Preparation of highly interconnected porous hydroxyapatite scaffolds by chitin gel-casting

Bioinspired 3D scaffolds with antimicrobial, drug delivery, and osteogenic functions for bone regeneration

A major clinical challenge today is the large number of bone defects caused by diseases or trauma. The development of three-dimensional (3D) scaffolds with adequate properties is crucial for successful bone repair. In this study, we prepared biomimetic mesoporous bioactive glass (MBG)-based scaffolds with and without ceria addition (up to 3 mol %) to explore the biological structure and chemical composition of the marine sponge Spongia Agaricina (SA) as a sacrificial template. Micro-CT examination revealed that all scaffolds exhibited a highly porous structure with pore diameters primarily ranging from 143.5 μm to 213.5 μm, facilitating bone ingrowth. Additionally, smaller pores (< 75 μm), which are known to enhance osteogenesis, were observed. The undoped scaffold displayed the highest open porosity value of 90.83%. Cytotoxicity assessments demonstrated that all scaffolds were noncytotoxic and nongenotoxic toward osteoblast cells. Moreover, scaffolds with higher CeO2 content promoted osteogenic differentiation of dental pulp stem cells, stimulating calcium and osteocalcin secretion. The scaffolds also exhibited antimicrobial and antibiofilm effects against Staphylococcus aureus (S. aureus) as well as drug delivery ability. Our research findings indicated that the combination of MBG, natural biological structure, and the addition of Ce exhibited a synergistic effect on the structure and biological properties of scaffolds for applications in bone tissue engineering.

The response of host blood vessels to graded distribution of macro-pores size in the process of ectopic osteogenesis

Angiogenesis is of great importance to bone regeneration, but it remains a significant challenge to induce sufficient angiogenesis and osteogenesis within bone grafts for large bone defect healing. The aim of this study is to investigate the effects of hydroxyapatite (HA) scaffold via a novel graded pore distribution approach on vascularization and osteoinduction. Two types of graded porous scaffolds were fabricated by sugar templates-leaching techniques: (1) one with large pores of 1100-1250 μm in the center and small pores of 500-650 μm at the periphery (HALS); (2) the other with small pores of 500-650 μm in the center and large pores of 1100-1250 μm at the periphery (HASL). In vivo data showed different pore size distribution had a remarkable impact on blood vessel formation during bone formation, which led to distinct localization of new bone within the defects. After one month of implantation, the diameters of the blood vessels infiltrated on the periphery of HASL were substantially larger than those in the center though the host blood vessels were successful in infiltrating throughout the whole scaffold. In contrast, vascularization within HALS appeared to be poor with very few blood vessels formed in the center, indicating heterogeneous vascularization in the scaffolds. After 3 months of implantation, we found that HASL induced more homogeneous bone formation in the whole bone graft but new bone was only found at the periphery of HALS. This study suggests that the pores size distribution in graded scaffolds cannot only affected early stage vascularization, but also influence late stage bone formation and remodeling. The architecture of larger pores at the periphery of graded scaffold may be capable of enhancing angiogenesis and osteogenesis during large size bone defect healing.

Inverse Opal Scaffolds and Their Biomedical Applications

Three-dimensional porous scaffolds play a pivotal role in tissue engineering and regenerative medicine by functioning as biomimetic substrates to manipulate cellular behaviors. While many techniques have been developed to fabricate porous scaffolds, most of them rely on stochastic processes that typically result in scaffolds with pores uncontrolled in terms of size, structure, and interconnectivity, greatly limiting their use in tissue regeneration. Inverse opal scaffolds, in contrast, possess uniform pores inheriting from the template comprised of a closely packed lattice of monodispersed microspheres. The key parameters of such scaffolds, including architecture, pore structure, porosity, and interconnectivity, can all be made uniform across the same sample and among different samples. In conjunction with a tight control over pore sizes, inverse opal scaffolds have found widespread use in biomedical applications. In this review, we provide a detailed discussion on this new class of advanced materials. After a brief introduction to their history and fabrication, we highlight the unique advantages of inverse opal scaffolds over their non-uniform counterparts. We then showcase their broad applications in tissue engineering and regenerative medicine, followed by a summary and perspective on future directions.

Ectopic osteogenesis and angiogenesis regulated by porous architecture of hydroxyapatite scaffolds with similar interconnecting structure in vivo

The macro-pore sizes of porous scaffold play a key role for regulating ectopic osteogenesis and angiogenesis but many researches ignored the influence of interconnection between macro-pores with different sizes. In order to accurately reveal the relationship between ectopic osteogenesis and macro-pore sizes in dorsal muscle and abdominal cavities of dogs, hydroxyapatite (HA) scaffolds with three different macro-pore sizes of 500–650, 750–900 and 1100–1250 µm were prepared via sugar spheres-leaching process, which also had similar interconnecting structure determined by keeping the d/s ratio of interconnecting window diameter to macro-pore size constant. The permeability test showed that the seepage flow of fluid through the porous scaffolds increased with the increase of macro-pore sizes. The cell growth in three scaffolds was not affected by the macro-pore sizes. The in vivo ectopic implantation results indicated that the macro-pore sizes of HA scaffolds with the similar interconnecting structure have impact not only the speed of osteogenesis and angiogenesis but also the space distribution of newly formed bone. The scaffold with macro-pore sizes of 750–900 µm exhibited much faster angiogenesis and osteogenesis, and much more uniformly distribution of new bone than those with other macro-pore sizes. This work illustrates the importance of a suitable macro-pore sizes in HA scaffolds with the similar interconnecting structure which provides the environment for ectopic osteogenesis and angiogenesis.

Highly porous ceramics based on ultralong hydroxyapatite nanowires

Highly porous ceramics with high biocompatibility are prepared using ultralong hydroxyapatite nanowires and palmitic acid spheres.

Effect of cryomilling times on the resultant properties of porous biodegradable poly(e-caprolactone)/poly(glycolic acid) scaffolds for articular cartilage tissue engineering

The aim of this research is to develop a parametric investigation of the fabrication of poly(e-caprolactone) (PCL)/poly(glycolic acid) (PGA) scaffolds to decipher the influence of cryomilling time on the scaffolds' resultant physical, morphological and mechanical characteristics. Scaffolds were fabricated via solid-state cryomilling to prepare a homogeneous blend along with conventional compression molding and porogen leaching yielding interconnected porous scaffolds. PCL/PGA scaffolds fabricated through this technique demonstrated high porosity at all cryomilling times. Morphological analysis revealed a co-continuous interconnected pore network. While mean pore size decreased, water uptake and compressive properties increased with increasing cryomilling times. Porous scaffolds cryomilled for 12min exhibited a mean pore size within the optimal range for tissue engineering and chondrocyte ingrowth. And the compressive modulus of scaffolds cryomilled for 12, 30 and 60min matched the compressive modulus of human articular cartilage. In addition, scaffolds exhibited water uptake, a key requirement in tissue engineering. A 60 day in vitro degradation study revealed mass loss starting from day 10 and increasing through day 60, while notable reduction in compressive properties was observed. The results indicated that cryomilling times affected the resultant properties of PCL/PGA scaffolds and will be interesting candidates for articular cartilage tissue engineering.

PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: in vitro cell culture studies

In the present study, we examined the potential of using highly porous poly(ε-caprolactone) (PCL)-coated hydroxyapatite (HAp) scaffold derived from cuttlefish bone for bone tissue engineering applications. The cell culture studies were performed in vitro with preosteoblastic MC3T3-E1 cells in static culture conditions. Comparisons were made with uncoated HAp scaffold. The attachment and spreading of preosteoblasts on scaffolds were observed by Live/Dead staining Kit. The cells grown on the HAp/PCL composite scaffold exhibited greater spreading than cells grown on the HAp scaffold. DNA quantification and scanning electron microscopy (SEM) confirmed a good proliferation of cells on the scaffolds. DNA content on the HAp/PCL scaffold was significantly higher compared to porous HAp scaffolds. The amount of collagen synthesis was determined using a hydroxyproline assay. The osteoblastic differentiation of the cells was evaluated by determining alkaline phosphatase (ALP) activity and collagen type I secretion. Furthermore, cell spreading and cell proliferation within scaffolds were observed using a fluorescence microscope.

PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: morphology, mechanical properties and bioactivity

In the present study, poly(ε-caprolactone)-coated hydroxyapatite scaffold derived from cuttlefish bone was prepared. Hydrothermal transformation of aragonitic cuttlefish bone into hydroxyapatite (HAp) was performed at 200°C retaining the cuttlebone architecture. The HAp scaffold was coated with a poly(ε-caprolactone) (PCL) using vacuum impregnation technique. The compositional and morphological properties of HAp and PCL-coated HAp scaffolds were studied by means of X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis. Bioactivity was tested by immersion in Hank's balanced salt solution (HBSS) and mechanical tests were performed at compression. The results showed that PCL-coated HAp (HAp/PCL) scaffold resulted in a material with improved mechanical properties that keep the original interconnected porous structure indispensable for tissue growth and vascularization. The compressive strength (0.88MPa) and the elastic modulus (15.5MPa) are within the lower range of properties reported for human trabecular bones. The in vitro mineralization of calcium phosphate (CP) that produces the bone-like apatite was observed on both the pure HAp scaffold and the HAp/PCL composite scaffold. The prepared bioactive scaffold with enhanced mechanical properties is a good candidate for bone tissue engineering applications.