pH-controlled sunitinib anticancer release from magnetic chitosan nanoparticles crosslinked with κ-carrageenan

Sourcing Interchangeability in Commercial Chitosan: Focus on the Physical-Chemical Properties of Six Different Products and Their Impact on the Release of Antibacterial Agents

Sourcing and batch differences are often cited as intrinsic drawbacks for all natural polymers. Chitosan makes no exception. Chitosan is a biocompatible and biodegradable biopolymer with high potential for several biomedical applications, especially for releasing drugs and bactericidal and virucidal agents. Despite the potential of chitosan as a matrix for producing antibacterial films, the variability in its composition, stemming from its natural sources, can hinder the translation from bench to industry. To overcome this concern, we conducted a study to access the interchangeability of chitosan for the development of antibacterial drug release systems, in particular one system crosslinked with tannic acid and iron sulfate. Chitosans from different suppliers were characterized and used to synthetize films containing gentamicin, according to a previously reported protocol. The impact of molecular weight (MW), deacetylation degree and purity on film properties and antibiotic release kinetics was assessed and results were compared. The films exhibited different initial bursts followed by similar sustained release profiles. All films exhibited antibacterial activity against both E. coli and S. aureus for at least 42 days. Moreover, films were cyto- and hemocompatible. Therefore, despite some differences in physicochemical properties, the interchangeability among the studied chitosan suppliers to produce antibacterial films is feasible, and the final product properties and performances are not significantly altered.

Stimuli-responsive carrageenan-based biomaterials for biomedical applications

Carrageenan-based biomaterials have attracted considerable attention in recent years due to their unique biological properties, including their biodegradability, compatibility, and lack of adverse effects. These biomaterials exhibit a variety of beneficial properties, such as antiviral, antitumor, and immunomodulatory effects, which set them apart from other polysaccharides. Stimuli-responsive carrageenan-based biomaterials have attracted particular attention due to their unique properties, such as reducing systemic toxicity and controlling drug release. In this review, a comprehensive investigation of stimuli-responsive carrageenan-based biomaterials was conducted under the influence of various stimuli such as pH, electric field, magnetic field, temperature, light, and ions. These structures exhibited good stimulus-responsive properties and involved corresponding physical and chemical changes, such as changes in swelling ratio and gelling power among others. The biomedical application of carrageenan-based stimuli-responsive biomaterials in the field of tissue engineering, anticancer, antibacterial, and food monitoring has been investigated, showing the great potential of these structures. Although there are promising developments in the design and use of stimuli-responsive carrageenan-based biomaterials, further research is advisable to further investigate their potential applications, particularly in animal models. Extensive studies are needed to investigate the benefits and limitations of these materials to ensure their safety and effective use in biomedical applications.

DNA Origami-Constructed Nanotapes for Sunitinib Adsorption and Inhibition of Renal Clear Carcinoma Cells

Sunitinib (SUN) is a first-line drug for the treatment of renal clear carcinoma cells by targeting receptor tyrosine kinases (RTK) on the cell membrane. However, the effective delivery of SUN to the cell membrane remains a significant challenge. In this study, we fabricated precisely structured DNA nanotapes with strong surface SUN adhesion, enabling RTK inhibition of renal clear carcinoma cells. In our design, the precisely assembled linear topological six-helical-bundle DNA origami serves as the framework, and positively charged chitosan is adsorbed onto the DNA origami surface, thereby forming DNA nanotapes. The SUN was efficiently loaded onto the surface of the DNA nanotapes by electrostatic interaction. We found that DNA nanotapes exhibit excellent stability in serum. Importantly, DNA nanotapes carrying SUN can achieve prolonged cell membrane retention and inhibit RTK, thereby enhancing cytotoxicity toward 786-0 cells. Taken together, this study provides a promising candidate platform for the efficient delivery of cell membrane receptor inhibitors in anticancer therapy.

Eco-friendly anti-corrosion performance of chitosan modified with fused heterocyclic compound on mild steel in acidic medium

This study aims to explore the prevention of chitosan modified with a fused heterocyclic compound as a sustainable corrosion inhibitor for mild steel in 1 M HCl. Electrochemical instruments, including potentiodynamic polarization techniques, and electrochemical impedance spectroscopy (EIS), were employed to evaluate the corrosion protection performance. The outcomes showed that the chitosan modified with a fused heterocyclic compound has outstanding inhibition performance, with an inhibition effectiveness of 98.25 % at 100 ppm. The anti-corrosion features of modified chitosan were ascribed to the presence of hetero atoms in modified chitosan composite which leads to the creation of a protective layer, The modified chitosan composite behaved as mixed-typed inhibitors, as shown by the PDP results. The modified chitosan composite adsorbs on mild steel in the investigated corrosive media via chemisorption interactions, and its adsorption followed the Langmuir adsorption model. Furthermore, increasing the temperature from 303 to 333 K enhanced the corrosion rate, most likely due to the desorption of the inhibitor agent from the steel surface.

Innovative microwave-assisted biosynthesis of copper oxide nanoparticles loaded with platinum(ii) based complex for halting colon cancer: cellular, molecular, and computational investigations

In the current study, we biosynthesized copper oxide NPs (CuO NPs) utilizing the essential oils extracted from Boswellia carterii oleogum resin, which served as a bioreductant and capping agent with the help of microwave energy. Afterwards, the platinum(ii) based anticancer drug, carboplatin (Cr), was loaded onto the CuO NPs, exploiting the electrostatic interactions forming Cr@CuO NPs. The produced biogenic NPs were then characterized using zeta potential (ZP), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction spectroscopy (XRD), and Fourier transform infrared spectroscopy (FTIR) techniques. In addition, the entrapment efficiency and release profile of the loaded Cr were evaluated. Thereafter, SRB assay was performed, where Cr@CuO NPs demonstrated the highest cytotoxic activity against human colon cancer cells (HCT-116) with an IC50 of 5.17 μg mL-1, which was about 1.6 and 2.2 folds more than that of Cr and CuO NPs. Moreover, the greenly synthesized nanoparticles (Cr@CuO NPs) displayed a satisfactory selectivity index (SI = 6.82), which was far better than the free Cr treatment (SI = 2.23). Regarding the apoptosis assay, the advent of Cr@CuO NPs resulted in an immense increase in the cellular population percentage of HCT-116 cells undergoing both early (16.02%) and late apoptosis (35.66%), significantly surpassing free Cr and CuO NPs. A study of HCT-116 cell cycle kinetics revealed the powerful ability of Cr@CuO NPs to trap cells in the Sub-G1 and G2 phases and impede the G2/M transition. RT-qPCR was utilized for molecular investigations of the pro-apoptotic (Bax and p53) and antiapoptotic genes (Bcl-2). The novel Cr@CuO NPs treatment rose above single Cr or CuO NPs therapy in stimulating the p53-Bax mediated mitochondrial apoptosis. The cellular and molecular biology investigations presented substantial proof of the potentiated anticancer activity of Cr@CuO NPs and the extra benefits that could be obtained from their use.

The Advancement and Obstacles in Improving the Stability of Nanocarriers for Precision Drug Delivery in the Field of Nanomedicine

Nanocarriers have emerged as a promising class of nanoscale materials in the fields of drug delivery and biomedical applications. Their unique properties, such as high surface area- tovolume ratios and enhanced permeability and retention effects, enable targeted delivery of therapeutic agents to specific tissues or cells. However, the inherent instability of nanocarriers poses significant challenges to their successful application. This review highlights the importance of nanocarrier stability in biomedical applications and its impact on biocompatibility, targeted drug delivery, long shelf life, drug delivery performance, therapeutic efficacy, reduced side effects, prolonged circulation time, and targeted delivery. Enhancing nanocarrier stability requires careful design, engineering, and optimization of physical and chemical parameters. Various strategies and cutting-edge techniques employed to improve nanocarrier stability are explored, with a focus on their applications in drug delivery. By understanding the advances and challenges in nanocarrier stability, this review aims to contribute to the development and implementation of nanocarrier- based therapies in clinical settings, advancing the field of nanomedicine.

Nanotechnology-driven improvisation of red algae-derived carrageenan for industrial and bio-medical applications

Algae biomass has been recognized as feedstock with diverse application including production of biofuel, biofertilizer, animal feed, wastewater treatment and bioremediation. In addition, algae species are a potential reservoir of metabolites and polymers with potential to be utilized for biomedicine, healthcare and industrial purposes. Carrageenan is one such medicinally and industrially significant polysaccharide which is extracted from red algae species (Kappaphycus alvarezii and Eucheuma denticulatum, among the common species). The extraction process of carrageenan is affected by different environmental factors and the source of biomass, which can vary and significantly impact the yield. Diverse applications of carrageenan include hydrogel beads, bio-composites, pharmacological properties, application in cosmetics, food and related industries. Carrageenan biological activities including antioxidant, anti-inflammatory, antimicrobial, and antitumor activities are significantly influenced by sulfation pattern, yield percentage and molecular weight. In addition to natural biomedical potential of carrageenan, synergetic effect of carrageenan- nanocomposites exhibit potential for further improvisation of biomedical applications. Nanotechnology driven bio-composites of carrageenan remarkably improve the quality of films, food packaging, and drug delivery systems. Such nano bio-composites exhibit enhanced stability, biodegradability, and biocompatibility, making them suitable alternatives for drug delivery, wound-healing, and tissue engineering applications. The present work is a comprehensive study to analyze biomedical and other applications of Carrageenan along with underlying mechanism or mode of action along with synergetic application of nanotechnology.

Synthetic strategy towards novel composite based on substituted pyrido[2,1-b][1,3,4]oxadiazine-dialdehyde chitosan conjugate with antimicrobial and anticancer activities

Synthesis of new compounds that have biological activity is an indispensible issue in order to deal with the drug resistant bacteria. This wok reports preparation of a novel composite based on substituted pyrido[2,1-b][1,3,4] oxadiazine-dialdehyde chitosan (PODACs) conjugate. Firstly, a novel approach of synthesizing of a new substituted pyrido[2,1-b][1,3,4]oxadiazine-7-carboxylic acid (PO) is reported through reacting(Z)-N'-(1-(3-aminophenyl)ethylidene)-2-cyanoacetohydrazide with (Z)-ethyl 2-cyano-3-(pyridin-3-yl)acrylate. Then Dialdehyde chitosan (DACs) has prepared via periodat oxidation of chitosan (Cs). The synthesized compounds have studied via various spectroscopic instruments to validate their chemical structure such as nuclear magnetic resonance 1 H NMR, ¹³ C NMR, fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). The substituted pyrido [2,1-b][1,3,4]oxadiazine and the composite were evaluated for antimicrobial activity against pathogenic bacteria and unicellular fungi. The results revealed that, the composite exhibited promising antimicrobial activity against E. coli, S. aureus, B. subtilis and C. albicans where inhibition zones were 19, 18, 36 and 20 mm respectively. Furthermore, the substituted pyrido [2,1-b][1,3,4]oxadiazine and the composite were evaluated for cytotoxic activity against MCF-7 human breast cancer cell line as well as vero normal cell line. Results illustrated the prepared composite has anticancer activity against MCF7 where IC₅₀ was 238 µg/ml.

Indole Antitumor Agents in Nanotechnology Formulations: An Overview

The indole heterocycle represents one of the most important scaffolds in medicinal chemistry and is shared among a number of drugs clinically used in different therapeutic areas. Due to its varied biological activities, high unique chemical properties and significant pharmacological behaviors, indole derivatives have drawn considerable interest in the last decade as antitumor agents active against different types of cancers. The research of novel antiproliferative drugs endowed with enhanced efficacy and reduced toxicity led to the approval by U.S. Food and Drug Administration of the indole-based anticancer agents Sunitinib, Nintedanib, Osimertinib, Panobinostat, Alectinib and Anlotinib. Additionally, new drug delivery systems have been developed to protect the active principle from degradation and to direct the drug to the specific site for clinical use, thus reducing its toxicity. In the present work is an updated review of the recently approved indole-based anti-cancer agents and the nanotechnology systems developed for their delivery.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

pH-sensitive biocompatible chitosan/sepiolite-based cross-linked citric acid magnetic nanocarrier for efficient sunitinib release

In this study, the magnetite nanoparticles were immobilized on the sepiolite needles via co-precipitation of iron ions. Then, the resulted magnetic sepiolite (mSep) nanoparticles were coated with chitosan biopolymer (Chito) in the presence of citric acid (CA) to prepare mSep@Chito core-shell drug nanocarriers (NCs). TEM images showed magnetic Fe₃O₄ nanoparticles with small sizes (less than 25 nm) on the sepiolite needles. Sunitinib anticancer drug loading efficiencies were ⁓45 and 83.7 % for the NCs with low and high content of Chito, respectively. The in-vitro drug release results exhibited that the mSep@Chito NCs have a sustained release behavior with high pH-dependent properties. Cytotoxic results (MTT assay) showed that the sunitinib-loaded mSep@Chito2 NC had a significant cytotoxic effect on the MCF-7 cell lines. Also, the in-vitro compatibility of erythrocytes, physiological stability, biodegradability, and antibacterial and antioxidant activities of NCs was evaluated. The results showed that the synthesized NCs had excellent hemocompatibility, good antioxidant properties, and were sufficiently stable and biocompatible. Based on the antibacterial data, the minimal inhibitory concentration (MIC) values for mSep@Chito1, mSep@Chito2, and mSep@Chito3 were obtained as 125, 62.5, and 31.2 μg/mL towards S. aureus, respectively. All in all, the prepared NCs could be potentially used as a pH-triggered system for biomedical applications.

Fabrication of mesoporous silica nanoparticles for targeted delivery of sunitinib to ovarian cancer cells

INTRODUCTION

Mesoporous silica nanoparticles (MSNPs) are considered innovative multifunctional structures for targeted drug delivery owing to their outstanding physicochemical characteristics.

METHODS

MSNPs were fabricated using the sol-gel method, and polyethylene glycol-600 (PEG600) was used for MSNPs modification. Subsequently, sunitinib (SUN) was loaded into the MSNPs, MSNP-PEG and MSNP-PEG/SUN were grafted with mucin 16 (MUC16) aptamers. The nanosystems (NSs) were characterized using FT-IR, TEM, SEM, DLS, XRD, BJH, and BET. Furthermore, the biological impacts of MSNPs were evaluated on the ovarian cancer cells by MTT assay and flow cytometry analysis.

RESULTS

The results revealed that the MSNPs have a spherical shape with an average dimension, pore size, and surface area of 56.10 nm, 2.488 nm, and 148.08 m2g-1, respectively. The cell viability results showed higher toxicity of targeted MSNPs in MUC16 overexpressing OVCAR-3 cells as compared to the SK-OV-3 cells; that was further confirmed by the cellular uptake results. The cell cycle analysis exhibited that the induction of sub-G1 phase arrest mostly occurred in MSNP-PEG/SUN-MUC16 treated OVCAR-3 cells and MSNP-PEG/SUN treated SK-OV-3 cells. DAPI staining showed apoptosis induction upon exposure to targeted MSNP in MUC16 positive OVCAR-3 cells.

CONCLUSION

According to our results, the engineered NSs could be considered an effective multifunctional targeted drug delivery platform for the mucin 16 overexpressing cells.

Targeted Delivery of Sunitinib by MUC-1 Aptamer-Capped Magnetic Mesoporous Silica Nanoparticles

Magnetic mesoporous silica nanoparticles (MMSNPs) are being widely investigated as multifunctional novel drug delivery systems (DDSs) and play an important role in targeted therapy. Here, magnetic cores were synthesized using the thermal decomposition method. Further, to improve the biocompatibility and pharmacokinetic behavior, mesoporous silica was synthesized using the sol-gel process to coat the magnetic cores. Subsequently, sunitinib (SUN) was loaded into the MMSNPs, and the particles were armed with amine-modified mucin 1 (MUC-1) aptamers. The MMSNPs were characterized using FT-IR, TEM, SEM, electrophoresis gel, DLS, and EDX. MTT assay, flow cytometry analysis, ROS assessment, and mitochondrial membrane potential analysis evaluated the nanoparticles' biological impacts. The physicochemical analysis revealed that the engineered MMSNPs have a smooth surface and spherical shape with an average size of 97.6 nm. The biological in vitro analysis confirmed the highest impacts of the targeted MMSNPs in MUC-1 overexpressing cells (OVCAR-3) compared to the MUC-1 negative MDA-MB-231 cells. In conclusion, the synthesized MMSNP-SUN-MUC-1 nanosystem serves as a unique multifunctional targeted delivery system to combat the MUC-1 overexpressing ovarian cancer cells.

Physicochemical, Thermal, and Morphological Properties of Chitosan Nanoparticles Produced by Ionic Gelation

Chitosan nanoparticles (CSNPs) can be widely used in the food, pharmaceutical, and cosmetic sectors due to their high performance, unique properties, and high surface area. In this research, CSNPs were produced by the ionic gelation method and using sodium tripolyphosphate (STPP) as an appropriate technique compared to the conventional methods. To evaluate the effects of various factors on the size, zeta potential (ZP), and optimal synthesis conditions, different concentrations of CS (1, 3, and 5 mg/mL), STPP (0.5, 0.75, and 1 mg/mL), and CS to STPP ratio (1:1, 3:1, and 5:1) were applied and optimized using the response surface methodology. The size of CSNPs was increased by using higher concentrations of CS, STPP, and CS/STPP ratios. The value of ZP was determined positive and it increased with increasing CS concentrations and CS/STPP ratios. ATR-FTIR spectra revealed interactions between CS and STPP. The DSC thermogram of CSNPs showed a double sharp endothermic peak at about 74.5 °C (ΔH = 122.00 J/g); further, the TGA thermograms indicated the total weight loss of STPP, CS, and CSNPs as nearly 3.30%, 63.60%, and 52.00%, respectively. The XRD data also revealed a greater chain alignment in the CSNPs. Optimized, the CSNPs can be used as promising carriers for bioactive compounds where they also act as efficient stabilizers in Pickering emulsions.

Drug delivery systems for cancer treatment: a review of marine-derived polysaccharides

Abstract:

Cancer is a disease characterized by uncontrolled cell proliferation and the spread of cells to other tissues and remains one of the worldwide problems waiting to be solved. There are various treatment strategies for cancer, such as chemotherapy, surgery, radiotherapy, and immunotherapy, although it varies according to its type and stage. Many chemotherapeutic agents have limited clinical use due to lack of efficacy, off-target toxicity, metabolic instability, or poor pharmacokinetics. One possible solution to this high rate of clinical failure is to design drug delivery systems that deliver drugs in a controlled and specific manner and are not toxic to normal cells. Marine systems contain biodiversity, including components and materials that can be used in biomedical applications and therapy. Biomaterials such as chitin, chitosan, alginate, carrageenan, fucoidan, hyaluronan, agarose, and ulvan obtained from marine organisms have found use in DDSs today. These polysaccharides are biocompatible, non-toxic, biodegradable, and cost-effective, making them ideal raw materials for increasingly complex DDSs with a potentially regulated release. In this review, the contributions of polysaccharides from the marine environment to the development of anticancer drugs in DDSs will be discussed.

Preparation and characterization of carrageenan-embedded lanthanum iron oxide nanocomposite for efficient removal of arsenite ions from water

Arsenic (As) contamination in drinking water has grown into a global concern in recent years, which demands the development of various As remediation approaches. In this study, a new magnetic nanocomposite, carrageenan-embedded LaFeO₃ nanoparticles (abbreviated as CA-LaFeNPs) was synthesized by a sol-gel process and used to remove arsenite [As(III)] from water. The synthesized magnetic adsorbent was characterized by powder XRD, SEM, FTIR, VSM, and TGA. The adsorbent gel, CA-LaFeNP was mainly with LaFeO₃ in nanoscale particles with a saturation magnetization of 13.33 emu g^-1 and could be easily separated from water with a simple hand-held magnet in 2 minutes. The adsorption outcomes of the CA-LaFeNPs could be finely interpreted by Langmuir, Freundlich, and Tempkin isotherm models. The Langmuir isotherm model appears to have good regression coefficients, and maximum adsorption capacity was estimated to be 91 mg g^-1 for CA-LaFeNPs at 27 °C and pH 7. The removal efficiency observed for CA-FeNPs was 91% up to the As(III) concentration of 700 mg L^-1, while it decreased to 85% when the As(III) concentration was above 1200 mg L^-1. This low-cost and environmentally-friendly magnetic nanocomposite, CA-LaFeNPs could be more appropriate for real-world applications and also a substitute for the traditional magnetic nanoparticles.

Synthesis and Characterization of Novel Copper(II)-Sunitinib Complex: Molecular Docking, DFT Studies, Hirshfeld Analysis and Cytotoxicity Studies

The main goal of this work was to report the synthesis, characterization, and cytotoxicity study of a novel copper(II)-sunitinib complex, CuSun. It has been synthesized and characterized in solid state and in solution by different methods (such as DFT, FTIR, Raman, UV-vis, EPR, NMR, etc.). The solid-state molecular structure of trichlorosunitinibcopper(II), where sunitinib: N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-2-oxo-1H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide, for short Cu(Sun)Cl3, was determined by X-ray diffraction. It crystallizes in the triclinic space group P-1 with a = 7.9061(5) Å, b = 12.412(1) Å, c = 13.7005(8) Å, α = 105.021(6)°, β = 106.744(5)°, γ = 91.749(5)°, and Z = 2 molecules per unit cell. Also, we have found π-π interactions and classic and non-classic H-bonds in the crystal structure by using Hirshfeld surface analysis. In the speciation studies, the complex has dissociated in protonated sunitinib and chlorocomplex of copper(II), according to 1HNMR, EPR, UV-vis and conductimetric analysis. Molecular docking of the complex in both, ATP binding site and allosteric site of VEGFR2 have shown no improvement in comparison to the free ligand. Besides, cytotoxicity assay on HepG2 cell line shows similar activity for complex and ligand in the range between 1–25 μM supporting the data obtained from studies in solution.

Antimicrobial and antiviral activities with molecular docking study of chitosan/carrageenan@clove oil beads

BACKGROUND

Biopolymers are promising candidates that can be fabricated into hydrophilic matrices and used for many applications due to their distinctive properties such as non-toxic, biodegradable, biocompatibility, and low cost. A promising composite of chitosan and carrageenan with self-crosslinking has been prepared.

METHODS AND RESULTS

In this study, a rigorous approach for an inexpensive and non-toxic combination of different amounts of clove oil with two polyelectrolytes including chitosan and carrageenan in the form of beads have been prepared. The structure and the surface morphology of the beads were investigated using FTIR, XRD, and SEM. Moreover, antimicrobial, antiviral activity, and molecular docking were evaluated. Antibacterial results revealed that chitosan/carrageenan@clove oil beads have antimicrobial activity as well as chitosan/carrageenan without clove oil against Escherichia colia ATCC25922, Pseudomonas aeruginosa aATCC27853, Staphylococcus aureus ATCC25923, Bacillus subtilisaATCC6051 and Candida albicanssATCC90028. Furthermore, maximum non-toxic concentration (MNTC) of chitosan/carrageenan@clove oil beads was (31.25 μg/mL) which exhibited promising antiviral activity against Herpes simplex virus-1 (HSV-1), and was significantly higher than chitosan/carrageenan without clove oil, where antiviral activity was 82.94 and 57.64% respectively. Eventually, docking study and computational calculation have been used to show the reactivity of the molecules.

CONCLUSIONS

The developed chitosan/carrageenan@clove oil beads have shown promising properties to be used as carriers of drug delivery, tissue engineering, and regenerative medicine. This article is protected by copyright. All rights reserved.

Tyrosine kinase inhibitors as next generation oncological therapeutics: Current strategies, limitations and future perspectives

Protein kinases, a class of enzymes that govern various biological phenomena at a cellular level, are responsible for signal transduction in cells that regulate cellular proliferation, differentiation, and growth. Protein kinase enzyme mutation results in abnormal cell division leading to a pathological condition like cancer. Tyrosine kinase (TK) inhibitors, which helps as a potential drug candidate for the treatment of cancer, are continuously being developed. Majority of these drug candidates are being administered as conventional oral dosage form, which provides limited safety and efficacy due to non-specific delivery and uncontrolled biodistribution resulting into the adverse effects. A controlled drug delivery approach for the delivery of TK inhibitors may be a potential strategy with significant safety and efficacy profile. Novel drug delivery strategies provide target-specific drug delivery, improved pharmacokinetic behaviour, and sustained release leading to lower doses and dosing frequency with significantly reduced side effects. Along with basic aspects of tyrosine kinase, this review discusses various aspects related to the application of tyrosine kinase inhibitors in clinical oncological setting. Furthermore, the limitations/challenges and formulation advancements related to this class of candidates particularly for cancer management have been reviewed. It is expected that innovations in drug delivery approaches for TK inhibitors using novel techniques will surely provide a new insights for improved cancer treatment and patients' life quality.

Hydroxyapatite grafted chitosan/laponite RD hydrogel: Evaluation of the encapsulation capacity, pH-responsivity, and controlled release behavior

In this study, a pH-responsive drug carrier was developed for the controllable release of drugs in the gastric environment. Chitosan (CS), a pH-sensitive biopolymer, and laponite RD (LAP), a nano-clay with a high drug-loading capability, were used to design the new carrier. Hydroxyapatite (HA) was grafted into CS/LAP matrix through a simple co-precipitation technique to overcome the burst release of the CS/LAP. The structural analysis and swelling tests of products demonstrated that the co-precipitation method has led to the penetration of HA nanoparticles inside the CS/LAP matrix and occupying its hollow pores. Occupation of the empty pores can lead to the entrapment of drug molecules, thereby reducing the release rate. The nanocomposite showed a high loading capacity to ofloxacin as a drug model. The effects of HA content on release behavior of nanocomposite were investigated at simulated gastric (pH 1.2) and intestine (pH 7.4) environments. The results indicated a high pH sensitivity for CS/LAP/HA. HA grafting reduced the release rate remarkably regardless of pH. The release rate of CS/LAP/HA decreased by 44-63% in pH 1.2 and 41-51% in pH 7.4 compared to CS/LAP. Kinetic studies indicated that grafting the HA in CS/LAP has changed the drug release mechanism.

Development of a Polysaccharide-Based Hydrogel Drug Delivery System (DDS): An Update

Delivering a drug to the target site with minimal-to-no off-target cytotoxicity is the major determinant for the success of disease therapy. While the therapeutic efficacy and cytotoxicity of the drug play the main roles, the use of a suitable drug delivery system (DDS) is important to protect the drug along the administration route and release it at the desired target site. Polysaccharides have been extensively studied as a biomaterial for DDS development due to their high biocompatibility. More usefully, polysaccharides can be crosslinked with various molecules such as micro/nanoparticles and hydrogels to form a modified DDS. According to IUPAC, hydrogel is defined as the structure and processing of sols, gels, networks and inorganic–organic hybrids. This 3D network which often consists of a hydrophilic polymer can drastically improve the physical and chemical properties of DDS to increase the biodegradability and bioavailability of the carrier drugs. The advancement of nanotechnology also allows the construction of hydrogel DDS with enhanced functionalities such as stimuli-responsiveness, target specificity, sustained drug release, and therapeutic efficacy. This review provides a current update on the use of hydrogel DDS derived from polysaccharide-based materials in delivering various therapeutic molecules and drugs. We also highlighted the factors that affect the efficacy of these DDS and the current challenges of developing them for clinical use.

Development of modified polymer dot as stimuli-sensitive and 67Ga radio-carrier, for investigation of in vitro drug delivery, in vivo imaging and drug release kinetic

A polymer dot modified histidine-functionalized graphene quantum dot carrier, PD@His.GQD, was synthesized to investigate the in vitro sunitinib (STB) deliveryvia luminescence spectrometer. The carrier's synthesis, with an average size of 34 nm, was proved by Fourier transform infrared (FTIR), Transmission Electron Microscopy (TEM), and Dynamic Light Scattering (DLS) analyses. In the in vitro, STB delivery investigation showed that for healthy tissue, the STB was loaded at pH  = 7.2 and at 25  = 5.4 at 37 °C with a maximum loading efficiency percentage of 99 % while it was released at pH = 5.4 at 37 °C with a release percentage of 97 %. In the sequel, the STB loaded carrier was labeled with Gallium-67 (⁶⁷Ga-STB.PD@His.GQD) to produce exceedingly transparent radio-carrier for in vivo kidney cancerous mice imaging via the single photon emission computed tomography (SPECT) device. The radiochemical purity of the ⁶⁷Ga-STB.PD@His.GQD was obtained as 95 % by Radio Thin Layer Chromatography (RTLC) and High-Performance Liquid Chromatography (HPLC) analysis. All obtained results affirmed that the synthesized PD@His.GQD is an STB stimuli-sensitive and selective targeting carrier. All cancerous mice in vivo images at 10 and 20 h of ⁶⁷Ga-STB.PD@His.GQD post-injection and its bio-distribution calculations showed its most accumulation in the kidney cancerous tissue. Also, the STB release kinetic was studied via Zero-order, First-order, Higuchi, and Korsmeyer-Peppas models, and the release data were fitted with Korsmeyer-Peppas model that expresses the STB release mechanism is controlled by diffusion.

Magnetic κ-carrageenan/chitosan/montmorillonite nanocomposite hydrogels with controlled sunitinib release

This work aimed to design montmorillonite-incorporated pH-responsive and magnetic κ-carrageenan/chitosan hydrogels via a completely green route for controlled release of sunitinib anticancer drug. This was accomplished by ionic cross-linking of two biopolymers, κ-carrageenan and chitosan, in the presence of magnetic montmorillonite (mMMt) nanoplatelets. Interestingly, it was observed that the amount of mMMt affected not only the microstructure of hydrogels, but also the drug loading efficiency of nanocomposite hydrogels was noticeably increased by introducing mMMt (from 69 to 96%). The in vitro sunitinib release experiments showed that a low content of loaded sunitinib was released from all hydrogels in the buffered solution with pH 7.4. In contrast, a relatively sustained release with a high content of drug release was observed in the acidic solution of pH 5.5. During 48 h, the hydrogels nanocomposite containing a high content of mMMt showed cumulative release of 64.0 and 8.6% at pH 5.5 and 7.4, respectively. During two days, while the cumulative release of sunitinib was obtained 84.3% for the magnetic-free hydrogel, the magnetic ones showed 74.4 and 64% with the low and high contents of magnetic MMt, respectively. The developed κ-carrageenan/chitosan hydrogels with a high capacity of drug loading and subsequent pH-sensitive drug release can be considered in prolonged cancer therapy with reduced side effects.

Nanotechnology Based Approach for Hepatocellular Carcinoma Targeting

Hepatocellular carcinoma (HCC) is the primary liver cancer that has shown a high incidence and mortality rate worldwide among several types of cancers. A large variety of chemotherapeutic agents employed for the treatment have a limited success rate owing to their limited site-specific drug targeting ability. Thus, there is a demand to develop novel approaches for the treatment of HCC. With advancements in nanotechnology-based drug delivery approaches, the challenges of conventional chemotherapy have been continuously decreasing. Nanomedicines constituted of lipidic and polymeric composites provide a better platform for delivering and opening new pathways for HCC treatment. A score of nanocarriers such as surface-engineered liposomes, nanoparticles, nanotubes, micelles, quantum dots, etc., has been investigated in the treatment of HCC. These nanocarriers are considered to be highly effective clinically for delivering chemotherapeutic drugs with high site-specificity ability and therapeutic efficiency. The present review highlights the current focus on the application of nanocarrier systems using various ligand-based receptor-specific targeting strategies for the treatment and management of HCC. Moreover, the article has also included information on the current clinically approved drug therapy for hepatocellular carcinoma treatment and updates of regulatory requirements for approval of such nanomedicines.

Highly efficient sunitinib release from pH-responsive mHPMC@Chitosan core-shell nanoparticles

This study reports developing novel smart drug delivery systems (DDS) that have great importance in anticancer therapeutics. The magnetic hydroxypropyl methylcellulose (mHPMC) synthesized via in situ method and introduced in the fabrication of tripolyphosphate (TPP)-cross-linked chitosan core-shell nano-carriers (mHPMC@Chitosan). The TPP-cross-linked mHPMC@Chitosan nano-carriers then characterized using TEM, SEM/EDS, DLS, XPS, FTIR, TGA, XRD, and VSM. The encapsulation efficiency showed high capacity of loading for sunitinib malate (above 86 % for all samples). At pH 7.4, the minimum content of drug release was observed for all samples fabricated with variable contents of chitosan. At pH 4.5, the effect of chitosan content revealed that the rate of sunitinib release tends to decrease as its content increased. During two days, 44 and 93 % of the loaded sunitinib released from carriers containing high and low contents of chitosan, respectively. Besides, this mHPMC@Chitosan core shell nano-carrier shown pH-sensitive drug release.

Effect of linear charge density of polysaccharides on interactions with α-amylase: Self-Assembling behavior and application in enzyme immobilization

The co-existence of polysaccharides and enzymes in the food matrix could form complexes that directly influence the catalytic efficacy of enzymes. This work investigated the self-assembly behaviors of α-amylase and charged polysaccharides and fabricated the α-amylase/polysaccharides complex coacervates. The results showed that the linear charge density of polysaccharides had a critical impact on the complex formation, structure, and enzyme protection under acidic conditions. At low pH, α-amylase formed compact and tight coacervates with the λ-carrageenan. However, α-amylase/pectin coacervates dissociated when the pH was lower than 3.0. The optimized binding ratio of α-amylase/λ-carrageenan was 12:1, and α-amylase/pectin was 4:1. Finally, the α-amylase/λ-carrageenan complex coacervates effectively immobilized the enzyme and almost 70% of enzyme activity remained in coacervates after exposure to pH3.0 for 1 h. This study demonstrates that the change in the linear charge density of polysaccharides could regulate the enzyme-catalyzed process in food processing by a simple and fine-controlled method.

Carrageenan: Drug Delivery Systems and Other Biomedical Applications

Marine resources are today a renewable source of various compounds, such as polysaccharides, that are used in the pharmaceutical, medical, cosmetic, and food fields. In recent years, considerable attention has been focused on carrageenan-based biomaterials due to their multifunctional qualities, including biodegradability, biocompatibility, and non-toxicity, in addition to bioactive attributes, such as their antiviral, antibacterial, antihyperlipidemic, anticoagulant, antioxidant, antitumor, and immunomodulating properties. They have been applied in pharmaceutical formulations as both their bioactive and physicochemical properties make them suitable biomaterials for drug delivery, and recently for the development of tissue engineering. This article provides a review of recent research on the various types of carrageenan-based biomedical and pharmaceutical applications.

The Oral Administration of Lidocaine HCl Biodegradable Microspheres: Formulation and Optimization

Purpose

Lidocaine (LID) is a local anesthetic that is administered either by injection and/or a topical/transdermal route. However, there is a current need to develop efficacious methods for the oral delivery of LID with optimized bioavailability.

Methods

We developed oral LID biodegradable microspheres that were loaded with alginate-chitosan with different mass ratios, and characterized these microspheres in vitro. We also developed, and utilized, a simple and sensitive HPLC-tandem mass spectrometry (LC-MS-MS) method for assaying LID microspheres.

Results

The mean particle size (MPS) of the LID microspheres ranged from 340.7 to 528.3 nm. As the concentration of alginate was reduced, there was a significant reduction in MPS. However, there was no significant change in drug entrapment efficiency (DEE), or drug yield, when the alginate concentration was either increased or decreased. DSC measurements demonstrated the successful loading of LID to the new formulations. After a slow initial release, less than 10% of the LID was released in vitro within 4 h at pH 1.2. In order to evaluate nephrotoxicity, we carried out MTT assays of LID in two types of cell line (LLC-PK1 and MDCK). LID significantly suppressed the cell toxicity of both cell lines at the concentrations tested (100, 200, and 400ng/µL).

Conclusion

Experiments involving the oral delivery of LID formulations showed a significant reduction in particle size and an improvement in dissolution rate. The formulations of LID developed exhibit significantly less toxicity than LID alone.

In Vitro Drug Release and Biocatalysis from pH-Responsive Gold Nanoparticles Synthesized Using Doxycycline

pH-sensitive doxycycline gold nanoparticles (doxy-AuNPs) are reported here to act as effective drug nanocarriers and as biocatalysts. The AuNPs were synthesized with doxy as the reducing and capping agent. Various parameters were optimized to find the best conditions for the synthesis of doxy-AuNPs, and these were characterized with UV-vis, X-ray diffraction (XRD), FTIR, and transmission electron microscopy (TEM). Doxy-AuNPs were then loaded with the anticancer drug doxorubicin (DOX), where 70% of the initially available drug was loaded within 24 h. Furthermore, pH-dependent drug release was measured at 60% with in vitro measurements in phosphate-buffered saline (PBS). In addition, the doxy-AuNPs were applied as a biocatalyst. Oxidation of dopamine was taken as a model reaction to determine the catalytic activity of doxy-AuNPs. Almost complete oxidation of dopamine occurred in 5 min, which indicates the fast response of synthesized doxy-AuNPs as a biocatalyst. Hence, doxy-AuNPs are a versatile platform for drug loading and biocatalyst.

The Enhanced and Tunable Sustained Release of Pesticides Using Activated Carbon as a Carrier

The sustained release of pesticides improves drug utilization efficiency and reduces their adverse effects. Activated carbon (AC) is an excellent adsorbent and promising soil conditioner. It has a rich, porous structure and thus can store and gradually release drugs. In this study, three AC materials with surface areas ranging from 800–2000 m²/g were used and two types of modified activated carbons were prepared, and their capacity as drug carriers was evaluated by using 2,4-Dichlorophenoxyacetic acid sodium (2,4-D sodium) as the model pesticide. The preparations were characterized by scanning electron microscopy, nitrogen physical analysis, and zeta potential. The five preparations showed an enhanced and tunable sustained release of drugs. AC1, with the highest specific surface area, possesses the best drug-loading capacity, reaching 679.18 mg/g, but the lowest drug release rate of 32.31% in 96 h. PDA-AC3 has the lowest specific surface area, showing limited drug-loading ability, 82.94 mg/g, but 100% drug release within 72 h. This study suggests that activated carbon has potent applications in agricultural pest control as an inexpensive, effective, controllable, and safe pesticide carrier.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.