Optical, electrical and mechanical studies of paper sheets coated by metals (Cu and Ag) via pulsed laser deposition

Gradient Hierarchically Porous Ionic-Junction Fibers of Wet-Spun Carboxymethyl Cellulose Coagulated with Copper Sulfate

Polyelectrolyte-based ionic-junction fibers newly serve as signal transmission and translation media between electronic devices and biological systems, facilitating ion transport within organic matrices. In this work, we fabricated gel filaments of carboxymethyl cellulose (CMC) chelated with Cu(II) ions through wet-spinning, using a saturated coagulant of CuSO4. Interestingly, the as-spun fibers exhibited dramatic 3D porous frameworks that varied with the temperature and precursor concentration. At 20 °C, the Cu(II) chelation networks favored the formation of well-organized cellular chambers or corrugated channels, displaying dense stacking patterns. However, critical transitions from cellular chambers to corrugated channels occurred at precursor dope concentrations of approximately 2 and 7 wt %, with the porous structure diminishing beyond 8 wt %. We have proposed schematic diagrams to mimic the 3D pore structure, dense porous stacking, and formation mechanism, according to electronic micrographs. Our investigations revealed that the distinct ion-junction channels or chambers are under the control of axial drawing extension as well as the outside-inside penetration of Cu(II) ions into the dope and inside-outside diffusion of water into coagulants. Therefore, controlling the metal chelation-water diffusion process at specific temperatures and concentrations will offer valuable insights for tailoring ionic-junction soft filaments with gradient hierarchically porous structures and shape memory properties.

Green synthesis of nanocellulose supported cu-bionanocomposites and their profound applicability in the synthesis of amide derivatives and controlling of food-borne pathogens

Copper bionanocomposites (CBNCS) were synthesized using Ipomoea carnea- sourced nanocellulose as support via an eco-friendly and cost-effective method. X-ray Diffractometer (XRD) pattern of CBNCS confirmed the octahedral structure of Cu2O, the face-centered cubic (FCC) crystal structure of Cu(0). XRD also revealed the crystal lattice of cellulose II. Surface Electron Microscope (SEM) and Transmission Electron Microscope (TEM) revealed the uniform distribution of copper nanoparticles (Cu NPs) with an average size of 10 nm due to the presence of nanocellulose. X-ray photoelectron spectroscopy (XPS) provided information about the electronic, chemical state and elemental composition of CBNCS. Thermogravimetric Analysis (TGA) showed the thermal stability of CBNCS. CBNCS catalyzed the rearrangement of oximes to primary amides in a very mild condition with a high yield of up to 92 %. CBNCS effectively inhibited the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with lower minimum inhibitory concentration MIC values. Antioxidant activity and electrical conductivity of CBNCS were also determined.

Dynamic mechanical characteristics of aged silicone rubber blend

The effect of aging on the mechanical properties of silicone rubber (SR) was investigated by means of ultrasonic, dynamic mechanical analysis, and FTIR techniques. Both longitudinal and shear (Ultrasonic wave velocities) were measured at room temperature and at frequencies of 2 MHz. Density, molar volume, ultrasonic wave velocities, tensile strength, mechanical properties, and FT–IR showed the improvement of the silicone rubber network with aging time from 0 to 70 days, while loosening of the network structure was observed at 14 days and 50 days aging. These behaviours were explained in terms of the change in cross-link density and average stretching force constant of bonds with aging. Thermogravimetric analysis and differential scanning calorimetric techniques showed quite low thermal stability and temperature performance for aged SR at 14 and 50 days than virgin SR which was confirmed by the cracks and voids appeared under scanning electron microscope.

Photocatalytic Performance Improvement by Doping Ag on ZnO/MWCNTs Nanocomposite Prepared with Pulsed Laser Ablation Method Based Photocatalysts Degrading Rhodamine B Organic Pollutant Dye

ZnO/MWCNTs nanocomposite has significant potential in photocatalytic and environmental treatment. Unfortunately, its photocatalytic efficacy is not high enough due to its poor light absorbance and quick recombination of photo-generated carriers, which might be improved by incorporation with noble metal nanoparticles. Herein, Ag-doped ZnO/MWCNTs nanocomposite was prepared using a pulsed laser ablation approach in the liquid media and examined as a degradable catalyst for Rhodamine B. (RhB). Different techniques were used to confirm the formation of the nanostructured materials (ZnO and Ag) and the complete interaction between them and MWCNTs. X-ray diffraction pattern revealed the hexagonal wurtzite crystal structure of ZnO and Ag. Additionally, UV-visible absorption spectrum was used to study the change throughout the shift in the transition energies, which affected the photocatalytic degradation. Furthermore, the morphological investigation by a scanning electron microscope showed the successful embedding and decoration of ZnO and Ag on the outer surface of CNTs. Moreover, the oxidation state of the formed final nanocomposite was investigated via an X-ray photoelectron spectrometer. After that, the photocatalytic degradations of RhB were tested using the prepared catalysts. The results showed that utilizing Ag significantly impacted the photo degradation of RhB by lowering the charge carrier recombination, leading to 95% photocatalytic degradation after 12 min. The enhanced photocatalytic performance of the produced nanocomposite was attributed to the role of the Ag dopant in generating more active oxygen species. Moreover, the impacts of the catalyst amount, pH level, and contact time were discussed.

Ag/ZnO Thin Film Nanocomposite Membrane Prepared by Laser-Assisted Method for Catalytic Degradation of 4-Nitrophenol

Zinc oxide thin film (ZnO thin film) and a silver-doped zinc oxide nanocomposite thin film (Ag/ZnO thin film) were prepared by the technique of the pulsed laser deposition at 600 °C to be applicable as a portable catalytic material for the removal of 4-nitrophenol. The nanocomposite was prepared by making the deposition of the two targets (Zn and Ag), and it was analyzed by different techniques. According to the XRD pattern, the hexagonal wurtzite crystalline form of Ag-doped ZnO NPs suggested that the samples were polycrystalline. Additionally, the shifting of the diffraction peaks to the higher angles, which denotes that doping reduces the crystallite size, illustrated the typical effect of the dopant Ag nanostructure on the ZnO thin film, which has an ionic radius less than the host cation. From SEM images, Ag-doping drastically altered the morphological characteristics and reduced the aggregation. Additionally, its energy band gap decreased when Ag was incorporated. UV spectroscopy was then used to monitor the catalysis process, and Ag/ZnO thin films had a larger first-order rate constant of the catalytic reaction K than that of ZnO thin film. According to the catalytic experiment results, the Ag/ZnO thin film has remarkable potential for use in environmentally-favorable applications.

Synthesis of Ag Nanoparticles-Decorated CNTs via Laser Ablation Method for the Enhancement the Photocatalytic Removal of Naphthalene from Water

Silver nanoparticles (Ag NPs) were decorated with different amounts on the exterior walls of carbon nanotubes (CNTs) by a laser ablation assisted method, especially in liquid media to be applied as a good adsorption material against naphthalene. The laser ablation time was controlled the amount of decoration Ag NPs on CNTs. The prepared nanocomposite was analyzed via different analytical techniques. Ag NPs with a small size distribution of 29 nm are uniformly decorated with spherical shape on CNTs walls. The disorder degree of tubular structure and shifting of the vibrational characteristic peaks increase with the increase in the decoration of Ag NPs. After that, the prepared samples were investigated for the removal of naphthalene. These studies of loading Ag NPs with different amounts on the surface of CNTs act as a promising material for water treatment.