Magnetic-responsive CNT/chitosan composite as stabilizer and adsorbent for organic contaminants and heavy metal removal

Effects of magnesium hydroxide morphology on Pb(ii) removal from aqueous solutions

In this study, magnesium hydroxide (MH) particles with distinct morphologies were obtained through direct precipitation and subsequent hydrothermal treatment with various magnesium salts. The synthesized products were systematically characterized and utilized for the removal of Pb(ii) ions from aqueous solutions. The adsorption process of Pb(ii) by two different MH structures, namely flower globular magnesium hydroxide (FGMH) and hexagonal plate magnesium hydroxide (HPMH), adhered to the Langmuir isotherm and pseudo-second-order model. FGMH exhibited higher Pb(ii) removal capacity (2612 mg g-1) than HPMH (1431 mg g-1), attributable to the unique three-dimensional layered structures of FGMH that provide a larger surface area and abundant active sites. Additionally, metallic Pb was obtained by recycling the adsorbed Pb(ii) through acid dissolution-electrolysis. Furthermore, Pb(ii) removal mechanisms were investigated by analyzing adsorption kinetics and isotherms, and the adsorbed products were characterized. Based on the findings, the removal process occurs in two key stages. First, Pb(ii) ions bind with OH- ions on the surface upon diffusing to the MH surface, resulting in Pb(OH)2 deposits in situ. Concurrently, Mg(ii) ions diffuse into the solution, substituting Pb(ii) ions in the MH lattice. Second, the resultant Pb(OH)2, which is unstable, reacts with CO2 dissolved in water to yield Pb3(CO3)2(OH)2. Therefore, owing to its outstanding Pb(ii) adsorption performance and simple preparation method, FGMH is a promising solution for Pb(ii) pollution.

Effective triclosan removal by using porous aromatic frameworks in continuous fixed-bed column studies

Triclosan (TCS) has been regarded as an emerging contaminant in aquatic systems, making its efficient removal of great significance. In this study, NPVMo@iPAF-1, with a specific surface area of 665 m2/g, was prepared by incorporating (NH4)5H6PV8Mo4O40 into porous aromatic frameworks (PAF). The maximum adsorption capacity of TCS on NPVMo@iPAF-1 reached 917.1 mg/g, as calculated from the Langmuir model. Fixed-bed columns packed with NPVMo@iPAF-1 were employed for TCS removal; the experiment data strongly correlated with the Thomas and Yoon-Nelson models under different operational conditions. Pore preservation, electrostatic effects, and the synergistic effect of π-π interactions contributed to the effective adsorption of TCS onto NPVMo@iPAF-1. The NPVMo@iPAF-1 fixed-bed column could be effectively regenerated through in-situ ozonation for more than 10 regeneration cycles. NPVMo@iPAF-1 turned out to be a promising adsorbent for removing TCS not only from pure water but also from reclaimed water and surface water samples.

Facile fabrication of Fe3O4@Mg(OH)2 magnetic composites and their application in Cu(ii) ion removal

In this study, we fabricated magnetic Fe3O4@Mg(OH)2 composites through the seed deposition technique to achieve Cu(ii) ion removal from aqueous solutions. As indicated by the characterization results, three-dimensional flower-like spheres composed of external Mg(OH)2 were formed, with nano-Fe3O4 particles uniformly embedded in the "flower petals" of the spheres. The efficacy of Fe3O4@Mg(OH)2-3 in Cu(ii) ion removal was examined through batch experiments. The impact of solution pH on removal efficiency was examined, and the pseudo-second-order model and the Langmuir model provided good fits to the adsorption kinetics and isotherm data, respectively. Remarkably, Fe3O4@Mg(OH)2-3 exhibited a significant removal capacity of 1051.65 mg g-1 for Cu(ii) ions. Additionally, the composite displayed a notable saturation magnetization value of 17.3 emu g-1, facilitating isolation from sample solutions through external magnetic fields after Cu(ii) ion absorption. At the solid-liquid interface, a mechanism involving ion exchange between Mg(ii) and Cu(ii) cations was realized as the mode of Cu(ii) ion removal. The composites' effective adsorption properties and rapid magnetic separation highlighted their suitability for use in treating copper-contaminated water.

Polymer-Based Conductive Nanocomposites for the Development of Bioanodes Using Membrane-Bound Enzyme Systems of Bacteria Gluconobacter oxydans in Biofuel Cells

The development of biofuel cells (BFCs) currently has high potential since these devices can be used as alternative energy sources. This work studies promising materials for biomaterial immobilization in bioelectrochemical devices based on a comparative analysis of the energy characteristics (generated potential, internal resistance, power) of biofuel cells. Bioanodes are formed by the immobilization of membrane-bound enzyme systems of Gluconobacter oxydans VKM V-1280 bacteria containing pyrroloquinolinquinone-dependent dehydrogenases into hydrogels of polymer-based composites with carbon nanotubes. Natural and synthetic polymers are used as matrices, and multi-walled carbon nanotubes oxidized in hydrogen peroxide vapor (MWCNTox) are used as fillers. The intensity ratio of two characteristic peaks associated with the presence of atoms C in the sp³ and sp² hybridization for the pristine and oxidized materials is 0.933 and 0.766, respectively. This proves a reduced degree of MWCNTox defectiveness compared to the pristine nanotubes. MWCNTox in the bioanode composites significantly improve the energy characteristics of the BFCs. Chitosan hydrogel in composition with MWCNTox is the most promising material for biocatalyst immobilization for the development of bioelectrochemical systems. The maximum power density was 1.39 × 10^-5 W/mm², which is 2 times higher than the power of BFCs based on other polymer nanocomposites.

Magnetic chitosan microspheres: An efficient and recyclable adsorbent for the removal of iodide from simulated nuclear wastewater

The efficient and recyclable magnetic chitosan microspheres (MCMs) were successfully synthesized to remove iodide from nuclear wastewater and characterized through XRD, FTIR, SEM, EDS, VSM, TGA and XPS. The characterization results indicated that the MCMs exhibited smooth spherical morphology and good magnetic properties. The removal potential of MCMs was investigated for iodide (I^-) anions at different conditions. From pH 3 to pH 9, MCMs performed the high I^- removal efficiency (>90%). The maximum I^- removal capacity of MCMs was up to 0.8087 mmol g^-1 at 298 K, well-fitting with the pseudo-second-order and Sips models. Furthermore, the I^- removal efficiency of MCMs still maintained more than 91% after five adsorption-desorption cycles, performing good regeneration and reusability. This study is expected to prompt the MCMs to become an efficient and recyclable biosorbent for iodide removal from nuclear wastewater.

Fluoropolymer Microemulsion: Preparation and Application in Reservoir Wettability Reversal and Enhancing Oil Recovery

Reservoir wettability is an important factor in the process of reservoir reconstruction. Especially in hydrophilic formation, it is easy to cause a water-locked phenomenon. A new type of fluoropolymer microemulsion was prepared by emulsion polymerization, and its structure and properties were characterized. The average particle size in the prepared emulsion was about 2.0 μm. The emulsion had good stability and wettability reversal performance for the storage of 30 days. After the treatment of 2.0 wt % emulsion, the contact angle between the core and water changed from 26 to 128°, the core surface free energy decreased from 66 to 2.6 mN/m, and the saturated water imbibition amount of the core decreased from 1.38 to 0.15 g. The ability of the fluoropolymer microemulsion to enhance oil recovery was evaluated by the visual displacement experiment. The fluoropolymer microemulsion can increase the displacement efficiency by more than 10%. The wettability of the core changed from hydrophilicity to hydrophobicity, and wettability reversal was achieved.

Oxygen vacancy BiO2-x/Bi2WO6 synchronous coupling with Bi metal for phenol removal via visible and near-infrared light irradiation

The introduction of oxygen-defects has been a versatile strategy to enhance photocatalysis efficiency. In this work, a 2D/3D Bi/BiO_2-x/Bi₂WO₆ heterojunction photocatalyst with rich oxygen-defective was in sequence prepared through a facile solvothermal method, which displays favorable photocatalytic activity towards organic contaminants under visible-NIR light irradiation. The enhancement in photocatalytic performance can be attributed to the synergistic effect between oxygen-vacancy-rich heterojunction and the localized surface plasmon resonance induced by metallic Bi. The functional group interaction, surface morphology, crystal structure, element composition, and tuned bandgap were investigated by FT-IR, SEM, Raman shift, ICP-MS, and XPS technique. The spectrum response performance of the photocatalyst was verified by UV-visible DRS analysis. Results of photodegradation experiments toward organic contaminants showed that the prepared photocatalyst can degrade 90% of phenol in 20 mins under visible-NIR light irradiation, both Z-scheme heterojunction and the introduction of Bi metal contribute to the enhancement in the photocatalytic activity. The results of the DFT calculation suggest that the valence band-edge hybridization within BiO_2-x and Bi₂WO₆ can effectively enhance the photocatalytic performance by increasing the migration efficiencies of electron-hole pairs. Moreover, a possible mechanism was proposed on the results of EIS, ESR and GC-MS tests. This work offers a novel insight for synthesizing efficient visible-NIR light photocatalysis by activating the semiconductors with Bi metal.