Structure and microstructure of the glasses from NaCaPO4–SiO2 and NaCaPO4–SiO2–AlPO4 systems

Effect of Sewage Sludge Addition on Microstructure and Mechanical Properties of Kaolin-Sewage Sludge Ceramic Bricks

The dramatic increase in sewage sludge production requires researchers to develop and explore more commercially viable ways for alleviating current environmental and socioeconomic challenges connected with its routine management. It has been established that sewage sludge can be processed to fabricate various valuable products or as fuels for electricity generation. In this research, kaolin (calcined from coal gangue) and sewage sludge were successfully used to prepare porous ceramic bricks without any additives. The effect of sewage sludge on the microstructure, phase composition, and mechanical properties of kaolin-sewage sludge ceramic bricks was investigated. The results show that the kaolin-sewage sludge ceramic bricks are mainly composed of mullite (3Al2O3·2SiO2), sillimanite (Al2SiO5), aluminum phosphate (AlPO4), hematite (Fe2O3) as well as a small amount of quartz (SiO2). The ceramic bricks present a typical porous structure, and the number and size of micropores increases noticeably with the increase of sewage sludge content. The sintering shrinkage rate and porosity of ceramic bricks increased significantly with the increase of sewage sludge content, which is mainly attributed to the increase of liquid phase proportion and high temperature volatilization. Sewage sludge can significantly improve the mechanical properties of kaolin-sewage sludge ceramic bricks. When the sewage sludge content is 30 wt.%, the ceramic bricks present the maximum compressive strength and flexural strength and high porosity (32.74%). The maximum sintering shrinkage rate and porosity are 12.17% and 40.51%, respectively.

An Insight into the Correlation between Chemical Composition Changes of Aluminum-Iron-Polyphosphate Glasses and Thermal Properties

The present study aimed to investigate the influence of the gradual substitution of Fe₂O₃ by Al₂O₃ on the thermal properties of polyphosphate glasses. The conducted considerations based on differential scanning calorimetry (DSC) and heating microscopy thermal analysis provided much essential information about the correlation between glass chemical composition and its characteristic parameters, such as transformation temperature, specific heat, crystallization temperature, crystallization enthalpy, the activation energy of crystal growth, melting temperature, and Angell glass thermal stability. The obtained estimation of viscosity changes as a function of temperature could be very helpful for researchers to correctly plan the vitrification process and thus radioactive waste immobilization. A precise analysis of DSC curves and X-ray diffraction patterns revealed the possibility of crystallization process design in order to create materials with different levels of crystallinity and phase composition. The drawn conclusions allow choosing the glass with the optimal concentration of Al₂O₃ and Fe₂O₃, which ensures the relatively low melting temperature, viscosity, and glass crystallization ability, with application potential in nuclear waste immobilization.