Structural characterization, morphology, optical and colorimetric properties of NiWO4 crystals synthesized by the co-precipitation and polymeric precursor methods

Solvent Effect on the Structural, Optical, Morphology, and Antimicrobial Activity of Silver Phosphate Microcrystals by Conventional Hydrothermal Method

The design of particle size and morphology are a promising approach to investigating the properties exhibited by different types of materials. In the present study, the silver phosphate microcrystals (Ag3PO4) were first time synthesized using the hydrothermal and solvothermal method by combination of the solvents water/isopropyl alcohol (SP-IA), water/acetone (SP-AC), water/ammonium hydroxide (AP-AH), all in a ratio of 1:1 (v/v). The synthesized materials were structurally characterized by X-ray diffraction (XRD), Rietveld refinement, and Raman vibrational spectroscopy, where it was confirmed that the pure phase was achieved for all prepared samples. The study of the optical properties by UV-vis diffuse reflectance spectroscopy (UV-vis/DRS) and colorimetry revealed that the obtained materials have an optical bandgap between 2.30 and 2.32 eV. The FE-SEM images collected revealed different morphologies for the synthesized materials, with a predominance of tetraploid-shaped microcrystals for the SP-AC sample, rods for the SP-IA sample, cubes and polyhedral for the SP-WT sample and condensed polyhedral for the SP-AH sample. The photocatalytic performance against the Rhodamine B dye (RhB) was 100%, 98.2%, 94.2%, and 87.8%, using the samples SP-AC, SP-IA, SP-WT, and SP-AH as photocatalyst at time of 12 min. On the other hand, the antimicrobial performance of SP-AC sample showed superior performance, resulting in the minimum inhibitory concentration-MIC of 7.81 μg mL-1 for the strain of E. coli, 7.81 μg mL-1 for the strain of E. aureus, 15.62 μg mL-1 for the strain of P. auruginosa, and 15.62 μg mL-1 for the strains of C. albicans. In this way, was synthesized a promissory antimicrobial and photocatalyst material, through an easy and cost-effective method.

Band-Gap Energy and Electronic d-d Transitions of NiWO4 Studied under High-Pressure Conditions

We report an extensive study of the optical and structural properties of NiWO4 combining experiments and density functional theory calculations. We have obtained accurate information on the pressure effect on the crystal structure determining the equation of state and compressibility tensor. We have also determined the pressure dependence of the band gap finding that it decreases under compression because of the contribution of Ni 3d states to the top of the valence band. We report on the sub-band-gap optical spectrum of NiWO4 showing that the five bands observed at 0.95, 1.48, 1.70, 2.40, and 2.70 eV correspond to crystal-field transitions within the 3d8 (t2g6eg2) configuration of Ni2+. Their assignment, which remained controversial until now, has been resolved mainly by their pressure shifts. In addition to the transition energies, their pressure derivatives are different in each band, allowing a clear band assignment. To conclude, we report resistivity and Hall-effect measurements showing that NiWO4 is a p-type semiconductor with a resistivity that decreases as pressure increases.

Tuning the Surface Electronic Structure of Amorphous NiWO4 by Doping Fe as an Electrocatalyst for OER

Water electrolysis is considered as one of the alternative potential approaches for producing renewable energy. Due to the sluggish kinetic nature of oxygen evolution reaction (OER), it encounters a significant overpotential to achieve water electrolysis. Hence, the advancement of cost-effective transition metal-based catalysts toward water splitting has gained global attention in recent years. In this work, the doping of Fe over amorphous NiWO₄ increased the OER activity effectively and achieved stable oxygen evolution in the alkaline medium, which show better electrocatalytic activity as compared to crystalline tungstate. As NiWO₄ has poor activity toward OER in the alkaline medium, the doping of Fe³⁺ will tune the electronic structure of Ni in NiWO₄ and boost the OER activity. The as-synthesized Fe-doped amorphous NiWO₄ exhibits a low overpotential of 230 mV to achieve a current density of 10 mA cm^-2 and a lower Tafel slope value of 48 mV dec^-1 toward OER in 1.0 M KOH solution. The catalyst also exhibits long-term static stability of 30 h during chronoamperometric study. The doping of Fe improves the electronic conductivity of Ni-3d states in NiWO₄ which play a dominant role for better catalytic activity via synergistic interaction between Fe and active Ni sites. In future, these results offer an alternative route for precious metal-free catalysts in alkaline medium and can be explicitly used in various tungstate-based materials to increase the synergism between the doped atom and metal ions in tungstate-based materials for further improvement in the electrocatalytic performance.

Development of Z-scheme bimetallic tungstate-supported nitrogen deficient g-C3N4 heterojunction for the treatment of refractory pharmaceutical pollutants

The binary BMT/ND-GCN-based heterostructure photocatalyst for pharmaceutical industry wastewater treatment.

NiWO4 Microflowers on Multi-Walled Carbon Nanotubes for High-Performance NH3 Detection

NiWO4 microflowers with a large surface area up to 79.77 m2·g-1 are synthesized in situ via a facile coprecipitation method. The NiWO4 microflowers are further decorated with multi-walled carbon nanotubes (MWCNTs) and assembled to form composites for NH3 detection. The as-fabricated composite exhibits an excellent NH3 sensing response/recovery time (53 s/177 s) at a temperature of 460 °C, which is a 10-fold enhancement compared to that of pristine NiWO4. It also demonstrates a low detection limit of 50 ppm; the improved sensing performance is attributed to the porous structure of the material, the large specific surface area, and the p-n heterojunction formed between the MWNTs and NiWO4. The gas sensitivity of the sensor based on daisy-like NiWO4/MWCNTs shows that the sensor based on 10 mol % (MWN10) has the best gas sensitivity, with a sensitivity of 13.07 to 50 ppm NH3 at room temperature and a detection lower limit of 20 ppm. NH3, CO2, NO2, SO2, CO, and CH4 are used as typical target gases to construct the NiWO4/MWCNTs gas-sensitive material and study the research method combining density functional theory calculations and experiments. By calculating the morphology and structure of the gas-sensitive material NiWO4(110), the MWCNT load samples, the vacancy defects, and the influence law and internal mechanism of gas sensitivity were described.