New design of highly sensitive AIE based fluorescent imidazole derivatives: Probing of sweat pores and anti-counterfeiting applications

Triplet states nurture the long-lived emission at room temperature of a chlorine-containing tetraphenylimidazole derivative when aggregation occurs in water/acetonitrile mixtures

In recent years, there have been numerous reports on the synthesis and applications of 1,2,4,5-tetraphenylimidazole (TEPI) derivatives, particularly due to the photophysical properties of such systems. However, the long-lived emission behavior of TEPIs has not been studied, with research largely limited to attempts at 77 K. In this study, the compound 1-(4-chlorophenyl)-2,4,5-triphenyl-1H-imidazole (TEPI-Cl) was prepared and characterized using experimental techniques (i.e., absorption spectra, steady-state, and long-lived emission), as well as computationally, using a combination of Extended Tight Binding (xTB), Density Functional Theory (DFT), and Time-Dependent (TD-DFT) methods. TEPI-Cl exhibited a low solvatochromic effect, both in absorption and steady-state emission in organic solvents, which is typical of a locally excited transition; this was confirmed by the performed calculations. However, in its aggregated state (observed in water/acetonitrile mixtures with >80% of water, in volume), the compound displayed the emergence of a new band in the absorption spectrum, as well as aggregate-induced enhanced emission in the steady-state emission analysis. The long-lived emission spectrum of TEPI-Cl recorded at room temperature shows two signals (at 380 and 540 nm) and the presence of benzil enables the generation of triplet excited states of the latter, likely through an energy transfer process. The sensitivity of these signals to the presence of oxygen suggested that the related excited states are of a triplet nature; moreover, the calculated electronic transitions for the optimized structures of the T1 and T2 states are comparable to the experimentally observed long-lived emission wavelengths. This newly observed behavior of TEPI-Cl comes as a novel photophysical property added to this class of molecules, demonstrating its significant potential for further applications in complex matrices.

Aggregation-induced emission luminogens for latent fingerprint detection

For over a century, fingerprints have served as a pivotal tool for identification of individuals owing to their enduring characteristics and easily apparent features, particularly in the realm of criminal investigations. Latent fingerprints (LFPs) are "invisible fingerprints" that are most commonly available at crime scenes and require a rapid, selective, sensitive, and convenient method for detection. However, existing fingerprint development techniques harbour limitations, prompting the exploration of novel approaches that prioritize investigator safety and environmental sustainability. Leveraging the unique photophysical properties of aggregation-induced emission luminogens (AIEgens) has emerged as a promising strategy for on-site analysis of LFP visualization. In this highlight, we have presented a comparative analysis of various AIEgens (organic compounds, metal complexes, nanoparticles, and polymers) for the development and detection of LFPs. Through this examination, insights into the efficiency and potential applications of AIE-based fingerprint development techniques are provided. In addition, several strategies have been proposed for circumventing the limitations of existing AIEgens. We hope that this highlight article will encourage more researchers to investigate AIEgens in LFP detection, contributing to forensic science.

Salicylaldehyde built fluorescent probe for dual sensing of Al3+, Zn2+ ions: Applications in latent fingerprint, bio-imaging & real sample analysis

This Schiff base chemosensor (SNN) detected dual ions, Al3+ and Zn2+ ions selectively. Fluorescence spectrum investigations showed that Al3+ ions increased fluorescence intensity, notably at 493 nm. Introducing Zn2+ ions caused a significant blue shift of roughly ∼65 nm at a wavelength of 434 nm, resulting in a notable change in fluorescence intensity. When binding Al3+/Zn2+ ions, the SNN receptor uses three methods. Inhibition of photoinduced electron transfer (PET), excited state intramolecular proton transfer (ESIPT), and restriction of CN isomerization. The jobs plot method found that SNN + Al3+ and SNN + Zn2+ complexations had a 1:1 stoichiometry. DFT, LC-HRMS, and 1H NMR titration confirm this conclusion. The probe SNN's limit of detection (LOD) for Al3+/Zn2+ ions was 3.99 nM and 1.33 nM. Latent fingerprint (LFP), food samples, pharmaceutical products, and E. coli pathogen bio-imaging have all used the SNN probe to identify Al3+ and Zn2+ ions.

Solvatochromism of new tetraphenylethene luminogens: integration of aggregation-induced emission and conjugation-induced rigidity for emitting strongly in both solid and solution state

In this study, we synthesized and characterized four tetraphenylethene (TPE) analogs, investigated their photophysical properties, and conducted quantum chemical calculations. Some molecules exhibited aggregation-induced emission enhancement behavior and showed efficient emission in both solid and solution states. Solvatochromism was observed in particular derivatives, with solvent polarity influencing either a bathochromic or hypsochromic shift, indicating the occurrence of photoinduced intramolecular charge transfer (ICT) processes. Quantum chemical calculations confirmed that variations in molecular packing and rigidity among the TPE analogs contributed to their diverse behavior. The study showcases aggregation in luminophores without significant impact on the excited state and highlights how minor alterations in terminal substituents can lead to unconventional behavior. These findings have implications for the development of luminescent materials. Furthermore, the synthesized compounds exhibited biocompatibility, suggesting their potential for cell imaging applications.

Microwave-assisted synthesis of GdOF: Eu3+/Tb3+ ultrafine phosphor powders suitable for advanced forensic and security ink applications

The rare-earth-doped inorganic ultrafine oxyfluoride host matrices in forensic science, especially in latent fingerprint detection and anti-counterfeiting applications, were still unexplored and may replace the existing technology owing to its high sensitivity. Herein, GdOF: Eu³⁺/Tb³⁺ ultrafine red and green phosphors were synthesized via a rapid, green microwave-assisted hydrothermal method at 150 °C. The phosphors synthesized by this novel method possess good luminescent intensity for the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ and ⁵D₄→⁷F₅ transition of Tb³⁺ ions as compared to the phosphors prepared via other conventional methods such as co-precipitation synthesis, sol-gel synthesis, and microwave-assisted co-precipitation synthesis. Further, an enhancement in the luminescent intensity of the ultrafine phosphor was noticed when the microwave parameters and pH values were tuned. The optimized red and green phosphors having high luminescence intensity, good color purity, and high quantum yields of 89.3%, and 71.2%, respectively, were used for the visualization of latent fingerprints on various substrates. These promising phosphors exhibited excellent visualization regardless of the background interference and limit the risk of duplication and are highly reliable. The security inks developed using these phosphors are highly efficient for anti-counterfeiting applications. These multifunctional properties of investigated phosphors can be explored for security applications.

Cross-Linking Induced Emission of Polymer Micelles for High-Contrast Visualization Level 3 Details of Latent Fingerprints

Rationally developing an intelligent tool for high-contrast fluorescence imaging of latent fingerprints (LFPs) is gaining much concern in many applications such as medical diagnostics and forensic investigations. Herein, the off-on fluorescent polymer micelles (PMs) have been rationally designed and synthesized for high-contrast fluorescence imaging of LFPs through the cross-linking reaction of hydrazine (N₂H₄) and aldehyde group of polymer. Excitingly, the cross-linking (N₂H₄) induced emission of PMs has the property of aggregation-induced emission (AIE) and excited state intramolecular proton transfer (ESIPT), which could effectively address the notorious aggregation-caused quenching (ACQ) effects of conventional organic dyes. In addition, the cross-linking strategy can not only improve structural stability of PMs but also enhance its fluorescence brightness. The experiment results demonstrated that PMs showed high water dispersibility (100% aqueous solution), high selectivity, large Stokes shift (∼150 nm), good photostability, and excellent long-term stability. Because of the hydrophobic interaction between the PMs and fingerprint components, the PMs preferentially adhered onto the ridges of fingerprint, and then cross-linking (N₂H₄) induced emission properties endowed the PMs for high-contrast imaging of LFPs in different substrates, especially the levels 1-3 details of LFPs. We expect that this strategy will provide vital support for LFPs technology.

A fluorescent molecular rotor for the in situ imaging of latent fingerprints

We developed a fluorescent molecular rotor that responds to hydrophobic and viscous environments and visualizes latent fingerprints with level 3 details.

Achieving Molecular Fluorescent Conversion from Aggregation-Caused Quenching to Aggregation-Induced Emission by Positional Isomerization

In this work, we synthesized a pair of positional isomers by attaching a small electron-donating pyrrolidinyl group at ortho- and para-positions of a conjugated core. These isomers exhibited totally different fluorescent properties. PDB2 exhibited obvious aggregation-induced emission properties. In contrast, PDB4 showed the traditional aggregation-caused quenching effect. Their different fluorescent properties were investigated by absorption spectroscopy, fluorescence spectroscopy, density functional theory calculations and single-crystal structural analysis. These results indicated that the substituent position of the pyrrolidinyl groups affects the twisted degree of the isomers, which further induces different molecular packing modes, thus resulting in different fluorescent properties of these two isomers. This molecular design concept provided a new accurate strategy for designing new aggregation-induced emission luminogens.

Aggregation induced emission based active conjugated imidazole luminogens for visualization of latent fingerprints and multiple anticounterfeiting applications

Aggregation-induced emission based organic heterocyclic luminogens bearing conjugated electronic structures showed much attention due to its excellent fluorescence in aggregation state. In this communication, a novel conjugated blue light emitting imidazole molecule is synthesized by one pot multicomponent reaction route is reported for the first time. The prepared molecule exhibits a strong fluorescence in aggregation state with exceptional properties, such as high purity, inexpensive, eco-friendly, large scale production, high photostability, etc. By considering these advantages, a new fluorescence based platform has been setup for in-situ visualization of latent fingerprints and its preservation by spray method followed by Poly(vinyl alcohol) masking. A clear and well defined fluorescence fingerprint images are noticed on variety of surfaces by revealing level 1-3 ridge features upon ultraviolet 365 nm light exposure. The dual nature of binding specificity as well as excellent fluorescence properties permits the visualization of latent fingerprints for longer durations (up to 365 days) with superior contrast, high sensitivity, efficiency, selectivity and minimal background hindrance. We further fabricated unclonable invisible security ink for various printing modes on valuable goods for protection against forging. The developed labels are displaying uniform distribution of ink and exceptional stability under various atmospheric environments. The development of long preservative information using aggregation-induced emission based luminogen opens up a new avenue in advanced forensic and data security applications.

Lighting up forensic science by aggregation-induced emission: A review

Forensic science requires a fast, sensitive, and anti-interfering imaging tool for on-site investigation and bio-analysis. The aggregation-induced emission (AIE) phenomenon exhibits remarkable luminescence properties (large Stokes shift, diverse molecular structures, and high photo-stability), which can provide a viable solution for on-site analysis, while at the same time overcoming the problem of aggregation-caused quenching (ACQ). Based on the outstanding performance in chemical analysis and bio-sensing, AIE materials have great prospects in the field of forensic science. Therefore, the application of AIE in forensic science has been summarized for the first time in this article. After a brief introduction to the concept and development of AIE, its applications in the determination of toxic or hazardous substances, based on data on poisoning deaths, has been summarized. Subsequently, besides the bio-imaging function, other applications of AIE in analyzing markers related to forensic genetics, forensic pathology, (focusing on the corpse) and clinical forensics (focusing on the living) have been discussed. In addition, applications of AIE molecules in criminal investigations, including recognition of fingerprints and blood stains, detection of explosives and chemical warfare agents, and anti-counterfeiting have also been presented. It is hoped that this review will light up the future of forensic science by stimulating more research work on the suitability of AIE materials in advancing forensic science.

Recent Trends in Fluorescent Organic Materials for Latent Fingerprint Imaging

Fingerprints are an important kind of material evidence with the key function in personal identification, which are unique and life-long to everyone. Latent (invisible) fingerprints are common at the crime scene, needing to be visualized with proper methods in order to identify sources of the fingerprints in routine forensic practice. Fluorescent imaging of latent fingerprints has the advantage of high contrast, sensitivity, selectivity, and less dependency on instruments. Taking the environment and users' safety into consideration, organic materials for fluorescent imaging of latent fingerprints are reviewed mainly in recent 5 years. New strategies of fingerprint reagents and improved performances established for fingerprint development based on fluorescent organic materials are discussed in the view of forensic practice. In addition, we briefly highlight current challenges of recent fluorescent imaging works based on organic materials for the latent fingerprints development in forensic practice.

Synthesis of Novel Biocompatible Thienopyrimidine Chromophores with Aggregation-Induced Emission Sensitive to Molecular Aggregation

Biocompatible luminogens with aggregation-induced emission (AIE) have several applications in the biology field, such as in detecting biomacromolecules bioprobes and in bio-imaging. Due to their bioactivities and light-emitting properties, many heterocyclic compounds are good candidates for such applications. However, heterocyclic π-conjugated systems with AIE behavior remain rare as strong intermolecular π-π interactions usually quench their emission. In this work, new thienopyrimidine heterocyclic compounds were synthesized and their structures were verified by elemental analysis and Fourier transform infrared (FT-IR), 1H nuclear magnetic resonance (NMR), and 13C NMR spectra. The photophysical properties of some compounds were investigated in the solution and solid states. Density functional theory calculations were also performed to confirm the observed photophysical properties of the compounds. The studied dyes displayed AIE properties with spectral shapes related to the aggregate structure and a quantum yield up to 10.8%. The emission efficiency of the powder is attributed to the incorporation of multiply rotatable and twisted aryl groups to the fused heterocyclic moieties. The dyes also showed high thermal stability and potent antimicrobial activities against numerous bacterial and fungal strains. Additionally, the cytotoxicity of the new compounds was evaluated against the Caco-2 cell line, and molecular docking was used to investigate the binding conformation of the most effective compound with the MNK2 enzyme. Therefore, the presented structures may potentially be used for bioapplications.

Interpol review of fingermarks and other body impressions 2016-2019

This review paper covers the forensic-relevant literature in fingerprint and bodily impression sciences from 2016 to 2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/content/download/14458/file/Interpol%20 Review%20 Papers%202019. pdf.