Assessment of MRI issues for a new cerebral spinal fluid shunt, gravitational valve (GV)

Individualized and accurate SAR characterization method based on equivalent circuit model for MRI system

PURPOSE

To protect patients from RF heating in MRI scan, this work proposes an accurate and patient-specific whole-body specific absorption rate (SAR) characterization method based on an equivalent circuit model. Compared to the standard pulse energy method defined in NEMA MS 8-2016, this method avoids the complexity of integrating flux loops and has the potential to be easily implemented in MRI scanners.

THEORY AND METHODS

In this study, we use an equivalent parallel circuit to model the power distribution on the transmit coil and subject. The coil and subject equivalent resistances are fitted by the frequency response functions of reflection coefficient and are thereafter used to calculate the power ratio between them. To assess the accuracy of this method, we measured the subject absorbed power of 2 phantoms and 5 volunteers and compared it with the standard pulse energy method with flux loops.

RESULTS

The resistances, resonant frequencies, and quality factors of the transmit coil are fitted with the equivalent circuit model in both unloaded and loaded conditions. Whole-body SAR of 5 volunteers is measured at 2 different landmarks. In addition, the relationship between SAR and the working frequencies of the transmit coil is measured and analyzed. The subject absorbed power measured by the proposed method demonstrates good accuracy (RMS error and maximum error of 3.77% and 9.47%, respectively) relative to the flux loop method.

CONCLUSION

The equivalent circuit model-based method enables individualized, accurate, and simplified SAR characterization for clinical applications and research with moderate implementation complexity.

Evaluation of smartphone-integrated magnetometers in detection of safe electromagnetic devices for use near programmable shunt valves: a proof-of-concept study

OBJECTIVE

External magnetic forces can have an impact on programmable valve mechanisms and potentially alter the opening pressure. As wearable technology has begun to permeate mainstream living, there is a clear need to provide information regarding safety of these devices for use near a programmable valve (PV). The aim of this study was to evaluate the magnetic fields of reference devices using smartphone-integrated magnetometers and compare the results with published shunt tolerances.

METHODS

Five smartphones from different manufacturers were used to evaluate the magnetic properties of various commonly used (n = 6) and newer-generation (n = 10) devices using measurements generated from the internal smartphone magnetometers. PV tolerance testing using calibrated magnets of varying field strengths was also performed by smartphone magnetometers.

RESULTS

All tested smartphone-integrated magnetometers had a factory sensor saturation point at around 5000 µT or 50 Gauss (G). This is well below the threshold at which a magnet can potentially deprogram a shunt, based on manufacturer reports as well as the authors' experimental data with a threshold of more than 300 G. While many of the devices did saturate the smartphone sensors at the source, the magnetic flux density of the objects decreases significantly at 2 inches.

CONCLUSIONS

The existence of an upper limit on the magnetometers of all the smartphones used, although well below the published deprogramming threshold for modern programmable valves, does not allow us to give precise recommendations on those devices that saturate the sensor. Based on the authors' experimental data using smartphone-integrated magnetometers, they concluded that devices that measure < 40 G can be used safely close to a PV.

Breast Tissue Expander With Radiofrequency Identification Port: Assessment of MRI Issues

OBJECTIVE. Breast tissue expanders with magnetic ports are MRI unsafe, preventing patients from benefiting from the diagnostic capabilities of MRI. A tissue expander was recently developed with a radiofrequency identification (RFID) port used for needle location and expansion that may be acceptable for a patient undergoing MRI. The purpose of this investigation was to evaluate MRI issues using standardized techniques and well-accepted methods for this tissue expander with RFID port. MATERIALS AND METHODS. The breast tissue expander with RFID port (Motiva Flora Tissue Expander, Establishment Labs) was assessed for magnetic field interactions (translational attraction and torque, 3 T), MRI-related heating (1.5 T/64 MHz and 3 T/128 MHz), artifacts (3 T), and functional changes associated with different MRI conditions (1.5 T/64 MHz and 3 T/128 MHz). RESULTS. Magnetic field interactions were minor (deflection angle of 2° and no torque) and thus will not pose a risk. At 1.5 T/64 MHz and 3 T/128 MHz, the highest temperature elevations (1.7°C and 1.9°C, respectively) were physiologically inconsequential. The tissue expander with RFID port exhibited relatively small artifacts on MRI. Exposures of the tissue expander with RFID port to different MRI conditions did not impact the ability to localize the RFID port or to read the electronic serial number. CONCLUSION. The findings indicated that this tissue expander with RFID port is "MR Conditional" for a patient referred for MRI at 1.5 T or 3 T. Importantly, the relatively small artifact associated with this implant offers potential advantages for patients undergoing MRI compared with tissue expanders that have magnetic ports that create substantial signal losses and distortions on MR images.

MRI safety and imaging artifacts evaluated for a cannulated screw used for guided growth surgery

OBJECTIVE

Percutaneously-placed cannulated screws are the implant of choice for treatment of skeletal deformity associated with growing children that have spastic cerebral palsy (CP). These patients often require MRI examinations throughout their childhood to evaluate associated comorbidities and frequently for research protocols. There are concerns related to the use of MRI when metallic implants are present. Therefore, this study characterized MRI safety and imaging artifacts for a cannulated screw commonly used for guided growth.

METHODS

Standardized and well-accepted in vitro techniques were used to evaluate a cannulated screw (4.5 mm diameter x 50 mm length, 316 L stainless steel) for MRI issues. Static magnetic field interactions (i.e., translational attraction and torque) and artifacts were tested at 3-Tesla. Radiofrequency-related heating was assessed at 1.5-Tesla/64-MHz and 3-Tesla/128-MHz using relatively high levels of RF energy (whole-body averaged specific absorption rates of 2.7 W/kg and 2.9-W/kg, respectively). Artifacts were determined using T1-weighted, spin echo and gradient echo pulse sequences.

RESULTS

The cannulated screw exhibited minor magnetic field interactions (14° deflection angle, no torque). The highest temperature changes at 1.5-Tesla/64-MHz and 3-Tesla/128-MHz MRI were 2.1 °C and 2.4 °C, respectively. The maximum artifact size on a gradient echo sequence extended 20 mm relative to the dimensions of the implant.

CONCLUSIONS

The in vitro tests performed on the cannulated screw indicated that there were no substantial concerns with respect to the use of 1.5- and 3-Tesla MRI. Therefore, a patient with this cannulated screw can safely undergo MRI by following specific conditions to ensure safety.

Assessment of MRI issues at 1.5 T for the Temperature Logger Implant

PURPOSE

The Temperature Logger Implant is a newly developed device that is capable of providing data for animal studies on thermoregulatory function, hibernation, hypothermia, and general health. During research, it may be necessary to conduct a magnetic resonance imaging (MRI) examination on an animal with this device implanted to assess anatomical changes or other conditions. Notably, this new device was specially designed to be unaffected by the electromagnetic fields used for MRI. Therefore, to verify that there would be no problems related to MRI, the purpose of this investigation was to evaluate MRI-related issues for the Temperature Logger Implant.

METHODS

Tests were performed on the Temperature Logger Implant using well-accepted techniques to evaluate magnetic field interactions (translational attraction and torque, 1.5 T), MRI-related heating (whole body averaged specific absorption rate, 2.9 W/kg), artifacts (T1-weighted, spin echo and gradient echo pulse sequences), and functional changes related to exposure to eight different imaging conditions.

RESULTS

Magnetic field interactions were relatively low (deflection angle 4°, no torque) and heating was minor (highest temperature rise, > 1.1 °C) indicating that these factors will not pose a hazard to an animal. The largest artifact (gradient echo pulse sequence) extended 10 mm from the size and shape of the Temperature Logger Implant. Exposure to the eight different conditions at 1.5 T/ 64 MHz did not alter or damage the operational aspects of the device.

CONCLUSIONS

The findings demonstrated that MRI can be performed safely on an animal with this new Temperature Logger Implant and, thus, this device is deemed "MR Conditional" (i.e., using current labeling terminology), according to the conditions used in this investigation.