Syntheses, characterizations, crystal structures and efficient NLO applications of new organic compounds bearing 2-methoxy-4-nitrobenzeneamine moiety and copper (II) complex of (E)-N'-(3, 5-dichloro-2-hydroxybenzylidene) benzohydrazide

Influence of acceptors on the optical nonlinearity of 5H-4-oxa-1,6,9-trithia-cyclopenta[b]-as-indacene-based chromophores with a push-pull assembly: a DFT approach

Herein, a series of compounds (TPD1-TPD6) having a D-π-A architecture was quantum chemically designed via the structural modulation of TPR. Quantum chemical calculations were employed to gain a comprehensive insight into the structural and optoelectronic properties of the designed molecules at the M06/6-311G(d,p) level. Interestingly, all the designed chromophores displayed narrow energy gaps (2.123-1.788 eV) and wider absorption spectra (λmax = 833.619-719.709 nm) with a bathochromic shift in comparison to the reference compound (λmax = 749.602 nm and Egap = 3.177 eV). Further, Egap values were utilized to evaluate global reactivity parameters (GRPs), which indicate that all the chromophores expressed higher softness (σ = 0.134-0.559 eV-1) and lower hardness (η = 4.155-4.543 eV) values than the reference chromophore. Efficient charge transfer from donors towards acceptors was noted through FMOs, which was also supported by DOS and TDM analyses. Overall, the TPD3 derivative exhibited a remarkable reduction in the HOMO-LUMO band gap (1.788 eV) with a red shift as λmax = 833.619 nm. Furthermore, it exhibited prominent linear and non-linear characteristics such as μtotal = 24.1731 D, 〈α〉 = 2.89 × 10-22 esu, and βtotal = 7.24 × 10-27 esu, among all derivatives. The above findings revealed that significant non-linear optical materials could be achieved through structural tailoring with studied efficient acceptors.

Synthesis, Characterization, Crystal Structures, and Supramolecular Assembly of Copper Complexes Derived from Nitroterephthalic Acid along with Hirshfeld Surface Analysis and Quantum Chemical Studies

Two new Cu(II) carboxylate complexes, Cu-NTA and Cu-DNTA, were prepared by treating 2-nitroterephthalic acid with CuSO4·5H2O at room temperature. The synthesized complexes were characterized by elemental (CHN), FT-IR, and thermogravimetric analysis. The crystal structures of both complexes were explored by single crystal X-ray diffraction analysis, which inferred that the coordination geometry is slightly distorted octahedral and square pyramidal in Cu-NTA and Cu-DNTA, respectively. The non-covalent interactions that are the main feature of the supramolecular assembly were investigated by Hirshfeld surface analysis for both complexes. The propensity of each pair of chemical moieties involved in crystal-packing interactions was determined by the enrichment ratio. Quantum chemical computations were performed to optimize the molecular geometry of complex Cu-NTA and compared it with the experimental single crystal structure, which was found to be in sensible agreement with the experimental structure of the complex. The DFT method was used to see the potential of the selected Cu-NTA complex for linear and nonlinear optical properties. The static NLO polarizability <γ> of complex Cu-NTA was calculated to be 86.28 × 10-36 esu at M06 functional and 6-31G*/LANL2DZ basis set, which was rationally large to look for NLO applications of complex Cu-NTA. Additionally, the molecular electrostatic potential and frontier molecular orbitals were also computed with the same methodology to see electronic characteristics and ground-state electronic charge distributions.

Structural and theoretical investigations, Hirshfeld surface analysis and anti-SARS CoV-2 of nickel (II) coordination complex

A nickel(II) Schiff base complex, [Ni(L)(DMF)](1), was synthesized by treating NiCl₂.6H₂O with an ONS-donor Schiff base ligand(H₂L) derived from the condensation 3,5-Dichlorosalicylaldehyde and 4,4-Dimethyl-3-thiosemicarbazide in DMF. The geometry around the center metal ion in [Ni(L)(DMF)](1) was square planar as revealed by the data collection from diffraction studies. DFT calculations were performed on the complex to get a structure-property relationship. Hirshfeld surface analysis was also carried out in the crystal structure of nickel (II) Schiff base complex. Additionally, inspiring from recent developments to find a potential inhibitor for SARS-CoV-2 virus, we have also performed molecular docking study of [Ni(L)(DMF)](1) to see if our novel complex show affinity for main protease (M^pro) of SARS-CoV-2 M^pro (PDB ID: 6LZE). Interestingly, the results are found quite encouraging where the binding affinity and inhibition constant was found to be -6.6 kcal/mol and 2.358 µM, respectively, for the best docked confirmation of complex [Ni(L)(DMF)](1) with M^pro protein. This binding affinity is reasonably well as compared to recently known antiviral drugs. For instance, the binding affinity of complex [Ni(L)(DMF)](1) is found to be better than that of recently docking results of anti-SARS-CoV-2 drugs like chloroquine (-6.293 kcal/mol), hydroxychloroquine (-5.573 kcal/mol) and remdesivir (-6.352 kcal/mol) when targeted to the active-site of SARS-CoV-2 M^pro. Besides this, molecular docking against G25K GTP-nucleotide binding protein (PDB ID: 1A4R) was also studied. We believe that current results can intrigue not only for the biomedical community but also for the materials chemists who are engaged to explore the application coordination complexes. Communicated by Ramaswamy H. Sarma.

Structural and theoretical study of copper(ii) complex incorporating chalcone and 2,2′-bipyridine mixed ligands: a probable candidate for optical material

We report the synthesis, structural and photophysical data for a Cu(ii) complex, [Cu(L·bpy)(NO3)], with mixed chalcone and 2,2′-bipyridine ligands. Calculations are used to consider prospective applications in optoelectronic devices.

Synthesis, crystal structure, computational study and anti-virus effect of mixed ligand copper (II) complex with ONS donor Schiff base and 1, 10-phenanthroline

This work deals with the synthesis, crystal structure, computational study and antiviral potential of mixed ligand copper(II) complex [Cu(L)(phen)](1), (where, H₂L = (Z)-N'-((E)-2-hydroxy-3,5-diiodobenzylidene)-N,N-dimethylcarbamohydrazonothioic acid, phen = 1,10-phenanthroline). The Schiff base ligand (H₂L) is coordinated with Cu(II) ion in O, N, S-tridentate mode. The copper complex (1) crystallized in the monoclinic system of the space group P21/c with eight molecules in the unit cell and reveals a square pyramidal geometry. Furthermore, we also perform quantum chemical calculations to get insights into the structure-property relationship and functional properties of ligand (H₂L) and its copper (II) complex [Cu(L)(phen)](1). Complex [Cu(L)(phen)](1) was also virtually designed in-silico evaluation by Swiss-ADME. Additionally, inspiring by recent developments to find a potential inhibitor for the COVID-19 virus, we have also performed molecular docking study of ligand and its copper complex (1) to see if our compounds shows an affinity for the main protease (M^pro) of COVID-19 spike protein (PDB ID: 7C8U). Interestingly, the results are found quite encouraging where the binding affinity and inhibition constant were found to be -7.14 kcal/mol and 5.82 μM for ligand (H₂L) and -6.18 kcal/mol and 0.76 μM for complex [Cu(L)(phen)](1) with M^pro protein. This binding affinity is reasonably well as compared to recently known antiviral drugs. For instance, the binding affinity of ligand and complex was found to be better than docking results of chloroquine (-6.293 kcal/mol), hydroxychloroquine (-5.573 kcal/mol) and remdesivir (-6.352 kcal/mol) with M^pro protein. The present study may offer the technological solutions and potential inhibition to the COVID-19 virus in the ongoing and future challenges of the global community. In the framework of synthesis and characterization of mixed ligand copper (II) complex; the major conclusions can be drawn as follow.

Synthesis, characterization, and computational study of copper bipyridine complex [Cu (C18H24N2) (NO3)2] to explore its functional properties

In the present study, copper (II) complex of 4, 4'-di-tert-butyl-2,2'-bipyridine [Cu (C₁₈H₂₄N₂) (NO₃)₂], 1 is investigated through its synthesis and characterization using elemental analysis technique, infra-red spectroscopy, and single-crystal analysis. The compound 1 crystallizes in orthorhombic space group P2₁2₁2₁. The copper atom in the mononuclear complex is hexa coordinated through two nitrogen and four oxygen atoms from bipyridine ligand and nitrate ligands. The thermal analysis depicts the stability of the entitled compound up to 170 °C, and the decomposition takes place in different steps between 170 and 1000 °C. Furthermore, quantum chemical techniques are used to study optoelectronic, nonlinear optical, and therapeutic bioactivity. The values of isotropic and anisotropic linear polarizabilities of compound 1 are calculated as 41.65 × 10^-24 and 23.02 × 10^-24 esu, respectively. Likewise, the static hyperpolarizability is calculated as 47.92 × 10^-36 esu using M06 functional compared with para-nitroaniline (p-NA) and found several times larger than p-NA. Furthermore, the antiviral potential of compound 1 is studied using molecular docking technique where intermolecular interactions are checked between the entitled compound and two crucial proteins of SARS-CoV-2 (COVID-19). Our investigation indicated that compound 1 interacts more vigorously to spike protein than main protease (M^Pro) due to its better binding energy of -9.60 kcal/mol compared with -9.10 kcal/mol of M^Pro. Our current study anticipated that the above-entitled coordination complexes could be potential candidates for optoelectronic properties and their biological activity.

Theoretical study by DFT of organometallic complexes based on metallocenes active in NLO

This study is based on the valuation of a few model molecules. The objective of this research is focused on linear optical (LO) and nonlinear optical (NLO) enhancement of five organometallic molecules based on different metallocenes. These molecules were subjected to several calculations by different long-range functionals CAM-B3LYP, LC-BLYP, LC-wPBE, wB97X, M11, and the following three Minnesota functionals: M06-2X and M08-HX in comparison with the MP2 approach. Hence, the CAM-B3LYP functional gave the closest NLO values to the MP2 method. Second, molecule 3A based on nickelocene recorded the highest static (β_tot) value which is 76.46 Χ 10^-30 esu and 4803.4 Χ 10^-30 esu under the laser wavelength λ = 532 nm. Third, intramolecular charge transfers (ICTs) of the molecules studied are all directed in both directions (donor to acceptor and vice versa). Finally, the specific solvent for molecules 2A and 3A is acetonitrile, and the maximum wavelengths obtained for the isolated or solvated molecule are all located in the near UV; the corresponding interval is between 250 and 395 nm. Graphical abstract.

DFT study of superhalogen and superalkali doped graphitic carbon nitride and its non-linear optical properties

DFT calculations are carried out to investigate nonlinear optical (NLO) properties of superhalogen (BCl4) and superalkali (NLi4) doped graphitic carbon nitride (GCN). It is noted that the geometries of doped GCN are sufficiently stable. The energy gap for GCN is 3.89 and it reduces to 0.53 eV in our designed molecule G4. Change in the dipole and transition dipole moment is observed along with small transition energies which are responsible for higher hyperpolarizabilities. Doped GCN has larger first and second hyperpolarizabilities which are basic requirements for NLO response. The second hyperpolarizability of GCN enhances from 1.59 × 104 to 2.53 × 108 au when doping with BCl4 and NLi4. TD-DFT calculations show the absorption maxima of doped GCN range from 700 nm to 1350 nm. EDDM analysis provides information on electronic distribution from excited to ground state. All these consequences show doped GCN can be a promising NLO material.

A Novel and High-Effective Biosynthesis Pathway of Hesperetin-7-O-Glucoside Based on the Construction of Immobilized Rhamnosidase Reaction Platform

Hesperetin-7-O-glucoside (HMG) is a precursor for synthesizing a sweetener named neohesperidin dihydrochalcone, and the coordination toward flavonoids of metal ions tends to increase the water solubility of flavonoids. In order to achieve effective synthesis of HMG, an immobilized enzyme catalysis platform was constructed using an immobilized rhamnosidase on Fe₃O₄@graphene oxide (Fe₃O₄@GO), a novel reaction pathway based on the platform was designed for preparing a hesperidin complex as a soluble substrate, and ammonium hydroxide as a ligand dissociation agent to obtain HMG. The Fe₃O₄@GO was characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), and thermal methods (TG/DSC) analysis to evaluate the immobilization matrix properties. The enzyme activity in free and immobilized form at different pH and temperature was optimized. The reusability of immobilized enzyme was also determined. In addition, the kinetic parameters (K_m and V_max) were computed after experiment. Results indicated that rhamnosidase immobilized on Fe₃O₄@GO using a green cross-linker of genipin hydrolyzed successfully and selectively the soluble hesperidin-Cu (II) complex into HMG-Cu (II), a permanent magnet helped the separation of immobilized enzyme and hydrolytes, and ammonium hydroxide was an effective ligand dissociation agent of translating HMG-Cu (II) into HMG with high purity determined by ultraviolet-visible (UV-Vis) spectra analysis and time-of-flight mass spectrometry (TOF-MS). As a result, a novel and high-effective biosynthesis pathway of HMG based on a selectively catalytic reaction platform were constructed successfully. The pathway based on the platform has great potential to produce valuable citrus monoglycoside flavonoid HMG, and the designed reaction route are feasible using the hesperidin-Cu (II) complex with good solubility as a reaction substrate and using ammonium water as a dissociation agent.

A comparison between observed and DFT calculations on structure of 5-(4-chlorophenyl)-2-amino-1,3,4-thiadiazole

The crystal and molecular structure of 5-(4-chlorophenyl)-2-amino-1,3,4-thiadiazole 3 was reported, which was characterized by various spectroscopic techniques (FT-IR, NMR and HRMS) and single-crystal X-ray diffraction. The crystal structure 3 (C₈H₆ClN₃S) crystallized in the orthorhombic space group Pna2₁ and the unit cell consisted of 8 asymmetric molecules. The unit cell parameters were a = 11.2027(2) Å, b = 7.6705(2) Å, c = 21.2166(6) Å, α = β = γ = 90°, V = 1823.15(8) ų, Z = 8. In addition, the structural geometry (bond lengths, bond angles, and torsion angles), the electronic properties of mono and dimeric forms of compound 3 were calculated by using the density functional theory (DFT) method at B3LYP level 6-31+ G(d,p), 6-31++ G(d,p) and 6-311+ G(d,p) basis sets in ground state. A good correlation was found (R² = 0.998) between the observed and theoretical vibrational frequencies. Frontier molecular orbitals (HOMO and LUMO) and Molecular Electrostatic Potential map of the compound was produced by using the optimized structures. The NBO analysis was suggested that the molecular system contains N-H…N hydrogen bonding, strong conjugative interactions and the molecule become more polarized owing to the movement of π-electron cloud from donor to acceptor. The calculated structural and geometrical results were in good rational agreement with the experimental X-ray crystal structure data of 1,3,4-thiadiazol-2-amine, 3. The compound 3 exhibited n→π* UV absorption peak of UV cutoff edge, and great magnitude of the first-order hyperpolarizability was observed. The obtained results suggest that compound 3 could have potential application as NLO material. Therefore, this study provides valuable insight experimentally and theoretically, for designing new chemical entities to meet the demands of specific applications.