1
|
Preparation of a PLGA-coated porous bioactive glass scaffold with improved mechanical properties for bone tissue engineering approaches. REGENERATIVE ENGINEERING AND TRANSLATIONAL MEDICINE 2021. [DOI: 10.1007/s40883-021-00196-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
2
|
Bioactivity and hemocompatibility of sol–gel bioactive glass synthesized under different catalytic conditions. NEW J CHEM 2020. [DOI: 10.1039/d0nj02445g] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
In bioactive glass synthesis by sol–gel method, HCl catalyst induces biocompatible wollastonite crystallization and supports higher apatite formation.
Collapse
|
3
|
Bone regeneration using β-tricalcium phosphate (β-TCP) block with interconnected pores made by setting reaction of β-TCP granules. J Biomed Mater Res A 2019; 108:625-632. [PMID: 31742920 DOI: 10.1002/jbm.a.36842] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2019] [Revised: 11/07/2019] [Accepted: 11/11/2019] [Indexed: 02/02/2023]
Abstract
We fabricated an interconnected dual porous β-tricalcium phosphate (β-TCP) block via a setting reaction of β-TCP granules. This β-TCP block was unique because it exhibits a fully interconnected macroporous structure with micropores in the walls surrounding macropores and a roughened surface. The porosity and diametral tensile strength of the resulting product were 58.1 ± 1.7% and 1.4 ± 0.2 MPa, respectively. Rabbit distal femur bone defects were reconstructed using the porous β-TCP block and the efficacy of the porous β-TCP block as an artificial bone substitute was evaluated histomorphometrically. For a dense β-TCP control, 4 weeks following implantation, only 0.2 ± 0.1% of the β-TCP was resorbed, and the amount of newly formed bone was limited (0.1 ± 0.1%), whereas when the defect was reconstructed with porous β-TCP, 9.2 ± 3.1% was resorbed, and the amount of new bone was 18.9 ± 5.5%. This represents an approximately 50-fold enhancement in resorption and a 200-fold increase in bone formation for our porous β-TCP block. Therefore, interconnected dual porous β-TCP made via β-TCP granule setting has good potential as an artificial bone substitute.
Collapse
|
4
|
Bioactive Glasses and Glass-Ceramics for Healthcare Applications in Bone Regeneration and Tissue Engineering. MATERIALS (BASEL, SWITZERLAND) 2018; 11:E2530. [PMID: 30545136 PMCID: PMC6316906 DOI: 10.3390/ma11122530] [Citation(s) in RCA: 94] [Impact Index Per Article: 15.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/10/2018] [Revised: 12/04/2018] [Accepted: 12/06/2018] [Indexed: 12/12/2022]
Abstract
The discovery of bioactive glasses (BGs) in the late 1960s by Larry Hench et al. was driven by the need for implant materials with an ability to bond to living tissues, which were intended to replace inert metal and plastic implants that were not well tolerated by the body. Among a number of tested compositions, the one that later became designated by the well-known trademark of 45S5 Bioglass® excelled in its ability to bond to bone and soft tissues. Bonding to living tissues was mediated through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. This feature represented a remarkable milestone, and has inspired many other investigations aiming at further exploring the in vitro and in vivo performances of this and other related BG compositions. This paradigmatic example of a target-oriented research is certainly one of the most valuable contributions that one can learn from Larry Hench. Such a goal-oriented approach needs to be continuously stimulated, aiming at finding out better performing materials to overcome the limitations of the existing ones, including the 45S5 Bioglass®. Its well-known that its main limitations include: (i) the high pH environment that is created by its high sodium content could turn it cytotoxic; (ii) and the poor sintering ability makes the fabrication of porous three-dimensional (3D) scaffolds difficult. All of these relevant features strongly depend on a number of interrelated factors that need to be well compromised. The selected chemical composition strongly determines the glass structure, the biocompatibility, the degradation rate, and the ease of processing (scaffolds fabrication and sintering). This manuscript presents a first general appraisal of the scientific output in the interrelated areas of bioactive glasses and glass-ceramics, scaffolds, implant coatings, and tissue engineering. Then, it gives an overview of the critical issues that need to be considered when developing bioactive glasses for healthcare applications. The aim is to provide knowledge-based tools towards guiding young researchers in the design of new bioactive glass compositions, taking into account the desired functional properties.
Collapse
|
5
|
Fabrication of self-setting β-TCP granular cement using β-TCP granules and sodium hydrogen sulfate solution. J Biomater Appl 2018; 33:630-636. [PMID: 30376757 DOI: 10.1177/0885328218808015] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Bridging beta-tricalcium phosphate (β-TCP) granules with dicalcium phosphate dihydrate (DCPD) creates a porous, interconnected β-TCP granular cement (GC) that is useful for reconstructing bone defects: the interconnected pores can accelerate new bone ingrowth and the set cement prevents the loss of granules from the bone defect area. However, the setting time of β-TCP GC in an acidic calcium phosphate solution is too short (<1 min) for handling in clinical applications, such as in orthopedic surgery. To address this issue, we sought to optimize the setting time of β-TCP GC using β-TCP granules and NaHSO4 solution, as [Formula: see text] is a known inhibitor of DCPD formation. Both DCPD and calcium sulfate dihydrate (CSD) precipitated on the surface of β-TCP granules and bridged β-TCP granules to one another. Increasing NaHSO4 concentration (from 0.5 mol/L to 5 mol/L) led to an increase in the amount of precipitant from 2.6 ± 0.2% to 21.6 ± 1.3% for DCPD and 1.3 ± 0.3% to 10.1 ± 0.5% for CSD. The diametral tensile strength was also increased from 0.03 ± 0.01 MPa to 2.0 ± 0.1 MPa with increasing NaHSO4 concentration. When 2 mol/L NaHSO4 solution was used as the liquid phase, setting time became 5.3 ± 0.2 min, which is suitable for handling in clinical applications to repair bone defects. In conclusion, β-TCP GC using NaHSO4 solution as the liquid phase has good potential value as bone augmentation cement.
Collapse
|
6
|
Porous Polyethylene Coated with Functionalized Hydroxyapatite Particles as a Bone Reconstruction Material. MATERIALS 2018; 11:ma11040521. [PMID: 29596358 PMCID: PMC5951367 DOI: 10.3390/ma11040521] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/24/2018] [Revised: 03/26/2018] [Accepted: 03/27/2018] [Indexed: 12/28/2022]
Abstract
In this study, porous polyethylene scaffolds were examined as bone substitutes in vitro and in vivo in critical-sized calvarial bone defects in transgenic Sprague-Dawley rats. A microscopic examination revealed that the pores appeared to be interconnected across the material, making them suitable for cell growth. The creep recovery behavior of porous polyethylene at different loads indicated that the creep strain had two main portions. In both portions, strain increased with increased applied load and temperature. In terms of the thermographic behavior of the material, remarkable changes in melting temperature and heat fusion were revealed with increased the heating rates. The tensile strength results showed that the material was sensitive to the strain rate and that there was adequate mechanical strength to support cell growth. The in vitro cell culture results showed that human bone marrow mesenchymal stem cells attached to the porous polyethylene scaffold. Calcium sulfate–hydroxyapatite (CS–HA) coating of the scaffold not only improved attachment but also increased the proliferation of human bone marrow mesenchymal stem cells. In vivo, histological analysis showed that the study groups had active bone remodeling at the border of the defect. Bone regeneration at the border was also evident, which confirmed that the polyethylene acted as an osteoconductive bone graft. Furthermore, bone formation inside the pores of the coated polyethylene was also noted, which would enhance the process of osteointegration.
Collapse
|
7
|
|
8
|
Mechanical and cytotoxicity evaluation of nanostructured hydroxyapatite-bredigite scaffolds for bone regeneration. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2016; 68:603-612. [DOI: 10.1016/j.msec.2016.06.030] [Citation(s) in RCA: 36] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2016] [Revised: 05/13/2016] [Accepted: 06/09/2016] [Indexed: 11/29/2022]
|
9
|
Size Control in Porosity of Hydroxyapatite Using a Mold of Polyurethane Foam. J Inorg Organomet Polym Mater 2016. [DOI: 10.1007/s10904-016-0426-3] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
10
|
A Biomimetic Material with a High Bio-responsibility for Bone Reconstruction and Tissue Engineering. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2016; 22:153-63. [PMID: 20546681 DOI: 10.1163/092050609x12583524936191] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
A biomimetic composite was prepared using type-I collagen as the matrix, and particles of sol-gel-derived bioactive glass (58S), hyaluronic acid and phosphatidylserine as additives. The material has an interconnected 3-D porous structure with a porosity > 85%. When incubated in simulated body fluid (SBF), the composite induced the formation of microcrystals of bone-like hydroxyapatite (HA), suggesting good bioactive properties. During the in vitro cell-culture experiment, MC3T3-E1 cells adhered to, migrated and spread on the surface of the porous composite. The material was employed to repair a 10-mm defect in a rabbit's radius. The composite was gradually degraded within 8 weeks and replaced by new bone. After 12 weeks, the bone marrow cavity was restored and the Haversian canal was noted from the histological observation. The biomimetic composite is a potential scaffold material for bone reconstruction and bone tissue engineering.
Collapse
|
11
|
Sol-Gel Derived Mg-Based Ceramic Scaffolds Doped with Zinc or Copper Ions: Preliminary Results on Their Synthesis, Characterization, and Biocompatibility. Int J Biomater 2016; 2016:3858301. [PMID: 26981124 PMCID: PMC4769780 DOI: 10.1155/2016/3858301] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2015] [Accepted: 01/11/2016] [Indexed: 12/22/2022] Open
Abstract
Glass-ceramic scaffolds containing Mg have shown recently the potential to enhance the proliferation, differentiation, and biomineralization of stem cells in vitro, property that makes them promising candidates for dental tissue regeneration. An additional property of a scaffold aimed at dental tissue regeneration is to protect the regeneration process against oral bacteria penetration. In this respect, novel bioactive scaffolds containing Mg(2+) and Cu(2+) or Zn(2+), ions known for their antimicrobial properties, were synthesized by the foam replica technique and tested regarding their bioactive response in SBF, mechanical properties, degradation, and porosity. Finally their ability to support the attachment and long-term proliferation of Dental Pulp Stem Cells (DPSCs) was also evaluated. The results showed that conversely to their bioactive response in SBF solution, Zn-doped scaffolds proved to respond adequately regarding their mechanical strength and to be efficient regarding their biological response, in comparison to Cu-doped scaffolds, which makes them promising candidates for targeted dental stem cell odontogenic differentiation and calcified dental tissue engineering.
Collapse
|
12
|
Three dimensional biphasic calcium phosphate nanocomposites for load bearing bioactive bone grafts. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2016; 59:375-383. [DOI: 10.1016/j.msec.2015.10.027] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/15/2015] [Revised: 08/26/2015] [Accepted: 10/09/2015] [Indexed: 11/23/2022]
|
13
|
Calcium Orthophosphate-Containing Biocomposites and Hybrid Biomaterials for Biomedical Applications. J Funct Biomater 2015; 6:708-832. [PMID: 26262645 PMCID: PMC4598679 DOI: 10.3390/jfb6030708] [Citation(s) in RCA: 95] [Impact Index Per Article: 10.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2015] [Revised: 07/31/2015] [Accepted: 08/01/2015] [Indexed: 12/30/2022] Open
Abstract
The state-of-the-art on calcium orthophosphate (CaPO4)-containing biocomposites and hybrid biomaterials suitable for biomedical applications is presented. Since these types of biomaterials offer many significant and exciting possibilities for hard tissue regeneration, this subject belongs to a rapidly expanding area of biomedical research. Through the successful combinations of the desired properties of matrix materials with those of fillers (in such systems, CaPO4 might play either role), innovative bone graft biomaterials can be designed. Various types of CaPO4-based biocomposites and hybrid biomaterials those are either already in use or being investigated for biomedical applications are extensively discussed. Many different formulations in terms of the material constituents, fabrication technologies, structural and bioactive properties, as well as both in vitro and in vivo characteristics have been already proposed. Among the others, the nano-structurally controlled biocomposites, those containing nanodimensional compounds, biomimetically fabricated formulations with collagen, chitin and/or gelatin, as well as various functionally graded structures seem to be the most promising candidates for clinical applications. The specific advantages of using CaPO4-based biocomposites and hybrid biomaterials in the selected applications are highlighted. As the way from a laboratory to a hospital is a long one and the prospective biomedical candidates have to meet many different necessities, the critical issues and scientific challenges that require further research and development are also examined.
Collapse
|
14
|
Macroporous biphasic calcium phosphate scaffolds reinforced by poly-L-lactic acid/hydroxyapatite nanocomposite coatings for bone regeneration. Biochem Eng J 2015. [DOI: 10.1016/j.bej.2015.02.026] [Citation(s) in RCA: 53] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
|
15
|
Toughening and functionalization of bioactive ceramic and glass bone scaffolds by biopolymer coatings and infiltration: a review of the last 5 years. Expert Rev Med Devices 2014; 12:93-111. [PMID: 25331196 DOI: 10.1586/17434440.2015.958075] [Citation(s) in RCA: 77] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Inorganic scaffolds with high interconnected porosity based on bioactive glasses and ceramics are prime candidates for applications in bone tissue engineering. These materials however exhibit relatively low fracture strength and high brittleness. A simple and effective approach to improve the toughness is to combine the basic scaffold structure with polymer coatings or through the formation of interpenetrating polymer-bioactive ceramic microstructures. The polymeric phase can additionally serve as a carrier for growth factors and therapeutic drugs, thus adding biological functionalities. The present paper reviews the state-of-the art in the field of polymer coated and infiltrated bioactive inorganic scaffolds. Based on the notable combination of bioactivity, improved mechanical properties and drug or growth factor delivery capability, this scaffold type is a candidate for bone and osteochondral regeneration strategies. Remaining challenges for the improvement of the materials are discussed and opportunities to broaden the application potential of this scaffold type are also highlighted.
Collapse
|
16
|
Abstract
The management and reconstruction of damaged or diseased skeletal tissues have remained a significant global healthcare challenge. The limited efficacy of conventional treatment strategies for large bone, cartilage and osteochondral defects has inspired the development of scaffold-based tissue engineering solutions, with the aim of achieving complete biological and functional restoration of the affected tissue in the presence of a supporting matrix. Nevertheless, significant regulatory hurdles have rendered the clinical translation of novel scaffold designs to be an inefficient process, mainly due to the difficulties of arriving at a simple, reproducible and effective solution that does not rely on the incorporation of cells and/or bioactive molecules. In the context of the current clinical situation and recent research advances, this review will discuss scaffold-based strategies for the regeneration of skeletal tissues, with focus on the contribution of bioactive ceramic scaffolds and silk fibroin, and combinations thereof, towards the development of clinically viable solutions.
Collapse
|
17
|
Abstract
Calcium phosphate ceramic scaffolds have been widely investigated for bone tissue engineering due to their excellent biocompatibility and biodegradation. Unfortunately, they have low mechanical properties, which inversely restrict their wide applications in load-bearing bone tissue engineering. In this study, porous Si-doped tri-calcium phosphate (TCP) ceramics with a high porosity (~65%) and with interconnected macrotubes (~0.8mm in diameter) and micropores (5-100 μm) were prepared by firing hydroxyapatite (HA)/ bioactive glass-impregnated acrylontrile butadiene styrene (ABS) templates at 1400 °C. Results indicated that the cylindrical scaffolds had a higher compressive strength than the cubic scaffolds and the smallest cylindrical scaffold had a highest compressive strength (14.68+0.2MPa). Additional studies of cell attachment and MTT cytotoxicity assay proved the bioactivity and biocompatibility of the Si-doped TCP scaffolds.
Collapse
|
18
|
Poly(lactide-co-glycolide acid)/biphasic calcium phosphate composite coating on a porous scaffold to deliver simvastatin for bone tissue engineering. J Drug Target 2013; 21:719-29. [DOI: 10.3109/1061186x.2013.811512] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
|
19
|
Multiple silk coatings on biphasic calcium phosphate scaffolds: effect on physical and mechanical properties and in vitro osteogenic response of human mesenchymal stem cells. Biomacromolecules 2013; 14:2179-88. [PMID: 23745709 DOI: 10.1021/bm400303w] [Citation(s) in RCA: 39] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
Ceramic scaffolds such as biphasic calcium phosphate (BCP) have been widely studied and used for bone regeneration, but their brittleness and low mechanical strength are major drawbacks. We report the first systematic study on the effect of silk coating in improving the mechanical and biological properties of BCP scaffolds, including (1) optimization of the silk coating process by investigating multiple coatings, and (2) in vitro evaluation of the osteogenic response of human mesenchymal stem cells (hMSCs) on the coated scaffolds. Our results show that multiple silk coatings on BCP ceramic scaffolds can achieve a significant coating effect to approach the mechanical properties of native bone tissue and positively influence osteogenesis by hMSCs over an extended period. The silk coating method developed in this study represents a simple yet effective means of reinforcement that can be applied to other types of ceramic scaffolds with similar microstructure to improve osteogenic outcomes.
Collapse
|
20
|
Tailoring properties of microsphere-based poly(lactic-co-glycolic acid) scaffolds. J Biomed Mater Res A 2013; 102:348-57. [PMID: 23533090 DOI: 10.1002/jbm.a.34706] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/02/2012] [Revised: 02/27/2013] [Accepted: 03/05/2013] [Indexed: 11/09/2022]
Abstract
Biodegradable polymer scaffolds are being extensively investigated for uses in tissue engineering because of their versatility in fabrication methods and range of achievable chemical and mechanical properties. In this study, poly(lactic-co-glycolic acid) (PLGA) was used to make various types of microspheres that were processed into porous scaffolds that possessed a wide range of properties. A heat sintering step was used to fuse microspheres together around porogen particles that were subsequently leached out, allowing for a 10-fold increase in mechanical properties over other PLGA scaffolds. The sintering temperature was based on the glass transition temperature that ranged from 43 to 49°C, which was low enough to enable drug loading. Degradation times were observed to be between 30 and 120 days, with an initial compressive modulus ranging from 10 to 100 MPa, and after 5 days of degradation up to 10 MPa was retained. These scaffolds were designed to allow for cell ingrowth, enable drug loading, and have an adjustable compressive modulus to be applicable for soft or hard tissue implants. This study combined well-established methods, such as double emulsion microspheres, polymer sintering, and salt leaching, to fabricate polymer scaffolds useful for different tissue engineering applications.
Collapse
|
21
|
Enabling nanoparticle networking in semicrystalline polymer matrices. ACS APPLIED MATERIALS & INTERFACES 2012; 4:3111-3121. [PMID: 22704007 DOI: 10.1021/am300457y] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Among the physical and chemical attributes of the nanocomposite components and their interactions that contribute to the ultimate material properties, nanoparticle arrangement in the matrix is a key contributing factor that has been targeted through materials choices and processing strategies in numerous previous studies. Often, the desired nanocomposite morphology contains individually dispersed and distributed nanoparticles. In this research, a phase-segregated morphology containing nanoparticle networks was studied. A model nanocomposite system composed of calcium phosphate nanoparticles and a poly(3-hydroxybutyrate) matrix was produced to understand how polymer crystallization and crystal structure can facilitate the formation of a phase-segregated morphology containing nanoparticle networks. Two chemically similar calcium phosphate nanoparticle systems with different shapes, near-spherical and nanofiber, were synthesized for use in the nanocomposites. The different shapes were used independently in nanocomposites in an attempt to understand the effect of the nanoparticle shapes on crystallization-mediated nanoparticle network formation. The resulting nanocomposites were characterized to establish the effects of component interactions on the polymer structure. Additionally from the viscoelastic properties, structure-property relationships in these materials can be defined as a function of nanoparticle shape and concentration. The results of this research suggest that when the nanocomposite components are not strongly interacting, polymer crystallization may be used as a forced assembly method for nanoparticle networks. Such a methodology has applications to the design of functional polymer nanocomposites such as biomedical implant materials and organic photovoltaic materials where judicious choice of nanoparticle-polymer pairs and control of polymer crystal nucleation and growth processes could be used to control the length scale of phase segregation.
Collapse
|
22
|
Copper-releasing, boron-containing bioactive glass-based scaffolds coated with alginate for bone tissue engineering. Acta Biomater 2012; 8:792-801. [PMID: 22040685 DOI: 10.1016/j.actbio.2011.10.013] [Citation(s) in RCA: 65] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2011] [Revised: 09/12/2011] [Accepted: 10/10/2011] [Indexed: 11/26/2022]
Abstract
The aim of this study was to synthesize and characterize new boron-containing bioactive glass-based scaffolds coated with alginate cross-linked with copper ions. A recently developed bioactive glass powder with nominal composition (wt.%) 65 SiO2, 15 CaO, 18.4 Na2O, 0.1 MgO and 1.5 B2O3 was fabricated as porous scaffolds by the foam replica method. Scaffolds were alginate coated by dipping them in alginate solution. Scanning electron microscopy investigations indicated that the alginate effectively attached on the surface of the three-dimensional scaffolds leading to a homogeneous coating. It was confirmed that the scaffold structure remained amorphous after the sintering process and that the alginate coating improved the scaffold bioactivity and mechanical properties. Copper release studies showed that the alginate-coated scaffolds allowed controlled release of copper ions. The novel copper-releasing composite scaffolds represent promising candidates for bone regeneration.
Collapse
|
23
|
Abstract
The state-of-the-art of biocomposites and hybrid biomaterials based on calcium orthophosphates that are suitable for biomedical applications is presented in this review. Since these types of biomaterials offer many significant and exciting possibilities for hard tissue regeneration, this subject belongs to a rapidly expanding area of biomedical research. Through successful combinations of the desired properties of matrix materials with those of fillers (in such systems, calcium orthophosphates might play either role), innovative bone graft biomaterials can be designed. Various types of biocomposites and hybrid biomaterials based on calcium orthophosphates, either those already in use or being investigated for biomedical applications, are extensively discussed. Many different formulations, in terms of the material constituents, fabrication technologies, structural and bioactive properties as well as both in vitro and in vivo characteristics, have already been proposed. Among the others, the nanostructurally controlled biocomposites, those containing nanodimensional compounds, biomimetically fabricated formulations with collagen, chitin and/or gelatin as well as various functionally graded structures seem to be the most promising candidates for clinical applications. The specific advantages of using biocomposites and hybrid biomaterials based on calcium orthophosphates in the selected applications are highlighted. As the way from the laboratory to the hospital is a long one, and the prospective biomedical candidates have to meet many different necessities, this review also examines the critical issues and scientific challenges that require further research and development.
Collapse
|
24
|
Synthesis of nano-bioactive glass–ceramic powders and its in vitro bioactivity study in bovine serum albumin protein. J Mol Struct 2011. [DOI: 10.1016/j.molstruc.2011.05.002] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
25
|
Preparation of porous PLGA microspheres with thermoreversible gel to modulate drug release profile of water-soluble drug: bleomycin sulphate. J Microencapsul 2010; 27:303-13. [PMID: 20128747 DOI: 10.3109/02652040903191818] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Bleomycin sulphate-loaded porous microspheres were prepared using modified solvent evaporation method (w/o/w) using PLGA50:50 as a polymeric system. The prepared microspheres were incorporated in pluronic (F127) based thermoreversible gel to develop a depot formulation. Various process parameters as solvent evaporation temperature and formulation parameters such as surfactant concentration, volume of internal and external phase and drug-to-polymer ratio were optimized for enhancing percentage drug entrapment, percentage drug loading and desired release profile by controlling size and porosity of the microspheres. Microspheres were characterized for particle size, zeta potential, surface morphology, percentage drug loading and in vitro drug release study after incorporated in gel. The formulated microspheres were porous in nature and showed biphasic in vitro drug release profile. The microspheres incorporated in pluronic (F127) gel showed sustained release up to 1 week and may be useful for treatment of squamous cell carcinoma with better therapeutic effect.
Collapse
|
26
|
New processing approaches in calcium phosphate cements and their applications in regenerative medicine. Acta Biomater 2010; 6:2863-73. [PMID: 20123046 DOI: 10.1016/j.actbio.2010.01.036] [Citation(s) in RCA: 166] [Impact Index Per Article: 11.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2009] [Revised: 01/22/2010] [Accepted: 01/25/2010] [Indexed: 11/22/2022]
Abstract
The key feature of calcium phosphate cements (CPCs) lies in the setting reaction triggered by mixing one or more solid calcium phosphate salts with an aqueous solution. Upon mixture, the reaction takes place through a dissolution-precipitation process which is macroscopically observed by a gradual hardening of the cement paste. The precipitation of hydroxyapatite nanocrystals at body or room temperature, and the fact that those materials can be used as self-setting pastes, have for many years been the most attractive features of CPCs. However, the need to develop materials able to sustain bone tissue ingrowth and be capable of delivering drugs and bioactive molecules, together with the continuous requirement from surgeons to develop more easily handling cements, has pushed the development of new processing routes that can accommodate all these requirements, taking advantage of the possibility of manipulating the self-setting CPC paste. It is the goal of this paper to provide a brief overview of the new processing developments in the area of CPCs and to identify the most significant achievements.
Collapse
|
27
|
The degradation properties of co-continuous calcium phosphate polyester composites: insights with synchrotron micro-computer tomography. J R Soc Interface 2010; 7 Suppl 5:S663-74. [PMID: 20538756 DOI: 10.1098/rsif.2010.0014.focus] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
This study investigates the in vitro degradation properties of composites consisting of a porous tricalcium phosphate (TCP) foam filled with degradable poly(dl-lactic acid) (PDLLA) via either in situ polymerization or infiltration. The motivation was to develop a material for bone repair that would be initially mechanically strong and would develop porosity during degradation of one of the components. A thorough analysis of the physical in vitro degradation properties has been conducted and reported by the same authors elsewhere. Synchrotron micro-computer tomography analysis (conducted at ID19, ESRF, Grenoble, France) allowed detailed insights to be gained into the process of the composites' degradation, which was discovered to be strongly influenced by the manufacturing method. The polymer phase of in situ-polymerized TCP-PDLLA degraded as a bulk sample, with faster degradation in the centre of the sample as a whole. In contrast, the polymer phase of infiltrated TCP-PDLLA degraded as individual polymer spheres with faster degradation in the centre of each sphere.
Collapse
|
28
|
The influence hydroxyapatite nanoparticle shape and size on the properties of biphasic calcium phosphate scaffolds coated with hydroxyapatite-PCL composites. Biomaterials 2010; 31:5498-509. [PMID: 20398935 DOI: 10.1016/j.biomaterials.2010.03.058] [Citation(s) in RCA: 193] [Impact Index Per Article: 13.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/05/2010] [Accepted: 03/21/2010] [Indexed: 12/23/2022]
Abstract
We developed a composite biphasic calcium phosphate (BCP) scaffold by coating a nanocomposite layer, consisting of hydroxyapatite (HA) nanoparticles and polycaprolactone (PCL), over the surface of BCP. The effects of HA particle size and shape in the coating layer on the mechanical and biological properties of the BCP scaffold were examined. Micro-computerized tomography studies showed that the prepared scaffolds were highly porous (approximately 91%) with large pore size (400-700 microm) and an interconnected porous network of approximately 100%. The HA nanoparticle (needle shape)-composite coated scaffolds displayed the highest compressive strength (2.1 +/- 0.17 MPa), compared to pure HA/beta-TCP (0.1 +/- 0.05 MPa) and to the micron HA - composite coated scaffolds (0.29 +/- 0.07 MPa). These needle shaped scaffolds also showed enhanced elasticity and similar stress-strain profile to natural bone. Needle shaped coated HA/PCL particles induced the differentiation of primary human bone derived cells, with significant upregulation of osteogenic gene expression (Runx2, collagen type I, osteocalcin and bone sialoprotein) and alkaline phosphatase activity compared to other groups. These properties are essential for enhancing bone ingrowth in load-bearing applications. The developed composite scaffolds possessed superior physical, mechanical, elastic and biological properties rendering them potentially useful for bone tissue regeneration.
Collapse
|
29
|
Non-crystalline composite tissue engineering scaffolds using boron-containing bioactive glass and poly(d,l-lactic acid) coatings. Biomed Mater 2009; 4:055002. [DOI: 10.1088/1748-6041/4/5/055002] [Citation(s) in RCA: 43] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
30
|
Bilayered scaffolds for osteochondral tissue engineering. TISSUE ENGINEERING PART B-REVIEWS 2009; 14:447-64. [PMID: 18844605 DOI: 10.1089/ten.teb.2008.0327] [Citation(s) in RCA: 104] [Impact Index Per Article: 6.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Osteoarthritis (OA) is a prevalent degenerative joint disease that places a significant burden on the socioeconomic efficacy of communities around the world. Tissue engineering repair of articular cartilage in synovial joints represents a potential OA treatment strategy superior to current surgical techniques. In particular, osteochondral tissue engineering, which promotes the simultaneous regeneration of articular cartilage and underlining subchondral bone, may be a clinically relevant approach toward impeding OA progression. The unique and complex functional demands of the two contrasting tissues that comprise osteochondral tissue require the use of bilayered scaffolds to promote individual growth of both on a single integrated implant. This paper reviews the three current bilayered scaffold strategies applied to solve this challenging problem, with a focus on the need for an innovative approach to design and fabrication of new optimized scaffold combinations to reinforce materials science as an important element of osteochondral tissue engineering.
Collapse
|
31
|
Degradation Properties of Co-Continuous Calcium−Phosphate−Polyester Composites. Biomacromolecules 2009; 10:1976-85. [DOI: 10.1021/bm900397d] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
32
|
Fabrication and in Vitro Evaluation of Calcium Phosphate Combined with Chitosan Fibers for Scaffold Structures. J BIOACT COMPAT POL 2009. [DOI: 10.1177/0883911509103784] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
A rapid prototyping and rapid tool technique-based method was developed to fabricate chitosan fiber calcium phosphate cement composites (CF/CPC) for bone tissue engineering scaffold applications. The products were characterized and the in vitro performance with canine bone marrow stem cells (BMCs) on CF/CPC scaffold with controlled fiber structures evaluated. The X-ray diffraction analysis showed that about 91% of the inorganic part of the CF/CPC scaffold was hydroxyapatite (HA) and the variation in CF had little effect on the percentage of HA content. The results from in vitro study demonstrated that the interconnected macropores rapidly formed inside the CF/CPC scaffolds and that the patterns were related to the fiber structures used. The differences in the fiber structures altered the morphology of the BMCs without affecting the proliferation of the BMCs.
Collapse
|
33
|
Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly(lactic-co-glycolic acid). Acta Biomater 2008; 4:638-45. [PMID: 18054297 DOI: 10.1016/j.actbio.2007.10.006] [Citation(s) in RCA: 170] [Impact Index Per Article: 10.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2007] [Revised: 10/10/2007] [Accepted: 10/11/2007] [Indexed: 11/16/2022]
Abstract
Regeneration of bone, cartilage and osteochondral tissues by tissue engineering has attracted intense attention due to its potential advantages over the traditional replacement of tissues with synthetic implants. Nevertheless, there is still a dearth of ideal or suitable scaffolds based on porous biomaterials, and the present study was undertaken to develop and evaluate a useful porous composite scaffold system. Here, hydroxyapatite (HA)/tricalcium phosphate (TCP) scaffolds (average pore size: 500 microm; porosity: 87%) were prepared by a polyurethane foam replica method, followed by modification with infiltration and coating of poly(lactic-co-glycolic acid) (PLGA). The thermal shock resistance of the composite scaffolds was evaluated by measuring the compressive strength before and after quenching or freezing treatment. The porous structure (in terms of pore size, porosity and pore interconnectivity) of the composite scaffolds was examined. The penetration of the bone marrow stromal stem cells into the scaffolds and the attachment of the cells onto the scaffolds were also investigated. It was shown that the PLGA incorporation in the HA/TCP scaffolds significantly increased the compressive strength up to 660 kPa and the residual compressive strength after the freezing treatment decreased to 160 kPa, which was, however, sufficient for the scaffolds to withstand subsequent cell culture procedures and a freeze-drying process. On the other hand, the PLGA coating on the strut surfaces of the scaffolds was rather thin (<5 microm) and apparently porous, maintaining the high open porosity of the HA/TCP scaffolds, resulting in desirable migration and attachment of the bone marrow stromal stem cells, although a thicker PLGA coating would have imparted a higher compressive strength of the PLGA-coated porous HA/TCP composite scaffolds.
Collapse
|
34
|
Abstract
The mechanical behavior under compressive stresses of beta-tricalcium phosphate (beta-TCP) and hydroxyapatite (HA) scaffolds fabricated by direct-write assembly (robocasting) technique is analyzed. Concentrated colloidal inks prepared from beta-TCP and HA commercial powders were used to fabricate porous structures consisting of a 3-D tetragonal mesh of interpenetrating ceramic rods. The compressive strength and elastic modulus of these model scaffolds were determined by uniaxial testing to compare the relative performance of the selected materials. The effect of a 3-week immersion in simulated body fluid (SBF) on the strength of the scaffolds was also analyzed. The results are compared with those reported in the literature for calcium phosphate scaffolds and human bone. The robocast calcium phosphate scaffolds were found to exhibit excellent mechanical performances in terms of strength, especially the HA structures after SBF immersion, indicating a great potential of this type of scaffolds for use in load-bearing bone tissue engineering applications.
Collapse
|