Dual optical properties of new schiff base based on bisthiophene for sensing of Cu2+ in protic media

Aminothiophenol and 7-diethylamino-4-hydroxycoumarin derived probe for reversible turn off-on-off detection of Cu2+ ions and cysteine

Here, we present a simple disulfide linked probe HTP for rapid detection of Cu2+ ions, which was prepared by a condensation reaction between 7-diethylamino-4-hydroxycoumarin aldehyde and 2-aminothiophenol. The disulfide linked probe HTP was characterized using 1H NMR, 13C NMR, and HRMS spectroscopic analysis and confirmed by single crystal X-ray diffraction analysis. The photophysical behavior of HTP in various solvents (non-polar to polar) was studied and HTP displayed aggregation induced emission (AIE) characteristics in CH3CN-water mixtures (0-99 %). Upon binding with Cu2+ ions, emission enhancement occurs along with color changes from weak green to intense yellow emission in CH3CN/Tris-HCl buffer (20 μM, 9:1, 10 mM Tris HCl Buffer, pH = 7.4). Detection limit for Cu2+ ions was found to be 0.97 nM which is lower than the recommended tolerance limit by the WHO and the association constant 0.42 × 108 M-1 was obtained using B-H plot. Furthermore, the stoichiometric ratio 1:1 was confirmed by Job's plot, 1H NMR, mass spectral analysis and DFT calculations were supported the formation of HTP-Cu2+ complex. The reversibility of HTP with Cu2+ ions was achieved by cysteine with detection limit and association constant value of 1.64 µM and 0.15 × 107 M-1 respectively. The reversible sensing nature of HTP with Cu2+/cysteine was further applied for constructing a molecular logic gate (INHIBIT) and practical applications such as paper strips, cotton swabs and real water analysis.

A Carbazole Acrylonitrile Substituted Turn-On Fluorescence Chemosensors for Cyanide Ion and its Application to Real Sample Analysis

An efficient probe (E)-2-(benzo[d]thiazol-2-yl)-3-(9-ethyl-9 H-carbazol-3-yl)acrylonitrile (CZ-BTZ) for selective fluorescence "turn-on" response with cyanide (CN-) ion sensor was developed by simple Knoevenagel condensation of 9-ethyl-9 H carbazole-3-carbaldehyde with 2-(benzo[d]thiazol-2-yl) acetonitrile. The sensing ability of probe CZ-BTZ was tested with different inorganic anions through spectrophotometric and spectrofluorimetric methods. The UV-vis and fluorescence spectral studies show the formation of a new adduct between CZ-BTZ and CN- by appearing with a new absorbance band at 350 nm and "turn-on" fluorescence at 535 nm in CH3CN: H2O (8:2, v/v, pH 7.2). The absorbance and fluorescence study reveals the formation of 1:1 (CZ-BTZ: CN-) stoichiometry adducts with an estimated association constant of 2.04 × 105 M-1. The probe CZ-BTZ could detect CN- down to 4.19 nM without much interference, much lower than the WHO limit (1.9 µM) in drinking water. The sensing mechanism of CZ-BTZ with CN- ions was studied using FTIR, ESI mass analysis, and DFT calculation. Further, the probe was applied to analyse CN- ions' real-time food sample analysis.

Selective Detection of Divalent Cations (Cu2+, Zn2+, Pb2+) and Anions (SO42-, S2-, CO32-) Using a pH-Sensitive Multi-functional Schiff Base in Neutral Medium

A new Schiff base-based multi-cation/anion probe (L) has been synthesized and characterized using HR-MS, FT-IR, 1H, and 13C NMR techniques. The Schiff base motif provides specific binding sites that detect cations and anions by generating distinct optical output signals upon interaction. A noticeable color change of the probe solution was observed from pale yellow to various shades of yellow upon adding cations such as Cu2+, Zn2+, and Pb2+ and anions such as CO32⁻, S2⁻, and SO42⁻. This color change results from forming complexes like M3L2 with metal ions. Whereas origin of color in presence of anion were attributed due to the deprotonation of acidic proton in the ligand. Moreover, the complexes formed by Zn2+, S2/CO32⁻ ion with L are fluorescent, enabling the detection of Cu2+ and SO42⁻ using the Stern-Volmer plot, with a limit of detection (LODs) of 8.48 µM and 10.47 µM, respectively. Additionally, increasing the pH of the probe solution above 8 reveals a significant enhancement of fluorescence intensity due to the deprotonation of phenolic -OH and amide -NH in the presence of hydroxide ions. This emission in the basic medium is quenched by Cu2+ ions and restored when Cu2+ is complexed with EDTA. A logic gate has also been constructed for understanding the TURN-OFF-TURN-ON mechanism involving Cu2+ ions and EDTA. Overall, the versatile performance of a single probe L opens up new possibilities as a multifunctional sensor, making it highly suitable for practical applications.

A Novel Rhodamine B Derivative as a "Turn-on" Fluorescent Sensor for Cu2+ with High Selectivity and Sensitivity

The number of "turn-on" fluorescent probes for Cu2+ is relatively limited, and interference from other metal cations presents a significant challenge for these sensors. In this study, we synthesized and characterized a rhodamine B-based sensor, designated as RBHP, using 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) and rhodamine B hydrazide. Selectivity, sensitivity, solvent effects, water content, and pH of RBHP in relation to Cu²⁺ were conducted. RBHP exhibited an exceptionally low fluorescence background signal in acetonitrile and demonstrated a "turn-on" fluorescent response to Cu²⁺. The PMBP-based acylhydrazone moiety and acetonitrile as the detection solvent are crucial for the selective detection. RBHP shows potential as a highly selective and sensitive fluorescent sensor for Cu2+.

A carboethoxy quinoline-Derived Schiff base chemosensor: Crystal structure, selective Hg2+ ion detection and its computational study

Environmental monitoring of mercury (Hg2+) ions has become increasingly important as a result of their detrimental effects on biological organisms at all levels. To recognize toxic metal ions, utmost effort has been devoted to developing new materials that are highly selective, ultra-sensitive, and provide rapid response. In this context, a new chemosensor, 2-imino [N - (N-amido phenyl)]-6-methoxy-3-carbethoxy quinoline (L), has been synthesized by combining 2-formyl-6-methoxy-3-carbethoxy quinoline and benzhydrazide and it has been extensively characterized by NMR, FTIR, ESI-Mass and SCXRD analysis. Probe L has excellent specificity and sensitivity toward Hg2+ ions in semi-aqueous solutions, with a detection limit of 0.185 μM, regardless of the presence of other interfering cations. Chromogenic behavior was demonstrated by the L when it changed the color of the solution from colorless to light yellow, a change that can be observed visually. The probe L forms a 1:1 stochiometric complex with an estimated association constant (Ka) of 6.74 × 104 M-1. The 1H NMR change and density functional theory calculations were analyzed to improve our understanding of the sensing mechanism. Also, an inexpensive and simple paper-based test kit has been developed for the on-site detection of mercury ions in water samples.

Strategies for Improving Selectivity and Sensitivity of Schiff Base Fluorescent Chemosensors for Toxic and Heavy Metals

Toxic cations, including heavy metals, pose significant environmental and health risks, necessitating the development of reliable detection methods. This review investigates the techniques and approaches used to strengthen the sensitivity and selectivity of Schiff base fluorescent chemosensors designed specifically to detect toxic and heavy metal cations. The paper explores a range of strategies, including functional group variations, structural modifications, and the integration of nanomaterials or auxiliary receptors, to amplify the efficiency of these chemosensors. By improving selectivity towards targeted cations and achieving heightened sensitivity and detection limits, consequently, these strategies contribute to the advancement of accurate and efficient detection methods while increasing the range of end-use applications. The findings discussed in this review offer valuable insights into the potential of leveraging Schiff base fluorescent chemosensors for the accurate and reliable detection and monitoring of heavy metal cations in various fields, including environmental monitoring, biomedical research, and industrial safety.

A novel 1,8-naphthalimide-based Cu2+ ion fluorescent probe and its bioimaging application

A new 1,8-naphthalimide-based Schiff base compound, named as (Z)-2-butyl-6-(((2-hydroxyphenyl)imino)methyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione (BHBD), has been simply synthesized with high yields. BHBD can be employed as a "turn-on" fluorescent probe for Cu²⁺ ion with high sensitivity, high selectivity and relatively low detection limit (0.48 × 10^-6 M). The fluorescence emission of BHBD is very weak in H₂O/THF (v/v: 7/3) mixture, which is significantly enhanced after addition of Cu²⁺ ion. The proposed mechanism is verified by ¹H NMR, Job's plot and TOF-MS experiments. Anti-interference experiment, cytotoxicity assay and pH influence results indicated that BHBD meets the requirements of bioimaging. Therefore, BHBD has been successfully applied in detecting Cu²⁺ ion in HeLa cells.

Fluorescence Based Comparative Sensing Behavior of the Nano-Composites of SiO2 and TiO2 towards Toxic Hg2+ Ions

We have synthesized sulfonamide based nano-composites of SiO2 and TiO2 for selective and sensitive determination of toxic metal ion Hg2+ in aqueous medium. Nano-composites (11) and (12) were morphologically characterized with FT-IR, solid state NMR, UV-vis, FE SEM, TEM, EDX, BET, pXRD and elemental analysis. The comparative sensing behavior, pH effect and sensor concentrations were carried out with fluorescence signaling on spectrofluorometer and nano-composites (11) and (12), both were evaluated as "turn-on" fluorescence detector for the toxic Hg2+ ions. The LODs were calculated to be 41.2 and 18.8 nM, respectively of nano-composites (11) and (12). The detection limit of TiO2 based nano-composites was found comparatively lower than the SiO2 based nano-composites.

Fluorescence "Turn On-Off" Sensing of Copper (II) Ions Utilizing Coumarin-Based Chemosensor: Experimental Study, Theoretical Calculation, Mineral and Drinking Water Analysis

Herein, we report the preparation of a fluorescent sensor based on coumarin derivative for copper (II) ion sensing in CH₃CN/HEPES media. 6,7-dihydroxy-3-(4-(trifluoro)methylphenyl)coumarin (HMAC) sensor was fabricated and analyzed by spectroscopic techniques. The sensor demonstrates "turn on-off" fluorescence quenching in the presence of copper (II) ions at 458 nm. A clear complex between the chemosensor HMAC and copper (II) ions was characterized by ESI-MS as well as the Job's method. Also, the limit of detection (LOD, 3σ/k) value was determined as 24.5 nM in CH₃CN/HEPES (95/5, v/v) buffer media (pH = 7.0). This value is lower than the admissible level of copper (II) ions in drinking water (maximum 31.5 μM) reported by EU Water Framework Directive (WFD) and World Health Organization (WHO) guidelines. The theoretical calculations (density functional theory, DFT) have been performed for the geometric optimized structures. As a final stage, real sample analyses have successfully been performed by using HMAC, as well as ICP-OES method. The relative standard deviation for copper (II) in mineral and drinking water samples has been determined to be below 0.15% and recovery values are in the range of 95.48-109.20%.