Nicotine–magnesium aluminum silicate microparticle surface modified with chitosan for mucosal delivery

Neomycin Intercalation in Montmorillonite: The Role of Ion Exchange Capacity and Process Conditions

The study examined the possibility of intercalation of montmorillonite with neomycin in an aqueous drug solution and the factors influencing the effectiveness of this process, such as the ion exchange capacity and process conditions, including the time and temperature of incubation with the drug. X-ray diffractometry (XRD), infrared spectroscopy (FTIR), thermal analysis (DSC/TG), and Zeta potential measurement were used to confirm drug intercalation as well as to investigate the nature of clay-drug interactions. The obtained conjugates with the most favorable physicochemical properties were also tested for antibacterial response against Gram-negative bacteria (Escherichia coli) to confirm that the bactericidal properties of neomycin were retained after intercalation and UV-VIS spectrophotometry was used to examine the kinetics of drug release from the carrier. The results of the conducted research clearly indicate the successful intercalation of neomycin in montmorillonite and indicate the influence of process parameters on the properties of not only the conjugates themselves but also the properties of the intercalated drug, particularly its bactericidal activity. Ultimately, a temperature of 50 °C was found to be optimal for effective drug intercalation and the conjugates obtained within 2 h showed the highest antibacterial activity, indicating the highest potential of the thus-obtained montmorillonite conjugates as neomycin carriers.

Nicotine-magnesium aluminum silicate complexes processed by blending: Characterization for usage as drug carriers in mucoadhesive buccal discs

Complexation of nicotine (NCT) and magnesium aluminum silicate (MAS) has been formed in the dispersions that required multiple preparation steps. In this study, physical blending was used to produce NCT-MAS complexes. NCT, a free-base liquid state form, was adsorbed onto the MAS granules, where the diffusion and intercalation of NCT molecules into the MAS silicate layers occurred. These processes required a minimum of the 7-d-resting period to reach NCT complete distribution. FTIR, XRD, and 29Si NMR suggest that NCT could interact with MAS via hydrogen bonding, water bridging, and ionic electrostatic force. The 12 % NCT-MAS complexes enabled a sustained release of NCT, after a 2-min burst, in pH 6 phosphate buffer through a particle diffusion-controlled mechanism. Buccal discs formulated with NCT-MAS complexes and sodium alginate (SA) as drug carriers and matrix former could control NCT released through drug diffusion and swelling-controlled mechanisms. NCT release and membrane permeation increased with increasing NCT-MAS complexes or decreasing SA concentration. All NCT-MAS-containing buccal discs exhibited mucoadhesive properties related to the swelling characteristics of SA and MAS. Conclusively, NCT-MAS complexes can be produced through an uncomplicated single-step blending process, and the complexes obtained presented a potential to serve as drug carriers in buccal matrix formulations.

Drug release from magnesium aluminium silicate-polyethylene oxide (PEO) nanocomposite matrices: An investigation using the USP III apparatus

This work investigated the use of the USP III apparatus in discriminating simulated fed and fasted conditions as well as ionic strength on veegum-polyethylene (PEO) (called clay-PEO matrices hereafter) matrices. The successful formulations were characterised using differential scanning calorimetry (DSC) and evaluated for their physical properties. Isothermal calorimetry (ITC) was used to evaluate the thermodynamics of the complexation processes. The effect of agitation sequences on the matrices as evaluated from the USP III suggested an increase in polymer content to significantly decrease the burst release experienced using diltiazem hydrochloride (DILT) as a model cationic drug. The manufacturing methods showed superior performance in relation to a decrease in burst release over the physical manufactured counterparts. The clay-PEO matrices also showed robustness (no matrix failure) in up to 0.2 M ionic strength solutions mimicking the upper limit experienced in the GI tract. ITC results revealed that the binding between DILT and PEO was enthalpy and entropy-driven. Furthermore, the binding between veegum and DILT in the presence of PEO was shown to be enthalpy-driven and entropically unfavourable, which was also the case for the binding between veegum and PEO thus giving insights to how the matrices were performing on a molecular level.

A molecular understanding of magnesium aluminium silicate - drug, drug - polymer, magnesium aluminium silicate - polymer nanocomposite complex interactions in modulating drug release: Towards zero order release

This study reports the use of ITC in understanding the thermodynamics occurring for a controlled release system in which complexation has been exploited. In this study, a model drug, propranolol hydrochloride (PPN) was complexed with magnesium aluminium silicate (MAS) and these complexes were used in combination with polyethylene oxide (PEO) as a hydrophilic carrier at various concentrations to sustain the release of PPN. DSC, XRPD, ATR-FTIR and SEM/EDX were successfully used in characterising the produced complexes. 2D- SAXS data patterns for MAS and the produced complexes were shown to be symmetric and circular with the particles showing no preferred orientation at the nanometre scale. ITC studies showed differences between PPN adsorption onto MAS compared with PPN adsorption onto a MAS-PEO mixture. At both temperatures studied the binding affinity K_a was greater for the titration of PPN into the MAS-PEO mixture (5.37E + 04 ± 7.54E + 03 M at 25 °C and 8.63E + 04 ± 6.11E + 03 M at 37 °C), compared to the affinity obtained upon binding between PPN and MAS as previously reported suggesting a stronger binding with implications for the dissolution process. MAS-PPN complexes with the PEO polymer compacts displayed desired manufacturing and formulation properties for a formulator including, reduced plastic recovery therefore potentially reducing the risk of cracking/splitting and on tooling wear, controlled release of PPN at a significantly low (5%) polymer level as well as a zero-order release profile (case II transport) using up to 50% polymer level.

Thermodynamics of clay-drug complex dispersions: Isothermal titration calorimetry and high-performance liquid chromatography

An understanding of the thermodynamics of the complexation process utilized in sustaining drug release in clay matrices is of great importance. Several characterisation techniques as well as isothermal calorimetry were utilized in investigating the adsorption process of a model cationic drug (diltiazem hydrochloride, DIL) onto a pharmaceutical clay system (magnesium aluminium silicate, MAS). X-ray powder diffraction (XRPD), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and optical microscopy confirmed the successful formation of the DIL-MAS complexes. Drug quantification from the complexes demonstrated variable behaviour in the differing media used with DIL degrading to desacetyl diltiazem hydrochloride (DC-DIL) in the 2 M HCl media. Here also, the authors report for the first time two binding processes that occurred for DIL and MAS. A competitor binding model was thus proposed and the thermodynamics obtained suggested their binding processes to be enthalpy driven and entropically unfavourable. This information is of great importance for a formulator as care and consideration should be given with appropriate media selection as well as the nature of binding in complexes.

Real time calorimetric characterisation of clay – drug complex dispersions and particles

•

Single loaded and double loaded MAS-PPN complexes successfully made.

•

ATR-FTIR confirmed adsorption of PPN onto MAS via hydrogen bonding.

•

SEM/EDX showed changes in MAS microstructure upon complexation.

•

Drug recovery varied in three media types.

•

SIM and MIM experiments showed overall change in enthalpy to be exothermic

•

SIM and MIM showed small entropic contribution to the total change in Gibbs free energy.

Isothermal titration calorimetry (ITC) along with attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) and high-performance liquid chromatography (HPLC) were employed to investigate the process of adsorption of propranolol hydrochloride (PPN) onto magnesium aluminium silicate (MAS) and to characterise the MAS-PPN particles formed upon complexation. The composition of MAS was confirmed by infrared (IR) spectroscopy and a calcimeter. The calorimetric results confirmed the binding between PPN and MAS at various pHs and temperatures. The overall change in enthalpy was found to be exothermic with a comparatively small entropic contribution to the total change in Gibbs free energy. These findings suggest that the binding process was enthalpically driven and entropically unfavourable (lower affinity) suggesting hydrogen bonding and electrostatic interactions dominating the interaction. The variation of pH and temperature did not have a great impact on the thermodynamics of the binding process, as observed from the similarity in enthalpy (ΔH), entropy (ΔS) or Gibbs free energy (ΔG). A slight reduction in the binding affinity (K_a) with varing pH and temperature was however observed. SEM/EDX studies showed the occurrence of changes in the microstructural properties of MAS following complexation which may explain the potential of MAS-PPN complexes for controlled drug release promoting pharmaceutical innovation.

In-vitro characterization of buccal iontophoresis: the case of sumatriptan succinate

Buccal administration of sumatriptan succinate might be an interesting alternative to the present administration routes, due to its non-invasiveness and rapid onset of action, but because of its low permeability, a permeation enhancement strategy is required. The aim of this work was then to study, in-vitro, buccal iontophoresis of sumatriptan succinate. Permeation experiments were performed in-vitro across pig esophageal epithelium, a recently proposed model of human buccal mucosa, using vertical diffusion cells. The iontophoretic behavior of the tissue was characterized by measuring its isoelectric point (Na(+) transport number and the electroosmotic flow of acetaminophen determination) and by evaluating tissue integrity after current application. The results obtained confirm the usefulness of pig esophageal epithelium as an in-vitro model membrane for buccal drug delivery. The application of iontophoresis increased sumatriptan transport, proportionally to the current density applied, without tissue damage: electrotransport was the predominant mechanism. Integrating the results of the present work with literature data on the transport of other molecules across the buccal mucosa and across the skin, we can draw a general conclusion: the difference in passive transport across buccal mucosa and across the skin is influenced by permeant lipophilicity and by the penetration pathway. Finally, buccal iontophoretic administration of sumatriptan allows to administer 6mg of the drug in 1h, representing a promising alternative to the current administration routes.

Lysozyme-magnesium aluminum silicate microparticles: Molecular interaction, bioactivity and release studies

The objectives of this study were to investigate the adsorption behavior of lysozyme (LSZ) onto magnesium aluminum silicate (MAS) at various pHs and to characterize the LSZ-MAS microparticles obtained from the molecular interaction between LSZ and MAS. The results showed that LSZ could be bound onto the MAS layers at different pHs, leading to the formation of LSZ-MAS microparticles. The higher preparation pH permitted greater adsorption affinity but a lower adsorption capacity of LSZ onto MAS. LSZ could interact with MAS via hydrogen bonds and electrostatic forces, resulting in the formation of intercalated nanocomposites. The particle size, %LSZ adsorbed, and LSZ release rate of LSZ-MAS microparticles increased when the LSZ-MAS ratio was increased. The secondary structure of LSZ bound onto the MAS layers in microparticles prepared at various pHs was altered compared with that of native LSZ. Moreover, the LSZ extracted from microparticles prepared at pH 4 showed an obvious change in the tertiary structure, leading to a decrease in the biological activity of the LSZ released. These findings suggested that LSZ can strongly interact with MAS to form microparticles that may potentially be used as delivery systems for sustained protein release.