBA-15 nanosensor for the fluorogenic sensing and adsorption of Cu2+

The inorganic−organic chemosensing material (MS-NSP) was developed by anchoring the bis-Schiff base fluorophore onto the channel surface of SBA-15 mesoporous silica surface with a quaternary ammonium linker. The mesostructure, morphology,...

Mesopores silica nanotubes-based sensors for the highly selective and rapid detection of Fe2+ ions in wastewater, boiler system units and biological samples

Mesopores silica nanotubes (MSNTs)-based chemical sensors for the rapid detection and of highly selective Fe²⁺ ions have been prepared. The novel nanosensors were prepared via immobilization of 1,10-phenanthroline-5-amine (PA) and bathophenanthroline (BP) onto the MSNTs. The resultant PA and BP sensors display high sensitivity for detection the Fe²⁺ ions in tap water, river water, sea water, two units in simple cycle power station, and biological samples. More interestingly, upon meeting ultra-trace amount of Fe²⁺ ions, a red complex appears at once. Color changes can be seen from the naked eye and tracked with a smartphone or spectrophotometric techniques. The response time that is necessary to achieve a stable signal was less than 15 s. The Univariate (Univar) calibration technique had been utilized for the determination of figures of merits. The detection limit obtained from the digital image analysis was 19 ppb (7.04 × 10^-7 M) for Fe²⁺ ions, while the obtained from the spectrophotometric method was 6.7 ppb (2.48 × 10^-7 M). Therefore, the two sensors had been successfully used in the determination of Fe²⁺ in several real samples with high sensitivity and selectivity. In addition, they can be used as a simple, rapid, and portable method to detect and quantify the pre rust in any cooler system.