Highly efficient and fast batch adsorption of orange G dye from polluted water using superb organo-montmorillonite: Experimental study and molecular dynamics investigation

Adsorption Characteristics of Organic Pollutants on Montmorillonites Modified by Quaternary Ammonium Surfactants with Organic Counterions

Na-montmorillonite (Na-Mt) modified by quaternary ammonium surfactants containing different organic counterions [OMt-QAS·Y-, Y = CH3CO3 -, CH3 (CH2)3COO-, CH3CH(OH)COO-, and HCOO-] was prepared for enhancing the adsorption capacity of 2, 4-dichlorophenol/cibacron brilliant yellow 3G-P. Compared with Na-Mt, whose adsorption efficiency for 2,4-dichlorophenol/cibacron brilliant yellow 3G-P was only 58/1.85 mg/g, the adsorption efficiency of OMt-QAS·Y- was greatly improved, with OMt-QAS·CH3CO3 - having the highest adsorption capacity of 152.85/116.17 mg/g. The kinetic and isotherm studies indicate that all adsorption processes fit well to the pseudo-second-order model and Freundlich model, respectively. The hydrophobicity of counterions and their affinity with the aliphatic chains had an effect on the interlayer spacing and point of zero charge of OMt-QAS·Y-, which in turn affected their adsorption properties.

Ionic liquid functionalized binary montmorillonite nanomaterials as water-based lubricant additives for steel/steel contact

Two-dimensional (2D) nanomaterials have attracted much attention for the lubrication enhancement of water. Stably dispersing nanosheets in water for an extended period is a challenging task. 2D montmorillonite (MMT) nanosheets are modified with protonic ionic liquids (PILs) with the assistance of simple and efficient mechanochemical synthesis, which can stably disperse in water. With the help of TEM, FTIR, and XPS characterization, it is further demonstrated that the one-step mechanochemical stirring synthesis method can introduce the anions and cations of PILs into the MMT interlayer simultaneously, which gives the binary-modified MMT nanosheets some of the advantages of PILs, such as designability and functionalization. The successful intercalation and grafting of ionic liquids between the MMT nanosheets made it possible to obtain ultra-thin thickness and micro-nano size of the binary MMT nanosheets, and the synergistic effect of the 2D MMT nanosheets and the PIL laid a good foundation for the realization of the excellent lubricity, the easy-sliding interlayer structure, and the adsorption of the film more easily. Using the modified MMT nanosheets, the coefficient of friction and wear volume can be reduced by 76% and 94% at a high frequency and high load, respectively. The successful intercalation of PILs endows the MMT nanomaterial with better thermal stability and extreme pressure properties, with the maximum bite-free load (PB) being nearly 17 times higher than water. The friction mechanism shows that the enhancement of the lubrication and anti-wear performance is attributed to the boundary adsorbed tribofilm of MMT nanosheets achieving a repairing effect of the friction interfaces, which provides effective lubrication for steel/steel contact, thus preventing further wear of the friction pair surface. This work provides green, economical guidance for developing natural water-based lubricant additives and has great potential in sustainable lubrication.

Enset starch-based biocomposite film reinforced with Ethiopian bentonite clay: Improved mechanical and barrier properties

Improper disposal of traditional plastics leads to the generation of microplastics, resulting in severe pollution of land and oceans and posing a threat to human health and marine ecosystems. Hence, adopting eco-friendly bioplastics, particularly in food packaging, is essential. In this study, Enset starch-based biocomposite films, reinforced with Ethiopian bentonite clay at various ratios (0, 2.5, 5, 7.5 and 10 % w/w) were prepared using solvent casting method. The effect of bentonite clay on biocomposite films on structural, physicochemical, and morphological properties were analyzed. Characterization tests confirmed the even distribution of bentonite, strengthening of bonds, and enhancement of the biocomposite film properties. The biocomposite film with 5 wt% bentonite clay incorporation into enset starch exhibits optimal performance; maximum strength (increased by 132 %), less water solubility (reduction in 33 %), reduction in water vapor permeability (decreased by 42 %), and better compatibility in the morphologies attributed by the intercalated silicate layer. This study highlights the effectiveness of bentonite clay in enhancing enset starch biocomposite properties, offering a promising eco-friendly solution for biodegradable food packaging and promoting sustainable resource utilization.

Stable loading of MOF-derived carbon skeleton encapsulated Ni and BiOBr on carbonized cellulose fibers for fabricating high-performance and recyclable photocatalytic paper

The highly dispersed small-size metal co-catalysts can effectively improve the photocatalytic efficiency of semiconductor photocatalysts by separating photogenerated electrons and enriching active sites. However, this system tends to aggregate in the absence of carrier, resulting in the decrease of active sites. Here, MOF-derived carbon skeleton (MDCS) encapsulated Ni nanoparticles (Ni@MDCS) and BiOBr was loaded onto carbonized cellulose fibers (CCF) with the help of polydopamine (PDA) to construct high-performance and recyclable photocatalytic paper for photocatalytic degradation of organic dyes in water. The characterization results showed that MDCS promoted good dispersion of Ni nanoparticles and provided sufficient active sites. And Ni@MDCS as a co-catalyst accelerated the separation of photogenerated carriers in BiOBr. The PDA improved the loading state of Ni@MDCS on CCF and converted into N-doped C in the carbonization process for further increasing the transfer efficiency of photogenerated electrons. In the composite paper, the stable loading of Ni@MDCS/BiOBr hybrid on CCF improved the dispersion and reusability of photocatalyst. The degradation rate of rhodamine B on CCF/PDA-C/Ni@MDCS/BiOBr paper was as high as 94.6 % after 60 min visible light irradiation, which was about 2.5 times higher than that of CCF/BiOBr paper. During 10 cycles, CCF/PDA-C/Ni@MDCS/BiOBr paper maintained high photocatalytic efficiency and good structural stability. This study provides a new way for developing high-performance and recyclable photocatalytic paper.

Molecular simulation-based insights into dye pollutant adsorption: A perspective review

Growing concerns about environmental pollution have highlighted the need for efficient and sustainable methods to remove dye contamination from various ecosystems. In this context, computational methods such as molecular dynamics (MD), Monte Carlo (MC) simulations, quantum mechanics (QM) calculations, and machine learning (ML) methods are powerful tools used to study and predict the adsorption processes of dyes on various adsorbents. These methods provide detailed insights into the molecular interactions and mechanisms involved, which can be crucial for designing efficient adsorption systems. MD simulations, detailing molecular arrangements, predict dyes' adsorption behaviour and interaction energies with adsorbents. They simulate the entire adsorption process, including surface diffusion, solvent layer penetration, and physisorption. QM calculations, especially density functional theory (DFT), determine molecular structures and reactivity descriptors, aiding in understanding adsorption mechanisms. They identify stable adsorption configurations and interactions like hydrogen bonding and electrostatic forces. MC simulations predict equilibrium properties and adsorption energies by sampling molecular configurations. ML methods have proven highly effective in predicting and optimizing dye adsorption processes. These models offer significant advantages over traditional methods, including higher accuracy and the ability to handle complex datasets. These methods optimize adsorption conditions, clarify adsorbent functionalization roles, and predict dye removal efficiency under various conditions. This research explores MD, MC, QM, and ML approaches to connect molecular interactions with macroscopic adsorption phenomena. Probing these techniques provides insights into the dynamics and energetics of dye pollutants on adsorption surfaces. The findings will aid in developing and optimizing new materials for dye removal. This review has significant implications for environmental remediation, offering a comprehensive understanding of adsorption at various scales. Merging microscopic data with macroscopic observations enhances knowledge of dye pollutant adsorption, laying the groundwork for efficient, sustainable removal technologies. Addressing the growing challenges of ecosystem protection, this study contributes to a cleaner, more sustainable future.

High efficiency of treated-phengite clay by sodium hydroxide for the Congo red dye adsorption: Optimization, cost estimation, and mechanism study

Wastewater textile dye treatment is a challenge that requires the development of eco-friendly technology to avoid the alarming problems associated with water scarcity and health-environment. This study investigated the potential of phengite clay as naturally low-cost abundant clay from Tamgroute, Morocco (TMG) that was activated with a 0.1 M NaOH base (TMGB) after calcination at 850 °C for 3 h (TMGC) before its application in the Congo red (CR) anionic dye from the aqueous solution. The effect of various key operational parameters: adsorbent dose, contact time, dye concentration, pH, temperature, and the effect of salts, was studied by a series of adsorption experiments in a batch system, which affected the adsorption performance of TMG, TMGC, and TMGB for CR dye removal. In addition, the properties of adsorption kinetics, isotherms, and thermodynamics were also studied. Experimental results showed that optimal adsorption occurred at an acidic pH. At a CR concentration of 100 mg L-1, equilibrium elimination rates were 68%, 38%, and 92% for TMG, TMGC, and TMGB, respectively. The adsorption process is rapid, follows pseudo-second-order kinetics, and is best described by a Temkin and Langmuir isotherm. The thermodynamic parameters indicated that the adsorption of CR onto TMGB is endothermic and spontaneous. The experimental values of CR adsorption on TMGB are consistent with the predictions of the response surface methodology. These led to a maximum removal rate of 99.97% under the following conditions: pH = 2, TMGB dose of 7 g L-1, and CR concentration of 50 mg L-1. The adsorbent TMGB's relatively low preparation cost of around $2.629 g-1 and its ability to regenerate in more than 6 thermal calcination cycles with a CR removal rate of around 56.98%, stimulate its use for textile effluent treatment on a pilot industrial scale.

Eco-friendly engineering of micro composite-based hydroxyapatite bio crystal and polyaniline for high removal of OG dye from wastewater: Adsorption mechanism and RSM@BBD optimization

The presence of harmful substances such as dyes in water systems poses a direct threat to the quality of people's lives and other organisms living in the ecosystem. Orange G (OG) is considered a hazardous dye. The existing paper attempts to evaluate a low-cost adsorbent for the effective removal of OG dye. The developed adsorbent Polyaniline@Hydroxyapatite extracted from Cilus Gilberti fish Scale (PANI@FHAP) was elaborated through the application of the in situ chemical polymerization method to incorporate PANI on the surface of naturally extracted hydroxyapatite FHAP. The good synthesis of PANI@FHAP was evaluated through multiple techniques including X-ray diffraction (XRD), Scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM/EDS), Fourier Transforms Infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) coupled with thermal differential analysis (DTA) analysis. The results reveal a highly ordered disposition of PANI chains on FHAP, resulting in a well-coated FHAP in the PANI matrix. Furthermore, the presence of functional groups on the surface of PANI such as amine (-NH2) and imine (=NH) groups would facilitate the removal of OG dye from contaminated water. The adsorption of OG onto PANI@FHAP was conducted in batch mode and optimized through response surface methodology coupled with box-Behnken design (RSM/BBD) to investigate the effect of time, adsorbent dose, and initial concentration. The outcomes proved that OG adsorption follows a quadratic model (R2 = 0.989). The kinetic study revealed that the adsorption of OG fits the pseudo-second-order model. On the other hand, the isotherm study declared that the Freundlich model is best suited to the description of OG adsorption. For thermodynamic study, the adsorption of OG is spontaneous in nature and exothermic. Furthermore, the regeneration-reusability study indicates that PANI@FHAP could be regenerated and reused up to five successive cycles. Based on the FTIR spectrum of PANI@FHAP after OG adsorption, the mechanism governing OG adsorption is predominantly driven by π-π interaction, electrostatic interaction, and hydrogen bonding interactions. The obtained results suppose that PANI@FHAP adsorbent can be a competitive material in large-scale applications.

Synthesis and Dye Adsorption Dynamics of Chitosan-Polyvinylpolypyrrolidone (PVPP) Composite

One major environmental issue responsible for water pollution is the presence of dyes in the aquatic environment as a result of human activity, particularly the textile industry. Chitosan-Polyvinylpolypyrrolidone (PVPP) polymer composite beads were synthesized and explored for the adsorption of dyes (Bismarck brown (BB), orange G (OG), brilliant blue G (BBG), and indigo carmine (IC)) from dye solution. The CS-PVPP beads demonstrated high removal efficiency of BB (87%), OG (58%), BBG (42%), and IC (49%). The beads demonstrated a reasonable surface area of 2.203 m2/g and were negatively charged in the applicable operating pH ranges. TGA analysis showed that the polymer composite can withstand decomposition up to 400 °C, proving high stability in harsh conditions. FTIR analysis highlighted the presence of N-H amine, O-H alcohol, and S=O sulfo groups responsible for electrostatic interaction and hydrogen bonding with the dye molecules. A shift in the FTIR bands was observed on N-H and C-N stretching for the beads after dye adsorption, implying that adsorption was facilitated by hydrogen bonding and Van der Waals forces of attraction between the hydroxyl, amine, and carbonyl groups on the surface of the beads and the dye molecules. An increase in pH increased the adsorption capacity of the beads for BB while decreasing OG, BBG, and IC due to their cationic and anionic nature, respectively. While an increase in temperature did not affect the adsorption capacity of OG and BBG, it significantly improved the removal of BB and IC from the dye solution and the adsorption was thermodynamically favoured, as demonstrated by the negative Gibbs free energy at all temperatures. Adsorption of dye mixtures followed the characteristic adsorption nature of the individual dyes. The beads show great potential for applications in the treatment of dye wastewater.

Facile synthesis of lignin-based Fe-MOF for fast adsorption of methyl orange

To rapidly remove dyes from wastewater, iron-based metal-organic frameworks modified with phenolated lignin (NH2-MIL@L) were prepared by a one-step hydrothermal method. Analyses of the chemical structure and adsorption mechanism of the NH2-MIL@L proved the successful introduction of lignin and the enhancement of its adsorption sites. Compared with NH2-MIL-101-Fe without phenolated lignin, the modification with lignin increased the methyl orange (MO) adsorption rate of NH2-MIL@L. For the best adsorbent, NH2-MIL@L4, the MO adsorption efficiency in MO solution reached 95.09% within 5 min. NH2-MIL@L4 reached adsorption equilibrium within 90 min, exhibiting an MO adsorption capacity of 195.31 mg/g. The process followed pseudo-second-order kinetics and the Dubinin-Radushkevich model. MO adsorption efficiency of NH2-MIL@L4 was maintained at 89.87% after six adsorption-desorption cycles. In mixed solutions of MO and methylene blue (MB), NH2-MIL@L4 achieved an MO adsorption of 94.02% at 5 min and reached MO adsorption equilibrium within 15 min with an MO adsorption capacity of 438.6 mg/g, while the MB adsorption equilibrium was established at 90 min with an MB adsorption rate and capacity of 95.60% and 481.34 mg/g, respectively. NH2-MIL@L4 sustained its excellent adsorption efficiency after six adsorption-desorption cycles (91.2% for MO and 93.4% for MB). The process of MO adsorption by NH2-MIL@L4 followed the Temkin model and pseudo-second-order kinetics, while MB adsorption followed the Dubinin-Radushkevich model and pseudo-second-order kinetics. Electrostatic interactions, π-π interactions, hydrogen bonding, and synergistic interactions affected the MO adsorption process of NH2-MIL@L4.

Gemini Quaternary Ammonium Surfactants with Different Counterions-modified Montmorillonite for Efficient Removal of Methyl Orange

Organic Na-montmorillonite (OMt-12-2-12·2Y - , Y=CH 3 CO 3 - , C 6 H 5 COO - and Br - ) modified by a series of Gemini quaternary ammonium surfactants with different counterions was prepared for enhancing the adsorption capacity of methyl orange. Compared with the initial adsorption capacity of 5.251 mg/g of Na-Mt, the adsorption effect of OMts under the optimal conditions increased by about 31~34 times. The adsorption isotherms and kinetics of all adsorption processes were respectively described by Langmuir and pseudo-second-order models. The structure, hydrophobicity and hydration of the counterions, as well as the affinity of the counterions with the long aliphatic chains, had a certain influence on the adsorption performance of OMts for methyl orange.

Schiff base crosslinked graphene/oxidized nanofibrillated cellulose/chitosan foam: An efficient strategy for selective removal of anionic dyes

A versatile foam based on Schiff base crosslinking of oxidized nanofibrillated cellulose (ONFC) with amino modified graphene oxide (NGO) and chitosan (CS) was prepared for the efficacious selective removal of anionic dyes. (3-aminopropyl) triethoxysilane (APTES) was employed as a surface modifier to yield an amino modified graphene oxide (NGO). Meanwhile, ONFC was obtained via a periodate oxidation process to produce dialdehyde groups. Thus, the Schiff base crosslinking of ONFC with NGO and CS enabled to be readily accomplished, producing a versatile NGO/ONFC/CS foam. Systematical characterizations confirmed the successful covalent crosslinking and formation of NGO/ONFC/CS foams. Selective adsorption of Allura Red (AR) and orange G (OG) over cationic dye methylene blue (MB) by NGO/ONFC/CS was confirmed. It was found the maximum adsorption capacities of AR and OG at 303 K were 416.7 and 300.5 mg g-1, while it was 14.60 mg g-1 for MB. Thus, the new Schiff base crosslinked NGO/ONFC/CS paves the way for developing versatile graphene based foams in the applications of water treatment.

Removal of Methylene Blue from Aqueous Solutions by Surface Modified Talc

In this study, raw talc powder surface modification was conducted, and the powder was modified in two different methods using acid washing and ball milling. Modified talc was characterized by X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). In order to investigate the adsorption capacity of modified talc on dyes, adsorption experiments were carried out with methylene blue (MB) in aqueous solutions as the target contaminant. The findings of the characterization revealed that both modifications increased the adsorption capacity of talc, which was attributed to changes in specific surface area and active groups. The influence of process parameters such as contact time, pH, dye concentration, and adsorbent dosage on the adsorption performance was systematically investigated. Modified talc was able to adsorb MB rapidly, reaching equilibrium within 60 min. Additionally, the adsorption performance was improved as the pH of the dye solution increased. The isotherms for MB adsorption by modified talc fitted well with the Langmuir model. The pseudo-second-order model in the adsorption kinetic model properly described the adsorption behavior. The results show that the modified talc can be used as an inexpensive and abundant candidate material for the adsorption of dyes in industrial wastewater.

Organo-Montmorillonite Modified by Gemini Quaternary Ammonium Surfactants with Different Counterions for Adsorption toward Phenol

The discharge of industrial phenol pollutants causes great harm to the natural environment and human health. In this study, phenol removal from water was studied via the adsorption of Na-montmorillonite (Na-Mt) modified by a series of Gemini quaternary ammonium surfactants with different counterions [(C₁₁H₂₃CONH(CH₂)₂N⁺ (CH₃)₂(CH₂)₂ N⁺(CH₃)₂ (CH₂)₂NHCOC₁₁H₂₃·2Y^-, Y = CH₃CO₃^-, C₆H₅COO^- and Br^-, 12-2-12·2Y^-]. The results of the phenol adsorption indicated that MMt-12-2-12·2Br^-, MMt-12-2-12·2CH₃CO₃^- and MMt-12-2-12·2C₆H₅COO^- reached the optimum adsorption capacity, which was 115.110 mg/g, 100.834 mg/g and 99.985 mg/g, respectively, under the conditions of the saturated intercalation concentration at 2.0 times that of the cation exchange capacity (CEC) of the original Na-Mt, 0.04 g of adsorbent and a pH = 10. The adsorption kinetics of all adsorption processes were in good agreement with the pseudo-second-order kinetics model, and the adsorption isotherm was better modeled by Freundlich isotherm. Thermodynamic parameters revealed that the adsorption of phenol was a physical, spontaneous and exothermic process. The results also showed that the counterions of the surfactant had a certain influence on the adsorption performance of MMt for phenol, especially the rigid structure, hydrophobicity, and hydration of the counterions.

Modified Bamboo Charcoal as a Bifunctional Material for Methylene Blue Removal

Biomass-derived raw bamboo charcoal (BC), NaOH-impregnated bamboo charcoal (BC-I), and magnetic bamboo charcoal (BC-IM) were fabricated and used as bio-adsorbents and Fenton-like catalysts for methylene blue removal. Compared to the raw biochar, a simple NaOH impregnation process significantly optimized the crystal structure, pore size distribution, and surface functional groups and increase the specific surface area from 1.4 to 63.0 m²/g. Further magnetization of the BC-I sample not only enhanced the surface area to 84.7 m²/g, but also improved the recycling convenience due to the superparamagnetism. The maximum adsorption capacity of BC, BC-I, and BC-IM for methylene blue at 328 K was 135.13, 220.26 and 497.51 mg/g, respectively. The pseudo-first-order rate constants k at 308 K for BC, BC-I, and BC-IM catalytic degradation in the presence of H₂O₂ were 0.198, 0.351, and 1.542 h^-1, respectively. A synergistic mechanism between adsorption and radical processes was proposed.

Combined molecular dynamics simulations and experimental studies of the removal of cationic dyes on the eco-friendly adsorbent of activated carbon decorated montmorillonite Mt@AC

In recent years, the combination of experimental and theoretical study to explain adsorbate/adsorbent interactions has attracted the attention of researchers. In this context, this work aims to study the adsorption of two cationic dyes, namely methylene blue (MB) and crystal violet (CV), on a green adsorbent Montmorillonite@activated carbon (Mt@AC) composite and to explain the adsorption behavior of each dye by the molecular dynamics (MD) simulation method. The eco-friendly nanocomposite Mt@AC is synthesized and characterized by the analysis methods: XRD, FTIR, BET, TGA/DTA, SEM-EDS, EDS-mapping and zeta potential. The experimental results of adsorption equilibrium show that the adsorption of the two dyes is well suited to the Langmuir adsorption model. The maximum adsorption capacity of the two dyes reaches 801.7 mg g^-1 for methylene blue and 1110.8 mg g^-1 for crystal violet. The experimental kinetics data fit well with a pseudo-first order kinetic model for the two dyes with coefficient of determination R ² close to unity, non-linear chi-square χ ² close to zero and lower Root Mean Square Error RMSE (R ² → 1 and χ ² → 0, RMSE lower). Molecular dynamic simulations are run to gain insights on the adsorption process. According to the RDF analysis and interaction energy calculations, the obtained results reveal a better affinity of the CV molecule with both the AC sheet and montmorillonite framework as compared with MB. This finding suggests that CV is adsorbed to a larger extent onto the nanocomposite material which is in good agreement with the adsorption isothermal experiment observations.

Core-Shell Fe3O4@C Nanoparticles for the Organic Dye Adsorption and Targeted Magneto-Mechanical Destruction of Ehrlich Ascites Carcinoma Cells

The morphology, structure, and magnetic properties of Fe₃O₄ and Fe₃O₄@C nanoparticles, as well their effectiveness for organic dye adsorption and targeted destruction of carcinoma cells, were studied. The nanoparticles exhibited a high magnetic saturation value (79.4 and 63.8 emu/g, correspondingly) to facilitate magnetic separation. It has been shown that surface properties play a key role in the adsorption process. Both types of organic dyes-cationic (Rhodomine C) and anionic (Congo Red and Eosine)-were well adsorbed by the Fe₃O₄ nanoparticles' surface, and the adsorption process was described by the polymolecular adsorption model with a maximum adsorption capacity of 58, 22, and 14 mg/g for Congo Red, Eosine, and Rhodomine C, correspondingly. In this case, the kinetic data were described well by the pseudo-first-order model. Carbon-coated particles selectively adsorbed only cationic dyes, and the adsorption process for Methylene Blue was described by the Freundlich model, with a maximum adsorption capacity of 14 mg/g. For the case of Rhodomine C, the adsorption isotherm has a polymolecular character with a maximum adsorption capacity of 34 mg/g. To realize the targeted destruction of the carcinoma cells, the Fe₃O₄@C nanoparticles were functionalized with aptamers, and an experiment on the Ehrlich ascetic carcinoma cells' destruction was carried out successively using a low-frequency alternating magnetic field. The number of cells destroyed as a result of their interaction with Fe₃O₄@C nanoparticles in an alternating magnetic field was 27%, compared with the number of naturally dead control cells of 6%.

Green Synthesis of Fe3O4 Nanoparticles and Its Applications in Wastewater Treatment

In this paper, the extract of Citrus aurantium (CA) was used as a green approach for the preparation of Fe3O4 nanoparticles. The green Fe3O4 (Fe3O4/CA) was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy analysis (EDX), Fourier-transform infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) surface area measurement, and vibrating sample magnetometry (VSM). The synthesized Fe3O4/CA was used to remove methylene blue (MB) dye from an aqueous solution. A four-factor central composite design (CCD), combined with response surface modeling (RSM), was used to maximize the MB dye removal. The four independent variables, which were initial dye concentration (10–50 mg/L), solution pH (3–9), adsorbent dose (ranging from 200–1000 mg/L), and contact time (30–90 min), were used as inputs to the model of the perecentage dye removal. The results yielded by an analysis of variance (ANOVA) confirmed the high significance of the regression model. The predicted values of the MB dye removal were in agreement with the corresponding experimental values. Optimized conditions for the maximum MB dye removal (93.14%) by Fe3O4/CA were the initial dye concentration (10.02 mg/L), pH (8.98), adsorbent mass (997.99 mg/L), and contact time (43.71 min). The validity of the quadratic model was examined, and good agreement was found between the experimental and predicted values. Our findings demonstrated that green Fe3O4NPs is a good adsorbent for MB removal.

Experimental and modeling investigation of organic modified montmorillonite with octyl quaternary ammonium salt

The sodium montmorillonite was organic modified with three kinds of quaternary ammonium salts containing 1 to 3 octyl chains, and then the organic montmorillonite was studied by FT-IR, XRD, and TG characterization as well as Monte Carlo simulations, to explore the influence of the number of octyl chains and the loading of intercalated cations on the basal spacing (d₀₀₁) of the modified montmorillonite complexes. According to the distribution of intercalated quaternary ammonium cations and the energy change of the montmorillonite complexes, a reasonable explanation was given for the enlargement of the interlayer space. The results of experimental characterization and Monte Carlo simulations show that all the three intercalation agents can enlarge the interlayer space of montmorillonite complexes. The more the number of octyl chains in the salt, the more significant expanding effect on the interlayer space. The three intercalation cations exhibited a distribution arranged from mono-layered to multi-layered structure as the loading of intercalated cations increases.

Activation of peroxymonosulfate by α-MnO2 for Orange Ⅰ removal in water

Developing high-efficiency catalysts for peroxymonosulfate (PMS)-based advanced oxidation processes is important for eliminating pollutants in water. Herein, α-MnO₂ with major exposed {110} and {100} facets prepared via a hydrothermal method were used as catalysts to activate PMS for the degradation of Orange Ⅰ (OⅠ). α-MnO₂-100, with more abundant surface hydroxyl groups and greater reductive ability, performed remarkably better than α-MnO₂-110 for degrading OⅠ. OⅠ removal of 86.20% was obtained in the α-MnO₂-100/PMS system. The apparent rate constant of OⅠ removal over α-MnO₂-100 was 2.11 times higher than that of α-MnO₂-110. The effects of PMS concentration, catalyst dosage, OⅠ concentration, initial pH, anions and humic acid (HA) on OⅠ degradation in the α-MnO₂-100/PMS system were systematically investigated. Quenching experiments and electron paramagnetic resonance (EPR) demonstrated that SO₄^•-, •OH, O₂^•- and ¹O₂ were the reactive oxygen species (ROS) in the α-MnO₂-100/PMS system. Moreover, the possible degradation pathway of OⅠ in the α-MnO₂-100/PMS system was proposed. This work provides an ideal metal oxide catalyst for sewage remediation.

Silk Sericin Enrichment through Electrodeposition and Carbonous Materials for the Removal of Methylene Blue from Aqueous Solution

The recycling and reuse of biomass waste for the preparation of carbon-based adsorbents is a sustainable development strategy that has a positive environmental impact. It is well known that a large amount of silk sericin (SS) is dissolved in the wastewater from the silk industry. Utilizing the SS instead of discharging it into the environment without further treatment would reduce environmental and ecological problems. However, effective enrichment of the SS from the aqueous solution is a challenge. Here, with the help of carboxymethyl chitosan (CMCS), which can form a gel structure under low voltage, an SS/CMCS hydrogel with SS as the major component was prepared via electrodeposition at a 3 V direct-current (DC) voltage for five minutes. Following a carbonization process, an SS-based adsorbent with good performance for the removal of methylene blue (MB) from an aqueous solution was prepared. Our results reveal that the SS/CMCS hydrogel maintains a porous architecture before and after carbonization. Such structure provides abundant adsorption sites facilitating the adsorption of MB molecules, with a maximum adsorptive capacity of 231.79 mg/g. In addition, it suggests that the adsorption is an exothermic process, has a good fit with the Langmuir model, and follows the intra-particle diffusion model. The presented work provides an economical and feasible path for the treatment of wastewater from dyeing and printing.

Green construction of eco-friendly phosphotungstic acid Sr-MOF catalysts for crystal violet removal and synthesis of coumarin and xanthene compounds

There is an urgent need to improve engineering and synthetic chemistry, either through the use of eco-friendly starting materials or the proper design of novel synthesis routes. This reduces the contamination of toxic chemicals and helps the disposal of organic dyes. In the current work, a metal–organic framework-based Sr(ii) was fabricated to achieve the desired goal for dye removal and catalysis. Sr-MOF-based phosphotungstic acid (PWA/Sr-MOF) was hydrothermally synthesized to study its adsorption and catalytic activities. Remarkably, about 99.9% of crystal violet (CV) dye was removed using PWA/Sr-MOF within 90 min at room temperature. Various factors have been studied to investigate the optimum conditions such as pH of solution, initial dye concentration, contact time, and temperature. The maximum adsorption capacity of CV dye was reached after 90 min and well fitted the pseudo-second kinetic order and Langmuir adsorption isotherm. Coumarin and xanthene reactions were chosen to test the catalytic activity of the prepared PWA/Sr-MOF at 373 K. Furthermore, structural and chemical characterization of the fabricated samples was obtained using FT-IR, XRD, TGA, DTA, TEM, EDX, and XPS. PWA/Sr-MOF can be considered as a promising and green framework in the material design used to study catalytic and adsorption performances.

There is an urgent need to improve engineering and synthetic chemistry, either through the use of eco-friendly starting materials or the proper design of novel synthesis routes.