Fabrication of hydroxyapatite embedded cerium-organic frameworks for fluoride capture from water

Efficient adsorption of phosphorus by macroscopic MOF/chitosan composites and preliminary investigation of subsequent phosphorus recovery through electrochemically-driven struvite precipitation

The proper management of phosphorus (P) from wastewater is crucial for sustainable development consideration. Herein, we developed a strategy which combines adsorption via tailored adsorbents and electrochemically-driven struvite precipitation (ESP) for P recovery. Novel polydopamine-modified Ce-MOF/chitosan composite beads (PDA@Ce-MOF-CS) were prepared by a facile in situ growth of Ce-MOF crystals incorporated natural polymers and PDA coating. The physicochemical properties of PDA@Ce-MOF-CS were characterized. Both batch and fixed-bed column experiments were conducted to evaluate its adsorption performances. Representatively, PDA@Ce-MOF-CS performed good selectivity for P removal and exhibited a maximum adsorption capacity of 161.13 mg P/g at pH 3 and 318 K. Meanwhile, the developed adsorbent showed great reusability after ten regeneration cycles as well as good adsorption stability. The dominant mechanism for efficient P adsorption included electrostatic attraction, surface precipitation and ligand exchange. Interestingly, PDA@Ce-MOF-CS exhibited a remarkable adsorption capacity of 92.86 mg P/g by treating real P-rich electroplating wastewater, and the desorbed P in the eluate could be effectively recovered and converted into a solid fertilizer as struvite via ESP. Overall, this work provided a new research direction for P recovery from wastewater as struvite by combined technologies with the help of macroscopic MOF architectures.

Facile preparation, characterization and application of novel sugarcane bagasse-derived nanoceria-biochar for defluoridation of drinking water: kinetics, thermodynamics, reusability and mechanism

Although expensive, rare-earth oxides are well known for being powerful defluoridation agents. Being costlier, cerium is used as a hybrid adsorbent in conjunction with a prudent and environmentally benign substance like biochar. The novel CeO2/BC (surface area 260.05 m2/g) composite was shaped using the facile chemical precipitation technique without any cross-linkers. Surface properties of synthesised CeO2/BC were investigated using powder XRD, FTIR, BET, pH point of zero charge and SEM. According to XRD analysis, immobilized Ce is primarily in form of CeO2, while pristine biochar is in an amorphous state. Batch mode adsorption tests were carried out with different solution pH, F- initial concentration, adsorbent dosage and contact time and counter anions. CeO2/BC can be used in a varied pH range (2-10) but shows maximum removal at pH 4. The Langmuir adsorption isotherm and a pseudo-second-order kinetic model are best fitted to support the adsorption process with a maximum Langmuir adsorption capacity of 16.14 mg/g (F- concentration 5 to 40 mg/L). The removal phenomenon is non-spontaneous in nature. The plausible mechanism of fluoride uptake was explained using XPS and pHPZC, and it was demonstrated that the fluoride was mainly removed by ion exchange and electrostatic attraction. The adsorbent could be successfully used up to fourth cycle after regenerating.

Performance of Rod-Shaped Ce Metal-Organic Frameworks for Defluoridation

The performance of a Ce(III)-4,4',4″-((1,3,5-triazine-2,4,6-triyl) tris (azanediyl)) tribenzoic acid-organic framework (Ce-H3TATAB-MOFs) for capturing excess fluoride in aqueous solutions and its subsequent defluoridation was investigated in depth. The optimal sorption capacity was obtained with a metal/organic ligand molar ratio of 1:1. The morphological characteristics, crystalline shape, functional groups, and pore structure of the material were analyzed via SEM, XRD, FTIR, XPS, and N₂ adsorption-desorption experiments, and the thermodynamics, kinetics, and adsorption mechanism were elucidated. The influence of pH and co-existing ions for defluoridation performance were also sought. The results show that Ce-H3TATAB-MOFs is a mesoporous material with good crystallinity, and that quasi-second kinetic and Langmuir models can describe the sorption kinetics and thermodynamics well, demonstrating that the entire sorption process is a monolayer-governed chemisorption. The Langmuir maximum sorption capacity was 129.7 mg g^-1 at 318 K (pH = 4). The adsorption mechanism involves ligand exchange, electrostatic interaction, and surface complexation. The best removal effect was reached at pH 4, and a removal effectiveness of 76.57% was obtained under strongly alkaline conditions (pH 10), indicating that the adsorbent has a wide range of applications. Ionic interference experiments showed that the presence of PO₄^3- and H₂PO₄^- in water have an inhibitory effect on defluoridation, whereas SO₄^2-, Cl^-, CO₃^2-, and NO₃^- are conducive to the adsorption of fluoride due to the ionic effect.

Photoelectrocatalytic oxidation of ethylene glycol on trimetallic PdAgCu nanospheres enhanced by surface plasmon resonance

The notable surface plasmon resonance (SPR) effect of some metals has been applied to improve the efficiency of alcohol oxidation reactions, whereas the comprehensive investigation of Cu-assisted photoelectrocatalysis remains challenging. We herein successfully prepared trimetallic PdAgCu nanospheres (NSs) with abundant surface bulges for the advanced ethylene glycol oxidation reaction (EGOR) and compared them with bimetallic PdAg NSs to investigate the performance enhancement mechanism. Impressively, the as-optimized PdAgCu NSs exhibited superb mass activity and electrochemical stability. Moreover, under visible light illumination, the mass activity of PdAgCu NSs increased to 1.62 times compared to that in the dark, and in contrast, the mass activity of PdAg NSs only increased to 1.48 times that in the dark. A mechanistic study indicated that the incorporation of Cu not only strengthens the whole SPR effect of PdAgCu NSs but also further modifies the electronic structure of Pd. This work highlighted that the incorporation of Cu into PdAg NSs further enhanced the photoelectrocatalytic performance and increased noble metal atom utilization, which may provide guidance to fabricate novel and promising nanocatalysts in the field of photoelectrocatalysis.

Design of hydrotalcite and biopolymers entrapped tunable cerium organic cubic hybrid material for superior fluoride adsorption

The excess fluoride in drinking water is serious risk which leads to fluorosis. The adsorption method is facile route for defluoridation studies. Hybrid adsorbent possesses unique advantages like high surface area and high stability has been employed for water treatment. In the present work, hydrotalcite (HT) fabricated Ce-metal organic frameworks (MOFs) bridged with biopolymers (alginate and chitosan) namely HT-CeMOFs@Alg-CS cubic hybrid beads was developed and employed towards fluoride removal in batch mode. The fabricated HT-CeMOFs@Alg-CS beads were analyzed by DTA, FTIR, SEM, EDAX, TGA and XRD studies. Besides, FTIR and EDAX proved the affinity of HT-CeMOFs@Alg-CS cubic hybrid beads on fluoride was majorly attributed by electrostatic interaction, ion-exchange and complexation mechanism. To include detail insight into adsorption route; the kinetics, thermodynamic and isotherm studies were investigated for fluoride adsorption. The equilibrium data of HT-CeMOFs@Alg-CS cubic hybrid beads for fluoride adsorption was fitted with Langmuir isotherm model. Thermodynamic investigation results demonstrated that the fluoride adsorption was spontaneous with endothermic nature. The regeneration and field investigation results revealed that the developed HT-CeMOFs@Alg-CS cubic hybrid beads are reusable and more apt at field environment.

Treatment of fluorinated wastewater with chitosan modified activated sludge lysis ash

Preparation of a novel environmentally friendly and cost-effective composite adsorbent for fluoride removal is presented in this work. An activated sludge lysis ash/chitosan (ASLA/C) composite adsorbent was synthesised using an in situ coprecipitation method, and the removal effect of the material was analysed by static adsorption, isothermal adsorption and kinetic adsorption tests. Langmuir model could better describe the adsorption process and the adsorption was in accordance with the kinetic equation of the pseudo-second-order kinetics reaction. The values of adsorption thermodynamic and kinetic parameters were indicated that the adsorption of fluoride ions is a spontaneous, heat-absorbing entropic process, and the reaction was carried out by a combination of mechanisms, such as electrostatic adsorption, ion exchange, surface complexation and hydrogen bonding. The experimental results indicated that ASLA/C can be used as a cheap and readily available alternative efficient adsorbent where the maximum fluorinate absorption was observed with 7.714 mg g^-1, while solving the problem of waste from activated sludge lysis disposal and realizing the environmental benefits of waste.

Rationally designed and hierarchically structured functionalized aluminium organic frameworks incorporated chitosan hybrid beads for defluoridation of water

In this present investigation, aluminium (Al³⁺) fabricated 2-aminobenzene-1,4-dicarboxylic acid (ABDC) namely Al@ABDC metal organic frameworks (MOFs) was developed for defluoridation studies. The unique advantages of developed MOFs possess high selectivity, high porosity and enhanced surface area but the developed powder form of Al@ABDC MOFs has several limitations in field applications like slow filtration and column blockage. To prevail over these troubles, biopolymer namely chitosan (CS) supported Al@ABDC MOFs namely Al@ABDC-CS beads were developed for effective fluoride adsorption from water. The synthesized Al@ABDC-CS beads were employed for the retention of fluoride in batch level. The defluoridation capacities (DCs) of Al@ABDC MOFs and Al@ABDC-CS beads were found to be 4880 and 4900 mgF^- kg^-1 respectively. The influencing parameters of adsorption method namely agitation time, adsorbent dosage, initial fluoride concentration, pH, co-existing anions and temperature were exploit to get utmost defluoridation capacity (DC) of Al@ABDC-CS beads. The experimental data of Al@ABDC-CS beads have been evaluated utilizing Langmuir, Fruendlich and Dubinin-Radushkevich (D-R) isotherms. The defluoridation nature of Al@ABDC-CS beads was determined by the thermodynamic parameters. The order of reaction of Al@ABDC-CS beads was studied using various kinetic models. The regeneration and field water studies of Al@ABDC-CS beads were also carried out to check their reusability and suitability at field conditions.

Defluoridation using hydroxyapatite implanted lanthanum organic framework-based bio-hybrid beads

The present study reports on biopolymer based material namely HAp–La-BTC MOFs@Alg–CS hybrid beads were developed and it was potentially employed for fluoride removal.