Shear flow of associative polymers in aqueous solutions

Highly Permeable and Liquid-Repellent Textiles with Micro-Nano-Networks for Medical and Health Protection

Current protective clothing often lacks sufficient comfort to ensure efficient performance of healthcare workers. Developing protective textiles with high air and moisture permeability is a potential and effective solution to discomfort of medical protective clothing. However, realizing the facile production of a protective textile that combines safety and comfort remains a challenge. Herein, we report the fabrication of highly permeable protective textiles (HPPT) with micro/nano-networks, using non-solvent induced phase separation synergistically driven by CaCl2 and fluorinated polyurethane, combined with spraying technique. The HPPT demonstrates excellent liquid repellency and comfort, ensuring high safety and a dry microenvironment for the wearer. The textile exhibits not only a high hydrostatic pressure (12.86 kPa) due to its tailored small mean pore size (1.03 μm) and chemical composition, but also demonstrates excellent air permeability (14.24 mm s-1) and moisture permeability (7.92 kg m-2 d-1) owing to the rational combination of small pore size and high porosity (69%). The HPPT offers superior comfort compared to the commercially available protective materials. Additionally, we elucidated a molding mechanism synergistically inducted by diffusion-dissolution-phase separation. This research provides an innovative perspective on enhancing the comfort of medical protective clothing and offers theoretical support for regulating of pore structure during phase separations.

Influence of carboxyl content on the rheological properties and printability of oxidized starch for 3D printing applications

With the rapid development of 3D printing technology, the development of starch gels based on 3D printing with excellent printing properties has attracted great attention. This study successfully prepared four types of oxidized starch (OMS) with varying carboxyl group contents (0.203 %, 0.612 %, 1.043 %, and 1.278 %) by controlling the amount of sodium hypochlorite. Rheological analysis of these OMS gels revealed typical shear-thinning behavior and excellent structural recovery during heating shear across various concentrations. As the concentration of OMS increased, key parameters such as consistency index (K), storage modulus (G'), yield stress (τy), and flow stress (τf) also increased, signifying enhanced molecular chain entanglement and densification with reduced digestibility. Conversely, at a constant concentration, increasing carboxyl group content led to decreased K, G', τy, and τf values due to molecular chain degradation, resulting in diminished aggregation and increased network pore size. Notably, OMS gels demonstrated favorable printability within a specific range of G' (4314.0-6690.0 Pa), τy (1254.8-2697.5 Pa), and τf (822.3-2296.3 Pa). Meanwhile, oxidized starch (OMS2 and OMS3) gels exhibited exceptional printability, attributed to appropriate molecular chain length and carboxyl content, which promoted sufficient physical crosslinking. These findings provided theoretical insights and foundational data for developing 3D printable starch-based materials.

Temperature Sensitive Pluronic F127‐Based Gels Incorporating Natural Therapeutic Agents

Pluronic F127 copolymer is used as the main component to design injectable gels for therapeutic applications. Xanthan gum is added as an excipient to improve gel properties under physiological conditions. A polyphenol bioactive compound, curcumin, is selected as therapeutic agent with beneficial effects on metabolism and many diseases. The encapsulation efficiency and stability of formulations are investigated in an aqueous environment and in acetic acid solutions. The interactions between the hydrophobic polyphenol and the polymer matrix are investigated through rheology, DLS, and FTIR spectroscopy. The viscoelasticity of gels, correlated with the network structure, is influenced by xanthan gum or acetic acid addition. FTIR analysis of curcumin incorporated into the gel provides the evidence for interaction of the phenyl rings of both keto‐enol and di‐keto tautomers with the polymeric matrix. The spherical curcumin‐encapsulated micelles provided antioxidant properties. The kinetics of curcumin release from the Pluronic F127‐based gels suggests anomalous transport phenomena controlled by diffusion through the network and hydrodynamic effects. Both gel and lyophilized form of micellar encapsulated curcumin composites exhibited good stability for long‐term storage under ambient conditions.

Self-healing injectable hydrogels incorporating hyaluronic acid and phytic acid: Rheological insights and implications for regenerative medicine

Eying the increasing impact of hyaluronic acid (HA) and its multifaceted applications, this study employs a non-toxic, one-pot strategy to develop injectable, self-healing hydrogels for biomedical applications. Phytic acid (PA), a plant-derived organic acid with high biocompatibility and numerous hydroxyl groups, can act as a cross-linking agent to form hydrogen-bonded networks with the HA chains. The study examined the optimal mass ratio of HA to PA to achieve superior hydrogel performance. Fourier transform infrared spectroscopy, rheological studies, and thermal analysis confirmed the successful formation of the hydrogels, which exhibited injectability, rapid self-healing, malleability, and elasticity. The investigation of different compositions revealed a sensitive influence of PA on the self-assembly phenomena of HA during flow. SEM cross-section images of the freeze-dried gels revealed a porous surface in the form of an interconnected network of microchannels. In addition, the hydrogel exhibits good tissue adhesion properties and promotes cell proliferation in biocompatibility tests on human gingival fibroblasts. The significance of this study lies in the ability of the proposed materials to be injected, to conform to the complex 3D structure of host tissues as well as their ability to recover after damage, indicating significant potential as scaffolds for wound healing.

Recent Advances in Poly(vinyl alcohol)-Based Hydrogels

Poly(vinyl alcohol) (PVA) is a versatile synthetic polymer, used for the design of hydrogels, porous membranes and films. Its solubility in water, film- and hydrogel-forming capabilities, non-toxicity, crystallinity and excellent mechanical properties, chemical inertness and stability towards biological fluids, superior oxygen and gas barrier properties, good printability and availability (relatively low production cost) are the main aspects that make PVA suitable for a variety of applications, from biomedical and pharmaceutical uses to sensing devices, packaging materials or wastewater treatment. However, pure PVA materials present low stability in water, limited flexibility and poor biocompatibility and biodegradability, which restrict its use alone in various applications. PVA mixed with other synthetic polymers or biomolecules (polysaccharides, proteins, peptides, amino acids etc.), as well as with inorganic/organic compounds, generates a wide variety of materials in which PVA's shortcomings are considerably improved, and new functionalities are obtained. Also, PVA's chemical transformation brings new features and opens the door for new and unexpected uses. The present review is focused on recent advances in PVA-based hydrogels.

Evaluation of hyaluronic acid-polymacrolactone hydrogels with 3D printing capacity

The implementation of personalized patches, tailored to individual genetic profiles and containing specific amounts of bioactive substances, has the potential to produce a transformative impact within the medical sector. There are several methods of designing scaffolds in the context of personalized medicine, with three-dimensional (3D) printing emerging as a pivotal technique. This innovative approach can be used to construct a wide variety of pharmaceutical dosage forms, characterized by variations in shape, release profile, and drug combinations, allowing precise dose individualization and the incorporation of multiple therapeutic agents. To expand the potential and applicability of personalized medicine, particularly with regards to indomethacin (IND), a drug necessitating individualized dosing, this study proposes the development of new transdermal delivery systems for IND based on hyaluronic acid and a polylactone synthesized within our research group, namely poly(ethylene brasilate-co-squaric acid) (PEBSA). The obtained systems were characterized in terms of their swelling capacity, rheological behavior, and morphological characteristics that highlighted the formation of stable three-dimensional networks. To impart specific shape and geometry to the structures, multi-component systems based on PEBSA, HA, and methacrylate gelatin were obtained. The scaffolds were loaded with IND and subsequently 3D printed. The release capacity of IND and its dependence on the relative ratios of the components comprising the scaffold composition were highlighted. The cytocompatibility studies revealed the successful development of biocompatible and noncytotoxic systems.

Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels

Over the last decade, efforts have been oriented toward the development of suitable gels for 3D printing, with controlled morphology and shear-thinning behavior in well-defined conditions. As a multidisciplinary approach to the fabrication of complex biomaterials, 3D bioprinting combines cells and biocompatible materials, which are subsequently printed in specific shapes to generate 3D structures for regenerative medicine or tissue engineering. A major interest is devoted to the printing of biomimetic materials with structural fidelity after their fabrication. Among some requirements imposed for bioinks, such as biocompatibility, nontoxicity, and the possibility to be sterilized, the nondamaging processability represents a critical issue for the stability and functioning of the 3D constructs. The major challenges in the field of printable gels are to mimic at different length scales the structures existing in nature and to reproduce the functions of the biological systems. Thus, a careful investigation of the rheological characteristics allows a fine-tuning of the material properties that are manufactured for targeted applications. The fluid-like or solid-like behavior of materials in conditions similar to those encountered in additive manufacturing can be monitored through the viscoelastic parameters determined in different shear conditions. The network strength, shear-thinning, yield point, and thixotropy govern bioprintability. An assessment of these rheological features provides significant insights for the design and characterization of printable gels. This review focuses on the rheological properties of printable bioinspired gels as a survey of cutting-edge research toward developing printed materials for additive manufacturing.

The Effect of Shear on the Properties of an Associated Polymer Solution for Oil Displacement

Polymer flooding is one of the techniques used to enhance oil recovery from depleted hydrocarbon reservoirs. Although this technology is popular for this application, the shearing effect in the injection process causes poor performance, which is an obstacle to meeting the needs of the formation. An experimental evaluation of the rheological properties, viscoelasticity, hydrodynamic size, static adsorption, and seepage characteristics of the associated polymer solution before and after shearing was conducted to determine the influence of shearing on the polymer solution. The results show that the effect of shear on the polymer was irreversible, and the properties of the polymer solution damaged by shear were attenuated. After the critical associating concentration, the associated polymer can recover its solution properties through hydrophobic association, which can improve the shear resistance of the polymer solution and make its own rheological law and reduce the viscoelastic change. Although the hydrodynamic size, viscoelasticity, and adsorption capacity of the polymer solution after shear failure decreased, strong flow resistance during porous media seepage and mobility control was achieved. Improving the shear resistance of the polymer solution by increasing the intermolecular force is proposed to develop new polymer systems for subsequent oil displacement.

Bioinspired Hydrogels as Platforms for Life-Science Applications: Challenges and Opportunities

Hydrogels, as interconnected networks (polymer mesh; physically, chemically, or dynamic crosslinked networks) incorporating a high amount of water, present structural characteristics similar to soft natural tissue. They enable the diffusion of different molecules (ions, drugs, and grow factors) and have the ability to take over the action of external factors. Their nature provides a wide variety of raw materials and inspiration for functional soft matter obtained by complex mechanisms and hierarchical self-assembly. Over the last decade, many studies focused on developing innovative and high-performance materials, with new or improved functions, by mimicking biological structures at different length scales. Hydrogels with natural or synthetic origin can be engineered as bulk materials, micro- or nanoparticles, patches, membranes, supramolecular pathways, bio-inks, etc. The specific features of hydrogels make them suitable for a wide variety of applications, including tissue engineering scaffolds (repair/regeneration), wound healing, drug delivery carriers, bio-inks, soft robotics, sensors, actuators, catalysis, food safety, and hygiene products. This review is focused on recent advances in the field of bioinspired hydrogels that can serve as platforms for life-science applications. A brief outlook on the actual trends and future directions is also presented.