Hierarchical porous architectures derived from low-cost biomass equisetum arvense as a promising anode material for lithium-ion batteries

Carbonization of Corn Leaf Waste for Na-Ion Storage Application Using Water-Soluble Carboxymethyl Cellulose Binder

Hard carbon materials are considered to be the most practical anode materials for sodium ion batteries because of the rich availability of their resources and potentially low cost. Here, the conversion of corn leaf biomass, a largely available agricultural waste, into carbonaceous materials for Na-ion storage application is reported. Thermal analysis investigation determines the presence of exothermic events occurring during the thermal treatment of the biomass. Accordingly, various temperatures of 400, 500, and 600 °C are selected to perform carbonization treatment trials, leading to the formation of various biocarbons. The materials obtained are characterized by a combination of methods, including X-ray diffraction, electron microscopy, surface evaluation, Raman spectroscopy, and electrochemical characterizations. The Na-ion storage performances of these materials are investigated using water-soluble carboxymethyl cellulose binder, highlighting the influence of the carbonization temperature on the electrochemical performance of biocarbons. Moreover, the influence of post-mechanochemical treatment on the Na-ion storage performance of biocarbons is studied through kinetic evaluations. It is confirmed that reducing the particle sizes and increasing the carbon purity of biocarbons and the formation of gel polymeric networks would improve the Na-ion storage capacity, as well as the pseudocapacitive contribution to the total current. At a high-current density of 500 mA g-1, a specific Na-ion storage capacity of 134 mAh g-1 is recorded on the biocarbon prepared at 600 °C, followed by ball-milling and washing treatment, exhibiting a reduced charge transfer resistance of 49 Ω and an improved Na-ion diffusion coefficient of 4.8 × 10-19 cm2 s-1. This article proposes a simple and effective technique for the preparation of low-cost biocarbons to be used as the anode of Na-ion batteries.

Biomass Alginate Derived Oxygen-Enriched Carbonaceous Materials with Partially Graphitic Nanolayers for High Performance Anodes in Lithium-Ion Batteries

Lithium-ion batteries with high reversible capacity, high-rate capability, and extended cycle life are vital for future consumer electronics and renewable energy storage. There is a great deal of interest in developing novel types of carbonaceous materials to boost lithium storage properties due to the inadequate properties of conventional graphite anodes. In this study, we describe a facile and low-cost approach for the synthesis of oxygen-doped hierarchically porous carbons with partially graphitic nanolayers (Alg-C) from pyrolyzed Na-alginate biopolymers without resorting to any kind of activation step. The obtained Alg-C samples were analyzed using various techniques, such as X-ray diffraction, Raman, X-ray photoelectron spectroscopy, scanning electron microscope, and transmission electron microscope, to determine their structure and morphology. When serving as lithium storage anodes, the as-prepared Alg-C electrodes have outstanding electrochemical features, such as a high-rate capability (120 mAh g^-1 at 3000 mA g^-1) and extended cycling lifetimes over 5000 cycles. The post-cycle morphologies ultimately provide evidence of the distinct structural characteristics of the Alg-C electrodes. These preliminary findings suggest that alginate-derived carbonaceous materials may have intensive potential for next-generation energy storage and other related applications.