Biomolecule-assisted synthesis of Ag/reduced graphene oxide nanocomposite with excellent electrocatalytic and antibacterial performance

Ag-NP-Decorated Carbon Nanostructures: Synthesis, Characterization, and Antimicrobial Properties

As the global urgency for effective antimicrobial agents intensifies, this work harnesses the widely demonstrated antimicrobial activity of silver nanoparticles (Ag-NPs) and proposes alternative synthesis approaches to metal-organic hybrid systems with antimicrobial activity. In this study, the proposed synthesis route involves decorating metallic nanoparticles into organic substrates without previous doping. The synthesis simultaneously uses polyethylene glycol for three crucial purposes: (1) acting as a mild reducing agent to generate Ag-NPs with a spherical shape and diameters ranging from 10 to just over 20 nm, (2) functioning as a dispersing agent for flakes of commercial nanostructured carbon supports, including reduced graphene oxide (rGO, ID-nano), and commercial carbon nanoplatelets from Sigma-Aldrich (GNPs, Sigma-Aldrich), and (3) serving as a promoter for the homogeneous anchoring of Ag-NPs in the carbon lattice without altering the conformation of the carbon lattice. This intricate interaction involves the π-orbitals from the sp2 hybridization honeycomb and the d-orbitals from the Ag-NPs, leading to the constructive rehybridization of rGO and GNPs. In our study, Ag-NPs/rGO are compared with a support lacking oxygenated groups in the lattice, such as commercial GNPs (Sigma-Aldrich), to produce Ag-NPs/GNPs. This comparison maintains constructive sp2 rehybridization, preserving the characteristic properties of rGO (ID-nano) and graphene nanoplatelets, including commercial GNPs (Sigma-Aldrich). Notably, oxygenated groups from rGO exhibit greater availability for exchanging oxo and hydroxy defects for Ag-NPs compared with GNPs (Sigma-Aldrich). The resulting Ag-NPs/rGO and Ag-NPs/GNP systems are thoroughly physicochemically characterized, employing techniques such as Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, and scanning transmission electron microscopy, revealing the successful integration of Ag-NPs with minimal alteration to the carbon lattice. Subsequent antimicrobial evaluation against Escherichia coli (E. coli) demonstrates significant activity, with Ag-NPs/rGO and Ag-NPs/GNPs registering similar minimum inhibitory concentrations of 50 μg mL-1. This study underscores the potential of our metal-organic hybrid systems as antimicrobial agents and provides insights into the constructive rehybridization process, paving the way for diverse applications in the biomedical and environmental fields.

Prominent bactericidal characteristics of silver-copper nanocomposites produced via pulse laser ablation

This paper reports the characterization and antibacterial performance evaluation of some spherical and stable crystalline silver (Ag)/copper (Cu) nanocomposites (Ag-CuNCs) prepared in deionized water (DIW) using pulse laser ablation in liquid (PLAL) method. The influence of various laser fluences (LFs) on the structural, morphological, optical and antibacterial properties of these NCs were determined. The UV-Vis absorbance of these NCs at 403 nm and 595 nm was gradually increased accompanied by a blue shift. XRD patterns disclosed the nucleation of highly crystalline Ag-CuNCs with their face centered cubic lattice structure. TEM images showed the existence of spherical NCs with size range of 3-20 nm and lattice fringe spacing of approximately 0.145 nm. EDX profiles of Ag-CuNCs indicated their high purity. The antibacterial effectiveness of the Ag-CuNCs was evaluated by the inhibition zone diameter (IZD) and optical density (OD600) tests against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The proposed NCs revealed the IZD values in the range of 22-26 mm and 20-25 mm when tested against E. coli and S. aureus bacteria, respectively. The Ag-CuNCs prepared at LF of 14.15 J/cm² revealed the best bactericidal activity. It is established that by controlling the laser fluence the bactericidal effectiveness of the Ag-CuNCs can be tuned.

ALD coated polypropylene hernia meshes for prevention of mesh-related post-surgery complications: an experimental study in animals

In this work, thermal atomic layer deposition (ALD) was used to synthesize vanadium (V)-doped TiO₂thin nanofilm on polypropylene (PP) hernia meshes. Multiple layers of (Al₂O₃+ TiVO_x) nano-films were coated on the PP hernia mesh surface to provide a layer with a total thickness of 38 nm to improve its antibacterial properties, thereby, prevent mesh-related post-surgery complications. Highly conformal V-doped TiO₂nanofilm were deposited on PP mesh at a temperature of 85 °C. Rats and rabbits have been used to evaluate the tissue reaction on coated PP hernia meshes and biomechanical testing of the healed tissue. Five rabbits and ten rats have been implanted with ALD coated and uncoated (control) PP meshes into the back of rats and abdominal wall of rabbits. Histology of the mesh-adjacent tissues and electron microscopy of the explanted mesh surface were performed to characterize host tissue response to the implanted PP meshes. The effect of V-doped TiO₂coating on a living organism and fibroblast functions and bacterial activities were studied. The present results indicated that ALD coating improves adhesion properties and exhibited enhanced antibacterial activity compared to uncoated PP mesh. It was shown that V-doped TiO₂coatings were highly effective in inhibitingS. aureusandE. coliadhesion and exhibited excellent antibacterial activity. We found that V-doping of TiO₂, unlike bare TiO₂, allows generated and further procured strong redox reactions which effectively kills bacteria under visible light. We have reported comparative analysis of the use of undoped (bare) TiO₂and V-doped TiO₂as a coating for PP meshes and their action in biological environment and preventing biofilms formation compared with uncoated PP meshes. The PP meshes coated with V-doped TiO₂showed significantly lower shrinkage rates compared with an identical PP mesh without a coating. We have shown that ALD coatings provide non-adhesive and functional (antibacterial) properties.

Multifunctional graphene-based nanocomposites for simultaneous enhanced photocatalytic degradation and photothermal antibacterial activity by visible light

A new strategy for the wastewater treatment was proposed by combining polyvinylpyrrolidone-functionalized silver nanoparticles with reduced graphene oxide (AgNPs-PVP@rGO) as a visible light-triggered photoactive nanocomposite. The nanocomposite with enhanced photocatalytic degradation and photothermal antibacterial activity can simultaneously decrease the content of organic pollutants and bacteria in the wastewater under visible light irradiation. The efficiency of photocatalytic degradation can be significantly improved by the conjugation of AgNPs onto the rGO surface. The water solubility and dispersion of nanocomposite can be increased via PVP functionalization, without stirring during the photocatalytic process. Under the optimal synthesis condition, AgNPs-PVP@rGO has a photocatalytic degradation efficiency of 90.1% for rhodamine B, which is 6.9 and 1.8 times higher than that of polyvinylpyrrolidone-functionalized silver nanoparticles and rGO alone, respectively. More importantly, the degradation efficiency of optimal AgNPs-PVP@rGO sol on rhodamine B is significantly higher than that of its block suspension in the same amount, indicating that the sol with more specific surface area is conducive to the photocatalytic reaction. Meanwhile, the AgNPs-PVP@rGO with excellent photothermal activity can effectively inhibit the bacterial growth. This functional modification of graphene provides a new strategy for simultaneous treatment of multiple pollutants in wastewater. The AgNPs-PVP@rGO nanocomposites for simultaneous enhanced photocatalytic degradation and photothermal antibacterial activity by visible light.

Phase-transfer-assisted synthesis of cysteine-Ag nanoparticles/graphene oxide nanocomposite and its enhanced performance in antibiosis and biosensing

We report a facile, rapid, phase-transfer-assisted process to prepare Ag nanoparticles (AgNP) loaded graphene oxide (GO) nanocomposite, by using cysteine as a highly-effective phase transfer agent for AgNP movement from organic phase to water and subsequently as a covalent linkage for immobilizing AgNP on GO. The obtained c-Ag/GO nanocomposite possesses high nanoparticle loading efficiency, small particle size and monodispersity, strong binding force and good water dispersibility, which endow it with great potential in a variety of bio-applications. To illustrate potentail application, c-Ag/GO and its derivatives c-Ag/rGO were used for antibiosis and biosensing, respectively. The c-Ag/GO composite demonstrates high antibacterial activity against E. coli with a minimal bactericidal concentration of 10 μg ml^-1. The biosensor based on c-Ag/rGO exhibits rapid and sensitive response for uric acid detection with a detection limit of 0.025 μM, a sensitivity of 5.76 μA mM^-1 and a wide linear range of 0.025 ∼ 2250 μM. The comparative analysis with relevant nanocomposites also reveals the precedence of c-Ag/GO in these applications, thus highlighting the advantages of the developed preparation method for c-Ag/GO.

Fractionation of Biomolecules in Withania coagulans Extract for Bioreductive Nanoparticle Synthesis, Antifungal and Biofilm Activity

Withania coagulans contains a complex mixture of various bioactive compounds. In order to reduce the complexity of the plant extract to purify its phytochemical biomolecules, a novel fractionation strategy using different solvent combination ratios was applied to isolate twelve bioactive fractions. These fractions were tested for activity in the biogenic synthesis of cobalt oxide nanoparticles, biofilm and antifungal activities. The results revealed that plant extract with bioactive fractions in 30% ratio for all solvent combinations showed more potent bioreducing power, according to the observed color changes and the appearance of representative absorption peaks at 500-510 nm in the UV-visible spectra which confirm the synthesis of cobalt oxide nanoparticles (Co3O4 NPs). XRD diffraction was used to define the crystal structure, size and phase composition of the products. The fractions obtained using 90% methanol/hexane and 30% methanol/hexane showed more effectiveness against biofilm formation by Pseudomonas aeruginosa and Staphylococcus aureus so these fractions could potentially be used to treat bacterial infections. The 90% hexane/H2O fraction showed excellent antifungal activity against Aspergillus niger and Candida albicans, while the 70% methanol/hexane fraction showed good antifungal activity for C. albicans, so these fractions are potentially useful for the treatment of various fungal infections. On the whole it was concluded that fractionation based on effective combinations of methanol/hexane was useful to investigate and study bioactive compounds, and the active compounds from these fractions may be further purified and tested in various clinical trials.

Antibacterial Properties of Graphene-Based Nanomaterials

Bacteria mediated infections may cause various acute or chronic illnesses and antibiotic resistance in pathogenic bacteria has become a serious health problem around the world due to their excessive use or misuse. Replacement of existing antibacterial agents with a novel and efficient alternative is the immediate demand to alleviate this problem. Graphene-based materials have been exquisitely studied because of their remarkable bactericidal activity on a wide range of bacteria. Graphene-based materials provide advantages of easy preparation, renewable, unique catalytic properties, and exceptional physical properties such as a large specific surface area and mechanical strength. However, several queries related to the mechanism of action, significance of size and composition toward bacterial activity, toxicity criteria, and other issues are needed to be addressed. This review summarizes the recent efforts that have been made so far toward the development of graphene-based antibacterial materials to face current challenges to combat against the bacterial targets. This review describes the inherent antibacterial activity of graphene-family and recent advances that have been made on graphene-based antibacterial materials covering the functionalization with silver nanoparticles, other metal ions/oxides nanoparticles, polymers, antibiotics, and enzymes along with their multicomponent functionalization. Furthermore, the review describes the biosafety of the graphene-based antibacterial materials. It is hoped that this review will provide valuable current insight and excite new ideas for the further development of safe and efficient graphene-based antibacterial materials.

A green and facile synthesis for rGO/Ag nanocomposites using one-step chemical co-reduction route at ambient temperature and combined first principles theoretical analyze

Recently, graphene decorated with various inorganic nanoparticles, such as Pt, Au, Ag, TiO₂ and Fe₃O₄, among which Ag nanocomposites are good candidates for electronics, optics, electrochemistry and catalysis. However, preparation techniques for Ag nanoparticles/carbon matrix hybrids require tedious multi-step processes often involving toxic reducing agents/high temperatures which is not viable for scalable production. Here, a facile, one step and eco-friendly chemical co-reduction route was utilized to synthesis of a new nanocomposites by Ag nanoparticle anchored on reduced graphene oxide (rGO) at ambient temperature and combined first principles theoretical analyze their interfacial adsorption behavior, is reported. In this way, graphene oxide (GO) and Ag⁺ simultaneously reduced by thiourea dioxide (TD) without using any additional reduced reactants. Results indicated that GO was successfully reduced to rGO and well-dispersed Ag nanoparticles with sizes of 6-7 nm, anchored on the surface of rGO sheets. Reduction mechanism was attributed to the synergistic effect of its hydrolysis products in aqueous media. The experiment and theoretical calculation results obtained demonstrate this method to be applicable to the synthesis of other metals on rGO sheets in order to improve wettability and interfacial bonding between rGO and metal and may possibly find various forthcoming medicinal, industrial and technological applications.

Aqueous suspension of biocompatible reduced graphene oxide- Au NPs composite as an effective recyclable catalyst in a Betti reaction

Synthesis of noble metal nanoparticles (NPs) on modified graphene oxide with biocompatible polymers has attracted significant due to their unique properties and various applications. In this research, covalent-modified graphene oxide (MGO) with diacid terminated poly (ethylene glycol) (PEG) was used as a substrate and stabilizing of Au (ш). The reduction of MGO-Au (ш) complex with hydrazine monohydrate under reflux condition obtained biocompatible reduced MGO (rMGO)-Au NPs. Diacid terminated PEG obtained from the reaction of PEG with succinic anhydride in the presence of N,N- dicyclohexylcarbodiimide (DCC) and 4-methylamino pyridine (DMAP) was attached to GO sheets to prevent from the aggregation of rMGO sheets and Au NPs. The resulting aqueous suspension was characterized through UV-vis, FT-IR, Raman, XRD, DLS-zeta potential, SEM, EDX and TEM. Furthermore, nanocomposite showed good catalytic behavior in Betti reaction- synthesis of 1-(α-aminoalkyl)-2-naphthols. The favorable properties of colloidal nanocomposite were attributed to the stable and well distribution Au NPs on rMGO.

Graphene Family Materials in Bone Tissue Regeneration: Perspectives and Challenges

We have witnessed abundant breakthroughs in research on the bio-applications of graphene family materials in current years. Owing to their nanoscale size, large specific surface area, photoluminescence properties, and antibacterial activity, graphene family materials possess huge potential for bone tissue engineering, drug/gene delivery, and biological sensing/imaging applications. In this review, we retrospect recent progress and achievements in graphene research, as well as critically analyze and discuss the bio-safety and feasibility of various biomedical applications of graphene family materials for bone tissue regeneration.

Facile and Robust Solvothermal Synthesis of Nanocrystalline CuInS₂ Thin Films

This work demonstrates that the solvothermal synthesis of nanocrystalline CuInS₂ thin films using the amino acid l-cysteine as sulfur source is facile and robust against variation of reaction time and temperature. Synthesis was carried out in a reaction time range of 3–48 h (at 150 °C) and a reaction temperature range of 100–190 °C (for 18 h). It was found that at least a time of 6 h and a temperature of 140 °C is needed to produce pure nanocrystalline CuInS₂ thin films as proven by X-ray and electron diffraction, high-resolution transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Using UV-vis spectroscopy, a good absorption behavior as well as direct band gaps between 1.46 and 1.55 eV have been determined for all grown films. Only for a reaction time of 3 h and temperatures below 140 °C CuInS₂ is not formed. This is attributed to the formation of metal ion complexes with l-cysteine and the overall slow assembly of CuInS₂. This study reveals that the reaction parameters can be chosen relatively free; the reaction is completely nontoxic and precursors and solvents are rather cheap, which makes this synthesis route interesting for industrial up scaling.